{
  "PlanID": 48500867,
  "PlanBrief": "模拟工厂注码",
  "CheckSoftVersion": [
    1
  ],
  "CheckHardVersion": [
    1
  ],
  "TimeOutS": 4,
  "TimeOutM": 10,
  "TimeOutUI": 12,
  "TaskIDMax": 26,
  "TaskArray": [
    {
      "TaskID": 0,
      "TaskBrief": "电源准备",
      "TaskIndex": 0,
      "ParamCount": 1,
      "ParamInfo": [
        "预设电压1"
      ],
      "ParamVal": [
        88
      ],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 254,
      "ResultErrCode": [],
      "RetryCount": 0
    },
    {
      "TaskID": 1,
      "TaskBrief": "上电充能",
      "TaskIndex": 1,
      "ParamCount": 3,
      "ParamInfo": [
        "总线电压",
        "采样超时0.1ms",
        "计时启停ADC"
      ],
      "ParamVal": [
        88,
        5000,
        400
      ],
      "TestStandard": [
        {
          "Max": 95,
          "Min": 80
        },
        {
          "Max": 800,
          "Min": 100
        }
      ],
      "ReturnCount": 2,
      "ReturnInfo": [
        "总线电压",
        "大于启停的时间"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 254,
      "ResultErrCode": [
        23,
        22
      ],
      "RetryCount": 0
    },
    {
      "TaskID": 5,
      "TaskBrief": "写配置参数(正式删除)",
      "TaskIndex": 2,
      "ParamCount": 4,
      "ParamInfo": [
        "UID长度",
        "密码长度",
        "电流挡位",
        "版本号"
      ],
      "ParamVal": [
        8,
        4,
        0,
        1
      ],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 13,
      "ExecuteErrCode": 28,
      "ResultErrCode": [],
      "RetryCount": 1
    },
    {
      "TaskID": 32,
      "TaskBrief": "加载配置",
      "TaskIndex": 3,
      "ParamCount": 0,
      "ParamInfo": [],
      "ParamVal": [],
      "TestStandard": [
        {
          "Max": 8,
          "Min": 8
        },
        {
          "Max": 4,
          "Min": 4
        },
        {
          "Max": 1,
          "Min": 1
        }
      ],
      "ReturnCount": 3,
      "ReturnInfo": [
        "UID长度",
        "密码长度",
        "版本号"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 29,
      "ResultErrCode": [
        29,
        29,
        29,
        255
      ],
      "RetryCount": 0
    },
    {
      "TaskID": 4,
      "TaskBrief": "扫描UID",
      "TaskIndex": 4,
      "ParamCount": 2,
      "ParamInfo": [
        "UID长度",
        "使1/失0UID对比"
      ],
      "ParamVal": [
        8,
        0
      ],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 24,
      "ResultErrCode": [],
      "RetryCount": 0
    },
    {
      "TaskID": 11,
      "TaskBrief": "桥丝检测",
      "TaskIndex": 5,
      "ParamCount": 0,
      "ParamInfo": [],
      "ParamVal": [],
      "TestStandard": [
        {
          "Max": 240,
          "Min": 0
        }
      ],
      "ReturnCount": 1,
      "ReturnInfo": [
        "桥丝ADC"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 30,
      "ResultErrCode": [
        30
      ],
      "RetryCount": 0
    },
    {
      "TaskID": 8,
      "TaskBrief": "充能统计",
      "TaskIndex": 6,
      "ParamCount": 5,
      "ParamInfo": [
        "充电挡位",
        "统计超时",
        "电流判线AD",
        "充电结束值0.1uA",
        "充电超时0.1S"
      ],
      "ParamVal": [
        34,
        5000,
        100,
        600,
        5
      ],
      "TestStandard": [
        {
          "Max": 4000,
          "Min": 1000
        },
        {
          "Max": 600,
          "Min": 120
        },
        {
          "Max": 100,
          "Min": 10
        }
      ],
      "ReturnCount": 3,
      "ReturnInfo": [
        "充能值0.1ms",
        "充末电流0.1uA",
        "最大充电电流0.1mA"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 254,
      "ResultErrCode": [
        34,
        35,
        32,
        255
      ],
      "RetryCount": 0
    },
    {
      "TaskID": 24,
      "TaskBrief": "状态码检测",
      "TaskIndex": 7,
      "ParamCount": 2,
      "ParamInfo": [
        "比较掩码",
        "比较位"
      ],
      "ParamVal": [
        130,
        0
      ],
      "TestStandard": [
        {
          "Max": 255,
          "Min": 0
        }
      ],
      "ReturnCount": 1,
      "ReturnInfo": [
        "状态值"
      ],
      "ErrJumpTo": 15,
      "ExecuteErrCode": 46,
      "ResultErrCode": [
        46
      ],
      "RetryCount": 0
    },
    {
      "TaskID": 26,
      "TaskBrief": "复位",
      "TaskIndex": 8,
      "ParamCount": 0,
      "ParamInfo": [],
      "ParamVal": [],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 254,
      "ResultErrCode": [],
      "RetryCount": 0
    },
    {
      "TaskID": 9,
      "TaskBrief": "设置现场值",
      "TaskIndex": 9,
      "ParamCount": 3,
      "ParamInfo": [
        "编号",
        "延时",
        "孔号"
      ],
      "ParamVal": [
        20,
        100,
        20
      ],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 254,
      "ResultErrCode": [],
      "RetryCount": 0
    },
    {
      "TaskID": 19,
      "TaskBrief": "时钟校准",
      "TaskIndex": 10,
      "ParamCount": 3,
      "ParamInfo": [
        " 1快速0全",
        "校准周期",
        "校准时长"
      ],
      "ParamVal": [
        0,
        1000,
        110
      ],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 254,
      "ResultErrCode": [],
      "RetryCount": 0
    },
    {
      "TaskID": 24,
      "TaskBrief": "状态码检测",
      "TaskIndex": 11,
      "ParamCount": 2,
      "ParamInfo": [
        "比较掩码",
        "比较位"
      ],
      "ParamVal": [
        10,
        10
      ],
      "TestStandard": [
        {
          "Max": 255,
          "Min": 0
        }
      ],
      "ReturnCount": 1,
      "ReturnInfo": [
        "状态值"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 46,
      "ResultErrCode": [
        255
      ],
      "RetryCount": 0
    },
    {
      "TaskID": 10,
      "TaskBrief": "比对现场值",
      "TaskIndex": 12,
      "ParamCount": 4,
      "ParamInfo": [
        "编号",
        "延时",
        "孔号",
        "1使/0失反馈采集"
      ],
      "ParamVal": [
        20,
        100,
        20,
        1
      ],
      "TestStandard": [
        {
          "Max": 1700,
          "Min": 800
        },
        {
          "Max": 400,
          "Min": 150
        }
      ],
      "ReturnCount": 2,
      "ReturnInfo": [
        "最大反馈电流",
        "最大反馈时间"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 255,
      "ResultErrCode": [
        43,
        44,
        255,
        255
      ],
      "RetryCount": 0
    },
    {
      "TaskID": 27,
      "TaskBrief": "关总线",
      "TaskIndex": 13,
      "ParamCount": 0,
      "ParamInfo": [],
      "ParamVal": [],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 254,
      "ResultErrCode": [],
      "RetryCount": 0
    }
  ]
}