andy/kunlun
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
65a3e96af9a1828f0f33867bed1351ecb9471213
kunlun/driver/inc/sfc.h
andy c756587541 初始提交
2024-09-28 14:24:04 +08:00

346 lines
11 KiB
C
Raw Blame History

/****************************************************************************
Copyright(c) 2019 by Aerospace C.Power (Chongqing) Microelectronics. ALL RIGHTS RESERVED.
This Information is proprietary to Aerospace C.Power (Chongqing) Microelectronics and MAY NOT
be copied by any method or incorporated into another program without
the express written consent of Aerospace C.Power. This Information or any portion
thereof remains the property of Aerospace C.Power. The Information contained herein
is believed to be accurate and Aerospace C.Power assumes no responsibility or
liability for its use in any way and conveys no license or title under
any patent or copyright and makes no representation or warranty that this
Information is free from patent or copyright infringement.
****************************************************************************/
#ifndef __SFC_H
#define __SFC_H
#ifdef __cplusplus
extern "C" {
#endif
#define SPI_FLASH_GD25Q80C 0
#define SPI_FLASH_GD25LQ80C 1
#define SPI_FLASH_P25Q80H 2
#define SPI_FLASH_P25Q80L 3
#define SFC_DEFUALT_FLASH SPI_FLASH_GD25Q80C
#define SFC_MAX_SUPPORT_DEV 4
/* write en(0x06) or write dis(0x04) */
#define WRITE_EN_CMD_MODE 0x200
#define WRITE_EN_CMD_CYCLE 0x08000000
#define WRITE_DIS_CMD_MODE 0x200
#define WRITE_DIS_CMD_CYCLE 0x08000000
/* 0x50 */
#define VOLATILE_SR_WR_EN_CMD_MODE 0x200
#define VOLATILE_SR_WR_EN_CMD_CYCLE 0x08000000
/* read status reg1 (0x35) reg2(0x15) reg3(0x15) */
#define READ_STS_REG_CMD_MODE 0x100
#define READ_STS_REG_CMD_CYCLE 0x08000000
/* write status reg1(0x01) reg2(0x31) reg3(0x11) */
#define WRITE_STS_REG_CMD_MODE 0x200
#define WRITE_STS_REG_CMD_CYCLE 0x08000000
/* read data */
/* read(0x03) */
#define READ_DATA_CMD_MODE 0x100
#define READ_DATA_CMD_CYCLE 0x08180000
/* fast read(0x0B) */
#define FAST_READ_CMD_MODE 0x100
#define FAST_READ_CMD_CYCLE 0x08180008
/* dual output fast read(0x3B) */
#define DUAL_OUTPUT_FAST_RD_CMD_MODE 0x102
#define DUAL_OUTPUT_FAST_RD_CMD_CYCLE 0x08180008
/* dual io fast read(0xBB) */
#define DUAL_IO_FAST_RD_CMD_MODE 0x12a
#define DUAL_IO_FAST_RD_CMD_CYCLE 0x080c0400
/* quad output fast read(0x6B) */
#define QUAD_OUTPUT_FAST_RD_CMD_MODE 0x101
#define QUAD_OUTPUT_FAST_RD_CMD_CYCLE 0x08180008
/* quad output fast read(0xEB) */
#define QUAD_IO_FAST_RD_CMD_MODE 0x115
#define QUAD_IO_FAST_RD_CMD_CYCLE 0x08060204
/* page program (0x02) quad page program(0x32) */
#define PAGE_PROGRAM_CMD_MODE 0x200
#define PAGE_PROGRAM_CMD_CYCLE 0x08180000
#define QUAD_PAGE_PROGRAM_CMD_MODE 0x201
#define QUAD_PAGE_PROGRAM_CMD_CYCLE 0x08180000
/* erase page(0x81 only puyan) sector(0x20) block_64k(0xD8) chip(0xC7) */
#define SECTOR_ERASE_CMD_MODE 0x200
#define SECTOR_ERASE_CMD_CYCLE 0x08180000
//#define BLOCK_ERASE_32K_CMD_MODE 0x200
//#define BLOCK_ERASE_32K_CMD_CYCLE 0x08180000
#define BLOCK_ERASE_64K_CMD_MODE 0x200
#define BLOCK_ERASE_64K_CMD_CYCLE 0x08180000
#define CHIP_ERASE_CMD_MODE 0x200
#define CHIP_ERASE_CMD_CYCLE 0x08000000
/* rst_en(0x66) && rst(0x99) */
#define RESET_EN_CMD_MODE 0x200
#define RESET_EN_CMD_CYCLE 0x08000000
#define RESET_CMD_MODE 0x200
#define RESET_CMD_CYCLE 0x08000000
/* suspend(0x75) && resume(0x7A) */
#define PE_SUSPEND_CMD_MODE 0x200
#define PE_SUSPEND_CMD_CYCLE 0x08000000
#define PE_RESUME_CMD_MODE 0x200
#define PE_RESUME_CMD_CYCLE 0x08000000
/* Manufacture ID && Device ID (0x90 0x92 0x94) */
#define MANU_DEV_ID_CMD_MODE 0x100
#define MANU_DEV_ID_CMD_CYCLE 0x08180000
#define MANU_DEV_ID_DUAL_IO_CMD_MODE 0x12a
#define MANU_DEV_ID_DUAL_IO_CMD_CYCLE 0x080c0400
#define MANU_DEV_ID_QUAD_IO_CMD_MODE 0x115
#define MANU_DEV_ID_QUAD_IO_CMD_CYCLE 0x08060204
/* Read Identification((0x9F)) */
#define READ_ID_CMD_MODE 0x100
#define READ_ID_CMD_CYCLE 0x08000000
/* sfdp(0x5A) */
#define READ_SFDP_CMD_MODE 0x100
#define READ_SFDP_CMD_CYCLE 0x08180008
/* unique id(0x4B) */
#define READ_UNIQ_ID_CMD_MODE 0x100
#define READ_UNIQ_ID_CMD_CYCLE 0x08180008
#define TEST_MODE_CMD_MODE 0x100
#define TEST_MODE_CMD_CYCLE 0x08000000
#define PROGRAM_OTP_CMD 0x42
#define ERASE_OTP_CMD 0x44
#define READ_OTP_CMD 0x48
#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE ((uint32_t)5000U)/* 5 s */
#define ADDR_MAPPING_SIZE_64K (1024 * 64)
#define ADDR_MAPPING_SIZE_128K (1024 * 128)
#define SFC_POWER_VOL_1P8V 0
#define SFC_POWER_VOL_3P3V 1
#define SFC_MAP_VALUE_INIT 0x03020100
#define SFC_MAP_VALUE_EX 0x0a090100
#define FLASH_VENDOR_ID_GD 0xc8
#define FLASH_VENDOR_ID_PUYA 0x85
#define FLASH_VENDOR_ID_ZBIT 0x5e
#define FLASH_VENDOR_ID_WINBOND 0xef
#define FLASH_SIZE_1MB 0x13
#define FLASH_SIZE_2MB 0x14
#define FLASH_SIZE_4MB 0x15
#define FLASH_SIZE_8MB 0x16
#define FLASH_SIZE_16MB 0x17
#define FLASH_SIZE_MAX 0x18
#define SFC_CHIP_UID_LEN_MAX 16
#define STS_LB1_BIT_S11 0x08
#define STS_LB2_BIT_S12 0x10
#define STS_LB3_BIT_S13 0x20
typedef enum {
MOD_SFC_PROG_WTIME = 0x00U,
MOD_SFC_ERASE_WTIME = 0x01U,
} sfc_pe_type_t;
typedef enum {
MOD_SFC_AMAP_64K = 0x00U,
MOD_SFC_AMAP_128K = 0x01U,
} sfc_addr_map_type_t;
typedef enum {
QSPI_OK = 0x00U,
QSPI_ERROR = 0x01U,
QSPI_BUSY = 0x02U,
QSPI_TIMEOUT = 0x03U,
QSPI_NOT_SUPPORTED = 0x04U
} sfc_sts_type_t;
typedef enum {
MOD_SFC_OP_PRM = 0x00U,
MOD_SFC_OP_ERASE = 0x01U,
MOD_SFC_OP_TRANS = 0x02U,
MOD_SFC_OP_REG_WR = 0x03U
} sfc_operation_mode_t;
typedef enum {
MOD_SFC_PROG_MIN = 0x00U,
MOD_SFC_PROG_STAND = 0x00U,
MOD_SFC_PROG_QUAD = 0x01U,
MOD_SFC_PROG_FAST = 0x02U,
MOD_SFC_PROG_MAX,
} sfc_page_prog_mode_t;
typedef enum {
MOD_SFC_SERIAL = 0x00U,
MOD_SFC_DUAL = 0x01U,
MOD_SFC_QUAD = 0x02U
} sfc_spi_mode_t;
typedef enum {
SFC_REG_ACCESS = 0x00U,
SFC_BUF_ACCESS = 0x01U
} sfc_access_type_t;
typedef enum {
SFC_READ_MIN = 0x00U,
SFC_READ_BYTE = 0x00U,
SFC_READ_HIGH_SPD = 0x01U,
SFC_READ_DUAL_FAST = 0x02U,
SFC_READ_QUAD_FAST = 0x03U,
SFC_READ_DUAL_IO_FAST = 0x04U,
SFC_READ_QUAD_IO_FAST = 0x05U,
SFC_READ_QUAD_IO_WORD_FAST = 0x06U,
SFC_READ_MAX,
} sfc_read_mode_t;
typedef enum {
SFC_ENDIAN_BIG = 0,
SFC_ENDIAN_LITTLE,
} sfc_endian_mode_t;
typedef enum {
MOD_SW_MODE_DIS = 0x00U,
MOD_SW_MODE_ENA = 0x01U,
} flash_sw_mode_t;
typedef enum _qe_cfg_mode {
QE_CFG_REG_01H = 0, /* command sequence: 01h+2bytes register value */
QE_CFG_REG_31H = 1, /* command sequence: 31h+1byte register value */
} qe_cfg_mode_t;
/**
* @brief flash otp region id.
*
*/
typedef enum {
FLASH_OTP_REGION0,
FLASH_OTP_REGION1,
FLASH_OTP_REGION2,
IOT_FLASH_OTP_REGION_MAX,
} FLASH_OTP_REGION_ID;
typedef struct sfc_cmd {
uint8_t cmd;
uint32_t addr;
uint8_t op_mode;
uint32_t swm_mode;
uint32_t swm_cycle;
uint32_t wtime;
} sfc_cmd_t;
typedef struct _flash_dev_info {
uint8_t dev_id;
uint8_t size;
uint8_t qe_cfg_mode;
} flash_dev_info_t;
typedef struct
{
uint8_t sfc_cmode; /* Operation Mode */
uint8_t sfc_mode; /* spi continus mode byte */
uint8_t cache_rd_mode; /* read mode */
uint8_t cmd; /* Specifies the Instruction to be sent */
uint32_t sfc_dlen; /* spi trans data length, unit is byte */
uint32_t addr; /* Specifies the Address to be sent */
uint32_t pe_wait_time; /* program or erase wait time,
unit is clock cycle num */
uint32_t sfc_rd_sts; /* status */
uint32_t sfc_wr_sts; /* status */
} sfc_op_t;
typedef struct _sfc_ctrl {
int is_quad;
int is_use_sus_resume;
int (*erase_page)(uint32_t page_addr, uint8_t sw_mode);
int (*erase_block)(uint32_t block_addr, uint8_t sw_mode);
int (*erase_sector)(uint32_t sector_addr, uint8_t sw_mode);
int (*erase_chip)(void);
int (*get_dev_id)(uint8_t *data);
int (*get_chip_id)(uint8_t *p_uid, uint32_t dlen);
int (*get_sts_reg)(uint8_t *data, uint8_t reg_num);
int (*set_quad_mode)(uint8_t qe_cfg_mode);
int (*cache_mode_cfg)(uint8_t cache_mode);
int (*addr_mapping)(uint32_t offset1, uint32_t offset2, uint32_t size);
int (*mapping_sts)();
int (*query_wip_sts)(uint8_t *wip);
int (*read)(uint8_t *data, uint32_t raddr, uint32_t size, uint8_t mode);
int (*write)(uint8_t *data, uint32_t waddr, uint32_t size,
uint8_t quad, uint8_t sw_mode);
int (*suspend_resume_ena)(void);
int (*read_otp)(uint8_t *data, uint32_t raddr, uint32_t size);
int (*write_otp)(uint8_t *data, uint32_t waddr,uint32_t size);
int (*erase_otp)(uint32_t addr);
void (*lock_otp)(FLASH_OTP_REGION_ID id);
int (*init)(void);
flash_dev_info_t *device_info;
} sfc_ctrl_t;
uint8_t hal_qspi_read_reg(uint8_t cmd);
uint8_t hal_qspi_write_reg(uint8_t cmd, uint32_t data, uint8_t len);
sfc_sts_type_t qspi_set_edge(uint8_t rx, uint8_t tx, uint8_t div);
sfc_sts_type_t qspi_cmd_swm_sel(uint32_t mode, uint32_t cycle);
sfc_sts_type_t qspi_cmd_cache_sel(uint8_t cmd);
sfc_sts_type_t qspi_cmd_wip_sel(uint8_t cmd);
sfc_sts_type_t qspi_cmd_resume_sel(uint8_t cmd);
sfc_sts_type_t sfc_pe_suspend();
sfc_sts_type_t sfc_pe_resume();
sfc_sts_type_t sfc_write_en(void);
sfc_sts_type_t sfc_write_disable(void);
sfc_sts_type_t sfc_write_en_volatile();
sfc_sts_type_t sfc_rst_ena_and_rst();
sfc_sts_type_t sfc_qspi_get_id_mult(uint8_t *data, uint8_t mode);
sfc_sts_type_t sfc_read_sfdp(uint8_t *data, uint32_t raddr, uint32_t size);
int sfc_query_wip_sts(uint8_t *wip);
int sfc_get_dev_id(uint8_t *data);
void sfc_clk_div_set(uint8_t div);
uint8_t sfc_clk_div_get();
sfc_sts_type_t hal_qspi_cfg_sfc_clk_out(int enable);
void sfc_set_edge(uint8_t rx, uint8_t tx);
void sfc_set_endian_mode(sfc_endian_mode_t endian);
void sfc_set_suspend_resume_param(void);
uint32_t sfc_get_pe_mode();
int sfc_enter_test_mode();
int sfc_test_mode_write(uint8_t *data, uint32_t waddr,uint32_t size);
void sfc_set_io_map(uint32_t map);
int sfc_read(uint8_t *data, uint32_t raddr, uint32_t size, uint8_t mode);
#define SFC_PARAM_CHECK(a) \
if (!(a)) { \
return -1; \
} \
#ifdef __cplusplus
}
#endif
#endif
Reference in New Issue View Git Blame Copy Permalink