andy/kunlun
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
f4855a288121c1cbc9a96ad0fe6cbf6e2eb82971
kunlun/inc/config/plc_config.h

1489 lines
46 KiB
C
Raw Normal View History

初始提交
2024-09-28 14:24:04 +08:00
/****************************************************************************
Copyright(c) 2019 by Aerospace C.Power (Chongqing) Microelectronics. ALL RIGHTS RESERVED.
This Information is proprietary to Aerospace C.Power (Chongqing) Microelectronics and MAY NOT
be copied by any method or incorporated into another program without
the express written consent of Aerospace C.Power. This Information or any portion
thereof remains the property of Aerospace C.Power. The Information contained herein
is believed to be accurate and Aerospace C.Power assumes no responsibility or
liability for its use in any way and conveys no license or title under
any patent or copyright and makes no representation or warranty that this
Information is free from patent or copyright infringement.
****************************************************************************/
/* This file contains the Kunlun features configuration
* any feature related .c file should include this file
*/
#ifndef PLC_CONFIG_H
#define PLC_CONFIG_H
#ifdef __cplusplus
extern "C" {
#endif
/* HW configuration start *****************************************************/
#define MAC_RX_FILTER_DISABLE_BITMAP 7 //0b0111
/* both GREEN_PHY & AV protocol use this macro */
#define SUPPORT_GREEN_PHY 0
/* ieee1901 protocol */
#ifndef SUPPORT_IEEE_1901
#define SUPPORT_IEEE_1901 0
#endif
#if (!SUPPORT_SMART_GRID && SUPPORT_IEEE_1901)
#error "define support protocol SG or IEEE1901 error"
#endif
/* HW configuration end *******************************************************/
/* RF configuration start *****************************************************/
/* hplc+rf dual mode support */
#ifndef HPLC_RF_SUPPORT
#define HPLC_RF_SUPPORT 0
#endif
/* rf channel support */
#ifndef HPLC_RF_CHANNEL_SUPPORT
#define HPLC_RF_CHANNEL_SUPPORT (HPLC_RF_SUPPORT && 1)
#endif
/* rf device support
* NOTE: current, just only simulator are supported.
*/
#ifndef HPLC_RF_DEV_SUPPORT
#define HPLC_RF_DEV_SUPPORT (((TARGET_VERSION == TARGET_KUNLUN3) \
|| (HW_PLATFORM == HW_PLATFORM_SIMU)) \
&& HPLC_RF_SUPPORT)
#endif
/* wmac enable */
#ifndef HPLC_RF_WMAC_ENABLE
#define HPLC_RF_WMAC_ENABLE (HPLC_RF_DEV_SUPPORT && 1)
#endif
#ifndef HPLC_RF_MPDU_SINGLE_PB
#define HPLC_RF_MPDU_SINGLE_PB 1
#endif
/* define if dual mode device support broadcast packets sent on hplc+rf dual
* link when the broadcast link type of cvg or app layer is not explicitly
* specified. if the broadcast link type is explicitly specified, will only sent
* on the specified link. if set, a copy of the broadcast packet will be sent to
* the rf link, in addition to sending the broadcast packet on the hplc.
*/
#define HPLC_RF_DUAL_BCAST (HPLC_RF_DEV_SUPPORT)
/* define if support rf single hop frame protocol */
#define HPLC_RF_SIG_HOP_SUPPORT (HPLC_RF_DEV_SUPPORT && 0)
/* if set, STA will support roaming to different links of same proxy */
#define HPLC_RF_ROAM_SAME_PCO (HPLC_RF_DEV_SUPPORT)
/* if set, CCO will support assigning rf standard discover beacon */
#define HPLC_RF_STD_DIS_BC 0
/* WAR for kl3 rx fc tei error */
#define HPLC_RF_FC_TEI_ERR_WAR (HPLC_RF_DEV_SUPPORT)
/* if set, CCO will support adjust pco slot utilization */
#define HPLC_RF_SLOT_UTILIZE_SUPPORT (HPLC_RF_SUPPORT && 0)
/* enable/disable rf tx power temperature compensation function */
#define HPLC_RF_TX_POWER_TEMP_COMPEN_EN_DEFAULT 0
/* off bbcpu calculate snr rssi */
#define HPLC_BBCPU_CALC_SNR_RSSI 0
/* this macro indicates whether the chip supports automatic rx dc calibration.
* NOTE: this function is supported only on rf v2 and later.
*/
#define HPLC_RF_SUPPORT_AUTO_CALIBR_RX_DC 0
/* this macro indicates whether the chip supports automatic tx dc calibration.
* NOTE: this function is supported only on rf v2 and later.
*/
#define HPLC_RF_SUPPORT_AUTO_CALIBR_TX_DC 0
/* Define RF rx filter bandpass mode enable control macro */
#define HPLC_RF_RX_BPF_EN 0
/* WAR for tx over 520pb on rf link. rf link support max 520pb, if exceeded,
* force broadcast to hplc link.
*/
#define HPLC_RF_TX_RF_520PB_WAR 1
/* force link type */
#define HPLC_RF_FORCE_LINK_NONE 0
#define HPLC_RF_FORCE_LINK_HPLC 1
#define HPLC_RF_FORCE_LINK_RF 2
/* define if force link support, see HPLC_RF_FORCE_LINK_XXX */
#define HPLC_RF_SUPPORT_FORCE_LINK (HPLC_RF_FORCE_LINK_NONE)
/* define if discovery beacon send with non cco node info */
#define HPLC_SUPPORT_BC_D_WITH_NON (0)
/* RF configuration end *******************************************************/
/* CERTIFICATION mode configuration start *************************************/
#ifndef CPLC_IOT_CERT_SUPPORT
/* TODO: make cert support NW also */
#define CPLC_IOT_CERT_SUPPORT 1
#endif
#ifndef CPLC_IOT_CERT_ENABLE
#define CPLC_IOT_CERT_ENABLE 0
#endif
/* rise the tx power when mac addr match */
#define CERT_WAR_TX_PWR CPLC_IOT_CERT_ENABLE
#define MAC_CERT_SEC_SUPPORT (CPLC_IOT_CERT_SUPPORT \
&& HPLC_RF_DEV_SUPPORT && (HW_PLATFORM != HW_PLATFORM_SIMU))
/* define rf certification test */
#define CRF_IOT_CERT_SUPPORT (CPLC_IOT_CERT_SUPPORT \
&& HPLC_RF_DEV_SUPPORT && (HW_PLATFORM != HW_PLATFORM_SIMU))
/* reduce tx power on kl3 for cert test */
#define CERT_HPLC_WAR_TX_POWER_REDUCE (TARGET_VERSION == TARGET_KUNLUN3)
/* war for kl1 spike cert test on mengdong */
#define HPLC_CERT_WAR_SPIKE (TARGET_VERSION == TARGET_KUNLUN)
/* CERTIFICATION mode configuration end ***************************************/
/* PLC configuration start ****************************************************/
#if (BUILD_AMP_TYPE != IOT_BUILD_AMP_CUSTOM)
#define PLC_COMM_ENABLE 1
#endif
/* define sniffer type */
#define MAC_SNIFFER_TYPE_OFF (0)
/* sniffer data io port is eth */
#define MAC_SNIFFER_TYPE_MPDU (1)
/* sniffer data io port is eth */
#define MAC_SNIFFER_TYPE_MSDU (2)
/* sniffer data io port is uart */
#define MAC_SNIFFER_TYPE_MSDU_UART (3)
/* mac mm sniffer use eth */
#ifndef MAC_MM_SNIFFER_MODE
#define MAC_MM_SNIFFER_MODE (0)
#endif
#ifndef MAC_MM_SNIFFER_ENC_ENABLE
#define MAC_MM_SNIFFER_ENC_ENABLE 0
#endif
/* define plc mm sniffer mode */
#ifndef PLC_MM_SNIFFER_MODE
#define PLC_MM_SNIFFER_MODE MAC_MM_SNIFFER_MODE
#endif
/* define band filter select */
#if (IOT_SMART_CONFIG)
#define PLC_SUPPORT_BAND_FILTER_SELECT 1
#else
#define PLC_SUPPORT_BAND_FILTER_SELECT 1
#endif
/* normal device(cco/sta) supports debug mode select.
* debug mode: a special module, can send special data by boardcast
* without joined any network. when the normal device(sta) received the
* boardcast packet, if the mac address in the broadcast payload matches its
* own address, the normal device(sta) must send the ack data to the special
* module through boardcast packet.
*/
#ifndef PLC_SUPPORT_DBG_PKT_MODE
#define PLC_SUPPORT_DBG_PKT_MODE 1
#endif
/* if set, white list and black list feature are supported */
#define PLC_SUPPORT_WHITE_BLACK_LIST 1
/* security authentication type
* 1. certificate authority of smart grid
* 2. device access key of ieee1901
*/
#define PLC_AUTH_TYPE_NONE (0)
#define PLC_AUTH_TYPE_CA (1)
#define PLC_AUTH_TYPE_DAK (2)
/* security authentication support, see PLC_AUTH_TYPE_XXX */
#define PLC_SUPPORT_AUTH_TYPE (PLC_AUTH_TYPE_NONE)
/* if set, digital signature information cache is supported */
#define PLC_SUPPORT_SIGN_CACHE \
((PLC_SUPPORT_AUTH_TYPE == PLC_AUTH_TYPE_CA) && PLC_SUPPORT_CCO_ROLE)
#if (PLC_SUPPORT_CCO_ROLE)
/* if set, cco role device will work on 3 phases, otherwise, cco role device
* will work on phase A only.
*/
#ifndef PLC_SUPPORT_3_PHASE
#define PLC_SUPPORT_3_PHASE 1
#endif
/* if set, cco will lock level 1 device logical phase based on white list.
* level 1 device cannot change local phase dynamically when cco has already
* locked sta phase.
*/
#define PLC_SUPPORT_LOCK_STA_PHASE (IOT_SMART_CONFIG && \
PLC_SUPPORT_3_PHASE)
/* support 3phse cal nf */
#ifndef PLC_SUPPORT_3PHASE_NF
#define PLC_SUPPORT_3PHASE_NF (!IOT_DTEST_ONLY_SUPPORT && \
(HW_PLATFORM != HW_PLATFORM_SIMU) && \
(TARGET_VERSION == TARGET_KUNLUN) && \
PLC_SUPPORT_3_PHASE && 1)
#endif
/* if set, cco role device will allow level 1 device to change the phase
* dynamically by detecting phase info in the beacon and discovery node list
* mme. sta role device may announce local phase info changed dynamically
* through beacon and discovery node list mme. note that the phase here is
* logical phase.
*/
#define PLC_SUPPORT_DYNAMIC_PHASE_CHG 1
#define PLC_SUPPORT_BAND_SCAN 0
/* support option/channel scan */
#define RF_SUPPORT_OPTION_CHANNEL_SCAN (0)
#define K48_STA_MULTI_CHANNEL_SELECT_ENABLE 0
/* should only for gree app (appid = 4) */
#if (IOT_APP_SELECTION == 4)
#define K48_CCO_MULTI_CHANNEL_SELECT_ENABLE 0
#else
#define K48_CCO_MULTI_CHANNEL_SELECT_ENABLE 0
#endif
#if (IOT_SMART_CONFIG)
/* define if neighbor network negotiation support */
#define PLC_SUPPORT_NEIGHBOR_NW_NEGO 0
#if RUN_IN_PSRAM
/* define if chip id support */
#define PLC_SUPPORT_CHIP_ID 1
#else /* RUN_IN_PSRAM */
/* define if chip id support */
#define PLC_SUPPORT_CHIP_ID 0
#endif /* RUN_IN_PSRAM */
/* define if pco history support */
#define PLC_SUPPORT_PCO_HIS 0
/* define if peer state statistics support */
#define PLC_SUPPORT_PEER_STAT 0
/* if set, the ext protocol will be supported.*/
#define PLC_SUPPORT_EXT_PROTO 0
/* define if hardware tsfm detection result cache supported */
#define PLC_SUPPORT_HW_TSFM_DETECT_CACHE 0
/* define if version info is complete */
#define PLC_SUPPORT_VER_INFO_COMP 0
#else /* IOT_SMART_CONFIG */
#define PLC_SUPPORT_NEIGHBOR_NW_NEGO 1
#define PLC_SUPPORT_PCO_HIS 1
/* define if peer state statistics support */
#define PLC_SUPPORT_PEER_STAT 1
/* if set, the ext protocol will be supported.*/
#define PLC_SUPPORT_EXT_PROTO 1
/* define if hardware tsfm detection result cache supported */
#define PLC_SUPPORT_HW_TSFM_DETECT_CACHE 1
/* define if version info is complete */
#define PLC_SUPPORT_VER_INFO_COMP 1
#if (SUPPORT_IEEE_1901)
#define PLC_SUPPORT_CHIP_ID 0
#else /* SUPPORT_IEEE_1901 */
#define PLC_SUPPORT_CHIP_ID 1
#endif /* SUPPORT_IEEE_1901 */
#endif /* IOT_SMART_CONFIG */
#define PLC_SUPPORT_HW_TSFM 0
/* if set, cco will send broadcast packets in 3 physical phases
* simultaneously
*/
#define PLC_SUPPORT_CCO_TX_3_PHASE PLC_SUPPORT_3_PHASE
/* if set, sta will try to send packets in 3 phases time slot for csma
* region.
*/
#define PLC_SUPPORT_STA_TX_3_PHASE 0
#if RUN_IN_PSRAM
/* if set, plc lib will have standalone task instead of leverage CVG task
* context.
*/
#define PLC_LIB_STANDALONE_TASK 1
#else /* RUN_IN_PSRAM */
/* if set, plc lib will have standalone task instead of leverage CVG task
* context.
*/
#define PLC_LIB_STANDALONE_TASK 0
#endif /* RUN_IN_PSRAM */
/* cco device use crc16 */
#define IOT_CRC16_SUPPORT 1
/* if set, the app filter will be supported. */
#define PLC_SUPPORT_APP_FILTER 1
/* hplc and rf asynchronous tx pkt */
#define HPLC_RF_ASYNC_TX (0)
/* define dual mode device transmit config
* 0 - disable config function
* 1 - dual mode device async tx pkt
* 2 - dual mode device sync tx pkt
*/
#define PLC_SUPPORT_DM_TX_CFG (0)
#else /* PLC_SUPPORT_CCO_ROLE */
#define PLC_SUPPORT_3PHASE_NF 0
#define PLC_SUPPORT_DYNAMIC_PHASE_CHG 1
/* if set, STA device will support logical phase lock function */
#define PLC_SUPPORT_LOCK_STA_PHASE (IOT_SMART_CONFIG)
#if (IOT_SMART_CONFIG)
#define PLC_SUPPORT_HW_TSFM 0
/* if set, the app filter will be supported. */
#define PLC_SUPPORT_APP_FILTER 0
#else /* IOT_SMART_CONFIG */
/* if set, the app filter will be supported. */
#define PLC_SUPPORT_APP_FILTER 1
#if (IOT_FLASH_SIZE >= 2)
#define PLC_SUPPORT_HW_TSFM (HW_PLATFORM != HW_PLATFORM_SIMU)
#else
#define PLC_SUPPORT_HW_TSFM 0
#endif /* IOT_FLASH_SIZE >= 2 */
#endif /* IOT_SMART_CONFIG */
#define PLC_SUPPORT_BAND_SCAN (HW_PLATFORM != HW_PLATFORM_SIMU)
/* support option/channel scan */
#define RF_SUPPORT_OPTION_CHANNEL_SCAN (HPLC_RF_DEV_SUPPORT \
&& (HW_PLATFORM != HW_PLATFORM_SIMU) \
&& (IOT_MP_SUPPORT == 1) \
&& 1)
#define PLC_SUPPORT_HW_TSFM_REC PLC_SUPPORT_HW_TSFM
#define PLC_SUPPORT_HW_TSFM_REC_SYB (PLC_SUPPORT_HW_TSFM_REC \
&& TARGET_VERSION == TARGET_KUNLUN)
#define PLC_SUPPORT_HW_TOPO (PLC_SUPPORT_HW_TSFM \
&& ((TARGET_VERSION == TARGET_KUNLUN2) \
|| (TARGET_VERSION == TARGET_KUNLUN3)) \
&& (IOT_BRM_ENABLE || IOT_BSRM_MODE \
|| (IOT_FTM_SUPPORT \
&& (IOT_MP_SUPPORT == 0))))
/* hardware tsfm power amplifier */
#define PLC_SUPPORT_HW_TSFM_PA (PLC_SUPPORT_HW_TSFM \
&& !PLC_SUPPORT_CCO_ROLE)
/* power amplifier hw tsfm mode encode frequency, each tone is
* 75MHz/(1 << 14)
*/
#define PLC_HW_TSFM_ENCODE_PA_TONE_NUM_DEF (27)
#define PLC_HW_TSFM_ENCODE_PA_TONE_NUM_MAX (16380)
/* defines the center frequency of the characteristic current signal supported
* in PA mode, uint is 0.01HZ.
*/
#define PLC_HW_TOPO_DECODE_PA_FC_5950928 (5950928)
#define PLC_HW_TOPO_DECODE_PA_FC_9155273 (9155273)
#define PLC_HW_TOPO_DECODE_PA_FC_11444092 (11444092)
#define PLC_HW_TOPO_DECODE_PA_FC_12359619 (12359619)
#define PLC_HW_TOPO_DECODE_PA_FC_16479492 (16479492)
#define PLC_HW_TOPO_DECODE_PA_FC_19683838 (19683838)
/* PA mode default demodulated signal center frequency point */
#define PLC_HW_TOPO_DECODE_PA_FC_DEF PLC_HW_TOPO_DECODE_PA_FC_12359619
/* should only for gree app (appid = 4) */
#if (IOT_APP_SELECTION == 4)
#define K48_STA_MULTI_CHANNEL_SELECT_ENABLE 0
#else
#define K48_STA_MULTI_CHANNEL_SELECT_ENABLE 0
#endif
#define K48_CCO_MULTI_CHANNEL_SELECT_ENABLE 0
#define PLC_SUPPORT_NEIGHBOR_NW_NEGO 0
#define PLC_SUPPORT_CCO_TX_3_PHASE 0
#define PLC_SUPPORT_STA_TX_3_PHASE 1
#define PLC_LIB_STANDALONE_TASK 0
/* sta device use crc16 */
#define IOT_CRC16_SUPPORT 1
/* hplc and rf asynchronous tx pkt.
* NOTE: In order to enable this function HPLC_RF_DEV_SUPPORT must be equal to 1
* HPLC_RF_ASYNC_TX maybe equal to 0, 1 or 2.
* 0 indicate diable this function;
* 1 indicate pcs is configured by HPLC and BBCPU using interrupted handshake;
* 2 indicate pcs is configured by spinlock.
*/
#if HPLC_RF_DEV_SUPPORT
#define HPLC_RF_ASYNC_TX (2)
#else
#define HPLC_RF_ASYNC_TX (0)
#endif
#endif /* PLC_SUPPORT_CCO_ROLE */
#if PLC_SUPPORT_CCO_TX_3_PHASE
/* if set, cco will try to send any phase packets in 3 phases time slot
* for csma region.
*/
#define PLC_SUPPORT_CCO_TX_3_PHASE_SLOT 0
#else
#define PLC_SUPPORT_CCO_TX_3_PHASE_SLOT 0
#endif
#if (IOT_SMART_CONFIG \
|| (HW_PLATFORM == HW_PLATFORM_FPGA))
/* if set, non standard APP data like CLI will be encapsulated into diagnose
* MME to make sure the data can be forwarded by other vendor devices.
* FPGA use non standard ping, so need disable this
*/
#define PLC_ENCAP_NON_STD_APP_DATA 0
#else
#define PLC_ENCAP_NON_STD_APP_DATA 1
#endif
/* if set, tx traffic success ratio calculation is supported. this will
* enlarge the discovery node list mme packet size and is not suitable for
* low bandwidth case.
*/
#define PLC_SUPPORT_TX_SR_CALC 1
/* if set, support add threshold data to beacon vendor entry */
#define PLC_SUPPORT_BC_VENDOR_TH_DATA 0
/* if set, sw cfg sof frame len */
#define MAC_SW_FRAME_LEN 1
/* if set, tei for a remote peer could be locked even the peer has left
* the network for a while if the peer is using PLC_MAC_ADDR_TYPE_METER
* mac address.
*/
#define PLC_SUPPORT_TEI_LOCK 1
/* if set, the locked tei could be recycled even if the locked peer has not
* timeout
*/
#define PLC_SUPPORT_TEI_LOCK_RECYCLE (IOT_SMART_CONFIG && \
PLC_SUPPORT_TEI_LOCK)
/* if set, candidate route to cco will be put into discovery node list mme */
#define PLC_PUT_CAND_ROUTE_IN_DIS_MME 1
#if SUPPORT_SOUTHERN_POWER_GRID
/* if set, vendor info will be put into discovery node list mme */
#define PLC_PUT_VENDOR_INFO_IN_DIS_MME 0
/* if set, sta will record all learnt proxy info of surrounding peers */
#define PLC_SUPPORT_PROXY_LEARNING 1
/* define if support sta use smaller mme discovery list payload */
#define PLC_SUPPORT_STA_DIS_SMALL 0
#else /* SUPPORT_SOUTHERN_POWER_GRID */
#define PLC_PUT_VENDOR_INFO_IN_DIS_MME 1
#define PLC_SUPPORT_PROXY_LEARNING 0
/* define if support sta use smaller mme discovery list payload */
#define PLC_SUPPORT_STA_DIS_SMALL (PLC_SUPPORT_STA_ROLE)
#endif /* SUPPORT_SOUTHERN_POWER_GRID */
/* if set, local device will track all known peers mac address */
#define PLC_SUPPORT_ADDR_TO_TEI_MAP 1
/* if set, CCO will use the non bitmap version proxy change conf */
#define PLC_USE_PROXY_CHG_NO_BM_VER 0
/* if set, CCO will use gathered assoc ind for level 1 sta assoc request */
#define PLC_SUPPORT_GATHER_ASSOC_REQ 1
/* if set, CCO will limitper STA roaming frequency after network formation
* done.
*/
#define PLC_SUPPORT_ROAMING_LIMIT 0
/* if set, STA will support roaming between PCOs */
#define PLC_SUPPORT_PROXY_ROAMING 1
/* if set, STA will support force restart vdev if proxy chg nack feature is
* enabled.
*/
#define PLC_SUPPORT_PROXY_NACK_FORCE (0)
/* if set, STA will support dynamic route recovery process */
#define PLC_SUPPORT_ROUTE_RECOVERY 1
/* if set, STA will reboot the whole system if stuck in network search status
* for a long time.
*/
#define PLC_SUPPORT_WATCH_DOG 1
/* define if enable HW NTB sync feature */
#define PLC_ENABLE_HW_NTB_SYNC 0
#ifndef PLC_SUPPORT_EXT_PROTO
/* if set, the ext protocol will be supported.*/
#define PLC_SUPPORT_EXT_PROTO 1
#endif
/* controller proto master role support or not */
#if PLC_SUPPORT_EXT_PROTO
#if PLC_SUPPORT_STA_ROLE
#if (HW_PLATFORM == HW_PLATFORM_SIMU || IOT_FLASH_SIZE >= 2)
#define PLC_SUPPORT_CTRL_PROTO_MAS_ROLE 1
#else /* HW_PLATFORM == HW_PLATFORM_SIMU || IOT_FLASH_SIZE >= 2 */
#define PLC_SUPPORT_CTRL_PROTO_MAS_ROLE 0
#endif /* HW_PLATFORM == HW_PLATFORM_SIMU || IOT_FLASH_SIZE >= 2 */
#endif /* PLC_SUPPORT_STA_ROLE */
#endif /* PLC_SUPPORT_EXT_PROTO */
/* enable the token shared between CSMA */
/* will remove this after token management feature done */
#define USE_SHARED_CSMA_TOKEN 1
/* use per pb retry or msdu retry
* for cert test case, we have to use
* per msdu ertry
*/
#if (HW_PLATFORM >= HW_PLATFORM_FPGA)
#if SUPPORT_SOUTHERN_POWER_GRID
#define ENABLE_PER_PB_RETRY 0
#else
#define ENABLE_PER_PB_RETRY !CPLC_IOT_CERT_ENABLE
#endif
#else //HW_PLATFORM >= HW_PLATFORM_FPGA
#define ENABLE_PER_PB_RETRY 1
#endif
/*if msdu retry, set retry bit always when
* first pb sent out, this would have some
* impact to the efficiency, there's no sync
* between the tx and rx side, we'd better
* only enable it on cert test
*/
#ifndef ENA_ALWAYS_SET_RETRY_BIT
#define ENA_ALWAYS_SET_RETRY_BIT 0
#endif
/* rate control enable or not */
#if (HW_PLATFORM == HW_PLATFORM_SIMU)
#define RATE_ADAPTION_ENABLE 0
#else //HW_PLATFORM == HW_PLATFORM_SIMU
#if (SUPPORT_SOUTHERN_POWER_GRID || IOT_SMART_CONFIG)
#define RATE_ADAPTION_ENABLE 0
#elif (SUPPORT_SMART_GRID && SUPPORT_IEEE_1901)
#define RATE_ADAPTION_ENABLE 0
#else //SUPPORT_SOUTHERN_POWER_GRID or IOT_SMART_CONFIG
#define RATE_ADAPTION_ENABLE 1
#endif
#endif
/* sometimes, cco rx would have abort for phase switch
* try this to enable all 3 phase, be noted there'll
* be some side effect of collision rate
*/
#define FORCE_CCO_ON_3_PHASE 0
/* mac zero cross enable */
#ifndef MAC_ZC_ENABLE
#if IOT_SMART_GRID_ENABLE
#define MAC_ZC_ENABLE 1
#else
#define MAC_ZC_ENABLE 0
#endif
#endif
#if MAC_ZC_ENABLE
#define MAC_ZC_CAL_COMPENS_SUPPORT 0
#endif
/*mac stream timeout support*/
#ifndef MAC_STREAM_TIMEOUT_SUPPORT
#define MAC_STREAM_TIMEOUT_SUPPORT (HW_PLATFORM >= HW_PLATFORM_FPGA)
#endif
/* define if support private protocol to collect zero-cross ntb */
#define PLC_SUPPORT_PRIV_ZC_CLCT 0
/* define if support peer snr tsfm algorithm */
#define PLC_SUPPORT_TSFM_PEER_SNR 0
/* define if support fast connection network */
#define PLC_SUPPORT_FAST_CONNECT (!!IOT_SMART_CONFIG)
/* define if support automatically adjust beacon tdma slot duration */
#define PLC_SUPPORT_AUTO_SLOT_DUR (IOT_SMART_CONFIG && !HPLC_RF_SUPPORT)
/* define if support bound csma slot foward, 1 - support, 0 - no support */
#define PLC_SUPPORT_BCSMA_SLOT_FWD (0)
/* define if physical phase ident support */
#if (HW_PLATFORM == HW_PLATFORM_SIMU)
#define PLC_SUPPORT_PHY_PHASE_IDENT 0
#define PLC_SUPPORT_FB_DETECT 0
/* if set, cco discovery node list mme will be compressed */
#define PLC_SUPPORT_CCO_DIS_MME_COMPRESS 0
#define PLC_SUPPORT_NW_UPLINK_CHK 0
#else //HW_PLATFORM == HW_PLATFORM_SIMU
#if (MAC_ZC_ENABLE)
#define PLC_SUPPORT_PHY_PHASE_IDENT 1
#else /* (MAC_ZC_ENABLE) */
#define PLC_SUPPORT_PHY_PHASE_IDENT 0
#endif /* (MAC_ZC_ENABLE) */
/* define if support freq band detection */
#if SUPPORT_SOUTHERN_POWER_GRID
#define PLC_SUPPORT_FB_DETECT 1
#define PLC_SUPPORT_CCO_DIS_MME_COMPRESS 0
/* define if support uplink traffic succeed ratio check */
#define PLC_SUPPORT_NW_UPLINK_CHK 1
#else //SUPPORT_SOUTHERN_POWER_GRID
#define PLC_SUPPORT_FB_DETECT 0
#define PLC_SUPPORT_CCO_DIS_MME_COMPRESS 0
/* define if support uplink traffic succeed ratio check */
#define PLC_SUPPORT_NW_UPLINK_CHK 0
#endif
#endif
/* define if support Beijing ntb tsfm algorithm */
#define PLC_SUPPORT_BJ_NTB_TSFM 1
/* define if support ntb tsfm compare two edge */
#define PLC_SUPPORT_TSFM_CMP_2_EDGE 1
/* define if support zc ntb tsfm algorithm */
#if (IOT_FLASH_SIZE >= 2 || PLC_SUPPORT_CCO_ROLE)
#define PLC_SUPPORT_TSFM_ZC_NTB 1
#define PLC_SUPPORT_HX_LED 1
#else
#define PLC_SUPPORT_TSFM_ZC_NTB 0
#define PLC_SUPPORT_HX_LED 0
#endif
#ifndef ENA_CCO_RX_THR_PHASE_CHANGE
#if PLC_SUPPORT_CCO_ROLE
#define ENA_CCO_RX_THR_PHASE_CHANGE (TARGET_VERSION == TARGET_KUNLUN)
#else
#define ENA_CCO_RX_THR_PHASE_CHANGE 0
#endif
#endif
#ifndef ENA_RX_DIFF_NID_BCAST
#if (PLC_SUPPORT_CCO_ROLE)
#define ENA_RX_DIFF_NID_BCAST 0
#else
#define ENA_RX_DIFF_NID_BCAST 1
#endif
#endif
#if SUPPORT_SOUTHERN_POWER_GRID
/* enable multiband */
#define ENABLE_MULTIBAND (!IOT_BRM_ENABLE && !IOT_BSRM_MODE)
#else
#define ENABLE_MULTIBAND (0)
#endif
/* define if sila non header mode is enable */
#ifndef PLC_SILA_NHM_ENABLE
#define PLC_SILA_NHM_ENABLE (SUPPORT_IEEE_1901)
#endif
/* enable ppm multi node record */
#define MAC_PPM_MULTI_NODE_ENABLE (0)
/* PLC configuration end ******************************************************/
/* FTM mode configuration start ***********************************************/
/* FTM includes MP mode, and MP mode is combined
* with MM mode, so FTM_SUPPORT is always defined 1
*/
#ifndef IOT_FTM_SUPPORT
#define IOT_FTM_SUPPORT 1
#endif
/* 0: FTM mode; 1: MM mode or MP mode */
#ifndef IOT_MP_SUPPORT
#define IOT_MP_SUPPORT 1
#endif
#if (IOT_MP_SUPPORT == 0 && (HW_PLATFORM >= HW_PLATFORM_FPGA))
/* init ftm start to a default mode - tx/rx */
#define IOT_FTM_INIT_MODE_SUPPORT 0
#endif
#define IOT_PT_BOARD_NONE 0
/* kl1, hz3011 */
#define IOT_PT_BOARD_K48 1
/* kl3, hz3211 */
#define IOT_PT_BOARD_K76 2
/* production test board mp mode select */
#ifndef IOT_PT_BOARD_SELECT
#define IOT_PT_BOARD_SELECT IOT_PT_BOARD_NONE
#endif
/* FTM mode configuration end *************************************************/
/* POWER managerment configuration start **************************************/
#define PLC_SUPPORT_PM 1
#define PLC_POWER_RECOVER_NOT_RESTART 1
#if (PLC_SUPPORT_PM && !IOT_ENERGE_METER_ENABLE\
&& (HW_PLATFORM > HW_PLATFORM_FPGA)\
&& (IOT_STA_CONTROL_MODE != IOT_STA_CONTROL_TYPE_STA) \
&& (!PLC_SUPPORT_HW_TOPO))
#define STATIC_POWER_SAVE 1
/* add macro for beijing cert test.
* set 1: after receiving the correct FC,
* continue to turn on the power save function.
* set 0: after receiving the correct FC,
* turn off the power save function.
*/
#define RX_FC_ON_POWER_SAVE (STATIC_POWER_SAVE && 0)
#if TARGET_VERSION == TARGET_KUNLUN3
/* define kl3 the way of switch core freq 25M and 150M
* 0: sleep/wakeup switch, 20ms/40ms switch.
* 1: mac pm start/ mac pm stop switch
*/
#define PLC_PM_SWITCH_POLICY (1 && IOT_MP_SUPPORT)
#else
/* kl1/2 need use sleep/wakeup switch */
#define PLC_PM_SWITCH_POLICY 0
#endif
#else
#define STATIC_POWER_SAVE 0
#define RX_FC_ON_POWER_SAVE 0
#endif
#ifndef PM_USE_DSR
#define PM_USE_DSR 1
#endif
#define PHY_BIAS_ADJUST_AUTO_EN 1
#if (PLC_SUPPORT_PM && !IOT_ENERGE_METER_ENABLE\
&& (HW_PLATFORM > HW_PLATFORM_FPGA))
#define PLC_SUPPORT_POWER_COLLAPSE 1
#endif
#define POWER_MANAGEMENT_ZC_SUPPORT 1
/* POWER managerment configuration end ****************************************/
/* TASK priority configuration start ******************************************/
#if (HW_PLATFORM == HW_PLATFORM_SIMU)
#define PLC_INIT_TASK_PRIO 9
#define PLC_LIB_TASK_PRIO 7
#define PLC_CVG_TASK_PRIO 8
#define PLC_MAC_TASK_PRIO 9
#define COMMUNICATOR_RX_TASK_PRIO 7
#define COMMUNICATOR_RX_CLI_TASK_PRIO 7
#define CLI_TX_MODULE_MSG_TASK_PRIO 8
#define CLI_MAIN_TASK_PRIO 8
#define CLI_HOST_TASK_PRIO 8
#define IOT_CLI_TASK_PRIO 8
#define IOT_UART_TASK_PRIO 8
#define IOT_PIB_TASK_PRIO 7
#define IOT_SHARE_TASK_L_PRIO 6
#define IOT_SHARE_TASK_H_PRIO 9
#define WIN_RECEIVE_TASK_PRIO 7
#define SIMULATOR_HW_SCHED_TASK_PRIO 8
#define SIMULATOR_HWQ_TASK_PRIO 8
#define SIMULATOR_TX_TASK_PRIO 9
#define SIMULATOR_NEW_MPDU_TASK_PRIO 7
#define SIMULATOR_RX_TASK_PRIO 8
#define IOT_SOCKET_TASK_PRIO 7
#else /* (HW_PLATFORM == HW_PLATFORM_SIMU) */
#define IOT_INIT_TASK_PRIO 9
#define PLC_LIB_TASK_PRIO 7
#define PLC_CVG_TASK_PRIO 8
#define PLC_MAC_TASK_PRIO 9
#define COMMUNICATOR_RX_TASK_PRIO 8
#define COMMUNICATOR_RX_CLI_TASK_PRIO 7
#define CLI_TX_MODULE_MSG_TASK_PRIO 8
#define CLI_MAIN_TASK_PRIO 8
#define CLI_HOST_TASK_PRIO 8
#define IOT_CLI_TASK_PRIO 8
#if (IOT_FTM_SUPPORT == 0)
#define IOT_UART_TASK_PRIO 8
#else
#define IOT_UART_TASK_PRIO 9
#endif
#define IOT_PIB_TASK_PRIO 7
#define IOT_FTM_TASK_PRIO 9
#define IOT_SHARE_TASK_L_PRIO 6
#define IOT_SHARE_TASK_H_PRIO 9
#define IOT_SOCKET_TASK_PRIO 7
#endif
#if (PLC_SUPPORT_CCO_ROLE)
#define PLC_TASK_HIGHEST_PRIO PLC_MAC_TASK_PRIO
#else /* PLC_SUPPORT_CCO_ROLE */
#define PLC_TASK_HIGHEST_PRIO 10
#endif /* PLC_SUPPORT_CCO_ROLE */
/* TASK priority configuration end ********************************************/
/* TASK size configuration start **********************************************/
#if (PLC_SUPPORT_CCO_ROLE)
#define IOT_DEFAULT_STACK_SIZE 512
#define PLC_MAC_STACK_SIZE (HPLC_RF_DEV_SUPPORT ? (512 + 384) : 512)
#define PLC_CVG_STACK_SIZE (512 + 256 + 256)
#define PLC_STARTUP_INIT_SIZE (512 + 128)
#else /* PLC_SUPPORT_CCO_ROLE */
#if (PHY_BBAI_ALGORITHM == PHY_BBAI_SLIDE_WINDOWS)
#define IOT_DEFAULT_STACK_SIZE 512
#else
#define IOT_DEFAULT_STACK_SIZE 384
#endif
#define PLC_MAC_STACK_SIZE (HPLC_RF_DEV_SUPPORT ? (512 + 384) : 512)
#if ((PLC_NETWORK_SCALE > 1015) || HPLC_RF_DEV_SUPPORT)
#define PLC_CVG_STACK_SIZE (512 + 256 + 128)
#else
#define PLC_CVG_STACK_SIZE (512 + 64)
#endif
#define PLC_STARTUP_INIT_SIZE (512 + 128)
#endif /* PLC_SUPPORT_CCO_ROLE */
/* TASK size configuration end ************************************************/
/* WAR configuration start ****************************************************/
#if HW_PLATFORM >= HW_PLATFORM_FPGA
#if (IOT_SMART_CONFIG)
/* Enable IOT Market Low Mac Beheavior */
#define IOT_POWER_GRID_CONFIG 0
#else
/* Enable Smart Grid Spec Defined Low Mac Beheavior */
#define IOT_POWER_GRID_CONFIG 1
#endif
#ifndef AUTO_PLC_HIGH_PWR
#define AUTO_PLC_HIGH_PWR IOT_MP_SUPPORT
#endif
/* check rx per pb crc by sw */
#ifndef ENA_SW_PBCRC_CHECK
#define ENA_SW_PBCRC_CHECK 1
#endif
/* check rx fc crc by sw */
#ifndef ENA_SW_FCCRC_CHECK
#if (SUPPORT_SOUTHERN_POWER_GRID)
#define ENA_SW_FCCRC_CHECK 1
#else //SUPPORT_SOUTHERN_POWER_GRID
#define ENA_SW_FCCRC_CHECK (TARGET_VERSION == TARGET_KUNLUN3)
#endif
#endif
/* ppm ntb sync and cal */
/* kl2 sync ntb use hw auto sync */
#define PPM_NTB_CAL (TARGET_VERSION == TARGET_KUNLUN)
/* force cco's ppm */
#define FORCE_INI_PPM 0
#define DBG_RX_ABORT_REASON_4 1
/*dump hw reg*/
#define DBG_HW_DUMP 0
/* mac rid pbnum input flash */
#define MAC_RID_PBNUM_FLASH_LOG 1
/*cco check spur support */
#define CCO_CHECK_SPUR_SUPPORT ((TARGET_VERSION <= TARGET_KUNLUN3) \
&& PLC_SUPPORT_CCO_ROLE \
&& IOT_MP_SUPPORT \
&& (IOT_STA_CONTROL_MODE \
!= IOT_STA_CONTROL_TYPE_STA))
/*sta check spur support */
#define STA_CHECK_SPUR_SUPPORT ((TARGET_VERSION <= TARGET_KUNLUN3) \
&& !PLC_SUPPORT_CCO_ROLE \
&& IOT_MP_SUPPORT \
&& (IOT_STA_CONTROL_MODE \
!= IOT_STA_CONTROL_TYPE_STA))
#if (CCO_CHECK_SPUR_SUPPORT || STA_CHECK_SPUR_SUPPORT)
/* debug info for check spur */
#define MAC_CHECK_SPUR_DEBUG 0
#endif
#if PLC_SUPPORT_CCO_ROLE
/*only cco open this macro*/
#define DEBUG_CANNOT_SENDOUT_PKT (IOT_MP_SUPPORT == 1)
#else
#define DEBUG_CANNOT_SENDOUT_PKT ((IOT_MP_SUPPORT == 1) && \
(TARGET_VERSION == TARGET_KUNLUN))
#endif
#define DEBUG_PKT_OVERWRITE 0
#define DEBUG_FREE_STREAM_FAIL 1
#define DEBUG_PKT_OVERFLOW 1
#define DEBUG_HWQ_SHCED_HANG 1
//debug addr if invaild addr in isr
#define DEBUG_INVAILD_ADDR 0
//debug rx pb cnt not enough
#define DEBUG_RX_PB_CNT_NOT_ENOUGH 1
//debug stream is not enough and free timeout steam
#define DEBUG_STREAM_TIMEOUT 0
#if SUPPORT_SOUTHERN_POWER_GRID
#define DEBUG_SPG_PER_MSDU_MPDU_TX 1
#define DEBUG_SPG_PER_MSDU_MPDU_RX 0
#endif
#else /* HW_PLATFORM >= HW_PLATFORM_FPGA */
#define IOT_POWER_GRID_CONFIG 1
/* ppm ntb sync and cal */
#define PPM_NTB_CAL 0
#define FORCE_INI_PPM 0
#define AUTO_PLC_HIGH_PWR 0
/* check rx per pb crc by sw */
#ifndef ENA_SW_PBCRC_CHECK
#define ENA_SW_PBCRC_CHECK 0
#endif
/* check rx fc crc by sw */
#ifndef ENA_SW_FCCRC_CHECK
#define ENA_SW_FCCRC_CHECK 0
#endif
#define DBG_RX_ABORT_REASON_4 0
#define DBG_HW_DUMP 0
/* mac rid pbnum input flash */
#define MAC_RID_PBNUM_FLASH_LOG 0
#define DEBUG_CANNOT_SENDOUT_PKT 0
/*cco check spur support */
#define CCO_CHECK_SPUR_SUPPORT 0
#define DEBUG_FREE_STREAM_FAIL 0
#define DEBUG_PKT_OVERFLOW 0
#define DEBUG_HWQ_SHCED_HANG 0
#define DEBUG_INVAILD_ADDR 0
#define DEBUG_RX_PB_CNT_NOT_ENOUGH 0
#define DEBUG_STREAM_TIMEOUT 0
#define IOT_FTM_INIT_MODE_SUPPORT 0
#endif /* HW_PLATFORM >= HW_PLATFORM_FPGA */
/* WAR for dingxin rx 2pb mpdu on spg */
#define MAC_RX_2PB_WAR (SUPPORT_SOUTHERN_POWER_GRID && 0)
#ifndef WAR_QJWY_MUL_MPDU_ISSUE
/* war for qjwy */
#define WAR_QJWY_MUL_MPDU_ISSUE (1)
#endif
/* mac fix symbol number */
#define MAC_SYM_NUM_FIX \
(SUPPORT_SOUTHERN_POWER_GRID && ((TARGET_VERSION == TARGET_KUNLUN) || \
(TARGET_VERSION == TARGET_KUNLUN3)))
/* WAR configuration end ******************************************************/
/* DEBUG configuration start **************************************************/
#define PLC_MAC_LOG_LEVEL_INVAIL 0
#define PLC_MAC_LOG_LEVEL_1 1
#define PLC_MAC_LOG_LEVEL_2 2
#define PLC_MAC_LOG_LEVEL_3 3
#define PLC_MAC_LOG_LEVEL_4 4
#if (IOT_MP_SUPPORT == 1) && (HW_PLATFORM >= HW_PLATFORM_FPGA)
/* enable if MM mode and on FPGA */
#define PLC_MAC_RX_DEBUG_LOG PLC_MAC_LOG_LEVEL_1
#define PLC_MAC_TX_DEBUG_LOG PLC_MAC_LOG_LEVEL_1
#define PLC_MAC_RA_DEBUG_LOG PLC_MAC_LOG_LEVEL_1
#define RF_MAC_RX_DEBUG_LOG PLC_MAC_LOG_LEVEL_1
#define RF_MAC_TX_DEBUG_LOG PLC_MAC_LOG_LEVEL_1
#else
#define PLC_MAC_RX_DEBUG_LOG PLC_MAC_LOG_LEVEL_INVAIL
#define PLC_MAC_TX_DEBUG_LOG PLC_MAC_LOG_LEVEL_INVAIL
#define PLC_MAC_RA_DEBUG_LOG PLC_MAC_LOG_LEVEL_INVAIL
#define RF_MAC_RX_DEBUG_LOG PLC_MAC_LOG_LEVEL_INVAIL
#define RF_MAC_TX_DEBUG_LOG PLC_MAC_LOG_LEVEL_INVAIL
#endif
#if (1 == CPLC_IOT_CERT_SUPPORT)
#define CERT_TEST_DEBUG 0
#endif
/* use this macro to record timestamp */
#define MAC_TIMESTAMPING 0
/* check rx pkt data valid for ieee1901 */
#if (SUPPORT_SMART_GRID && SUPPORT_IEEE_1901 \
&& (HW_PLATFORM >= HW_PLATFORM_FPGA))
#define MAC_RX_CHK_VALID_I1901 1
#else
#define MAC_RX_CHK_VALID_I1901 0
#endif
/* would print some statistic */
#define PLC_MEM_ALLOC_STAT 2
#if PLC_MEM_ALLOC_STAT
#define DESC_STAT_DISPLAY_FREQ 0x3ff
#define IOTPKT_STAT_DISPLAY_FREQ 0x5ff
#endif
#define CVG_HB_DEBUG 0
#if (HW_PLATFORM == HW_PLATFORM_SIMU)
#define CVG_RT_DEBUG 1
#define CVG_ASSOC_DEBUG 0
#else
#define CVG_RT_DEBUG 2
#define CVG_ASSOC_DEBUG 1
#endif
#define CVG_NETWORK_NTB_DEBUG 0
#define CVG_BWM_DEBUG 0
#define CVG_ZC_DEBUG 0
#define MAC_SCHED_DEBUG 0
#define MAC_SCHED_HW_DEBUG 0
#if PLC_SUPPORT_NEIGHBOR_NW_NEGO && PLC_SUPPORT_CCO_ROLE
#define MAC_SCHED_NN_DEBUG 0
#else
#define MAC_SCHED_NN_DEBUG 0
#endif
#if PLC_SUPPORT_CCO_ROLE
#define MAC_SCHED_TIME_DISORDER_DEBUG 1
#else
#define MAC_SCHED_TIME_DISORDER_DEBUG 0
#endif
#define RUNTIME_DEBUG 0
#define IOT_PLC_NO_CRASH_DIALOG 0
#if HW_PLATFORM == HW_PLATFORM_SIMU
#define IOT_MEM_POOL_DOUBLE_FREE_DBG 1
#else //HW_PLATFORM == HW_PLATFORM_SIMU
#define IOT_MEM_POOL_DOUBLE_FREE_DBG 1
#endif
/* define if statistic log is enabled */
#define PLC_STATISTICS_ENABLE 0
/* CHIP bring up debug */
#if HW_PLATFORM == HW_PLATFORM_SILICON
#define CVG_PEER_DEBUG 1
#define CHIP_BRINGUP_DEBUG 1
/* beacon addr conflict debug */
#define CVG_BC_ADDR_DEBUG 0
/* debug switch for long time no beacon receiving */
#define CVG_NO_BC_RX_DEBUG 0
#else
#define CVG_PEER_DEBUG 0
#define CHIP_BRINGUP_DEBUG 0
/* beacon addr conflict debug */
#define CVG_BC_ADDR_DEBUG 0
/* debug switch for long time no beacon receiving */
#define CVG_NO_BC_RX_DEBUG 0
#endif
/* hardware transformer detection debug */
#define HW_TSFM_DEBUG 0
/* hardware topo debug */
#define HW_TOPO_DEBUG 0
/* iram isr monitor debug */
#if (IOT_FLASH_SIZE >= 2)
#define SNAPSHOT_MONITOR_DEBUG 0
#else
#define SNAPSHOT_MONITOR_DEBUG 0
#endif
#if ((TARGET_VERSION == TARGET_KUNLUN) || (TARGET_VERSION == TARGET_KUNLUN2))
#define DUAL_WDG_ON_ONE_CPU_ENABLE 1
#else
#define DUAL_WDG_ON_ONE_CPU_ENABLE 0
#endif
#define JTAG0_REMAPPING_DEBUG 0
#define FLASH_SUSPEND_ENABLE 1
#define FLASH_HIGH_FREQ_ENABLE 0
#if IOT_PT_BOARD_SELECT
#define SYSTEM_GPIO_RESET_CONTROL 0
#else
#define SYSTEM_GPIO_RESET_CONTROL 1
#endif
#define IOT_RECOVER_TIME (5*60*1000) // 5 min
#if (HW_PLATFORM == HW_PLATFORM_FPGA && FPGA_IMAGE_TYPE == FPGA_IMAGE_TYPE_BB)
#define IOT_LOG_TO_FLASH_ENABLE 0
#else //HW_PLATFORM == HW_PLATFORM_FPGA
#define IOT_LOG_TO_FLASH_ENABLE 1
#endif
/* rf schedule debug */
#define MAC_RF_SCHED_DEBUG 0
/* Enable task dump on KL3. */
#if TARGET_VERSION == TARGET_KUNLUN3
#define TASK_CRASH_DUMP_DEBUG 1
#define TASK_CRASH_DUMP_STACK_DEBUG 1
#define TASK_CRASH_DUMP_TO_FLASH 1
#endif
/* DEBUG configuration end ****************************************************/
/* SIMULATOR configuration start **********************************************/
/* plc simulator */
#define RANDOMLY_DROP_PB_SUPPORT 0
#define SACK_ENABLE 1
#define SCHED_SUPPORT 1
#define SCHED_DEBUG 0
#define CHANNEL_SIMULATOR_SUPPORT 0
#define SIMU_ACROSS_MACHINE 0
#define SIMU_TEST_MODE 0
#define DISCARD_CLI_PACKAGE 0
#define GRID_TYPE_SG 0
#define GRID_TYPE_SOUTHERN 3
#define SIMU_SUPPORT_POWER_GRID_TYPE GRID_TYPE_SG
#if HW_PLATFORM == HW_PLATFORM_SIMU
#define SIMU_DBG 0
#endif
/* rf simulator */
#define RF_SCHED_SUPPORT HPLC_RF_DEV_SUPPORT
/* SIMULATOR configuration end ************************************************/
/* BSP configuration start ****************************************************/
/* extern energy meter. if enable, the extern energy meter will be supported */
#if (HW_PLATFORM >= HW_PLATFORM_FPGA)
#ifndef IOT_ENERGY_METER_EXT_ENABLE
#if ((TARGET_VERSION == TARGET_KUNLUN2 || TARGET_VERSION == TARGET_KUNLUN3) && \
IOT_BRM_ENABLE)
#define IOT_ENERGY_METER_EXT_ENABLE 1
#else
#define IOT_ENERGY_METER_EXT_ENABLE 0
#endif
#endif
#else //HW_PLATFORM >= HW_PLATFORM_FPGA
#ifndef IOT_ENERGY_METER_EXT_ENABLE
#define IOT_ENERGY_METER_EXT_ENABLE 0
#endif
#endif
/* extern humidity and temperature sensor. if enable, the humidity and
* temperature measurement will be supported
*/
#if (HW_PLATFORM >= HW_PLATFORM_FPGA)
#ifndef IOT_HTM_EXT_ENABLE
#if ((TARGET_VERSION == TARGET_KUNLUN2) && !PLC_SUPPORT_CCO_ROLE)
#define IOT_HTM_EXT_ENABLE 1
#else
#define IOT_HTM_EXT_ENABLE 0
#endif
#endif
#else //HW_PLATFORM >= HW_PLATFORM_FPGA
#ifndef IOT_HTM_EXT_ENABLE
#define IOT_HTM_EXT_ENABLE 0
#endif
#ifndef IOT_HTM_EXT_CHT8310_ENABLE
#define IOT_HTM_EXT_CHT8310_ENABLE 0
#endif
#endif
/* extern gsm device. if enable, the gsm device will be supported
*/
#if (HW_PLATFORM >= HW_PLATFORM_FPGA)
#ifndef IOT_GSM_EXT_ENABLE
#if ((TARGET_VERSION == TARGET_KUNLUN2) && !PLC_SUPPORT_CCO_ROLE)
#define IOT_GSM_EXT_ENABLE 1
#else
#define IOT_GSM_EXT_ENABLE 0
#endif
#endif
#else //HW_PLATFORM >= HW_PLATFORM_FPGA
#ifndef IOT_GSM_EXT_ENABLE
#define IOT_GSM_EXT_ENABLE 0
#endif
#endif
/* extern Real-Time Clock sensor. if enable, the Real-Time Clock
* measurement will be supported
*/
#if (HW_PLATFORM >= HW_PLATFORM_FPGA)
#ifndef IOT_RTC_EXT_ENABLE
#if ((TARGET_VERSION == TARGET_KUNLUN2 || TARGET_VERSION == TARGET_KUNLUN3) && \
IOT_BRM_ENABLE)
#define IOT_RTC_EXT_ENABLE 1
#else
#define IOT_RTC_EXT_ENABLE 0
#endif
#endif
#else //HW_PLATFORM >= HW_PLATFORM_FPGA
#ifndef IOT_RTC_EXT_ENABLE
#define IOT_RTC_EXT_ENABLE 1
#endif
#endif
/* extern bluetooth. if enable, the extern bluetooth will be supported */
#if (HW_PLATFORM >= HW_PLATFORM_FPGA)
#ifndef IOT_BT_EXT_ENABLE
#if ((TARGET_VERSION == TARGET_KUNLUN2 || TARGET_VERSION == TARGET_KUNLUN3) && \
IOT_BRM_ENABLE)
#define IOT_BT_EXT_ENABLE 1
#else
#define IOT_BT_EXT_ENABLE 0
#endif
#endif
#else //HW_PLATFORM >= HW_PLATFORM_FPGA
#ifndef IOT_BT_EXT_ENABLE
#define IOT_BT_EXT_ENABLE 0
#endif
#endif
#if (HW_PLATFORM >= HW_PLATFORM_FPGA)
#ifndef IOT_FLASH_DCDC_TRIM_ENABLE
#define IOT_FLASH_DCDC_TRIM_ENABLE 0
#endif
#else
#ifndef IOT_FLASH_DCDC_TRIM_ENABLE
#define IOT_FLASH_DCDC_TRIM_ENABLE 0
#endif
#endif
/* ext flash enable */
#if (HW_PLATFORM >= HW_PLATFORM_FPGA)
#ifndef IOT_EXT_FLASH_ENABLE
#if ((TARGET_VERSION != TARGET_KUNLUN2) && !PLC_SUPPORT_CCO_ROLE)
#define IOT_EXT_FLASH_ENABLE (1)
#else
#define IOT_EXT_FLASH_ENABLE (0)
#endif
#endif
#else //HW_PLATFORM >= HW_PLATFORM_FPGA
#ifndef IOT_EXT_FLASH_ENABLE
#define IOT_EXT_FLASH_ENABLE (0)
#endif
#endif
/* If DMA uart supported. */
#if (PLC_SUPPORT_CCO_ROLE || IOT_STA_CONTROL_MODE == 1 ) \
&& (HW_PLATFORM == HW_PLATFORM_SILICON || HW_PLATFORM == HW_PLATFORM_FPGA)
#define IOT_UART_DMA_SUPPORT 1
#else
#define IOT_UART_DMA_SUPPORT 0
#endif
/* TODO: move to hw_config.h later */
#if ((MAC_MM_SNIFFER_MODE == MAC_SNIFFER_TYPE_MPDU) || \
(MAC_MM_SNIFFER_MODE == MAC_SNIFFER_TYPE_MSDU))
/* enable emac driver */
#define IOT_ETH_ENABLE (1)
#endif
/* iot dbg msg enable */
#define IOT_DBG_MSG_ENABLE (HPLC_RF_DEV_SUPPORT && \
(HW_PLATFORM != HW_PLATFORM_SIMU))
/* mbedtls lib enable/disable */
#define MBEDTLS_LIB_EN (TARGET_VERSION == TARGET_KUNLUN3 \
&& HW_PLATFORM == HW_PLATFORM_SILICON)
#define IOT_LEDC_SOFT_MODE (TARGET_VERSION == TARGET_KUNLUN \
|| TARGET_VERSION == TARGET_KUNLUN2 \
|| TARGET_VERSION == TARGET_KUNLUN3)
#ifndef IOT_UART_HW_FLOW_CTL_ENABLE
#define IOT_UART_HW_FLOW_CTL_ENABLE IOT_IPC_SUPPORT_AMP
#endif
#ifndef RTC_HW_ENABLE
/* rtc hw error is greater than software error, so software is used for rtc */
#define RTC_HW_ENABLE 0
#endif
#define IOT_CRYPTO_ASYNC_SUPPORT (MBEDTLS_LIB_EN \
&& (TARGET_VERSION == TARGET_KUNLUN3))
#define IOT_CRYPTO_MUTEX_PER_MODULE (TARGET_VERSION == TARGET_KUNLUN3)
#ifndef IOT_SEC_CPU_SUPPORT
#define IOT_SEC_CPU_SUPPORT 0
#endif
#ifndef IOT_SPI_SUPPORT_DMA
#define IOT_SPI_SUPPORT_DMA 0
#endif
/* function switch of breakpoint resume upgrade */
#define IOT_UPGRADE_SUPPORT_BREAKPOINT_RESUME (0)
/* BSP configuration end ******************************************************/
/* CLI configuration start ****************************************************/
#ifndef IOT_CLI_MODULE_ENABLE
#if IOT_HTBUS_EN
#define IOT_CLI_MODULE_ENABLE 0
#else /* IOT_HTBUS_EN */
#define IOT_CLI_MODULE_ENABLE 1
#endif /* IOT_HTBUS_EN */
#endif /* IOT_CLI_MODULE_ENABLE */
/* enable cli upgrade */
#if (HW_PLATFORM >= HW_PLATFORM_FPGA)
#if (IOT_SMART_GRID_ENABLE && (IOT_FLASH_SIZE < 4) && (!IOT_SMART_CONFIG) && \
(!IOT_BT_EXT_ENABLE))
#define IOT_CLI_UPGRADE_ENABLE 0
#else
#define IOT_CLI_UPGRADE_ENABLE 1
#endif
#else //HW_PLATFORM >= HW_PLATFORM_FPGA
#define IOT_CLI_UPGRADE_ENABLE 1
#endif
#if (HW_PLATFORM >= HW_PLATFORM_FPGA)
#if PLC_SUPPORT_CCO_ROLE || (PLC_SUPPORT_STA_ROLE && (!IOT_STA_CONTROL_MODE))
#define IOT_CLI_CKB_ADDR_MAPPING 1
#else
#define IOT_CLI_CKB_ADDR_MAPPING 0
#endif
#else
#define IOT_CLI_CKB_ADDR_MAPPING 1
#endif
/* support cli wl cmd */
#ifndef IOT_CLI_SUPPORT_WL_CMD
#if (PLC_SUPPORT_CCO_ROLE || (IOT_SMART_CONFIG && (!IOT_STA_CONTROL_MODE)))
#define IOT_CLI_SUPPORT_WL_CMD 1
#else
#define IOT_CLI_SUPPORT_WL_CMD 0
#endif
#endif
#ifndef IOT_CLI_IC_TOOL_EN
#define IOT_CLI_IC_TOOL_EN 0
#endif
#define IOT_CLI_RATE_TEST_EN (TARGET_VERSION != TARGET_KUNLUN)
/* CLI configuration end ******************************************************/
/* PHY configuration start ****************************************************/
/* improve pulse and spur performance in normal mode */
#define PHY_HIGH_PERF_EN 1
/* improve pulse and spur performance in cert mode */
#define PHY_CHIP_CERT_EN 0
/* spur war for Heilongjiang, Mengdong, Henan cert test bed */
#define PHY_BJ_CERT_SPUR_WAR 0
/* phy private offset phase support, just for non-1901'iot */
#define PHY_PRIVATE_OFFSET_PHASE (IOT_SMART_CONFIG && !SUPPORT_IEEE_1901)
/* phy hw spike optimization */
#define PHY_HW_SPIKE_OPTIMIZATION (TARGET_VERSION != TARGET_KUNLUN)
/* phy cal reasonable snr, enable kl2/3 */
#define PHY_CAL_REASONABLE_SNR (TARGET_VERSION != TARGET_KUNLUN)
/* bbai way to find peak.
* 1: fix windows to find the maximum value
* 2: slide windows to find the maximum value
*/
#define PHY_BBAI_FIX_WINDOWS 1
#define PHY_BBAI_SLIDE_WINDOWS 2
#if TARGET_VERSION == TARGET_KUNLUN3
#define PHY_BBAI_ALGORITHM PHY_BBAI_SLIDE_WINDOWS
#else
#define PHY_BBAI_ALGORITHM PHY_BBAI_FIX_WINDOWS
#endif
/* PHY configuration end*******************************************************/
#ifdef __cplusplus
}
#endif
#endif /* PLC_CONFIG_H */
Reference in New Issue Copy Permalink