adapter_khz     10000

source [find interface/ftdi/olimex-arm-usb-tiny-h.cfg]

set _CHIPNAME riscv
jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x10e31913

set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME riscv -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
$_TARGETNAME configure -rtos auto

#flash bank onboard_spi_flash fespi 0x20000000 0 0 0 $_TARGETNAME
init
if {[ info exists pulse_srst]} {
  ftdi_set_signal nSRST 0
  ftdi_set_signal nSRST z
  #Wait for the reset stretcher
  #It will work without this, but
  #will incur lots of delays for later commands.
  sleep 1500
}
halt
#flash protect 0 64 last off