初始提交

2024-09-28 14:24:04 +08:00
commit c756587541
5564 changed files with 2413077 additions and 0 deletions
--- a/dtest/kl2_ate_test/ate_main.h
+++ b/dtest/kl2_ate_test/ate_main.h
@@ -0,0 +1,91 @@
+/****************************************************************************
+
+Copyright(c) 2019 by Aerospace C.Power (Chongqing) Microelectronics. ALL RIGHTS RESERVED.
+
+This Information is proprietary to Aerospace C.Power (Chongqing) Microelectronics and MAY NOT
+be copied by any method or incorporated into another program without
+the express written consent of Aerospace C.Power. This Information or any portion
+thereof remains the property of Aerospace C.Power. The Information contained herein
+is believed to be accurate and Aerospace C.Power assumes no responsibility or
+liability for its use in any way and conveys no license or title under
+any patent or copyright and makes no representation or warranty that this
+Information is free from patent or copyright infringement.
+
+****************************************************************************/
+
+#ifndef __ATE_MAIN_H
+#define __ATE_MAIN_H
+
+#include "os_types.h"
+#include "phy_cal.h"
+
+#pragma pack(push)  /* save the pack status */
+#pragma pack(1)     /* 1 byte align */
+
+#define ATE_TONE_3M                     (41)
+
+#define PHY_NF_RST_VAL                  (121)
+#define PHY_NF_RTY_CNT                  (10)
+#define PMU_ICCAL_NUM                   (32)
+
+/* ATE software version */
+#define ATE_SW_VER              ("SW_V1.0_20190221")
+
+#define ERR_BIT(a)              (0x00000001<<(a)) // | 0x00000002)
+
+typedef enum _iot_ftm_result {
+    ATE_TEST_OK     = 0x01,
+    ATE_TEST_FAIL   = 0xFF,
+} iot_ftm_result_t;
+
+typedef enum _iot_ate_flags {
+    ATE_FLAG_OK = 0x0,          // TEST OK
+    ATE_DDR_FAIL_FREQ = 0x1,    // swtich cpu freqence failed
+    ATE_DDR_FAIL_INIT = 0x2,    // ddr training failed
+    ATE_DDR_FAIL_BOND = 0x3,    // ddr bond test
+    ATE_FLASH_FAIL_BOND = 0x4,  // flash bond test
+    ATE_FLASH_FAIL_ID   = 0x5,  // flash id failed
+    ATE_FLASH_FAIL_INIT = 0x6,  // flash init failed
+    ATE_FLASH_FAIL_QUAD = 0x7,  // flash quad mode failed
+    ATE_FLASH_FAIL_ERASE = 0x8, // flash erase failed
+    ATE_FLASH_FAIL_PRGM = 0x9,  // flash program failed
+    ATE_FLASH_FAIL_READ = 0x10, // flash read failed
+} iot_ate_flags;
+
+/* ate total info structure: start from 0xfff8000 */
+typedef struct _ate_info {
+    uint8_t     result;
+    uint32_t    ret_flag;
+    uint16_t    tx_dc[4];
+    uint16_t    rx_dc[PHY_GAIN_STEP_MAX]; //PHY_GAIN_STEP_MAX = 85
+    int8_t      csi_snr[16];
+    int8_t      csi_amp[16];
+    uint8_t     rx_band_filter[8];
+    uint32_t    nf;
+    int32_t     doffset_avg;//0xfff80e3
+    int32_t     dx_avg;//0xfff80e7
+    int32_t     dy_avg;//0xfff80eb
+    float       vref;//0xfff80ef
+    int32_t     dc_offset;//0xfff80f3
+    int32_t     ch1_adc3_v[PMU_ICCAL_NUM]; //PMU_ICCAL_NUM = 32,0xfff80f7
+    uint32_t    cnt;
+    uint8_t     sw_version[22];
+    uint8_t     mac[6];
+    uint32_t    chip_id;
+    uint32_t    rsv[4];//0xfff8173
+} ate_info_t;
+
+typedef struct _ate_loop_back_gain_list {
+    int8_t      tx_tone_att;
+    int8_t      tx_factor;
+    uint8_t     tx_pga_gain;
+    uint8_t     rx_pgf_gain;
+    uint8_t     rx_bq_gain;
+    uint8_t     rx_pga_gain;
+    int8_t      rx_gain_shift;
+    uint8_t     rx_lna_gain;
+} ate_loop_back_gain_list_t;
+
+#pragma pack(pop)   /* restore the pack status */
+
+#endif // !__ATE_MAIN_H