{
  "PlanID": 15,
  "PlanBrief": "电解电容雷管厂高压检测",
  "CheckSoftVersion": [
    6,
    7,
    8
  ],
  "CheckHardVersion": [
    0,
    65535
  ],
  "TimeOutS": 34,
  "TimeOutM": 40,
  "TimeOutUI": 42,
  "TaskIDMax": 26,
  "MajorErrInfo": [
    {
      "Info": "执行成功",
      "MajorErrCode": 0,
      "SubErrCode": []
    },
    {
      "Info": "检测器异常",
      "MajorErrCode": 1,
      "SubErrCode": [
        21,
        23,
        254
      ]
    },
    {
      "Info": "主电容异常",
      "MajorErrCode": 2,
      "SubErrCode": [
        30,
        31,
        32,
        33,
        34,
        35,
        42
      ]
    },
    {
      "Info": "接触异常",
      "MajorErrCode": 3,
      "SubErrCode": [
        27
      ]
    },
    {
      "Info": "桥丝阻值异常",
      "MajorErrCode": 4,
      "SubErrCode": [
        30,
        41,
        42
      ]
    },
    {
      "Info": "芯片异常",
      "MajorErrCode": 5,
      "SubErrCode": [
        22,
        24,
        25,
        26,
        27,
        28,
        29,
        30,
        32,
        33,
        35,
        36,
        37,
        38,
        39,
        40,
        41,
        42,
        43,
        44,
        45
      ]
    },
    {
      "Info": "其他异常",
      "MajorErrCode": 20,
      "SubErrCode": [
        255
      ]
    },
    {
      "Info": "通信失败",
      "MajorErrCode": 208,
      "SubErrCode": [
      ]
    },
    {
      "Info": "脚本执行失败",
      "MajorErrCode": 209,
      "SubErrCode": [
      ]
    },
    {
      "Info": "数据长度与方案不符",
      "MajorErrCode": 210,
      "SubErrCode": [
      ]
    },
    {
      "Info": "方案ID不符",
      "MajorErrCode": 211,
      "SubErrCode": [
      ]
    },
    {
      "Info": "检测项目不足，无法判定",
      "MajorErrCode": 212,
      "SubErrCode": [
      ]
    },
    {
      "Info": "数据不合规",
      "MajorErrCode": 213,
      "SubErrCode": [
      ]
    }
  ],
  "SubErrInfo": [
    {
      "Info": "预设电压异常",
      "ErrCode": 21
    },
    {
      "Info": "上电充能错误",
      "ErrCode": 22
    },
    {
      "Info": "电压设置异常",
      "ErrCode": 23
    },
    {
      "Info": "UID扫描错误",
      "ErrCode": 24
    },
    {
      "Info": "OTP错误",
      "ErrCode": 25
    },
    {
      "Info": "通讯电流错误",
      "ErrCode": 26
    },
    {
      "Info": "基本电流错误",
      "ErrCode": 27
    },
    {
      "Info": "读取芯片ID错误",
      "ErrCode": 28
    },
    {
      "Info": "密码验证错误",
      "ErrCode": 29
    },
    {
      "Info": "DAC比较错误",
      "ErrCode": 30
    },
    {
      "Info": "高压充能错误",
      "ErrCode": 31
    },
    {
      "Info": "充电电流错误",
      "ErrCode": 32
    },
    {
      "Info": "高压充末电流错误",
      "ErrCode": 33
    },
    {
      "Info": "低压充电能量错误",
      "ErrCode": 34
    },
    {
      "Info": "低压充末电流错误",
      "ErrCode": 35
    },
    {
      "Info": "写延时错误",
      "ErrCode": 36
    },
    {
      "Info": "读延时错误",
      "ErrCode": 37
    },
    {
      "Info": "芯片程测错误",
      "ErrCode": 38
    },
    {
      "Info": "时钟校准错误",
      "ErrCode": 39
    },
    {
      "Info": "写工厂信息错误",
      "ErrCode": 40
    },
    {
      "Info": "模拟起爆错误",
      "ErrCode": 41
    },
    {
      "Info": "芯片状态码异常",
      "ErrCode": 42
    },
    {
      "Info": "通信电流错误",
      "ErrCode": 43
    },
    {
      "Info": "反码时长错误",
      "ErrCode": 44
    },
    {
      "Info": "复位放电错误",
      "ErrCode": 45
    },
    {
      "Info": "检测器执行异常",
      "ErrCode": 254
    },
    {
      "Info": "返回参数判断",
      "ErrCode": 255
    }
  ],
  "TaskArray": [
    {
      "TaskID": 0,
      "TaskBrief": "电源准备",
      "TaskIndex": 0,
      "ParamCount": 7,
      "ParamInfo": [
        "预设电压1",
        "预设电压2",
        "预设电压3",
        "预设电压4",
        "预设电压5",
        "预设电压6",
        "预设电压7"
      ],
      "ParamVal": [
        65,
        80,
        85,
        175,
        205,
        215,
        255
      ],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 21,
      "ResultErrCode": [],
      "RetryCount": 1
    },
    {
      "TaskID": 1,
      "TaskBrief": "上电充能",
      "TaskIndex": 1,
      "ParamCount": 2,
      "ParamInfo": [
        "总线电压",
        "计时启停ADC"
      ],
      "ParamVal": [
        80,
        2500
      ],
      "TestStandard": [
        {
          "Max": 85,
          "Min": 75
        },
        {
          "Max": 900,
          "Min": 150
        }
      ],
      "ReturnCount": 2,
      "ReturnInfo": [
        "总线电压",
        "大于启停的时间"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 22,
      "ResultErrCode": [
        23,
        22
      ],
      "RetryCount": 1
    },
    {
      "TaskID": 4,
      "TaskBrief": "扫描UID",
      "TaskIndex": 2,
      "ParamCount": 2,
      "ParamInfo": [
        "使1/失0反码采集",
        "使0/失1UID全0验证"
      ],
      "ParamVal": [
        1,
        0
      ],
      "TestStandard": [
        {
          "Max": 90,
          "Min": 40
        },
        {
          "Max": 400,
          "Min": 250
        }
      ],
      "ReturnCount": 2,
      "ReturnInfo": [
        "最大反馈电流",
        "最大反馈时间"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 24,
      "ResultErrCode": [
        43,
        42,
        255,
        255,
        255,
        255,
        255,
        255
      ],
      "RetryCount": 1
    },
    {
      "TaskID": 3,
      "TaskBrief": "获取总线电流",
      "TaskIndex": 3,
      "ParamCount": 0,
      "ParamInfo": [],
      "ParamVal": [],
      "TestStandard": [
        {
          "Max": 260,
          "Min": 120
        },
        {
          "Max": 260,
          "Min": 120
        }
      ],
      "ReturnCount": 2,
      "ReturnInfo": [
        "总线正电流",
        "总线反电流"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 27,
      "ResultErrCode": [
        27,
        27
      ],
      "RetryCount": 0
    },
    {
      "TaskID": 6,
      "TaskBrief": "读取芯片代码",
      "TaskIndex": 4,
      "ParamCount": 0,
      "ParamInfo": [],
      "ParamVal": [],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 26,
      "ExecuteErrCode": 28,
      "ResultErrCode": [
        28
      ],
      "RetryCount": 1
    },
    {
      "TaskID": 2,
      "TaskBrief": "设置总线电压",
      "TaskIndex": 5,
      "ParamCount": 1,
      "ParamInfo": [
        "总线电压"
      ],
      "ParamVal": [
        205
      ],
      "TestStandard": [
        {
          "Max": 210,
          "Min": 200
        }
      ],
      "ReturnCount": 1,
      "ReturnInfo": [
        "总线电压"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 23,
      "ResultErrCode": [
        23
      ],
      "RetryCount": 1
    },
    {
      "TaskID": 3,
      "TaskBrief": "获取总线电流",
      "TaskIndex": 6,
      "ParamCount": 0,
      "ParamInfo": [],
      "ParamVal": [],
      "TestStandard": [
        {
          "Max": 270,
          "Min": 120
        },
        {
          "Max": 270,
          "Min": 120
        }
      ],
      "ReturnCount": 2,
      "ReturnInfo": [
        "总线正电流",
        "总线反电流"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 27,
      "ResultErrCode": [
        27,
        27
      ],
      "RetryCount": 0
    },
    {
      "TaskID": 11,
      "TaskBrief": "充能统计",
      "TaskIndex": 7,
      "ParamCount": 4,
      "ParamInfo": [
        "电流判线AD",
        "充电结束值0.1uA",
        "充电超时0.1S",
        "电流监控0.1S"
      ],
      "ParamVal": [
        1000,
        500,
        60,
        20
      ],
      "TestStandard": [
        {
          "Max": 20000,
          "Min": 13000
        },
        {
          "Max": 600,
          "Min": 120
        }
      ],
      "ReturnCount": 2,
      "ReturnInfo": [
        "充能值0.1ms",
        "充末电流0.1uA"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 31,
      "ResultErrCode": [
        31,
        32,
        255,
        255
      ],
      "RetryCount": 1
    },
    {
      "TaskID": 12,
      "TaskBrief": "充电电压检测",
      "TaskIndex": 8,
      "ParamCount": 2,
      "ParamInfo": [
        "起始DAC",
        "结束DAC"
      ],
      "ParamVal": [
        31,
        29
      ],
      "TestStandard": [
        {
          "Max": 31,
          "Min": 29
        }
      ],
      "ReturnCount": 1,
      "ReturnInfo": [
        "扫描通过的DAC"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 30,
      "ResultErrCode": [
        30
      ],
      "RetryCount": 1
    },
    {
      "TaskID": 2,
      "TaskBrief": "设置总线电压",
      "TaskIndex": 9,
      "ParamCount": 1,
      "ParamInfo": [
        "总线电压"
      ],
      "ParamVal": [
        65
      ],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 23,
      "ResultErrCode": [
        255
      ],
      "RetryCount": 1
    },
    {
      "TaskID": 13,
      "TaskBrief": "延时等待",
      "TaskIndex": 10,
      "ParamCount": 1,
      "ParamInfo": [
        "延时时间"
      ],
      "ParamVal": [
        30
      ],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 254,
      "ResultErrCode": [
        255
      ],
      "RetryCount": 1
    },
    {
      "TaskID": 12,
      "TaskBrief": "充电电压检测",
      "TaskIndex": 11,
      "ParamCount": 2,
      "ParamInfo": [
        "起始DAC",
        "结束DAC"
      ],
      "ParamVal": [
        31,
        28
      ],
      "TestStandard": [
        {
          "Max": 31,
          "Min": 28
        }
      ],
      "ReturnCount": 1,
      "ReturnInfo": [
        "扫描通过的DAC"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 30,
      "ResultErrCode": [
        30
      ],
      "RetryCount": 1
    },
    {
      "TaskID": 18,
      "TaskBrief": "复位放电",
      "TaskIndex": 12,
      "ParamCount": 0,
      "ParamInfo": [],
      "ParamVal": [],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 45,
      "ResultErrCode": [],
      "RetryCount": 2
    },
    {
      "TaskID": 13,
      "TaskBrief": "延时等待",
      "TaskIndex": 13,
      "ParamCount": 1,
      "ParamInfo": [
        "延时时间"
      ],
      "ParamVal": [
        80
      ],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 254,
      "ResultErrCode": [
        255
      ],
      "RetryCount": 1
    },
    {
      "TaskID": 4,
      "TaskBrief": "扫描UID",
      "TaskIndex": 14,
      "ParamCount": 2,
      "ParamInfo": [
        "使1/失0反码采集",
        "使0/失1UID全0验证"
      ],
      "ParamVal": [
        0,
        0
      ],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 24,
      "ResultErrCode": [
        255,
        255,
        255,
        255,
        255,
        255,
        255,
        255
      ],
      "RetryCount": 1
    },
    {
      "TaskID": 11,
      "TaskBrief": "充能统计",
      "TaskIndex": 15,
      "ParamCount": 4,
      "ParamInfo": [
        "电流判线AD",
        "充电结束值0.1uA",
        "充电超时0.1S",
        "电流监控0.1S"
      ],
      "ParamVal": [
        800,
        400,
        40,
        0
      ],
      "TestStandard": [
        {
          "Max": 4500,
          "Min": 2500
        },
        {
          "Max": 450,
          "Min": 120
        }
      ],
      "ReturnCount": 2,
      "ReturnInfo": [
        "充能值0.1ms",
        "充末电流0.1uA"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 34,
      "ResultErrCode": [
        34,
        35,
        255,
        255
      ],
      "RetryCount": 1
    },
    {
      "TaskID": 5,
      "TaskBrief": "密码验证",
      "TaskIndex": 16,
      "ParamCount": 1,
      "ParamInfo": [
        "0码/1原码验证"
      ],
      "ParamVal": [
        0
      ],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 29,
      "ResultErrCode": [],
      "RetryCount": 1
    },
    {
      "TaskID": 7,
      "TaskBrief": "OTP检测",
      "TaskIndex": 17,
      "ParamCount": 3,
      "ParamInfo": [
        "1关/0检UID密码为0",
        "1关/0检延时保留区为0",
        "1关/0检用户区为0"
      ],
      "ParamVal": [
        0,
        0,
        0
      ],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 25,
      "ResultErrCode": [],
      "RetryCount": 1
    },
    {
      "TaskID": 14,
      "TaskBrief": "写延时",
      "TaskIndex": 18,
      "ParamCount": 1,
      "ParamInfo": [
        "延时"
      ],
      "ParamVal": [
        20
      ],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 36,
      "ResultErrCode": [],
      "RetryCount": 1
    },
    {
      "TaskID": 15,
      "TaskBrief": "读延时",
      "TaskIndex": 19,
      "ParamCount": 0,
      "ParamInfo": [],
      "ParamVal": [],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 37,
      "ResultErrCode": [
        255
      ],
      "RetryCount": 1
    },
    {
      "TaskID": 16,
      "TaskBrief": "时钟校准",
      "TaskIndex": 20,
      "ParamCount": 2,
      "ParamInfo": [
        "脉冲周期",
        "脉冲个数"
      ],
      "ParamVal": [
        1000,
        25
      ],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 39,
      "ResultErrCode": [],
      "RetryCount": 1
    },
    {
      "TaskID": 12,
      "TaskBrief": "充电电压检测",
      "TaskIndex": 21,
      "ParamCount": 2,
      "ParamInfo": [
        "起始DAC",
        "结束DAC"
      ],
      "ParamVal": [
        3,
        0
      ],
      "TestStandard": [
        {
          "Max": 3,
          "Min": 0
        }
      ],
      "ReturnCount": 1,
      "ReturnInfo": [
        "扫描通过的DAC"
      ],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 30,
      "ResultErrCode": [
        34
      ],
      "RetryCount": 1
    },
    {
      "TaskID": 19,
      "TaskBrief": "起爆使能",
      "TaskIndex": 22,
      "ParamCount": 0,
      "ParamInfo": [],
      "ParamVal": [],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 254,
      "ResultErrCode": [],
      "RetryCount": 1
    },
    {
      "TaskID": 9,
      "TaskBrief": "读芯片状态",
      "TaskIndex": 23,
      "ParamCount": 1,
      "ParamInfo": [
        "状态值掩码"
      ],
      "ParamVal": [
        254
      ],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 42,
      "ResultErrCode": [],
      "RetryCount": 10
    },
    {
      "TaskID": 20,
      "TaskBrief": "起爆充能",
      "TaskIndex": 24,
      "ParamCount": 2,
      "ParamInfo": [
        "电流判线AD",
        "起爆脉冲个数"
      ],
      "ParamVal": [
        1000,
        400
      ],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 41,
      "ResultErrCode": [
        255,
        255,
        255
      ],
      "RetryCount": 1
    },
    {
      "TaskID": 18,
      "TaskBrief": "复位放电",
      "TaskIndex": 25,
      "ParamCount": 0,
      "ParamInfo": [],
      "ParamVal": [],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 45,
      "ResultErrCode": [],
      "RetryCount": 2
    },
    {
      "TaskID": 26,
      "TaskBrief": "关总线",
      "TaskIndex": 26,
      "ParamCount": 0,
      "ParamInfo": [],
      "ParamVal": [],
      "TestStandard": [],
      "ReturnCount": 0,
      "ReturnInfo": [],
      "ErrJumpTo": 255,
      "ExecuteErrCode": 254,
      "ResultErrCode": [],
      "RetryCount": 1
    }
  ]
}