kunlun/app/iot_dlt645_app/common/app_config.h

/****************************************************************************

Copyright(c) 2019 by Aerospace C.Power (Chongqing) Microelectronics. ALL RIGHTS RESERVED.

This Information is proprietary to Aerospace C.Power (Chongqing) Microelectronics and MAY NOT
be copied by any method or incorporated into another program without
the express written consent of Aerospace C.Power. This Information or any portion
thereof remains the property of Aerospace C.Power. The Information contained herein
is believed to be accurate and Aerospace C.Power assumes no responsibility or
liability for its use in any way and conveys no license or title under
any patent or copyright and makes no representation or warranty that this
Information is free from patent or copyright infringement.

****************************************************************************/

#ifndef _APP_CONFIG_H_
#define _APP_CONFIG_H_

#include "app_flash.h"
#include "app_types.h"

#ifdef __cplusplus
extern "C" {
#endif

#define APP_GRP_MAC_ADDR         "\xff\xff\xff\x00\x00\x00"

#define APP_DEFAULT_BAUND_RATE   (115200)
#define APP_DEFAULT_DATA_BITS    (8)
#define APP_DEFAULT_STOP_BITS    (1)
#define APP_DEFAULT_PARITY       (2)
#define APP_DEFAULT_THDVALUE     (IOT_UART_DEFAULT_THDVALUE)
#define APP_MAX_THDVALUE         (IOT_UART_MAX_THDVALUE)
#define APP_DEFAULT_JOIN_NOTIFY  (1)
#define APP_DEFAULT_FREQ_BAND    PLC_LIB_FREQ_BAND_1

typedef enum {
    APP_HW_IPL_YY01         = 0x640B0100,   /* 100.11.1.0, yonglin */
    APP_HW_Q111N_ISC        = 0x65140100,   /* 101.20.1.0 */
    APP_HW_Q111N_ISF        = 0x660A0100,   /* 102.10.1.0 */
    APP_HW_Q111N_H          = 0x670A0100,   /* 103.10.1.0 */
    APP_HW_Q111N_HS         = 0x680A0100,   /* 104.10.1.0 */
    APP_HW_Q111N_ISG        = 0x690A0100,   /* 105.10.1.0 */
    APP_HW_LEDC_P           = 0x6A0A0100,   /* 106.10.1.0, ledc with psram */
    APP_HW_LEDC             = 0x6A0A0108,   /* 106.10.1.8, ledc without psram */
    APP_HW_HTZD_STA_1_PHASE = 0x290A0909,   /* 41.10.09.09 */
    APP_HW_HTZD_CCO_3_PHASE = 0x330A0100,   /* 51.10.01.00 */
    APP_HW_PV_STA_RSD_EI11_V1_0 = 0x610A0100,   /* 97.10.01.00 */
    APP_HW_PV_STA_RSD_EI12_V1_0 = 0x600A0100,   /* 96.10.01.00 */
    APP_HW_PV_STA_MPPT_V1_0 = 0x63140100,   /* 99.20.01.00 */
    APP_HW_UNKNOW
} app_hw_ver_e;

typedef struct {
    nv_ftm_factory_id factory;
} app_config;

/**
 * @brief app_get_hw_ver() - get hardware version.
 *
 * @param None.
 *
 * @return app_hw_ver_e : hardware version;
 */
app_hw_ver_e app_get_hw_ver(void);

/**
 * @brief app_get_factory_from_nv() - get app factory config from custom flash.
 *
 * @param [out] param: app factory config.
 *
 * @return ERR_OK : get config done;
 * @return Others : get config failed;
 */
uint16_t app_get_factory_from_nv(nv_ftm_factory_id *param);

/**
 * @brief app_save_factory_to_nv() - save app factory config to custom flash.
 *
 * @param None.
 *
 * @return ERR_OK : save done;
 * @return Others : save failed;
 */
uint16_t app_save_factory_to_nv(void);

/**
 * @brief app_restore_factory() - set app factory config to default.
 *
 * @param None.
 *
 * @return None.
 */
void app_restore_factory(void);

/**
 * @brief app_load_nv_conf() - load config from custom flash.
 *
 * @param None.
 *
 * @return None.
 */
void app_load_nv_conf(void);

/**
 * @brief app_pib_restore_factory() - restore the pib config to factory,
 *          include uart param, sta scan band, work band, white list.
 *
 * @param None.
 *
 * @return None.
 */
void app_pib_restore_factory(void);

/**
 * @brief app_pib_conf_init() - check uart config in pib. if invalid, restore
 *          the pib config to factory.
 *
 * @param None.
 *
 * @return None.
 */
void app_pib_conf_init(void);

#ifdef __cplusplus
}
#endif

#endif  /* _APP_CONFIG_H_ */