/* os shim includes */
#include "os_types.h"
#include "dbg_io.h"
#include "iot_io.h"
#include "gpio_mtx.h"
#include "pwm.h"
#include "clk.h"
#include "gpio_hw.h"
#include "iot_gpio_api.h"
/*
Only used for testing kl1,
kl2 see dtest/kl2_pwm_test,
kl3 see dtest/dtest3/unit_test_pwm
*/
extern void clk_core_freq_150m_set();
extern int pwm_dead_band_config(uint8_t ch, uint32_t rising_db, uint32_t falling_db,
                       uint32_t *rising_actual, uint32_t *falling_actual);
extern void pwm_fault_config(uint8_t ch, uint8_t gpio,
    uint8_t h_state, uint8_t l_state,pwm_isr cb);

uint32_t pwm_falut_cb(void)
{
    iot_printf("fault\r\n");
    return 0;
}

void pwm_main(void)
{
    volatile uint32_t delay = 0;
    uint8_t duty = 20;
    uint8_t ch = PWM_CHANNEL_0;
    uint8_t test_for_single_mode = 0;

    uint32_t clk_freq = 0;
    uint32_t period = 100;
    //clk_core_freq_150m_set();
    dbg_uart_init();

    if (test_for_single_mode) {
        pwm_single_mode_init(ch);
        pwm_set_duty(ch, duty * 100);

        while (1) {
            /* pwm output init */
            pwm_set_period(ch, 1000);
            pwm_set_duty(ch, 50 * 100);
            pwm_ch_init(ch);
            pwm_start_for_single(ch);

            iot_printf("pwm single mode running...\n");
            delay = 10000000;
            while(delay--);
       }
   } else {

        uint8_t clk_table[] = {IOT_PWM_CLK_SRC_2M5, IOT_PWM_CLK_SRC_25M, IOT_PWM_CLK_SRC_50M};
        pwm_init(ch);
        pwm_config(ch, clk_table[0], 10000, 34, 35);


        clk_freq = pwm_get_ch_clk(ch);
        iot_printf("clk_freq=%d\r\n", clk_freq);


        pwm_set_period(ch, 2500);

        pwm_set_duty(ch, 50 * 100);

        pwm_fault_config(ch, 9, 0, 0, pwm_falut_cb);

        uint32_t a,b;
        if( pwm_dead_band_config(ch, 2020, 600, &a, &b) < 0)
        {
            iot_printf("dead_band_set err\r\n");
        }

        int gpio_o = 28;
        //hw_gpio_api_table.gpio_init();
        //hw_gpio_api_table.set_gpio_mode(gpio_o, GPIO_OUTPUT);
        //gpio_pin_select(gpio_o, gpio_pin_func_get(gpio_o));
        //gpio_mtx_sig_out_default(0xFF, gpio_o);


        while(1) {
            if (0) {
                hw_gpio_api_table.set_value(gpio_o, 1);
                pwm_start(ch);
                delay = 1000000;
                while (delay--);

                hw_gpio_api_table.set_value(gpio_o, 0);
                pwm_stop(ch);
                delay = 1000000;
                while (delay--);
            }
        }
        while(1) {


            iot_printf("clk_freq=%d\r\n", clk_freq);
            pwm_set_period(ch, period);

            period += 100;
            if (period > 1000) {
                period = 100;
            }


            for (duty = 0; duty <= 100; duty += 5) {
                pwm_set_duty(ch, duty * 100);
                iot_printf("PWM Duty: %d%%\r\n",duty);
                delay = 1000000;
                while (delay--);
            }

            for (duty = 100; duty > 0; duty -= 5) {
                pwm_set_duty(ch, duty * 100);
                iot_printf("PWM Duty: %d%%\r\n",duty);
                delay = 1000000;
                while (delay--);
            }
        }
    }
}

#ifdef __GNUC__

int main(void)
{
    pwm_main();
    return 0;
}

#endif // __GCC__