checker_slave/source/elec_det/base/define.h

#ifndef DEFINE_H_
#define DEFINE_H_
#include <stdio.h>
#include <string.h>
#include <rthw.h>
#include <rtthread.h>
#include "stm32f10x.h"
#include "misc.h"
#include "stm32f10x_adc.h"
#include "stm32f10x_dma.h"
#include "stm32f10x_gpio.h"
#include "stm32f10x_usart.h"
#include "stm32f10x_rcc.h"
#include "stm32f10x_tim.h"
#include "stm32f10x_dac.h"
#include "stm32f10x_i2c.h"



// 设置硬件版本
#define HARD_VERSION  2


#if HARD_VERSION==1
// 电压倍数，旧板子21 新板子11
#define V_PARAM_1  21
// 参数2 旧板子143 新板子178
#define V_PARAM_2  143
// 电阻放大倍数 旧板子16 新板子79.7
#define RES_MULTIPLE  16

#elif HARD_VERSION==2
// 电压倍数，旧板子21 新板子11
#define V_PARAM_1  11
// 参数2 旧板子143 新板子178
#define V_PARAM_2  178
// 电阻放大倍数 旧板子16 新板子79.7
#define RES_MULTIPLE  79.7

#endif








#define UNUSED(X) (void)X   

#define SoftVersion 0x000D


#if __IF_PORT_UART
//是否使用通信缓存
#define APP_COMM_USE_FIFO   0
//命令通信接口
#define APP_COMD_CAN       0
#define APP_COMD_USART     1

#else

//是否使用通信缓存
#define APP_COMM_USE_FIFO   1
//命令通信接口
#define APP_COMD_CAN       1
#define APP_COMD_USART     1

#endif


typedef enum{
        FUN_E     = ((uint8_t)0),//使能
        FUN_D     = ((uint8_t)1) //失能
}FUNState_e;

typedef union{
uint32_t ul_data;
uint16_t us_data;
uint8_t  uc_data;
uint16_t us_buf[2];
uint8_t  uc_buf[4];
}Seq_Buf_En;






// 模块程序地址
// 这个地址要和 dev_flash.c 中定义的地址相对应
#define MC_CODE_ADDR \
  (FLASH_BASE+2048*109+128)

// 方案地址
// 这个地址要和 dev_flash.c 中定义的地址相对应
#define APP_TEST_PLAN_ADDR \
  (FLASH_BASE+2048*118+128)

// 方案大小
#define APP_TEST_PLANINFO_SIZE  2048



//系统事件定义
#define U1_RX_FRAME_EVENT     0x01 
#define UART_MC_FRAME_EVENT   0x02
#define CAN_MC_FRAME_EVENT  	0x04
#define TRANS_FRAME_EVENT 		0x08

#define UART_TX_END_EVENT     1

#define EP1_CMD_FRAME_EVENT   1
#define EPJ_CMD_FRAME_EVENT   1
#define EP2_CMD_FRAME_EVENT   1

#define USART_APP_EXCE_EVENT  1
#define EP_HEARTBEAD_EVENT    5


/******************总线电压倍率*****/
#define VH_Mutli             21
#define VM_Mutli						 21
#define BOAED_SEQ_NUM_SIZE  20
extern struct rt_event usart1_rx_event;
#pragma pack(1)
typedef struct {
uint32_t bootflag; //更新标志
uint16_t resistor_diff;//
uint16_t hard_v;
uint32_t mc_ICodeCrc32;
uint8_t  sqNum[BOAED_SEQ_NUM_SIZE];
}BoardInfo_st;

typedef union{
BoardInfo_st boardinfo;
uint32_t ul_buf[32];
}BoardInfo_un;

typedef struct {

	uint8_t app_run_flag;
	uint8_t device_id;
	uint16_t chip_temp;
	uint16_t v2p5_adc;
	uint16_t v1p25_adc;
	uint16_t adc_shake;
	uint16_t bus_5p5v;
	uint16_t bus_26v;
	uint16_t hard_v;
	uint16_t soft_v;
	uint16_t resistor_diff;
	uint32_t plan_id;
	
}BoartCheck_st;

#pragma pack()

extern volatile BoartCheck_st board_st;
extern volatile BoardInfo_un  boardinfo_un;

//检测小板初始化
void Ye_BoardInit(void);
/*
 测试小板上电自检
*/
void Ye_BoardCheck(void);
//
uint8_t UidCode_YM2JQ(uint8_t* pstJQUID, uint8_t* pstYMUID);
 uint32_t GetPasswordByUidCode(uint8_t* uidcode);
#endif