/* os shim includes */
#include "os_types.h"

#include "dbg_io.h"
#include "iot_io.h"
#include "pwm.h"
#include "iot_pwm_api.h"
#include "clk.h"

#include "pwm_hw.h"

void clk_core_freq_75m_set();
void clk_core_freq_25m_set();
int clk_core_freq_set(uint32_t freq);


void reg_dump(uint32_t baseaddr, uint32_t offset)
{
    uint32_t temp, index;
    for(index = 0; index < offset; index += 4) {
        if((index % 16) == 0) {
            iot_printf("\n");
        }
        iot_printf("%08x ",*(int *)(baseaddr + index));
        temp = 100000;
        while(temp--);
    }
    iot_printf("\n");
}
extern int pwm_dead_band_config(uint8_t ch, uint32_t rising_db, uint32_t falling_db,
                       uint32_t *rising_actual, uint32_t *falling_actual);

extern void pwm_fault_config(uint8_t ch, uint8_t gpio, uint8_t h_state,
                       uint8_t l_state,pwm_isr cb);
extern int clk_pwm_div_motor_set(uint8_t div);
extern int pwm_set_clk(uint8_t clk_src);
uint32_t pwm_falut_cb(void)
{
    iot_printf("fault\r\n");
    return 0;
}

void kl2_pwm_test_delay(int n)
{

    volatile uint32_t a, b;
    for(a = 0; a < n ; a ++) {
        for(b = 0; b < 100; b++);
    }
}

void pwm_main(void)
{
    volatile uint32_t delay = 0;
    uint8_t duty = 50;
    uint8_t ch = PWM_CHANNEL_1;
    uint8_t test_for_single_mode = 0;
    uint32_t clk_freq = 0;
    uint32_t a_r=0, a_f=0;

    dbg_uart_init();
    iot_pwm_gpio_config(ch, 38, 40);

    if (test_for_single_mode) {
        iot_pwm_single_mode_init(ch);
        clk_freq = pwm_get_ch_clk(ch);
        /* set period 1ms. if not set will use default period 1s. */
        iot_pwm_set_period(ch, clk_freq / 1000);
        iot_pwm_set_duty(ch, duty * 100);
        while (1) {
            iot_pwm_start_for_single(ch);
            iot_printf("pwm single mode running...\n");
            delay = 100000;
            while(delay--);
       }
    } else {
        clk_core_freq_set(CPU_FREQ_25M);
        iot_pwm_hw_init(ch);
        clk_freq = pwm_get_ch_clk(ch);
        /* set period 1ms. if not set will use default period 1s. */
        iot_pwm_set_period(ch, 1000);
        iot_pwm_start(ch);

        iot_printf("clk_freq=%d\r\n", clk_freq);

        if(pwm_dead_band_config(ch, 250, 350, &a_r, &a_f) < 0) {
            iot_printf("dead_band_set err\r\n");
        }
        iot_printf("dead_band_set a_r=%d, a_f=%d\r\n", a_r, a_f);



        //pwm_fault_config(ch, 39, 0, 0, pwm_falut_cb);

        if (pwm_set_clk(IOT_PWM_CLK_SRC_2M5) < 0) {
            iot_printf("set err %d\r\n", __LINE__);
        }
        iot_pwm_set_duty(ch, duty * 100);
        kl2_pwm_test_delay(10000);

        if (pwm_set_clk(IOT_PWM_CLK_SRC_25M) < 0) {
            iot_printf("set err %d\r\n", __LINE__);
        }
        iot_pwm_set_duty(ch, duty * 100);
        kl2_pwm_test_delay(10000);

        if (pwm_set_clk(IOT_PWM_CLK_SRC_50M) < 0) {
            iot_printf("set err %d\r\n", __LINE__);
        }
        iot_pwm_set_duty(ch, duty * 100);
        kl2_pwm_test_delay(10000);

        if (pwm_set_clk(IOT_PWM_CLK_SRC_75M) < 0) {
            iot_printf("set err %d\r\n", __LINE__);
        }
        iot_pwm_set_duty(ch, duty * 100);
        kl2_pwm_test_delay(10000);

        if (pwm_set_clk(IOT_PWM_CLK_SRC_100M) < 0) {
            iot_printf("set err %d\r\n", __LINE__);
        }
        iot_pwm_set_duty(ch, duty * 100);
        kl2_pwm_test_delay(10000);


        while(1);
        while(1) {
            for (duty = 0; duty <= 100; duty += 5) {
                iot_pwm_set_duty(ch, duty * 100);
                iot_printf("PWM Duty: %d%%\r\n",duty);
                delay = 10000000;
                while (delay--);
            }

            for (duty = 100; duty > 0; duty -= 5) {
                iot_pwm_set_duty(ch, duty * 100);
                iot_printf("PWM Duty: %d%%\r\n",duty);
                delay = 10000000;
                while (delay--);
            }
        }
    }
}

#ifdef __GNUC__

int main(void)
{
    pwm_main();

    return 0;
}
#endif // __GCC__