{
  "PlanID": 49614980,
  "PlanBrief": "模拟工厂注码",
  "CheckSoftVersion": [
    1
  ],
  "CheckHardVersion": [
    1
  ],
  "TimeOutS": 4,
  "TimeOutM": 10,
  "TimeOutUI": 12,
  "TaskIDMax": 26,
  "TaskArray": [
    {
      "TaskID": 0,
      "TaskBrief": "电源准备",
      "TaskIndex": 0,
      "ParamCount": 1,
      "ParamInfo": [
        "预设电压1"
      ],
      "ParamVal": [
        88
      ],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 254,
      "ResultErrCode": [],
      "RetryCount": 0
    },
    {
      "TaskID": 1,
      "TaskBrief": "上电充能",
      "TaskIndex": 1,
      "ParamCount": 3,
      "ParamInfo": [
        "总线电压",
        "采样超时0.1ms",
        "计时启停ADC"
      ],
      "ParamVal": [
        88,
        5000,
        400
      ],
      "TestStandard": [
        {
          "Max": 95,
          "Min": 80
        },
        {
          "Max": 800,
          "Min": 100
        }
      ],
      "ReturnCount": 2,
      "ReturnInfo": [
        "总线电压",
        "大于启停的时间"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 254,
      "ResultErrCode": [
        23,
        22
      ],
      "RetryCount": 0
    },
    {
      "TaskID": 32,
      "TaskBrief": "加载配置",
      "TaskIndex": 2,
      "ParamCount": 0,
      "ParamInfo": [],
      "ParamVal": [],
      "TestStandard": [
        {
          "Max": 8,
          "Min": 8
        },
        {
          "Max": 4,
          "Min": 4
        },
        {
          "Max": 1,
          "Min": 1
        }
      ],
      "ReturnCount": 3,
      "ReturnInfo": [
        "UID长度",
        "密码长度",
        "版本号"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 29,
      "ResultErrCode": [
        29,
        29,
        29,
        255
      ],
      "RetryCount": 0
    },
    {
      "TaskID": 3,
      "TaskBrief": "获取总线电流(0.1uA)",
      "TaskIndex": 3,
      "ParamCount": 0,
      "ParamInfo": [],
      "ParamVal": [],
      "TestStandard": [
        {
          "Max": 400,
          "Min": 120
        },
        {
          "Max": 400,
          "Min": 120
        }
      ],
      "ReturnCount": 2,
      "ReturnInfo": [
        "总线正电流",
        "总线反电流"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 254,
      "ResultErrCode": [
        27,
        27
      ],
      "RetryCount": 0
    },
    {
      "TaskID": 4,
      "TaskBrief": "扫描UID",
      "TaskIndex": 4,
      "ParamCount": 2,
      "ParamInfo": [
        "UID长度",
        "使1/失0UID对比"
      ],
      "ParamVal": [
        8,
        0
      ],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 14,
      "ExecuteErrCode": 24,
      "ResultErrCode": [],
      "RetryCount": 0
    },
    {
      "TaskID": 11,
      "TaskBrief": "桥丝检测",
      "TaskIndex": 5,
      "ParamCount": 0,
      "ParamInfo": [],
      "ParamVal": [],
      "TestStandard": [
        {
          "Max": 240,
          "Min": 0
        }
      ],
      "ReturnCount": 1,
      "ReturnInfo": [
        "桥丝ADC"
      ],
      "ErrJumpTo": 14,
      "ExecuteErrCode": 30,
      "ResultErrCode": [
        30
      ],
      "RetryCount": 0
    },
    {
      "TaskID": 8,
      "TaskBrief": "充能统计",
      "TaskIndex": 6,
      "ParamCount": 5,
      "ParamInfo": [
        "充电挡位",
        "统计超时",
        "电流判线AD",
        "充电结束值0.1uA",
        "充电超时0.1S"
      ],
      "ParamVal": [
        34,
        5000,
        100,
        600,
        5
      ],
      "TestStandard": [
        {
          "Max": 4000,
          "Min": 1000
        },
        {
          "Max": 600,
          "Min": 120
        },
        {
          "Max": 100,
          "Min": 10
        }
      ],
      "ReturnCount": 3,
      "ReturnInfo": [
        "充能值0.1ms",
        "充末电流0.1uA",
        "最大充电电流0.1mA"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 254,
      "ResultErrCode": [
        34,
        35,
        32,
        255
      ],
      "RetryCount": 0
    },
    {
      "TaskID": 24,
      "TaskBrief": "状态码检测",
      "TaskIndex": 7,
      "ParamCount": 2,
      "ParamInfo": [
        "比较掩码",
        "比较位"
      ],
      "ParamVal": [
        130,
        0
      ],
      "TestStandard": [
        {
          "Max": 255,
          "Min": 0
        }
      ],
      "ReturnCount": 1,
      "ReturnInfo": [
        "状态值"
      ],
      "ErrJumpTo": 14,
      "ExecuteErrCode": 46,
      "ResultErrCode": [
        46
      ],
      "RetryCount": 0
    },
    {
      "TaskID": 26,
      "TaskBrief": "复位",
      "TaskIndex": 8,
      "ParamCount": 0,
      "ParamInfo": [],
      "ParamVal": [],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 254,
      "ResultErrCode": [],
      "RetryCount": 0
    },
    {
      "TaskID": 9,
      "TaskBrief": "设置现场值",
      "TaskIndex": 9,
      "ParamCount": 3,
      "ParamInfo": [
        "编号",
        "延时",
        "孔号"
      ],
      "ParamVal": [
        20,
        100,
        20
      ],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 254,
      "ResultErrCode": [],
      "RetryCount": 0
    },
    {
      "TaskID": 19,
      "TaskBrief": "时钟校准",
      "TaskIndex": 10,
      "ParamCount": 3,
      "ParamInfo": [
        " 1快速0全",
        "校准周期",
        "校准时长"
      ],
      "ParamVal": [
        0,
        1000,
        110
      ],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 254,
      "ResultErrCode": [],
      "RetryCount": 0
    },
    {
      "TaskID": 24,
      "TaskBrief": "状态码检测",
      "TaskIndex": 11,
      "ParamCount": 2,
      "ParamInfo": [
        "比较掩码",
        "比较位"
      ],
      "ParamVal": [
        10,
        10
      ],
      "TestStandard": [
        {
          "Max": 255,
          "Min": 0
        }
      ],
      "ReturnCount": 1,
      "ReturnInfo": [
        "状态值"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 46,
      "ResultErrCode": [
        255
      ],
      "RetryCount": 0
    },
    {
      "TaskID": 10,
      "TaskBrief": "比对现场值",
      "TaskIndex": 12,
      "ParamCount": 4,
      "ParamInfo": [
        "编号",
        "延时",
        "孔号",
        "1使/0失反馈采集"
      ],
      "ParamVal": [
        20,
        100,
        20,
        1
      ],
      "TestStandard": [
        {
          "Max": 1700,
          "Min": 800
        },
        {
          "Max": 400,
          "Min": 150
        }
      ],
      "ReturnCount": 2,
      "ReturnInfo": [
        "最大反馈电流",
        "最大反馈时间"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 255,
      "ResultErrCode": [
        43,
        44,
        255,
        255
      ],
      "RetryCount": 0
    },
    {
      "TaskID": 27,
      "TaskBrief": "关总线",
      "TaskIndex": 13,
      "ParamCount": 0,
      "ParamInfo": [],
      "ParamVal": [],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 254,
      "ResultErrCode": [],
      "RetryCount": 0
    }
  ],
  "MajorErrInfo": [
    {
      "Info": "执行成功",
      "MajorErrCode": 0,
      "SubErrCode": []
    },
    {
      "Info": "检测器异常",
      "MajorErrCode": 1,
      "SubErrCode": [
        21,
        23
      ]
    },
    {
      "Info": "主电容异常",
      "MajorErrCode": 2,
      "SubErrCode": [
        31,
        32,
        33,
        34,
        35
      ]
    },
    {
      "Info": "接触异常",
      "MajorErrCode": 3,
      "SubErrCode": [
        27,
        37
      ]
    },
    {
      "Info": "桥丝阻值异常",
      "MajorErrCode": 4,
      "SubErrCode": [
        30
      ]
    },
    {
      "Info": "芯片异常",
      "MajorErrCode": 5,
      "SubErrCode": [
        22,
        24,
        25,
        26,
        27,
        28,
        29,
        36,
        37,
        38,
        39,
        40,
        41,
        42,
        43,
        44,
        45,
        46,
        47,
        48,
        49,
        50
      ]
    },
    {
      "Info": "其他异常",
      "MajorErrCode": 20,
      "SubErrCode": [
        255,
        254
      ]
    }
  ],
  "SubErrInfo": [
    {
      "Info": "预设电压异常",
      "ErrCode": 21,
      "ErrFac": [
        "1.检测小板电压调节失效，存在无法设置的电压"
      ]
    },
    {
      "Info": "上电充能错误",
      "ErrCode": 22,
      "ErrFac": [
        "1.检测器输出电压异常",
        "2.模块上电容性负载大",
        "3.模块基本电路异常"
      ]
    },
    {
      "Info": "电压设置异常",
      "ErrCode": 23,
      "ErrFac": [
        "1.检测小板输出电压异常",
        "2.外部短路，导致过流保护"
      ]
    },
    {
      "Info": "UID扫描错误",
      "ErrCode": 24,
      "ErrFac": [
        "1.芯片通信异常",
        "2.芯片内部存储的UID与参考UID不一致"
      ]
    },
    {
      "Info": "标记区验证错误",
      "ErrCode": 25,
      "ErrFac": [
        "1.验证标志位没有置位（检测流程出错",
        "2.芯片数据被擦写",
        "3.通信异常"
      ]
    },
    {
      "Info": "通讯后电流错误",
      "ErrCode": 26,
      "ErrFac": [
        "1.芯片执行指令异常",
        "2.芯片通信接收功耗异常"
      ]
    },
    {
      "Info": "基本电流错误",
      "ErrCode": 27,
      "ErrFac": [
        "1.芯片的静态功耗异常",
        "2.检测器输出电压异常"
      ]
    },
    {
      "Info": "配置错误",
      "ErrCode": 28,
      "ErrFac": [
        "1.芯片错误",
        "2.通信异常"
      ]
    },
    {
      "Info": "验证配置",
      "ErrCode": 29,
      "ErrFac": [
        "1.芯片内部数据与检测数据不一致，数据丢失",
        "2.芯片通信异常",
        "3.芯片数据被改写"
      ]
    },
    {
      "Info": "桥丝错误",
      "ErrCode": 30,
      "ErrFac": [
        "1.桥丝开路，或阻值异常",
        "2.芯片异常，检测不准"
      ]
    },
    {
      "Info": "高压充能错误",
      "ErrCode": 31,
      "ErrFac": [
        "1.电容漏流",
        "2.电容容值偏低或偏大",
        "3.芯片充电漏流,充电回路或起爆回路",
        "4.芯片高压基本电流偏大",
        "5.芯片异常，充电电流偏小"
      ]
    },
    {
      "Info": "充电电流错误",
      "ErrCode": 32,
      "ErrFac": [
        "1.芯片异常，充电电流符合指标"
      ]
    },
    {
      "Info": "高压充末电流错误",
      "ErrCode": 33,
      "ErrFac": [
        "1.电容漏流",
        "2.芯片充电回路漏流或起爆回路漏流",
        "3.芯片高压基本电流偏大"
      ]
    },
    {
      "Info": "低压充电能量错误",
      "ErrCode": 34,
      "ErrFac": [
        "1.电容漏流",
        "2.电容容值偏低或偏大",
        "3.芯片充电漏流,充电回路或起爆回路",
        "4.芯片低压基本电流偏大",
        "5.芯片异常，充电电流偏小",
        "6.高压充电后不能放电"
      ]
    },
    {
      "Info": "低压充末电流错误",
      "ErrCode": 35,
      "ErrFac": [
        "1.电容漏流",
        "2.芯片充电回路漏流或起爆回路漏流",
        "3.芯片基本功耗偏大"
      ]
    },
    {
      "Info": "写延时错误",
      "ErrCode": 36,
      "ErrFac": [
        "1.芯片设置延时功能异常",
        "2.通信异常"
      ]
    },
    {
      "Info": "读延时错误",
      "ErrCode": 37,
      "ErrFac": [
        "1.芯片读延时功能异常",
        "2.通信异常"
      ]
    },
    {
      "Info": "芯片程测错误",
      "ErrCode": 38,
      "ErrFac": [
        "1.芯片成测标记错误，非全FFFF",
        "2.通信异常"
      ]
    },
    {
      "Info": "时钟校准错误",
      "ErrCode": 39,
      "ErrFac": [
        "1.检测器命令执行异常"
      ]
    },
    {
      "Info": "写工厂信息错误",
      "ErrCode": 40,
      "ErrFac": [
        "1.OTP数据写入出错",
        "2.通信异常"
      ]
    },
    {
      "Info": "模拟起爆错误",
      "ErrCode": 41,
      "ErrFac": [
        "1.发送起爆指令后无应答"
      ]
    },
    {
      "Info": "芯片状态码异常",
      "ErrCode": 42,
      "ErrFac": [
        "1.状态码与设置的掩码不匹配",
        "2.通讯异常"
      ]
    },
    {
      "Info": "反馈电流错误",
      "ErrCode": 43,
      "ErrFac": [
        "1.芯片异常，反馈电流不达标",
        "2.检测器异常,采集电路不准"
      ]
    },
    {
      "Info": "反码时长错误",
      "ErrCode": 44,
      "ErrFac": [
        "1.芯片异常，通讯无反码",
        "2.通讯反码电流低，不能识别"
      ]
    },
    {
      "Info": "复位放电错误",
      "ErrCode": 45,
      "ErrFac": [
        "1.高压充电后降压通讯异常",
        "2.芯片复位不能正常放电",
        "3.芯片异常，指令不执行"
      ]
    },
    {
      "Info": "状态标志错误",
      "ErrCode": 46,
      "ErrFac": [
        "1.置位标志命令未执行",
        "2.置位命令参数错误",
        "3.电容电压检测失败",
        "4,芯片异常，状态标志不能置位"
      ]
    },
    {
      "Info": "三码验证错误",
      "ErrCode": 47,
      "ErrFac": [
        "1.扫描获取的UID和写入的UID不一致",
        "2.密码不一致，验证标志位未置位",
        "3.芯片状态标志异常，不能置位"
      ]
    },
    {
      "Info": "写管壳码",
      "ErrCode": 48,
      "ErrFac": [
        "1.缓存空间数据验证错误",
        "2.指令执行错误，未收到应答",
        "3.芯片功能异常，指令执行失败"
      ]
    },
    {
      "Info": "写密码",
      "ErrCode": 49,
      "ErrFac": [
        "1.缓存空间数据验证错误",
        "2.指令执行错误，未收到应答",
        "3.芯片功能异常，指令执行失败"
      ]
    },
    {
      "Info": "写现场值错误",
      "ErrCode": 50,
      "ErrFac": [
        "1.UID不匹配",
        "2.芯片内部的配置未设置正确",
        "3.芯片功能异常，通信无反馈"
      ]
    },
    {
      "Info": "检测器执行异常",
      "ErrCode": 254,
      "ErrFac": [
        "广播类命令执行错误"
      ]
    },
    {
      "Info": "返回参数判断",
      "ErrCode": 255,
      "ErrFac": []
    }
  ]
}