From 85dd5cfa6dda403ddfdffe158194f33d56f9c31b Mon Sep 17 00:00:00 2001 From: andy <1414772332@qq.com> Date: Tue, 29 Oct 2024 19:28:39 +0800 Subject: [PATCH] =?UTF-8?q?=E6=B7=BB=E5=8A=A0=E7=A1=AC=E4=BB=B6=E8=AF=86?= =?UTF-8?q?=E5=88=AB=E7=A0=81=200x0D0A0113?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- driver/src/hal/board_info.c | 2 + inc/driver/iot_board.h | 5 + tools/oem/HTZD3211STA03_OEM.ini | 778 ++++++++++++++++++++++++++------ 3 files changed, 647 insertions(+), 138 deletions(-) diff --git a/driver/src/hal/board_info.c b/driver/src/hal/board_info.c index 1244ca9..bc75224 100644 --- a/driver/src/hal/board_info.c +++ b/driver/src/hal/board_info.c @@ -1205,6 +1205,7 @@ uint8_t iot_hardware_version_check_sg(uint32_t hw_version) case HW_VERSION_3PS_SPG_DM_FLASH_EXT_V1: case HW_VERSION_YP_3PS_DM_V1: case HW_VERSION_YP_STA_DM_V1: + case HW_VERSION_STA_DM_V7: return ERR_OK; default: return ERR_FAIL; @@ -1499,6 +1500,7 @@ bool_t iot_board_is_overseas_rf_band(void) hw_version == HW_VERSION_STA_DM_V4 || hw_version == HW_VERSION_CCO_DM_V3 || hw_version == HW_VERSION_STA_DM_V5 || + hw_version == HW_VERSION_STA_DM_V7 || hw_version == HW_VERSION_STA_3PS_DM_V4) { return true; } else { diff --git a/inc/driver/iot_board.h b/inc/driver/iot_board.h index 5ad2c12..53bdd19 100644 --- a/inc/driver/iot_board.h +++ b/inc/driver/iot_board.h @@ -321,6 +321,11 @@ extern "C" { */ #define HW_VERSION_PV_STA_RSD_EI12_V1_0 0x600A0100 +/* dual mode sta version 7, for Indonesia oversea */ +#define HW_VERSION_STA_DM_V7 0x0D0A0113 //13.10.1.19 + + + /* board id should not change and keep same as xxx_OEM.ini */ typedef enum board_id_t { BOARD_WQRDCCO01 = 1, diff --git a/tools/oem/HTZD3211STA03_OEM.ini b/tools/oem/HTZD3211STA03_OEM.ini index cb906e8..d9507e1 100644 --- a/tools/oem/HTZD3211STA03_OEM.ini +++ b/tools/oem/HTZD3211STA03_OEM.ini @@ -240,60 +240,6 @@ ledc #LEDC resource allocation 2 1 8 #IOT_PLC_NET_LED ledout 38 -#==================== 13.40.01.11(HW_VERSION_STA_LOAD_V3) ==================# -# overview -# gpio function gpio function gpio function -# 11 nc 10 nc 9 nc -# 42 nc 43 nc 39 pa_lic_ctr -# 38 nc 37 nc 36 nc -# 35 nc 34 nc 33 nc -# 32 set 31 charge_en 30 load_send -# 29 sta_out 28 uart2_tx 46 nc -# 45 nc 44 nc 47 nc -# 48 nc 49 nc 27 multi -# 1 tx_led 0 rx_led 3 pa_testp -# 2 pa_rx_en 4 pa_tx_en 7 pa_lan_gain_ctr0 -# 6 uart0_tx 5 uart0_rx 8 pa_lan_gain_ctr1 -# 26 pa_lan_gain_ctr2 50 nc 51 nc -# 52 nc 53 nc 54 nc -# 55 nc 56 nc 57 nc -# 58 nc 59 nc 61 nc -# 62 nc 64 m_sta(adc_0) 65 adc_12v -# 66 adc_3.3v 67 d_rst(soft reset) 68 zc_a_up -# 69 event 12 nc - -rc_hdr - hw_ver 0x0D28010B #13.40.01.11 - mode 1 - d_hw_ver 0x00000000 - -gpio #GPIO resource allocation -# A:gpio number; -# B:belongs to the core; -# C:function (to see iot_board_api.h about gpio type) -# A B C -# bbcpu spi gpio, query by plc core - 12 255 255 #GPIO_SPI_RF_CLK - 11 255 255 #GPIO_SPI_RF_MOSI - 10 255 255 #GPIO_SPI_RF_MISO - 9 255 255 #GPIO_SPI_RF_CS - - 34 255 255 #GPIO_RF_CLK - - 30 1 82 #GPIO_TSFM_LOAD_TRIGGER - - 27 1 127 #GPIO_MULTI_PULSE - -pwm #pwm resource allocation -# A:pwm channel; -# B:belongs to the core; -# C:function (to see iot_board_api.h about pwm type) -# A B C -# 小负载流程中， -# 获取GPIO30和PWM（PWM_CH_TYPE_TSFM_LOAD_CTRL）通道， -# 然后软件主动绑定。 - 1 1 3 #PWM_CH_TYPE_TSFM_LOAD_CTRL - #=============================== 13.10.01.12(HW_VERSION_STA_CKQ_DM_V1) ==============# # overview # gpio function gpio function gpio function @@ -371,89 +317,7 @@ pwm #pwm resource allocation # 然后软件主动绑定。 1 1 3 #PWM_CH_TYPE_TSFM_LOAD_CTRL -#================== 13.10.2.13(HW_VERSION_STA_DM_V4) ================# -# overview, for hx oversea -# gpio function gpio function gpio function -# 11 rf_spi_di 10 rf_spi_do 9 rf_spi_cs -# 42 rf_mclk 43 rf_fclk 39 pa_lic_ctr -# 38 charge_en 37 nc 36 nc -# 35 nc 34 rf_clk 33 nc -# 32 nc 31 nc 30 nc -# 29 nc 28 uart2_tx 46 rf_agc_gain -# 45 rf_enable 44 rf_txnrx 47 rf_dq0 -# 48 rf_dq1 49 rf_dq2 27 nc -# 1 tx/rx led 0 net_led 3 testp -# 2 pa_rx_en 4 pa_tx_en 7 pa_lan_gain_ctr0 -# 6 uart0_tx 5 uart0_rx 8 pa_lan_gain_ctr1 -# 26 pa_lan_gain_ctr2 50 rf_dq3 51 rf_dq4 -# 52 rf_dq5 53 rf_dq6 54 rf_dq7 -# 55 rf_dq8 56 rf_dq9 57 rf_dq10 -# 58 rf_dq11 59 rf_pd 61 rf_channel_sw(io) -# 62 rf_channel_sw(io) 64 m_sta(adc_gnd) 65 adc_12v -# 66 event 67 d_rst(soft reset) 68 zc_a -# 69 adc_3.3v 12 rf_spi_clk -rc_hdr - hw_ver 0x0D0A020D #13.10.2.13 - mode 1 - d_hw_ver 0x00000000 - -gpio -# A:gpio number; -# B:belongs to the core; -# C:function (to see iot_board_api.h about gpio type) -# A B C - 31 255 255 #GPIO_NO_VALID - 32 255 255 #GPIO_NO_VALID - 29 255 255 #GPIO_NO_VALID - 69 255 255 #GPIO_NO_VALID - 66 1 0 #GPIO_PLC_EVENT - 38 1 12 #GPIO_PM_CHARGE_EN - -adc #ADC resource allocation -# A:adc channel; -# B:belongs to the core; -# C:function (to see iot_board_api.h about adc type) -# A B C - 2 255 255 - 5 1 1 #ADC_PM_3V (Temporary annotation: Shielded supercapacitor) - -#================== 13.10.2.14(HW_VERSION_STA_3PS_DM_V4) ================# -# overview, for hx oversea -# gpio function gpio function gpio function -# 11 rf_spi_di 10 rf_spi_do 9 rf_spi_cs -# 42 rf_mclk 43 rf_fclk 39 pa_lic_ctr -# 38 charge_en 37 nc 36 nc -# 35 nc 34 rf_clk 33 nc -# 32 nc 31 nc 30 nc -# 29 nc 28 uart2_tx 46 rf_agc_gain -# 45 rf_enable 44 rf_txnrx 47 rf_dq0 -# 48 rf_dq1 49 rf_dq2 27 nc -# 1 tx/rx led 0 net_led 3 testp -# 2 pa_rx_en 4 pa_tx_en 7 pa_lan_gain_ctr0 -# 6 uart0_tx 5 uart0_rx 8 pa_lan_gain_ctr1 -# 26 pa_lan_gain_ctr2 50 rf_dq3 51 rf_dq4 -# 52 rf_dq5 53 rf_dq6 54 rf_dq7 -# 55 rf_dq8 56 rf_dq9 57 rf_dq10 -# 58 rf_dq11 59 rf_pd 61 rf_channel_sw(io) -# 62 rf_channel_sw(io) 64 m_sta(adc_gnd) 65 adc_12v -# 66 adc_3.3v 67 d_rst(soft reset) 68 zc_a -# 69 event 12 rf_spi_clk -rc_hdr - hw_ver 0x0D0A020E #13.10.2.14 - mode 1 - d_hw_ver 0x00000000 - -gpio -# A:gpio number; -# B:belongs to the core; -# C:function (to see iot_board_api.h about gpio type) -# A B C - 31 255 255 #GPIO_NO_VALID - 32 255 255 #GPIO_NO_VALID - 29 255 255 #GPIO_NO_VALID - 38 1 12 #GPIO_PM_CHARGE_EN - -#================== 13.10.2.15(HW_VERSION_STA_DM_V5) ================# +#================== 13.10.2.15(HW_VERSION_STA_3PS_DM_V5) ================# # overview, for hx oversea # gpio function gpio function gpio function # 11 rf_spi_di 10 rf_spi_do 9 rf_spi_cs @@ -528,4 +392,642 @@ gpio 36 1 71 #GPIO_SPI_FLASH_MISO 35 1 69 #GPIO_SPI_FLASH_CS - 27 1 127 #GPIO_MULTI_PULSE \ No newline at end of file + 27 1 127 #GPIO_MULTI_PULSE + +#=============================== 13.10.02.18(HW_VERSION_STA_3PS_RF_DM_V1) ====================================# +# overview, HZ3211RF v2, embedded rf and pa chip +# gpio function gpio function gpio function +# 71 adc_12v 39 tx_led 38 rx_led +# 37 flash_spi_miso 36 flash_spi_cs 35 flash_spi_clk +# 34 flash_spi_mosi 33 nc 32 nc +# 31 set(sta) 28 event 46 agc_gain(RF) +# 45 enable(RF) 44 txnrx(RF) 47 DIQ0 +# 48 DIQ1 49 DIQ2 1 nc +# 0 nc 3 nc 2 d_rst(soft reset) +# 4 sta_out 7 uart2_tx(log) 6 uart0_tx +# 5 uart0_rx 8 charge 26 zc_a +# 73 nc 72 nc 67 rf_channel_sw1(io) +# 68 rf_channel_sw2(io) 69 m_sta(adc_gnd) 70 adc_3.3v + +rc_hdr + hw_ver 0x0D0A0212 #13.10.02.18 Hardware identification, HEX + mode 0 + d_hw_ver 0xffffffff + +gpio #GPIO resource allocation +# A:gpio number; +# B:belongs to the core; +# C:function (to see iot_board_api.h about gpio type) +# A B C + #RF SPI (chip internal bus) + 9 1 107 #GPIO_SPI_RF_CLK + 10 1 110 #GPIO_SPI_RF_MOSI + 11 1 109 #GPIO_SPI_RF_MISO + 12 1 108 #GPIO_SPI_RF_CS + + 31 1 17 #GPIO_GOLDEN_SET + 5 1 24 #GPIO_GOLDEN_RXD0 + 6 1 34 #GPIO_GOLDEN_TXD0 + 4 1 1 #GPIO_STA_OUT + 28 1 0 #GPIO_PLC_EVENT + 8 1 12 #GPIO_PM_CHARGE_EN + 26 1 18 #GPIO_PA_ZC + 2 1 13 #GPIO_RST_CTRL + + 35 1 68 #GPIO_SPI_FLASH_CLK + 34 1 70 #GPIO_SPI_FLASH_MOSI + 37 1 71 #GPIO_SPI_FLASH_MISO + 36 1 69 #GPIO_SPI_FLASH_CS + +uart #UART resource allocation +# A:uart number; +# B:belongs to the core; +# C:function (to see iot_uart_api.h about uart type) +# A B C + 2 1 0 #UART_PRINT + tx 7 #gpio number corresponding to uart TX signal + + 0 1 2 #UART_METER_PORT + tx 6 #gpio number corresponding to uart TX signal + rx 5 #gpio number corresponding to uart RX signal + + 5 1 1 #UART_CLI_PORT + +#spi #SPI resource allocation, controlled by gpio resource now. +# A:spi number; +# B:belongs to the core; +# C:function +# A B C +# bbcpu use spi1 to connect external rf chip, fixed value used now. +# 1 2 0 #SPI_PORT_TYPE_PYH_RF +# cs 12 +# clk 9 +# miso 11 +# mosi 10 + +ledc #LEDC resource allocation +# A:ledc channel; +# B:belongs to the core; +# C:function +# ledout:The GPIO number corresponding to the output signal of LEDC +# (LEDC has only one signal, so it is unified ledOUT) +# A B C + 0 1 0 #IOT_PLC_TX_LED + ledout 39 + + 1 1 1 #IOT_PLC_RX_LED + ledout 38 + +adc #ADC resource allocation +# A:adc channel; +# B:belongs to the core; +# C:function (to see iot_board_api.h about adc type) +# A B C + 5 1 2 #ADC_PM_GND + 9 1 0 #ADC_PM_12V, ADC_CHANNEL7's value is 9 + 8 1 1 #ADC_PM_3V, ADC_CHANNEL6's value is 8 + +#zc # (PARTICULAR RESOURCE) Chip level zero crossing detection resource +# allocation, controlled by gpio resource now. +# up_0: Zero-crossing detection rising edge input channel 0, +# which corresponds to phase A rising edge zero-crossing +# circuit by default +# up_0 0 + +pa # (PARTICULAR RESOURCE) +# A:PA function name; +# B:PA gpio number; +# A B + rx_en_0 80 #enlic_pad_0. Phase A Enable receiving + tx_en_0 81 #enlic_pad_1. Phase A Enable sending + gain_0 82 #glna_pad_0. Phase A gain control + gain_1 83 #glna_pad_1. Phase B gain control + gain_2 84 #glna_pad_2. Phase C gain control + +#===================== 13.10.02.19(HW_VERSION_STA_GU_DM_V1) =====================# +# overview +# gpio function gpio function gpio function +# 11 rf_spi_di 10 rf_spi_do 9 rf_spi_cs +# 42 rf_mclk 43 rf_fclk 32 set(sta) +# 31 charge_en 29 sta_out 28 uart2_tx +# 46 rf_agc_gain 45 rf_enable 44 rf_txnrx +# 47 rf_dq0 48 rf_dq1 49 rf_dq2 +# 1 tx_led 0 rx_led 3 pa_testp(warning) +# 2 pa_rx_en 4 pa_tx_en 7 pa_lan_gain_ctr0 +# 6 uart0_tx 5 uart0_rx 8 pa_lan_gain_ctr1 +# 26 pa_lan_gain_ctr2 50 rf_dq3 51 rf_dq4 +# 52 rf_dq5 53 rf_dq6 54 rf_dq7 +# 55 rf_dq8 56 rf_dq9 57 rf_dq10 +# 58 rf_dq11 59 rf_pd 61 rf_channel_sw(io) +# 62 rf_channel_sw(io) 64 m_sta(adc_gnd) 65 adc_12v +# 66 adc_3.3v 67 d_rst(soft reset) 68 zc_a +# 69 event 12 rf_spi_clk 39 pa_lic_ctr +# 34 rf_clk + +rc_hdr + hw_ver 0x0D0A0213 #13.10.02.19 Hardware identification, HEX + mode 1 + d_hw_ver 0x00000000 + +#=============================== 13.10.01.11(HW_VERSION_BSRM_DM_V2) ===============================# +# overview, HZ3201 board +# gpio function gpio function gpio function +# 11 rf_spi_mosi 10 rf_spi_miso 9 rf_spi_cs +# 42 rf_mclk 43 rf_fclk 39 zc_a +# 38 uart1_tx 37 uart1_rx 36 pwr_det +# 35 event 34 rf_clk 33 nc +# 32 nc 31 nc 30 nc +# 29 nc 28 uart2_tx 46 rf_agc_gain +# 45 rf_enable 44 rf_txnrx 47 rf_dq0 +# 48 rf_dq1 49 rf_dq2 1 tx_led +# 0 rx_led 3 pa_testp(warning) 2 pa_a_rx_en +# 4 pa_a_tx_en 7 pa_lan_gain_ctr0 6 uart0_tx +# 5 uart0_rx 8 pa_lan_gain_ctr1 26 pa_lan_gain_ctr2 +# 50 rf_dq3 51 rf_dq4 52 rf_dq5 +# 53 rf_dq6 54 rf_dq7 55 rf_dq8 +# 56 rf_dq9 57 rf_dq10 58 rf_dq11 +# 59 rf_pd 61 pa_lic_ctr 62 rf_channel_sw2 +# 64 adc0_a+ 65 adc1_a- 66 adc2_b+ +# 67 adc3_b- 68 adc4_c+ 69 adc5_c- +# 12 rf_spi_clk + +rc_hdr + hw_ver 0x0D0A010B #13.10.01.11 Hardware identification, HEX + mode 0 + d_hw_ver 0xffffffff + +gpio #GPIO resource allocation +# A:gpio number; +# B:belongs to the core; +# C:function(to see iot_board_api.h about gpio type) +# A B C +# bbcpu spi gpio, query by plc core + 9 1 108 #GPIO_SPI_RF_CS + 11 1 110 #GPIO_SPI_RF_MOSI + 10 1 109 #GPIO_SPI_RF_MISO + 12 1 107 #GPIO_SPI_RF_CLK + + 39 1 18 #GPIO_PA_ZC + 36 1 123 #GPIO_P12V_DETECTION + 35 1 0 #GPIO_PLC_EVENT + 34 1 121 #GPIO_RF_CLK + 61 1 120 #GPIO_LIC_CTRL + + 3 1 10 #GPIO_GEODE_OVT + +uart #UART resource allocation +# A:uart number; +# B:belongs to the core; +# C:function (to see iot_uart_api.h about uart type) +# A B C + 2 1 0 #UART_PRINT + tx 28 + + 1 1 2 #UART_METER_PORT + tx 38 + rx 37 + + 5 1 1 #UART_CLI_PORT + +#spi #SPI resource allocation, controlled by gpio resource now. +# A:spi number; +# B:belongs to the core; +# C:function +# A B C +# bbcpu use spi1 to connect external rf chip, fixed value used now. +# 1 2 0 #SPI_PORT_TYPE_PYH_RF +# cs 9 +# clk 12 +# miso 10 +# mosi 11 + +ledc #LEDC resource allocation +# A:ledc channel; +# B:belongs to the core; +# C:function +# A B C + 0 1 0 #IOT_PLC_TX_LED + ledout 1 + + 1 1 1 #IOT_PLC_RX_LED + ledout 0 + +adc #ADC resource allocation +# A:adc channel; +# B:belongs to the core; +# C:function (to see iot_board_api.h about adc type) +# A B C + +#zc # (PARTICULAR RESOURCE) Chip level zero crossing detection resource +# allocation, controlled by gpio resource now. +# up_0: Zero-crossing detection rising edge input channel 0, +# which corresponds to phase A rising edge zero-crossing +# circuit by default +# up_0 39 + +pa # (PARTICULAR RESOURCE) + rx_en_0 2 #Phase A Enable receiving + tx_en_0 4 #Phase A Enable sending + gain_0 7 #Phase A gain control + gain_1 8 #Phase B gain control + gain_2 26 #Phase C gain control + +#===================== 13.10.01.15(HW_VERSION_STA_CKQ_DM_V2) =====================# +# overview +# gpio function gpio function gpio function +# 11 rf_spi_di 10 rf_spi_do 9 rf_spi_cs +# 42 rf_mclk 43 rf_fclk 39 pa_lic_ctr +# 38 nc 37 csd 36 nc +# 35 nc 34 rf_clk 33 nc +# 32 set(sta) 31 nc 30 nc +# 29 sta_out 28 uart2_tx 46 rf_agc_gain +# 45 rf_enable 44 rf_txnrx 47 rf_dq0 +# 48 rf_dq1 49 rf_dq2 27 nc +# 1 tx_led 0 rx_led 3 pa_testp(warning) +# 2 pa_rx_en 4 pa_tx_en 7 pa_lan_gain_ctr0 +# 6 uart0_tx 5 uart0_rx 8 pa_lan_gain_ctr1 +# 26 pa_lan_gain_ctr2 50 rf_dq3 51 rf_dq4 +# 52 rf_dq5 53 rf_dq6 54 rf_dq7 +# 55 rf_dq8 56 rf_dq9 57 rf_dq10 +# 58 rf_dq11 59 rf_pd 61 rf_channel_sw_cps(io) +# 62 rf_channel_sw_ctx(io) 64 m_sta(adc_gnd) 65 adc_12v +# 66 nc 67 d_rst(soft reset) 68 zc_a +# 69 event 12 rf_spi_clk + +rc_hdr + hw_ver 0x0D0A010F #13.10.0.15 Hardware identification, HEX + mode 1 + d_hw_ver 0x00000000 + +gpio #GPIO resource allocation +# A:gpio number; +# B:belongs to the core; +# C:function (to see iot_board_api.h about gpio type) +# A B C + 31 255 255 #GPIO_NO_VALID + 37 1 133 #GPIO_RF_PA_CSD + 62 1 134 #GPIO_RF_PA_CTX + +adc #ADC resource allocation +# A:adc channel; +# B:belongs to the core; +# C:function (to see iot_board_api.h about adc type) +# A B C + 2 255 255 + +#===================== 13.10.02.22(HW_VERSION_STA_3PS_DM_V6) =====================# +# overview +# gpio function gpio function gpio function +# 11 rf_spi_di 10 rf_spi_do 9 rf_spi_cs +# 42 rf_mclk 43 rf_fclk 39 pa_lic_ctr +# 38 nc 37 csd 36 nc +# 35 nc 34 rf_clk 33 nc +# 32 gpio_12v_det 31 nc 30 nc +# 29 pwr_led 28 uart2_tx 46 rf_agc_gain +# 45 rf_enable 44 rf_txnrx 47 rf_dq0 +# 48 rf_dq1 49 rf_dq2 27 nc +# 1 tx_led 0 rx_led 3 pa_testp(warning) +# 2 pa_rx_en 4 pa_tx_en 7 pa_lan_gain_ctr0 +# 6 uart0_tx 5 uart0_rx 8 pa_lan_gain_ctr1 +# 26 pa_lan_gain_ctr2 50 rf_dq3 51 rf_dq4 +# 52 rf_dq5 53 rf_dq6 54 rf_dq7 +# 55 rf_dq8 56 rf_dq9 57 rf_dq10 +# 58 rf_dq11 59 rf_pd 61 rf_channel_sw_cps(io) +# 62 rf_channel_sw_ctx(io) 64 m_sta(adc_gnd) 65 adc_12v +# 66 nc 67 nc 68 zc_a +# 69 nc 12 rf_spi_clk + +rc_hdr + hw_ver 0x0D0A0216 #13.10.02.22 Hardware identification, HEX + mode 1 + d_hw_ver 0x00000000 + +gpio #GPIO resource allocation +# A:gpio number; +# B:belongs to the core; +# C:function (to see iot_board_api.h about gpio type) +# A B C + 29 255 255 #GPIO_NO_VALID + 31 255 255 #GPIO_NO_VALID + 32 1 123 #GPIO_P12V_DETECTION + 37 1 133 #GPIO_RF_PA_CSD + 62 1 134 #GPIO_RF_PA_CTX + 67 255 255 #GPIO_NO_VALID + 69 255 255 #GPIO_NO_VALID + +adc #ADC resource allocation +# A:adc channel; +# B:belongs to the core; +# C:function (to see iot_board_api.h about adc type) +# A B C + 1 255 255 + 2 255 255 + +ledc #LEDC resource allocation +# A:ledc channel; +# B:belongs to the core; +# C:function +# ledout:The GPIO number corresponding to the output signal of LEDC +# (LEDC has only one signal, so it is unified ledOUT) +# A B C + 2 1 8 #IOT_PLC_NET_LED + ledout 29 + +#================== 13.10.01.16(HW_VERSION_STA_3PS_SPG_DM_FLASH_EXT_V2) ================# +# overview +# add:38 37 36 35 flash spi +# remove:32 set(sta),29 sta_out +# gpio function gpio function gpio function +# 11 rf_spi_di 10 rf_spi_do 9 rf_spi_cs +# 42 rf_mclk 43 rf_fclk 39 pa_lic_ctr +# 38 flash_spi_clk 37 flash_spi_mosi 36 flash_spi_miso +# 35 flash_spi_cs 34 rf_clk 33 nc +# 32 nc 31 charge_en 30 nc +# 29 nc 28 uart2_tx 46 rf_agc_gain +# 45 rf_enable 44 rf_txnrx 47 rf_dq0 +# 48 rf_dq1 49 rf_dq2 27 nc +# 1 tx_led 0 rx_led 3 pa_testp(warning) +# 2 pa_rx_en 4 pa_tx_en 7 pa_lan_gain_ctr0 +# 6 uart0_tx 5 uart0_rx 8 pa_lan_gain_ctr1 +# 26 pa_lan_gain_ctr2 50 rf_dq3 51 rf_dq4 +# 52 rf_dq5 53 rf_dq6 54 rf_dq7 +# 55 rf_dq8 56 rf_dq9 57 rf_dq10 +# 58 rf_dq11 59 rf_pd 61 rf_channel_sw(io) +# 62 rf_channel_sw(io) 64 m_sta(adc_gnd) 65 adc_12v +# 66 adc_3.3v 67 d_rst(soft reset) 68 zc_a +# 69 event 12 rf_spi_clk +rc_hdr + hw_ver 0x0D0A0110 #13.10.01.16 + mode 1 + d_hw_ver 0x00000000 + +gpio +# A:gpio number; +# B:belongs to the core; +# C:function (to see iot_board_api.h about gpio type) +# A B C + 38 1 68 #GPIO_SPI_FLASH_CLK + 37 1 70 #GPIO_SPI_FLASH_MOSI + 36 1 71 #GPIO_SPI_FLASH_MISO + 35 1 69 #GPIO_SPI_FLASH_CS + + 32 255 255 #GPIO_NO_VALID + 29 255 255 #GPIO_NO_VALID + +#============ 13.10.01.17(HW_VERSION_STA_3PS_SPG_DM_FLASH_EXT_V3) ===========# +# overview +# add:38 37 36 35 flash spi,30 load_send +# remove:32 set(sta),29 sta_out +# gpio function gpio function gpio function +# 11 rf_spi_di 10 rf_spi_do 9 rf_spi_cs +# 42 rf_mclk 43 rf_fclk 39 pa_lic_ctr +# 38 flash_spi_clk 37 flash_spi_mosi 36 flash_spi_miso +# 35 flash_spi_cs 34 rf_clk 33 nc +# 32 nc 31 charge_en 30 load_send +# 29 nc 28 uart2_tx 46 rf_agc_gain +# 45 rf_enable 44 rf_txnrx 47 rf_dq0 +# 48 rf_dq1 49 rf_dq2 27 nc +# 1 tx_led 0 rx_led 3 pa_testp(warning) +# 2 pa_rx_en 4 pa_tx_en 7 pa_lan_gain_ctr0 +# 6 uart0_tx 5 uart0_rx 8 pa_lan_gain_ctr1 +# 26 pa_lan_gain_ctr2 50 rf_dq3 51 rf_dq4 +# 52 rf_dq5 53 rf_dq6 54 rf_dq7 +# 55 rf_dq8 56 rf_dq9 57 rf_dq10 +# 58 rf_dq11 59 rf_pd 61 rf_channel_sw(io) +# 62 rf_channel_sw(io) 64 m_sta(adc_gnd) 65 adc_12v +# 66 adc_3.3v 67 d_rst(soft reset) 68 zc_a +# 69 event 12 rf_spi_clk +rc_hdr + hw_ver 0x0D0A0111 #13.10.01.17 + mode 1 + d_hw_ver 0x0D0A0110 + +gpio +# A:gpio number; +# B:belongs to the core; +# C:function (to see iot_board_api.h about gpio type) +# A B C + 30 1 82 #GPIO_TSFM_LOAD_TRIGGER + +pwm #pwm resource allocation +# A:pwm channel; +# B:belongs to the core; +# C:function (to see iot_board_api.h about pwm type) +# A B C +# 小负载流程中， +# 获取GPIO30和PWM（PWM_CH_TYPE_TSFM_LOAD_CTRL）通道， +# 然后软件主动绑定。 + 1 1 3 #PWM_CH_TYPE_TSFM_LOAD_CTRL + +#================= 13.10.01.18(HW_VERSION_STA_3PS_SPG_DM_FLASH_EXT_V4) ================# +# overview +# add: 27 multi, 38 37 36 35 flash spi, 30 load_send +# gpio function gpio function gpio function +# 11 rf_spi_di 10 rf_spi_do 9 rf_spi_cs +# 42 rf_mclk 43 rf_fclk 39 pa_lic_ctr +# 38 flash_spi_clk 37 flash_spi_mosi 36 flash_spi_miso +# 35 flash_spi_cs 34 rf_clk 33 nc +# 32 set(sta) 31 charge_en 30 load_send +# 29 sta_out 28 uart2_tx 46 rf_agc_gain +# 45 rf_enable 44 rf_txnrx 47 rf_dq0 +# 48 rf_dq1 49 rf_dq2 27 multi +# 1 tx_led 0 rx_led 3 pa_testp(warning) +# 2 pa_rx_en 4 pa_tx_en 7 pa_lan_gain_ctr0 +# 6 uart0_tx 5 uart0_rx 8 pa_lan_gain_ctr1 +# 26 pa_lan_gain_ctr2 50 rf_dq3 51 rf_dq4 +# 52 rf_dq5 53 rf_dq6 54 rf_dq7 +# 55 rf_dq8 56 rf_dq9 57 rf_dq10 +# 58 rf_dq11 59 rf_pd 61 rf_channel_sw(io) +# 62 rf_channel_sw(io) 64 m_sta(adc_gnd) 65 adc_12v +# 66 adc_3.3v 67 d_rst(soft reset) 68 zc_a +# 69 event 12 rf_spi_clk +rc_hdr + hw_ver 0x0D0A0112 #13.10.01.18 + mode 1 + d_hw_ver 0x0D0A010D + +gpio +# A:gpio number; +# B:belongs to the core; +# C:function (to see iot_board_api.h about gpio type) +# A B C + 30 1 82 #GPIO_TSFM_LOAD_TRIGGER + +pwm #pwm resource allocation +# A:pwm channel; +# B:belongs to the core; +# C:function (to see iot_board_api.h about pwm type) +# A B C +# 小负载流程中， +# 获取GPIO30和PWM（PWM_CH_TYPE_TSFM_LOAD_CTRL）通道， +# 然后软件主动绑定。 + 1 1 3 #PWM_CH_TYPE_TSFM_LOAD_CTRL + +#================= 13.10.02.23(HW_VERSION_STA_3PS_RF_DM_LOAD_V1) =================# +# overview, HZ3211RF v2, embedded rf and pa chip +# gpio function gpio function gpio function +# 71 adc_12v 39 tx_led 38 rx_led +# 37 flash_spi_miso 36 flash_spi_cs 35 flash_spi_clk +# 34 flash_spi_mosi 33 nc 32 multi +# 31 rxd1 28 event 46 agc_gain(RF) +# 45 enable(RF) 44 txnrx(RF) 47 nc +# 48 nc 49 DIQ2 1 nc +# 0 nc 3 load_send 2 d_rst(soft reset) +# 4 txd1 7 uart2_tx(log) 6 uart0_tx +# 5 uart0_rx 8 charge 26 zc_c +# 73 nc 72 nc 67 rf_channel_sw1(io) +# 68 rf_channel_sw2(io) 69 m_sta(adc_gnd) 70 adc_3.3v +rc_hdr + hw_ver 0x0D0A0217 #13.10.02.23 Hardware identification, HEX + mode 1 + d_hw_ver 0x0D0A0212 + +gpio #GPIO resource allocation +# A:gpio number; +# B:belongs to the core; +# C:function (to see iot_board_api.h about gpio type) +# A B C + 3 1 82 #GPIO_TSFM_LOAD_TRIGGER + 32 1 127 #GPIO_MULTI_PULSE + +pwm #pwm resource allocation +# A:pwm channel; +# B:belongs to the core; +# C:function (to see iot_board_api.h about pwm type) +# A B C +# 小负载流程中， +# 获取GPIO3和PWM（PWM_CH_TYPE_TSFM_LOAD_CTRL）通道， +# 然后软件主动绑定。 + 1 1 3 #PWM_CH_TYPE_TSFM_LOAD_CTRL + +uart #UART resource allocation +# A:uart number; +# B:belongs to the core; +# C:function (to see iot_uart_api.h about uart type) +# A B C + 1 1 17 #UART_METER_PORT_2 + tx 4 + rx 31 + + + +#=============================== default rc====================================# +# overview +# gpio function gpio function gpio function +# 11 rf_spi_di 10 rf_spi_do 9 rf_spi_cs +# 42 rf_mclk 43 rf_fclk 39 pa_lic_ctr +# 38 att_spi_clk 37 att_spi_mosi 36 att_spi_miso +# 35 att_spi_cs 34 rf_clk 33 nc +# 32 csd 31 charge_en 30 att_nrst +# 29 nc 28 uart2_tx 46 rf_agc_gain +# 45 rf_enable 44 rf_txnrx 47 rf_dq0 +# 48 rf_dq1 49 rf_dq2 27 nc +# 1 tx_led 0 rx_led 3 pa_testp(warning) +# 2 pa_rx_en 4 pa_tx_en 7 pa_lna_gain_ctr0 +# 6 uart0_tx 5 uart0_rx 8 pa_lna_gain_ctr1 +# 26 pa_lna_gain_ctr2 50 rf_dq3 51 rf_dq4 +# 52 rf_dq5 53 rf_dq6 54 rf_dq7 +# 55 rf_dq8 56 rf_dq9 57 rf_dq10 +# 58 rf_dq11 59 rf_pd 61 cps +# 62 ctx 64 m_sta(adc_gnd) 65 adc_12v +# 66 adc_3.3v 67 nc 68 zc_a +# 69 nc 12 rf_spi_clk + +rc_hdr + hw_ver 0x0D0A0113 #00.00.00.00 Hardware identification, HEX + mode 0 + d_hw_ver 0xffffffff + +gpio #GPIO resource allocation +# A:gpio number; +# B:belongs to the core; +# C:function (to see iot_board_api.h about gpio type) +# A B C +# bbcpu spi gpio, query by plc core + 12 1 107 #GPIO_SPI_RF_CLK + 11 1 110 #GPIO_SPI_RF_MOSI + 10 1 109 #GPIO_SPI_RF_MISO + 9 1 108 #GPIO_SPI_RF_CS + + 3 1 10 #GPIO_GEODE_OVT + + 32 1 17 #GPIO_GOLDEN_SET + 5 1 24 #GPIO_GOLDEN_RXD0 + 6 1 34 #GPIO_GOLDEN_TXD0 + + 31 1 12 #GPIO_PM_CHARGE_EN + 68 1 18 #GPIO_PA_ZC + 39 1 120 #GPIO_LIC_CTRL + + 34 1 121 #GPIO_RF_CLK + + 38 1 62 #GPIO_METER_CLK_CTRL + 37 1 64 #GPIO_METER_MOSI_CTRL + 36 1 63 #GPIO_METER_MISO_CTRL + 35 1 61 #GPIO_METER_CS_CTRL + 30 1 40 #GPIO_METER_RST_CTRL + + 32 1 133 #GPIO_RF_PA_CSD + 62 1 134 #GPIO_RF_PA_CTX + +uart #UART resource allocation +# A:uart number; +# B:belongs to the core; +# C:function (to see iot_uart_api.h about uart type) +# A B C + 2 1 0 #UART_PRINT + tx 28 #gpio number corresponding to uart TX signal + + 0 1 2 #UART_METER_PORT + tx 6 #gpio number corresponding to uart TX signal + rx 5 #gpio number corresponding to uart RX signal + + 5 1 1 #UART_CLI_PORT + +#spi #SPI resource allocation, controlled by gpio resource now. +# A:spi number; +# B:belongs to the core; +# C:function +# A B C +# bbcpu use spi1 to connect external rf chip, fixed value used now. +# 1 2 0 #SPI_PORT_TYPE_PYH_RF +# cs 9 +# clk 12 +# miso 10 +# mosi 11 + +ledc #LEDC resource allocation +# A:ledc channel; +# B:belongs to the core; +# C:function +# ledout:The GPIO number corresponding to the output signal of LEDC +# (LEDC has only one signal, so it is unified ledOUT) +# A B C + 0 1 0 #IOT_PLC_TX_LED + ledout 1 + + 1 1 1 #IOT_PLC_RX_LED + ledout 0 + +adc #ADC resource allocation +# A:adc channel; +# B:belongs to the core; +# C:function (to see iot_board_api.h about adc type) +# A B C + 0 1 2 #ADC_PM_GND (Temporary annotation) + 1 1 0 #ADC_PM_12V (Temporary annotation) + 2 1 1 #ADC_PM_3V (Temporary annotation: Shielded supercapacitor) + +#zc # (PARTICULAR RESOURCE) Chip level zero crossing detection resource +# allocation, controlled by gpio resource now. +# up_0: Zero-crossing detection rising edge input channel 0, +# which corresponds to phase A rising edge zero-crossing +# circuit by default +# up_0 68 + +pa # (PARTICULAR RESOURCE) + rx_en_0 2 #Phase A Enable receiving + tx_en_0 4 #Phase A Enable sending + gain_0 7 #Phase A gain control 0 + gain_1 8 #Phase A gain control 1 + gain_2 26 #Phase A gain control 2 \ No newline at end of file