/****************************************************************************

Copyright(c) 2019 by Aerospace C.Power (Chongqing) Microelectronics. ALL RIGHTS RESERVED.

This Information is proprietary to Aerospace C.Power (Chongqing) Microelectronics and MAY NOT
be copied by any method or incorporated into another program without
the express written consent of Aerospace C.Power. This Information or any portion
thereof remains the property of Aerospace C.Power. The Information contained herein
is believed to be accurate and Aerospace C.Power assumes no responsibility or
liability for its use in any way and conveys no license or title under
any patent or copyright and makes no representation or warranty that this
Information is free from patent or copyright infringement.

****************************************************************************/

#ifndef __ATE_MAIN_H
#define __ATE_MAIN_H

#include "os_types.h"

#pragma pack(push)  /* save the pack status */
#pragma pack(1)     /* 1 byte align */

/* case branch */
// 6: ana&&flash 1:efuse
#define ATE_TEST_CASE_ID                (6)
#define ATE_DEBUG_LEVEL                 (0)
#define ATE_FUSE_INFO_EN                (0)

/* ATE software version */
#define ATE_SW_VER              ("SW_V0.1_20190215")

#define REG8(a)                 (*((volatile uint8_t *)(a)))
#define REG32(a)                (*((volatile uint32_t *)(a)))

#define ERR_BIT(a)              (0x00000001<<(a)) // | 0x00000002)

typedef enum _iot_ftm_result {
    ATE_TEST_OK     = 0x01,
    ATE_TEST_FAIL   = 0xFF,
} iot_ftm_result_t;

typedef enum _iot_ate_flags {
    ATE_FLAG_OK = 0x0,          // TEST OK
    ATE_DDR_FAIL_FREQ = 0x1,    // swtich cpu freqence failed
    ATE_DDR_FAIL_INIT = 0x2,    // ddr training failed
    ATE_DDR_FAIL_BOND = 0x3,    // ddr bond test
    ATE_FLASH_FAIL_BOND = 0x4,  // flash bond test
    ATE_FLASH_FAIL_ID   = 0x5,  // flash id failed
    ATE_FLASH_FAIL_INIT = 0x6,  // flash init failed
    ATE_FLASH_FAIL_QUAD = 0x7,  // flash quad mode failed
    ATE_FLASH_FAIL_ERASE = 0x8, // flash erase failed
    ATE_FLASH_FAIL_PRGM = 0x9,  // flash program failed
    ATE_FLASH_FAIL_READ = 0x10, // flash read failed
} iot_ate_flags;

/* ate total info structure:512byte start from 0xfff8000 */
typedef struct _ate_info {
    uint32_t    result;
    uint32_t    flags;
    uint32_t    cnt;
    uint8_t     sw_version[22];
    uint8_t     mac[6];
    uint32_t    chip_id;
} ate_info_t;

#pragma pack(pop)   /* restore the pack status */

#endif // !__ATE_MAIN_H