管壳码全0判断

checker_gen1.uvprojx

@@ -10,7 +10,7 @@
       <TargetName>app</TargetName>
       <ToolsetNumber>0x4</ToolsetNumber>
       <ToolsetName>ARM-ADS</ToolsetName>
-      <pCCUsed>5060960::V5.06 update 7 (build 960)::.\ARMCC</pCCUsed>
+      <pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
       <uAC6>0</uAC6>
       <TargetOption>
         <TargetCommonOption>
@@ -185,7 +185,6 @@
             <uocXRam>0</uocXRam>
             <RvdsVP>2</RvdsVP>
             <RvdsMve>0</RvdsMve>
-            <RvdsCdeCp>0</RvdsCdeCp>
             <hadIRAM2>1</hadIRAM2>
             <hadIROM2>0</hadIROM2>
             <StupSel>8</StupSel>
@@ -352,7 +351,7 @@
             <NoWarn>0</NoWarn>
             <uSurpInc>0</uSurpInc>
             <useXO>0</useXO>
-            <ClangAsOpt>4</ClangAsOpt>
+            <uClangAs>0</uClangAs>
             <VariousControls>
               <MiscControls></MiscControls>
               <Define></Define>
@@ -1550,7 +1549,6 @@
             <uocXRam>0</uocXRam>
             <RvdsVP>2</RvdsVP>
             <RvdsMve>0</RvdsMve>
-            <RvdsCdeCp>0</RvdsCdeCp>
             <hadIRAM2>1</hadIRAM2>
             <hadIROM2>0</hadIROM2>
             <StupSel>8</StupSel>
@@ -1717,7 +1715,7 @@
             <NoWarn>0</NoWarn>
             <uSurpInc>0</uSurpInc>
             <useXO>0</useXO>
-            <ClangAsOpt>4</ClangAsOpt>
+            <uClangAs>0</uClangAs>
             <VariousControls>
               <MiscControls></MiscControls>
               <Define></Define>
@@ -2084,6 +2082,57 @@
               <FileName>if_uart.c</FileName>
               <FileType>1</FileType>
               <FilePath>.\source\interface\if_uart.c</FilePath>
+              <FileOption>
+                <CommonProperty>
+                  <UseCPPCompiler>2</UseCPPCompiler>
+                  <RVCTCodeConst>0</RVCTCodeConst>
+                  <RVCTZI>0</RVCTZI>
+                  <RVCTOtherData>0</RVCTOtherData>
+                  <ModuleSelection>0</ModuleSelection>
+                  <IncludeInBuild>0</IncludeInBuild>
+                  <AlwaysBuild>2</AlwaysBuild>
+                  <GenerateAssemblyFile>2</GenerateAssemblyFile>
+                  <AssembleAssemblyFile>2</AssembleAssemblyFile>
+                  <PublicsOnly>2</PublicsOnly>
+                  <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
+                  <ComprImg>1</ComprImg>
+                </CommonProperty>
+                <FileArmAds>
+                  <Cads>
+                    <interw>2</interw>
+                    <Optim>0</Optim>
+                    <oTime>2</oTime>
+                    <SplitLS>2</SplitLS>
+                    <OneElfS>2</OneElfS>
+                    <Strict>2</Strict>
+                    <EnumInt>2</EnumInt>
+                    <PlainCh>2</PlainCh>
+                    <Ropi>2</Ropi>
+                    <Rwpi>2</Rwpi>
+                    <wLevel>0</wLevel>
+                    <uThumb>2</uThumb>
+                    <uSurpInc>2</uSurpInc>
+                    <uC99>2</uC99>
+                    <uGnu>2</uGnu>
+                    <useXO>2</useXO>
+                    <v6Lang>0</v6Lang>
+                    <v6LangP>0</v6LangP>
+                    <vShortEn>2</vShortEn>
+                    <vShortWch>2</vShortWch>
+                    <v6Lto>2</v6Lto>
+                    <v6WtE>2</v6WtE>
+                    <v6Rtti>2</v6Rtti>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
+                  </Cads>
+                </FileArmAds>
+              </FileOption>
             </File>
             <File>
               <FileName>if_rtt.c</FileName>
@@ -2279,7 +2328,7 @@
                     <NoWarn>2</NoWarn>
                     <uSurpInc>2</uSurpInc>
                     <useXO>2</useXO>
-                    <ClangAsOpt>0</ClangAsOpt>
+                    <uClangAs>2</uClangAs>
                     <VariousControls>
                       <MiscControls></MiscControls>
                       <Define></Define>
@@ -3203,7 +3252,7 @@
                 <NoWarn>2</NoWarn>
                 <uSurpInc>2</uSurpInc>
                 <useXO>2</useXO>
-                <ClangAsOpt>0</ClangAsOpt>
+                <uClangAs>2</uClangAs>
                 <VariousControls>
                   <MiscControls></MiscControls>
                   <Define></Define>
@@ -3297,7 +3346,7 @@
                 <NoWarn>2</NoWarn>
                 <uSurpInc>2</uSurpInc>
                 <useXO>2</useXO>
-                <ClangAsOpt>0</ClangAsOpt>
+                <uClangAs>2</uClangAs>
                 <VariousControls>
                   <MiscControls></MiscControls>
                   <Define></Define>
@@ -4014,7 +4063,7 @@
                 <NoWarn>2</NoWarn>
                 <uSurpInc>2</uSurpInc>
                 <useXO>2</useXO>
-                <ClangAsOpt>0</ClangAsOpt>
+                <uClangAs>2</uClangAs>
                 <VariousControls>
                   <MiscControls></MiscControls>
                   <Define></Define>
@@ -4168,7 +4217,7 @@
                 <NoWarn>2</NoWarn>
                 <uSurpInc>2</uSurpInc>
                 <useXO>2</useXO>
-                <ClangAsOpt>0</ClangAsOpt>
+                <uClangAs>2</uClangAs>
                 <VariousControls>
                   <MiscControls></MiscControls>
                   <Define></Define>
@@ -4247,7 +4296,7 @@
                 <NoWarn>2</NoWarn>
                 <uSurpInc>2</uSurpInc>
                 <useXO>2</useXO>
-                <ClangAsOpt>0</ClangAsOpt>
+                <uClangAs>2</uClangAs>
                 <VariousControls>
                   <MiscControls></MiscControls>
                   <Define></Define>

python/file/EX_Coder_Test_2023-07-7.json

@@ -0,0 +1,785 @@
+{
+  "PlanID": 48631940,
+  "PlanBrief": "模拟工厂注码",
+  "CheckSoftVersion": [
+    1
+  ],
+  "CheckHardVersion": [
+    1
+  ],
+  "TimeOutS": 4,
+  "TimeOutM": 10,
+  "TimeOutUI": 12,
+  "TaskIDMax": 26,
+  "TaskArray": [
+    {
+      "TaskID": 0,
+      "TaskBrief": "电源准备",
+      "TaskIndex": 0,
+      "ParamCount": 1,
+      "ParamInfo": [
+        "预设电压1"
+      ],
+      "ParamVal": [
+        88
+      ],
+      "TestStandard": [],
+      "ReturnCount": 0,
+      "ReturnInfo": [],
+      "ErrJumpTo": 255,
+      "ExecuteErrCode": 254,
+      "ResultErrCode": [],
+      "RetryCount": 0
+    },
+    {
+      "TaskID": 1,
+      "TaskBrief": "上电充能",
+      "TaskIndex": 1,
+      "ParamCount": 3,
+      "ParamInfo": [
+        "总线电压",
+        "采样超时0.1ms",
+        "计时启停ADC"
+      ],
+      "ParamVal": [
+        88,
+        5000,
+        400
+      ],
+      "TestStandard": [
+        {
+          "Max": 95,
+          "Min": 80
+        },
+        {
+          "Max": 800,
+          "Min": 100
+        }
+      ],
+      "ReturnCount": 2,
+      "ReturnInfo": [
+        "总线电压",
+        "大于启停的时间"
+      ],
+      "ErrJumpTo": 255,
+      "ExecuteErrCode": 254,
+      "ResultErrCode": [
+        23,
+        22
+      ],
+      "RetryCount": 0
+    },
+    {
+      "TaskID": 5,
+      "TaskBrief": "写配置参数",
+      "TaskIndex": 2,
+      "ParamCount": 4,
+      "ParamInfo": [
+        "UID长度",
+        "密码长度",
+        "电流挡位",
+        "版本号"
+      ],
+      "ParamVal": [
+        8,
+        4,
+        0,
+        1
+      ],
+      "TestStandard": [],
+      "ReturnCount": 0,
+      "ReturnInfo": [],
+      "ErrJumpTo": 255,
+      "ExecuteErrCode": 28,
+      "ResultErrCode": [],
+      "RetryCount": 1
+    },
+    {
+      "TaskID": 32,
+      "TaskBrief": "加载配置",
+      "TaskIndex": 3,
+      "ParamCount": 0,
+      "ParamInfo": [],
+      "ParamVal": [],
+      "TestStandard": [
+        {
+          "Max": 8,
+          "Min": 8
+        },
+        {
+          "Max": 4,
+          "Min": 4
+        },
+        {
+          "Max": 1,
+          "Min": 1
+        }
+      ],
+      "ReturnCount": 3,
+      "ReturnInfo": [
+        "UID长度",
+        "密码长度",
+        "版本号"
+      ],
+      "ErrJumpTo": 255,
+      "ExecuteErrCode": 29,
+      "ResultErrCode": [
+        29,
+        29,
+        29,
+        255
+      ],
+      "RetryCount": 0
+    },
+    {
+      "TaskID": 3,
+      "TaskBrief": "获取总线电流(0.1uA)",
+      "TaskIndex": 4,
+      "ParamCount": 0,
+      "ParamInfo": [],
+      "ParamVal": [],
+      "TestStandard": [
+        {
+          "Max": 400,
+          "Min": 120
+        },
+        {
+          "Max": 400,
+          "Min": 120
+        }
+      ],
+      "ReturnCount": 2,
+      "ReturnInfo": [
+        "总线正电流",
+        "总线反电流"
+      ],
+      "ErrJumpTo": 255,
+      "ExecuteErrCode": 254,
+      "ResultErrCode": [
+        27,
+        27
+      ],
+      "RetryCount": 0
+    },
+    {
+      "TaskID": 4,
+      "TaskBrief": "扫描UID",
+      "TaskIndex": 5,
+      "ParamCount": 2,
+      "ParamInfo": [
+        "UID长度",
+        "使1/失0UID对比"
+      ],
+      "ParamVal": [
+        8,
+        0
+      ],
+      "TestStandard": [],
+      "ReturnCount": 0,
+      "ReturnInfo": [],
+      "ErrJumpTo": 14,
+      "ExecuteErrCode": 24,
+      "ResultErrCode": [],
+      "RetryCount": 0
+    },
+    {
+      "TaskID": 11,
+      "TaskBrief": "桥丝检测",
+      "TaskIndex": 6,
+      "ParamCount": 0,
+      "ParamInfo": [],
+      "ParamVal": [],
+      "TestStandard": [
+        {
+          "Max": 240,
+          "Min": 0
+        }
+      ],
+      "ReturnCount": 1,
+      "ReturnInfo": [
+        "桥丝ADC"
+      ],
+      "ErrJumpTo": 14,
+      "ExecuteErrCode": 30,
+      "ResultErrCode": [
+        30
+      ],
+      "RetryCount": 0
+    },
+    {
+      "TaskID": 8,
+      "TaskBrief": "充能统计",
+      "TaskIndex": 7,
+      "ParamCount": 5,
+      "ParamInfo": [
+        "充电挡位",
+        "统计超时",
+        "电流判线AD",
+        "充电结束值0.1uA",
+        "充电超时0.1S"
+      ],
+      "ParamVal": [
+        34,
+        5000,
+        100,
+        600,
+        5
+      ],
+      "TestStandard": [
+        {
+          "Max": 4000,
+          "Min": 1000
+        },
+        {
+          "Max": 600,
+          "Min": 120
+        },
+        {
+          "Max": 100,
+          "Min": 10
+        }
+      ],
+      "ReturnCount": 3,
+      "ReturnInfo": [
+        "充能值0.1ms",
+        "充末电流0.1uA",
+        "最大充电电流0.1mA"
+      ],
+      "ErrJumpTo": 255,
+      "ExecuteErrCode": 254,
+      "ResultErrCode": [
+        34,
+        35,
+        32,
+        255
+      ],
+      "RetryCount": 0
+    },
+    {
+      "TaskID": 24,
+      "TaskBrief": "状态码检测",
+      "TaskIndex": 8,
+      "ParamCount": 2,
+      "ParamInfo": [
+        "比较掩码",
+        "比较位"
+      ],
+      "ParamVal": [
+        130,
+        0
+      ],
+      "TestStandard": [
+        {
+          "Max": 255,
+          "Min": 0
+        }
+      ],
+      "ReturnCount": 1,
+      "ReturnInfo": [
+        "状态值"
+      ],
+      "ErrJumpTo": 14,
+      "ExecuteErrCode": 46,
+      "ResultErrCode": [
+        46
+      ],
+      "RetryCount": 0
+    },
+    {
+      "TaskID": 26,
+      "TaskBrief": "复位",
+      "TaskIndex": 9,
+      "ParamCount": 0,
+      "ParamInfo": [],
+      "ParamVal": [],
+      "TestStandard": [],
+      "ReturnCount": 0,
+      "ReturnInfo": [],
+      "ErrJumpTo": 255,
+      "ExecuteErrCode": 254,
+      "ResultErrCode": [],
+      "RetryCount": 0
+    },
+    {
+      "TaskID": 9,
+      "TaskBrief": "设置现场值",
+      "TaskIndex": 10,
+      "ParamCount": 3,
+      "ParamInfo": [
+        "编号",
+        "延时",
+        "孔号"
+      ],
+      "ParamVal": [
+        20,
+        100,
+        20
+      ],
+      "TestStandard": [],
+      "ReturnCount": 0,
+      "ReturnInfo": [],
+      "ErrJumpTo": 255,
+      "ExecuteErrCode": 254,
+      "ResultErrCode": [],
+      "RetryCount": 0
+    },
+    {
+      "TaskID": 19,
+      "TaskBrief": "时钟校准",
+      "TaskIndex": 11,
+      "ParamCount": 3,
+      "ParamInfo": [
+        " 1快速0全",
+        "校准周期",
+        "校准时长"
+      ],
+      "ParamVal": [
+        0,
+        1000,
+        110
+      ],
+      "TestStandard": [],
+      "ReturnCount": 0,
+      "ReturnInfo": [],
+      "ErrJumpTo": 255,
+      "ExecuteErrCode": 254,
+      "ResultErrCode": [],
+      "RetryCount": 0
+    },
+    {
+      "TaskID": 24,
+      "TaskBrief": "状态码检测",
+      "TaskIndex": 12,
+      "ParamCount": 2,
+      "ParamInfo": [
+        "比较掩码",
+        "比较位"
+      ],
+      "ParamVal": [
+        10,
+        10
+      ],
+      "TestStandard": [
+        {
+          "Max": 255,
+          "Min": 0
+        }
+      ],
+      "ReturnCount": 1,
+      "ReturnInfo": [
+        "状态值"
+      ],
+      "ErrJumpTo": 255,
+      "ExecuteErrCode": 46,
+      "ResultErrCode": [
+        255
+      ],
+      "RetryCount": 0
+    },
+    {
+      "TaskID": 10,
+      "TaskBrief": "比对现场值",
+      "TaskIndex": 13,
+      "ParamCount": 4,
+      "ParamInfo": [
+        "编号",
+        "延时",
+        "孔号",
+        "1使/0失反馈采集"
+      ],
+      "ParamVal": [
+        20,
+        100,
+        20,
+        1
+      ],
+      "TestStandard": [
+        {
+          "Max": 1700,
+          "Min": 800
+        },
+        {
+          "Max": 400,
+          "Min": 150
+        }
+      ],
+      "ReturnCount": 2,
+      "ReturnInfo": [
+        "最大反馈电流",
+        "最大反馈时间"
+      ],
+      "ErrJumpTo": 255,
+      "ExecuteErrCode": 255,
+      "ResultErrCode": [
+        43,
+        44,
+        255,
+        255
+      ],
+      "RetryCount": 0
+    },
+    {
+      "TaskID": 27,
+      "TaskBrief": "关总线",
+      "TaskIndex": 14,
+      "ParamCount": 0,
+      "ParamInfo": [],
+      "ParamVal": [],
+      "TestStandard": [],
+      "ReturnCount": 0,
+      "ReturnInfo": [],
+      "ErrJumpTo": 255,
+      "ExecuteErrCode": 254,
+      "ResultErrCode": [],
+      "RetryCount": 0
+    }
+  ],
+  "MajorErrInfo": [
+    {
+      "Info": "执行成功",
+      "MajorErrCode": 0,
+      "SubErrCode": []
+    },
+    {
+      "Info": "检测器异常",
+      "MajorErrCode": 1,
+      "SubErrCode": [
+        21,
+        23,
+        254
+      ]
+    },
+    {
+      "Info": "主电容异常",
+      "MajorErrCode": 2,
+      "SubErrCode": [
+        30,
+        31,
+        32,
+        33,
+        34,
+        35,
+        42
+      ]
+    },
+    {
+      "Info": "接触异常",
+      "MajorErrCode": 3,
+      "SubErrCode": [
+        27
+      ]
+    },
+    {
+      "Info": "桥丝阻值异常",
+      "MajorErrCode": 4,
+      "SubErrCode": [
+        30,
+        41,
+        42
+      ]
+    },
+    {
+      "Info": "芯片异常",
+      "MajorErrCode": 5,
+      "SubErrCode": [
+        22,
+        24,
+        25,
+        26,
+        27,
+        28,
+        29,
+        30,
+        32,
+        33,
+        35,
+        36,
+        37,
+        38,
+        39,
+        40,
+        41,
+        42,
+        43,
+        44,
+        45
+      ]
+    },
+    {
+      "Info": "其他异常",
+      "MajorErrCode": 20,
+      "SubErrCode": [
+        255
+      ]
+    }
+  ],
+  "SubErrInfo": [
+    {
+      "Info": "预设电压异常",
+      "ErrCode": 21,
+      "ErrFac": [
+        "1.检测小板电压调节失效，存在无法设置的电压"
+      ]
+    },
+    {
+      "Info": "上电充能错误",
+      "ErrCode": 22,
+      "ErrFac": [
+        "1.检测器输出电压异常",
+        "2.模块上电容性负载大",
+        "3.模块基本电路异常"
+      ]
+    },
+    {
+      "Info": "电压设置异常",
+      "ErrCode": 23,
+      "ErrFac": [
+        "1.检测小板输出电压异常",
+        "2.外部短路，导致过流保护"
+      ]
+    },
+    {
+      "Info": "UID扫描错误",
+      "ErrCode": 24,
+      "ErrFac": [
+        "1.芯片通信异常",
+        "2.芯片内部存储的UID与参考UID不一致"
+      ]
+    },
+    {
+      "Info": "标记区验证错误",
+      "ErrCode": 25,
+      "ErrFac": [
+        "1.验证标志位没有置位（检测流程出错",
+        "2.芯片数据被擦写",
+        "3.通信异常"
+      ]
+    },
+    {
+      "Info": "通讯后电流错误",
+      "ErrCode": 26,
+      "ErrFac": [
+        "1.芯片执行指令异常",
+        "2.芯片通信接收功耗异常"
+      ]
+    },
+    {
+      "Info": "基本电流错误",
+      "ErrCode": 27,
+      "ErrFac": [
+        "1.芯片的静态功耗异常",
+        "2.检测器输出电压异常"
+      ]
+    },
+    {
+      "Info": "配置错误",
+      "ErrCode": 28,
+      "ErrFac": [
+        "1.芯片错误",
+        "2.通信异常"
+      ]
+    },
+    {
+      "Info": "验证配置",
+      "ErrCode": 29,
+      "ErrFac": [
+        "1.芯片内部数据与检测数据不一致，数据丢失",
+        "2.芯片通信异常",
+        "3.芯片数据被改写"
+      ]
+    },
+    {
+      "Info": "桥丝错误",
+      "ErrCode": 30,
+      "ErrFac": [
+        "1.桥丝开路，或阻值异常",
+        "2.芯片异常，检测不准"
+      ]
+    },
+    {
+      "Info": "高压充能错误",
+      "ErrCode": 31,
+      "ErrFac": [
+        "1.电容漏流",
+        "2.电容容值偏低或偏大",
+        "3.芯片充电漏流,充电回路或起爆回路",
+        "4.芯片高压基本电流偏大",
+        "5.芯片异常，充电电流偏小"
+      ]
+    },
+    {
+      "Info": "充电电流错误",
+      "ErrCode": 32,
+      "ErrFac": [
+        "1.芯片异常，充电电流符合指标"
+      ]
+    },
+    {
+      "Info": "高压充末电流错误",
+      "ErrCode": 33,
+      "ErrFac": [
+        "1.电容漏流",
+        "2.芯片充电回路漏流或起爆回路漏流",
+        "3.芯片高压基本电流偏大"
+      ]
+    },
+    {
+      "Info": "低压充电能量错误",
+      "ErrCode": 34,
+      "ErrFac": [
+        "1.电容漏流",
+        "2.电容容值偏低或偏大",
+        "3.芯片充电漏流,充电回路或起爆回路",
+        "4.芯片低压基本电流偏大",
+        "5.芯片异常，充电电流偏小",
+        "6.高压充电后不能放电"
+      ]
+    },
+    {
+      "Info": "低压充末电流错误",
+      "ErrCode": 35,
+      "ErrFac": [
+        "1.电容漏流",
+        "2.芯片充电回路漏流或起爆回路漏流",
+        "3.芯片基本功耗偏大"
+      ]
+    },
+    {
+      "Info": "写延时错误",
+      "ErrCode": 36,
+      "ErrFac": [
+        "1.芯片设置延时功能异常",
+        "2.通信异常"
+      ]
+    },
+    {
+      "Info": "读延时错误",
+      "ErrCode": 37,
+      "ErrFac": [
+        "1.芯片读延时功能异常",
+        "2.通信异常"
+      ]
+    },
+    {
+      "Info": "芯片程测错误",
+      "ErrCode": 38,
+      "ErrFac": [
+        "1.芯片成测标记错误，非全FFFF",
+        "2.通信异常"
+      ]
+    },
+    {
+      "Info": "时钟校准错误",
+      "ErrCode": 39,
+      "ErrFac": [
+        "1.检测器命令执行异常"
+      ]
+    },
+    {
+      "Info": "写工厂信息错误",
+      "ErrCode": 40,
+      "ErrFac": [
+        "1.OTP数据写入出错",
+        "2.通信异常"
+      ]
+    },
+    {
+      "Info": "模拟起爆错误",
+      "ErrCode": 41,
+      "ErrFac": [
+        "1.发送起爆指令后无应答"
+      ]
+    },
+    {
+      "Info": "芯片状态码异常",
+      "ErrCode": 42,
+      "ErrFac": [
+        "1.状态码与设置的掩码不匹配",
+        "2.通讯异常"
+      ]
+    },
+    {
+      "Info": "反馈电流错误",
+      "ErrCode": 43,
+      "ErrFac": [
+        "1.芯片异常，反馈电流不达标",
+        "2.检测器异常,采集电路不准"
+      ]
+    },
+    {
+      "Info": "反码时长错误",
+      "ErrCode": 44,
+      "ErrFac": [
+        "1.芯片异常，通讯无反码",
+        "2.通讯反码电流低，不能识别"
+      ]
+    },
+    {
+      "Info": "复位放电错误",
+      "ErrCode": 45,
+      "ErrFac": [
+        "1.高压充电后降压通讯异常",
+        "2.芯片复位不能正常放电",
+        "3.芯片异常，指令不执行"
+      ]
+    },
+    {
+      "Info": "状态标志错误",
+      "ErrCode": 46,
+      "ErrFac": [
+        "1.置位标志命令未执行",
+        "2.置位命令参数错误",
+        "3.电容电压检测失败",
+        "4,芯片异常，状态标志不能置位"
+      ]
+    },
+    {
+      "Info": "三码验证错误",
+      "ErrCode": 47,
+      "ErrFac": [
+        "1.扫描获取的UID和写入的UID不一致",
+        "2.密码不一致，验证标志位未置位",
+        "3.芯片状态标志异常，不能置位"
+      ]
+    },
+    {
+      "Info": "写管壳码",
+      "ErrCode": 48,
+      "ErrFac": [
+        "1.缓存空间数据验证错误",
+        "2.指令执行错误，未收到应答",
+        "3.芯片功能异常，指令执行失败"
+      ]
+    },
+    {
+      "Info": "写密码",
+      "ErrCode": 49,
+      "ErrFac": [
+        "1.缓存空间数据验证错误",
+        "2.指令执行错误，未收到应答",
+        "3.芯片功能异常，指令执行失败"
+      ]
+    },
+    {
+      "Info": "写现场值错误",
+      "ErrCode": 50,
+      "ErrFac": [
+        "1.UID不匹配",
+        "2.芯片内部的配置未设置正确",
+        "3.芯片功能异常，通信无反馈"
+      ]
+    },
+    {
+      "Info": "检测器执行异常",
+      "ErrCode": 254,
+      "ErrFac": [
+        "广播类命令执行错误"
+      ]
+    },
+    {
+      "Info": "返回参数判断",
+      "ErrCode": 255,
+      "ErrFac": []
+    }
+  ]
+}

python/prottcp.py

@@ -146,10 +146,9 @@ def arr_from_int(num:int):
 # 提取方案中的范围数据， 先max后min
 def scheme_get_task_range(j:json):
     t=bytearray()
-    return_count=j["ReturnCount"]
+    t+=arr_from_int(j["TaskID"])
-    t+=j["TaskID"]
+    t+=arr_from_int(j["TaskIndex"])
-    t+=j["TaskIndex"]
+    t+=arr_from_int(j["ReturnCount"])
-    t+=arr_from_int(return_count)
     t+=arr_from_int(j["ExecuteErrCode"])
     index=0
     for i in j["TestStandard"]:
@@ -438,18 +437,32 @@ class protu(QObject):
     # print("len=",len(d),d.hex(","))
     # send_file("COM5",0x32,f.name.split('/')[-1],f.read())
 
+
+
+def int2str(num:int):
+    s=str(num//100)
+    s=s+str(num%100//10)
+    s=s+str(num%10)
+    return s
+
+
 if __name__ == "__main__":
     u=protu()
     # u.init("utcp:7777")
     # u.send_file(0xee,"file/JQ_JCXB_V54.bin")
     # u.send_file(0xed,"../Objects/checker_gen1_app_20230602.bin")
-    u.cmd=0x34
+    u.cmd=0x30
-    print(u.encode(bytearray([0x0a,0x00])).hex(' '))
+    u.cmd_no=0x15|(0xaf<<8)
-    # with open("file/EX三码绑定测试2023-07-3.json","rb") as f:
+    print(u.encode(bytearray([0x00])).hex(' '))
+    # with open("file/EX_Coder_Test_2023-07-6.json","rb") as f:
     #     json_obj=json.loads(f.read())
     #     d=scheme_to_byte(json_obj)
     #     print("len=",len(d),d.hex(","))
     #     d+=scheme_to_host(json_obj)
+    
+    print(int2str(20))
+    s="{d:03d}".format(d=2)
+    print(s)
 
 
 # 开始检测

source/ReadMe.txt

@@ -138,4 +138,6 @@
     添加错误判断，未完成
 2023.7.6
     赋码仪添加错误判断,管壳码有0字节则不注码,直接返回失败
-    
+2023.7.7
+    boot没有同步app编译，升级app会导致之后添加的配置参数丢失
+    添加管壳码全'0'判断

source/coder/coder_judge.c

@@ -159,20 +159,20 @@ uint8_t coder_judge(const uint8_t *data)
   }
   
   // 检测电流
-  TASK_FIND_NEXT(4);
+  TASK_FIND_NEXT(3);
   temp=TASK_DATA(0);
   temp2=TASK_DATA(1);
-  if((temp<10)&&(temp2<10))
+  if((temp<100)&&(temp2<100))
   {
     // 接触异常
     return 3;
   }
-  else if(((temp>task->range[0].max)&&(temp<1500))||
+  else if(((temp>task->range[0].max)&&(temp<800))||
-    ((temp2>task->range[0].max)&&(temp2<1500)))
+    ((temp2>task->range[0].max)&&(temp2<800)))
   {
     // 过流
     return 7;
-  }else if((temp>1500)&&(temp2>1500))
+  }else if((temp>800)&&(temp2>800))
   {
     // 短路
     return 8;
@@ -180,7 +180,7 @@ uint8_t coder_judge(const uint8_t *data)
   
   
   // 检测uid
-  TASK_FIND_NEXT(5);
+  TASK_FIND_NEXT(4);
   if(get_ack(data,task->taskindex))
   {
     // 芯片错误
@@ -188,7 +188,7 @@ uint8_t coder_judge(const uint8_t *data)
   }
   
   // 检测桥丝
-  TASK_FIND_NEXT(6);
+  TASK_FIND_NEXT(11);
   temp=TASK_DATA(0);
   if((temp<task->range[0].min)||(temp>task->range[0].max))
   {

source/coder/coder_lib.c

@@ -87,6 +87,8 @@ int check_shell_code(const char *shell_code)
     if(shell_code[i]==0)
       return 0;
   }
+  if(strncmp("0000000000000",shell_code,13)==0)
+    return 0;
   return 1;
 }
 

source/main/compiler_info.h

@@ -6,7 +6,7 @@
 
 
 
-#define BUILD_DATE  "2023-07-06 22:57:16"
+#define BUILD_DATE  "2023-07-07 11:16:27"
 #define SOFT_VERSION  "0.10"
 
 

source/main/main.c

@@ -113,7 +113,7 @@ static int scheme_info(list_def *argv)
   for(int i=0;i<s->task_num;i++)
   {
     t=&s->task[i];
-    cmd_print("  task:%02d  err:%02x",i,t->err);
+    cmd_print("  task:%02d  id:%02d  err:%02x",t->taskindex,t->taskid,t->err);
     for(int j=0;j<t->item_num;j++)
     {
       cmd_print("    max:%5d, min:%5d err:%02x    %s",t->range[j].max,t->range[j].min,

source/task/key.c

@@ -68,6 +68,7 @@ static void request_check(void *p)
 {
   const sys_param_def *par=sys_param();
   array_def *d=arr_creat();
+  arr_append(d,0);
   emit key_send_signal(p,0x37,arr_temp(d));
   //DBG_LOG("tcp liver:%s",str_temp(arr_string(d)));
 }

source/task/tran_for_coder2.c

@@ -75,7 +75,6 @@ static void write_uid_upmit(write_uid_def *w)
     }
   }
   emit tran_send_signal(w->u.p,0x82,arr_temp(a));
-  tran_set_busy(w->u.p,0);
   g_self.step=0;
   // 把命令字改为0x82用于接收主机应答
   w->u.cmd=0x82;
@@ -83,6 +82,25 @@ static void write_uid_upmit(write_uid_def *w)
 
 
 
+// 填充注码结果
+static void write_uid_fillret(write_uid_def *w,int addr,int ack)
+{
+  addr-=1;
+  uint8_t *d=&w->ack[(addr)*39];
+  w->ack_num++;
+  d[0]=addr+slave_addr_off();
+  d[1]=ack;
+  memcpy(&d[2],w->item[addr].shell_code,13);
+  memcpy(&d[2+13],w->item[addr].uid_code,16);
+  memcpy(&d[2+13+16],w->item[addr].password,8);
+  if(w->ack_num>=10)
+  {
+    write_uid_upmit(w);
+  }
+}
+
+
+
 // 注码完成
 static void write_uid_end(ucport_def *u,port_mcu *src,void *data,int ack,char *err_str)
 {
@@ -92,19 +110,7 @@ static void write_uid_end(ucport_def *u,port_mcu *src,void *data,int ack,char *e
     DBG_WARN("addr err:%d",addr);
     return;
   }
-  addr-=1;
+  write_uid_fillret(w,addr,ack);
-  
-  uint8_t *d=&w->ack[(addr)*39];
-  w->ack_num++;
-  d[0]=addr+slave_addr_off();
-  d[1]=ack;
-  memcpy(&d[2],w->item[addr].shell_code,13);
-  memcpy(&d[2+13],w->item[addr].uid_code,16);
-  memcpy(&d[2+13+16],w->item[addr].password,8);
-  if(w->ack_num>=10)
-  {
-    write_uid_upmit(w);
-  }
 }
 
 
@@ -137,6 +143,7 @@ static void write_del(ucport_def *u)
 static int write_uid_dolater(ucport_def *u,uint8_t cmd,array_def *data,char *err_str)
 {
   DBG_LOG("recv write_uid end signal.");
+  tran_set_busy(u->p,0);
   return 0;
 }
 
@@ -191,11 +198,7 @@ static ucport_def *write_uid(tran_def *t, uint8_t cmd,array_def *data)
           port_start(mcu,code_creat(8,4,u->item[i].uid_pw_hex));
         }else{
           // 管壳码无效,不注码,此时默认已ack
-          u->ack_num++;
+          write_uid_fillret(u,i+1,0xff);
-          if(u->ack_num>=10)
-          {
-            write_uid_upmit(u);
-          }
         }
       }
     }
@@ -372,7 +375,7 @@ static void check_end(ucport_def *u,port_mcu *src,void *data,int ack,char *err_s
     arr_append(a,w->type);
     arr_appends(a,w->ack,(6)*10);
     emit tran_send_signal(w->u.p,0x81,arr_temp(a));
-    tran_set_busy(w->u.p,0);
+    //tran_set_busy(w->u.p,0);
     // 把命令字改为0x81用于接收主机应答
     w->u.cmd=0x81;
     g_self.step=1;
@@ -408,6 +411,7 @@ static void check_del(ucport_def *u)
 static int check_dolater(ucport_def *u,uint8_t cmd,array_def *data,char *err_str)
 {
   DBG_LOG("recv check end signal.");
+  tran_set_busy(u->p,0);
   return 0;
 }