# OUTPUT type
# 1 - .out
# 2 - .a
# 3 - .so
OUTPUT_TYPE	= 0
OUTPUT_NAME	= dtest

ifeq ($(target), kunlun2)
hw_dep = hw2
else
   ifeq ($(target), kunlun3)
      hw_dep = hw3
   else
      hw_dep = hw
   endif
endif

SUB_DIRS    = startup
SUB_DIRS    += ../plc/halphy

ifeq ($(target), kunlun2)
# for k3d demo, use it must patch k3d_demo
#SUB_DIRS += camera_test k3d_demo_test
SUB_DIRS += memtest_kl2 diag_test ddr_test matrix_test kl2_i2s_test monitor_test emac_test_kl2
SUB_DIRS += afft_test kl2_dma_device_test flash_test kl2_i2c_test simd_test
SUB_DIRS += security_test ecc_test led_ctrl_test
#SUB_DIRS += mac_tx_test mac_rx_test ada_test
SUB_DIRS += efuse_write_test efuse_test

SUB_DIRS = sadc_pwm_test
SUB_DIRS = download_file_test
SUB_DIRS = flash_test
SUB_DIRS = kl2_pwm_test ddr_training_test gpio_test
SUB_DIRS = kl2_muticore_uart_test/kl2_core1_uart1_test kl2_muticore_uart_test/kl2_core2_uart2_test
else
ifeq ($(target), kunlun3)
SUB_DIRS = dtest3
else
SUB_DIRS += mac_tx_test mac_rx_test ada_test
SUB_DIRS += uart_test mtd_test dhrystone gpio_test spi_test upgrade_test watchdog_test sec_test dma_sw_test i2s_test i2c_test emac_test pwm_test
SUB_DIRS += dhrystone upgrade_test watchdog_test sec_test
SUB_DIRS += memtest flash_test diag_test sram_test exception_test cache_test jump_test
SUB_DIRS += efuse_write_test efuse_test dma_uart_test gpio_mtx_test mqtt_test
SUB_DIRS += security_test ecc_test crypto_benchmark flash_cmd
SUB_DIRS += kl1_fdma_mst_test
endif
endif

ifeq ($(dtest_only), 1)
    PRE_MARCO += IOT_DTEST_ONLY_SUPPORT=1
endif

# .h files dir
ADD_INCLUDE	+= $(TOPDIR)/inc/pkt $(TOPDIR)/inc/io_lib $(TOPDIR)/plc/inc $(TOPDIR)/plc/inc/mme \
			$(TOPDIR)/plc/halphy/inc $(TOPDIR)/inc/os_shim $(TOPDIR)/inc/compiler/gcc \
			$(TOPDIR)/plc/halmac/inc $(TOPDIR)/inc/utils $(TOPDIR)/plc/halmac/$(hw_dep)/inc/desc  \
			$(TOPDIR)/plc/halmac/$(hw_dep)/inc/reg $(TOPDIR)/plc/halmac/$(hw_dep)/inc $(TOPDIR)/plc/halphy/$(hw_dep)/inc \
			$(TOPDIR)/inc/driver $(TOPDIR)/dtest/common $(TOPDIR)/plc/common/inc $(TOPDIR)/export/inc/os_shim
ifeq ($(target), kunlun2)
ADD_INCLUDE += $(TOPDIR)/driver/src/hw2/inc
else
   ifeq ($(target), kunlun3)
      ADD_INCLUDE += $(TOPDIR)/driver/src/hw3/inc
   else
      ADD_INCLUDE += $(TOPDIR)/driver/src/hw/inc
   endif
endif

# predefined macro
PRE_MARCO	+=

# lib dir
ADD_LIBDIR	=

# lib need to ld together
ADD_LIB		=

#$(warning TOPDIR=$(TOPDIR))

ifdef TOPDIR
include $(TOPDIR)/build/makefile.cfg
else
include $(CURDIR)/build/makefile.cfg
TOPDIR		= $(CURDIR)
export TOPDIR
endif

# display the obj files and output name
debug:
	@echo TOPDIR=$(TOPDIR)
	@echo OUTPUT_LIB=$(OUTPUT_FULL_NAME)
	@echo DEPS=$(DEPS)
	@echo OBJECTS=$(OBJECTS)
	@echo SRCS=$(SRCS)
	@echo OBJECTS folder=$(foreach dirname, $(SUB_DIRS), $(addprefix $(BIN_DIR)/, $(dirname)))
	@echo output_name=$(OUTPUT_FULL_NAME)