kunlun/dtest/bee_iso7816_test/bee_iso7816_test.c

#include "os_types.h"
#include "os_task.h"
#include "os_mem.h"

#include "dbg_io.h"
#include "iot_diag.h"
#include "iot_io.h"



//#include <stdlib.h>
#include "iot_system_api.h"
#include "iot_config.h"




//#include "iot_gptmr.h"
#include "iot_system.h"
//#include "os_mem.h"
//#include "cpu.h"
//#include "os_task.h"

#include "platform.h"
#include "encoding.h"

//#include "sec_glb.h"
//#include "ahb.h"
//#include "intc.h"

#include "bits.h"

#include "iso7816_sim_rf.h"
#include "apb_glb0_reg.h"
#include "hw_reg_api.h"

#include "os_utils.h"
#include "iso7816.h"

#include "gpio_mtx.h"

//#define RF0 0
#define RF 1


static int32_t iot__platform_init()
{
    /*platform intialization*/
    platform_init();

    //resource initializations;
//    system_clock_init();

//    system_uart_init();

    dbg_uart_init();

   // dbg_uart_stage1_init();

  //  iot_led_init();

    return 0;
}

#define  GMTX_SIM0_DATA_in      57
#define  GMTX_SIM1_DATA_in      58
#define  GMTX_SIM1_DATA_out     90
#define  GMTX_SIM1_CLK_out      91
#define  GMTX_SIM1_RST_out      92
#define  GMTX_SIM0_DATA_out     87
#define  GMTX_SIM0_CLK_out      88
#define  GMTX_SIM0_RST_out      89

uint8_t sim_gpio_sel(uint8_t port, uint8_t data, uint8_t clk, uint8_t rst)
{
    if(SIM_INVALID(port))
        return 1;

    gpio_mtx_enable();
    uint8_t data_func = 0;
    uint8_t clk_func = 0;
    uint8_t rst_func = 0;
    gpio_sig_info_t info = {0};

    data_func = gpio_pin_func_get(data);
    clk_func = gpio_pin_func_get(clk);
    rst_func = gpio_pin_func_get(rst);

    info.CFG[0].type = IO_TYPE_IO;
    info.CFG[0].func = data_func;
    info.CFG[0].gpio = data;
    info.CFG[1].type = IO_TYPE_OUT;
    info.CFG[1].func = clk_func;
    info.CFG[1].gpio = clk;
    info.CFG[2].type = IO_TYPE_OUT;
    info.CFG[2].func = rst_func;
    info.CFG[2].gpio = rst;

    if (port == 0) {
        info.sig_type = 3;
        info.CFG[0].inid = GMTX_SIM0_DATA_in;
        info.CFG[0].outid = GMTX_SIM0_DATA_out;
        info.CFG[1].inid = 0xff;
        info.CFG[1].outid = GMTX_SIM0_CLK_out;
        info.CFG[2].inid = 0xff;
        info.CFG[2].outid = GMTX_SIM0_RST_out;
    } else if (port == 1){
        info.sig_type = 3;
        info.CFG[0].inid = GMTX_SIM1_DATA_in;
        info.CFG[0].outid = GMTX_SIM1_DATA_out;
        info.CFG[1].inid = 0xff;
        info.CFG[1].outid = GMTX_SIM1_CLK_out;
        info.CFG[2].inid = 0xff;
        info.CFG[2].outid = GMTX_SIM1_RST_out;
    }

    gpio_module_pin_select(&info);
    gpio_module_sig_select(&info, GPIO_MTX_MODE_MATRIX);
    return 0;
}

void user_task_1()
{
    uint32_t value=0;
    uint8_t i =0;

    sim_gpio_sel(1, 3, 4, 5);

    //tmode0 tx test
//    iso7816_controller_reset(RF);
//    iso7816_tmode_init(RF);
//    iso7816_tmode_set_mode0(RF);
//    iso7816_cold_reset(RF);
//    iso7816_set_tx_mode(RF);

//    iso7816_tx(RF1,0x68660055);
//    iso7816_tx(RF1,0x686600aa);

//    os_delay(400);


    //tmode1 tx test
//    iso7816_controller_reset(RF);
//    iso7816_tmode_init(RF);

//    iso7816_tmode_set_mode1(RF);
//    iso7816_cold_reset(RF);
//    iso7816_set_tx_mode(RF);

//    iso7816_tx(RF1,0x68660055);
//    iso7816_tx(RF1,0x686600aa);

//    os_delay(400);

    //tmode0 atr test
    iso7816_controller_reset(RF);
    iso7816_tmode_init(RF);
    iso7816_cold_reset(RF);

     iso7816_set_rx_mode(RF);
    if(0==iso7816_rx_fifo_empty_check(RF)){
        i =0;
        while(0==iso7816_rx_fifo_empty_check(RF)){
            value = iso7816_rx(RF);
            iot_printf("recieve data %d = %x \n",i,value);
            i++;
        }
    }


    //tmode1 9bit tx and rx test
    iso7816_rx_fifo_clear(RF);
    os_delay(400);

    iso7816_tmode_set_mode1(RF);
    iso7816_set_tx_mode(RF);
    iso7816_tx(RF,0x68660000);
    iso7816_tx(RF,0x686600A4);
    iso7816_tx(RF,0x68660004);
    iso7816_tx(RF,0x68660000);
    iso7816_tx(RF,0x6866000E);

    iso7816_wait_for_tx_done(RF);
    iso7816_set_rx_mode(RF);

    os_delay(400);

    if(0==iso7816_rx_fifo_empty_check(RF)){
        value = iso7816_rx(RF);
        iot_printf("data received data = %x!\n",value);
    }
    else{
        iot_printf("no data received\n");
    }

    //de-active test
    iso7816_rx_fifo_clear(RF);
    os_delay(400);

    iso7816_card_release(RF);
    os_delay(400);
    iso7816_cold_reset(RF);
    //iso7816_warm_reset(RF);
    if(0==iso7816_rx_fifo_empty_check(RF)){
        iot_printf("iso7816 rf%d card release successfully !\n",RF);
        iso7816_set_rx_mode(RF);

        i =0;
        while(0==iso7816_rx_fifo_empty_check(RF)){
            value = iso7816_rx(RF);
            iot_printf("recieve data %d = %x \n",i,value);
            i++;
        }
    }
    else{
        iot_printf("iso7816 rf%d card release failed !\n",RF);
    }

    while(1)
    {
        iot_printf("user_task_1....\n");
        os_delay(400);
    }
}

int32_t iot__task_init()
{
    os_task_h handle;

    handle = os_create_task(user_task_1, NULL, 9);

    //create the tasks;
    if(handle != NULL) {
        iot_printf("task 1 init successfully...\n");
    }

    return 0;
}


int32_t iot__module_init(void)
{
    //platform intialization;
    iot__platform_init();

    //create all the tasks;
    iot__task_init();

    iot_printf("starting...\n");

    return 0;
}

int32_t iot__task_start()
{
    //start the tasks;
    os_start_kernel();

    return 0;
}

int32_t iot__module_start(void)
{
    int32_t res = 0;

    res = iot__task_start();

    return res;
}


int main(void)
{
    //module init;
    iot__module_init();

    //module start;
    iot__module_start();

    return 0;
}