初始提交
This commit is contained in:
557
Project/Src/Drive/Source/spi_flash.c
Normal file
557
Project/Src/Drive/Source/spi_flash.c
Normal file
@@ -0,0 +1,557 @@
|
||||
/***
|
||||
************************************************************************************
|
||||
* @file spi_flash.c
|
||||
* @version V1.0.0
|
||||
* @brief SPI Flash相关函数
|
||||
************************************************************************************
|
||||
* @description
|
||||
*
|
||||
* 移植于官方标准固件库的例程
|
||||
*
|
||||
************************************************************************************
|
||||
***/
|
||||
#include "spi_flash.h"
|
||||
|
||||
|
||||
void sFLASH_LowLevel_DeInit(void);
|
||||
void sFLASH_LowLevel_Init(void);
|
||||
|
||||
|
||||
|
||||
//定义一个所有权，保证FLASH只有一个线程使用
|
||||
//static int g_used=0;
|
||||
//定义在外部的延时函数
|
||||
//extern void my_delay_ms(u32 ms);
|
||||
|
||||
|
||||
//定义进入不可重入区的宏
|
||||
//#define sFLASH_ENTER_USED() {while (g_used) {my_delay_ms(1);} g_used=1;}
|
||||
//#define sFLASH_EXIT_USED() {g_used=0;}
|
||||
#define sFLASH_ENTER_USED() { }
|
||||
#define sFLASH_EXIT_USED() { }
|
||||
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @brief DeInitializes the peripherals used by the SPI FLASH driver.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void sFLASH_DeInit(void)
|
||||
{
|
||||
sFLASH_LowLevel_DeInit();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Initializes the peripherals used by the SPI FLASH driver.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void sFLASH_Init(void)
|
||||
{
|
||||
SPI_InitTypeDef SPI_InitStructure;
|
||||
|
||||
sFLASH_LowLevel_Init();
|
||||
|
||||
/*!< Deselect the FLASH: Chip Select high */
|
||||
sFLASH_CS_HIGH();
|
||||
|
||||
/*!< SPI configuration */
|
||||
SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
|
||||
SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
|
||||
SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
|
||||
SPI_InitStructure.SPI_CPOL = SPI_CPOL_High;
|
||||
SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge;
|
||||
SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
|
||||
SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2;
|
||||
|
||||
SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
|
||||
SPI_InitStructure.SPI_CRCPolynomial = 7;
|
||||
SPI_Init(sFLASH_SPI, &SPI_InitStructure);
|
||||
|
||||
/*!< Enable the sFLASH_SPI */
|
||||
SPI_Cmd(sFLASH_SPI, ENABLE);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Erases the specified FLASH sector.
|
||||
* @param SectorAddr: address of the sector to erase.
|
||||
* @retval None
|
||||
*/
|
||||
void sFLASH_EraseSector(uint32_t SectorAddr)
|
||||
{
|
||||
|
||||
sFLASH_ENTER_USED();
|
||||
|
||||
|
||||
/*!< Send write enable instruction */
|
||||
sFLASH_WriteEnable();
|
||||
|
||||
/*!< Sector Erase */
|
||||
/*!< Select the FLASH: Chip Select low */
|
||||
sFLASH_CS_LOW();
|
||||
/*!< Send Sector Erase instruction */
|
||||
sFLASH_SendByte(sFLASH_CMD_SE);
|
||||
/*!< Send SectorAddr high nibble address byte */
|
||||
sFLASH_SendByte((SectorAddr & 0xFF0000) >> 16);
|
||||
/*!< Send SectorAddr medium nibble address byte */
|
||||
sFLASH_SendByte((SectorAddr & 0xFF00) >> 8);
|
||||
/*!< Send SectorAddr low nibble address byte */
|
||||
sFLASH_SendByte(SectorAddr & 0xFF);
|
||||
/*!< Deselect the FLASH: Chip Select high */
|
||||
sFLASH_CS_HIGH();
|
||||
|
||||
/*!< Wait the end of Flash writing */
|
||||
sFLASH_WaitForWriteEnd();
|
||||
|
||||
sFLASH_EXIT_USED()
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Erases the entire FLASH.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void sFLASH_EraseBulk(void)
|
||||
{
|
||||
/*!< Send write enable instruction */
|
||||
sFLASH_WriteEnable();
|
||||
|
||||
/*!< Bulk Erase */
|
||||
/*!< Select the FLASH: Chip Select low */
|
||||
sFLASH_CS_LOW();
|
||||
/*!< Send Bulk Erase instruction */
|
||||
//sFLASH_SendByte(sFLASH_CMD_BE);
|
||||
sFLASH_SendByte(0xc7);//改为全片擦除
|
||||
/*!< Deselect the FLASH: Chip Select high */
|
||||
sFLASH_CS_HIGH();
|
||||
|
||||
/*!< Wait the end of Flash writing */
|
||||
sFLASH_WaitForWriteEnd();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Writes more than one byte to the FLASH with a single WRITE cycle
|
||||
* (Page WRITE sequence).
|
||||
* @note The number of byte can't exceed the FLASH page size.
|
||||
* @param pBuffer: pointer to the buffer containing the data to be written
|
||||
* to the FLASH.
|
||||
* @param WriteAddr: FLASH's internal address to write to.
|
||||
* @param NumByteToWrite: number of bytes to write to the FLASH, must be equal
|
||||
* or less than "sFLASH_PAGESIZE" value.
|
||||
* @retval None
|
||||
*/
|
||||
void sFLASH_WritePage(uint8_t* pBuffer, uint32_t WriteAddr, uint16_t NumByteToWrite)
|
||||
{
|
||||
/*!< Enable the write access to the FLASH */
|
||||
sFLASH_WriteEnable();
|
||||
|
||||
/*!< Select the FLASH: Chip Select low */
|
||||
sFLASH_CS_LOW();
|
||||
/*!< Send "Write to Memory " instruction */
|
||||
sFLASH_SendByte(sFLASH_CMD_WRITE);
|
||||
/*!< Send WriteAddr high nibble address byte to write to */
|
||||
sFLASH_SendByte((WriteAddr & 0xFF0000) >> 16);
|
||||
/*!< Send WriteAddr medium nibble address byte to write to */
|
||||
sFLASH_SendByte((WriteAddr & 0xFF00) >> 8);
|
||||
/*!< Send WriteAddr low nibble address byte to write to */
|
||||
sFLASH_SendByte(WriteAddr & 0xFF);
|
||||
|
||||
/*!< while there is data to be written on the FLASH */
|
||||
while (NumByteToWrite--)
|
||||
{
|
||||
/*!< Send the current byte */
|
||||
sFLASH_SendByte(*pBuffer);
|
||||
/*!< Point on the next byte to be written */
|
||||
pBuffer++;
|
||||
}
|
||||
|
||||
/*!< Deselect the FLASH: Chip Select high */
|
||||
sFLASH_CS_HIGH();
|
||||
|
||||
/*!< Wait the end of Flash writing */
|
||||
sFLASH_WaitForWriteEnd();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Writes block of data to the FLASH. In this function, the number of
|
||||
* WRITE cycles are reduced, using Page WRITE sequence.
|
||||
* @param pBuffer: pointer to the buffer containing the data to be written
|
||||
* to the FLASH.
|
||||
* @param WriteAddr: FLASH's internal address to write to.
|
||||
* @param NumByteToWrite: number of bytes to write to the FLASH.
|
||||
* @retval None
|
||||
*/
|
||||
void sFLASH_WriteBuffer(uint8_t* pBuffer, uint32_t WriteAddr, uint32_t NumByteToWrite)
|
||||
{
|
||||
sFLASH_ENTER_USED();
|
||||
|
||||
|
||||
uint8_t NumOfPage = 0, NumOfSingle = 0, Addr = 0, count = 0, temp = 0;
|
||||
|
||||
Addr = WriteAddr % sFLASH_SPI_PAGESIZE;
|
||||
count = sFLASH_SPI_PAGESIZE - Addr;
|
||||
NumOfPage = NumByteToWrite / sFLASH_SPI_PAGESIZE;
|
||||
NumOfSingle = NumByteToWrite % sFLASH_SPI_PAGESIZE;
|
||||
|
||||
if (Addr == 0) /*!< WriteAddr is sFLASH_PAGESIZE aligned */
|
||||
{
|
||||
if (NumOfPage == 0) /*!< NumByteToWrite < sFLASH_PAGESIZE */
|
||||
{
|
||||
sFLASH_WritePage(pBuffer, WriteAddr, NumByteToWrite);
|
||||
}
|
||||
else /*!< NumByteToWrite > sFLASH_PAGESIZE */
|
||||
{
|
||||
while (NumOfPage--)
|
||||
{
|
||||
sFLASH_WritePage(pBuffer, WriteAddr, sFLASH_SPI_PAGESIZE);
|
||||
WriteAddr += sFLASH_SPI_PAGESIZE;
|
||||
pBuffer += sFLASH_SPI_PAGESIZE;
|
||||
}
|
||||
|
||||
sFLASH_WritePage(pBuffer, WriteAddr, NumOfSingle);
|
||||
}
|
||||
}
|
||||
else /*!< WriteAddr is not sFLASH_PAGESIZE aligned */
|
||||
{
|
||||
if (NumOfPage == 0) /*!< NumByteToWrite < sFLASH_PAGESIZE */
|
||||
{
|
||||
if (NumOfSingle > count) /*!< (NumByteToWrite + WriteAddr) > sFLASH_PAGESIZE */
|
||||
{
|
||||
temp = NumOfSingle - count;
|
||||
|
||||
sFLASH_WritePage(pBuffer, WriteAddr, count);
|
||||
WriteAddr += count;
|
||||
pBuffer += count;
|
||||
|
||||
sFLASH_WritePage(pBuffer, WriteAddr, temp);
|
||||
}
|
||||
else
|
||||
{
|
||||
sFLASH_WritePage(pBuffer, WriteAddr, NumByteToWrite);
|
||||
}
|
||||
}
|
||||
else /*!< NumByteToWrite > sFLASH_PAGESIZE */
|
||||
{
|
||||
NumByteToWrite -= count;
|
||||
NumOfPage = NumByteToWrite / sFLASH_SPI_PAGESIZE;
|
||||
NumOfSingle = NumByteToWrite % sFLASH_SPI_PAGESIZE;
|
||||
|
||||
sFLASH_WritePage(pBuffer, WriteAddr, count);
|
||||
WriteAddr += count;
|
||||
pBuffer += count;
|
||||
|
||||
while (NumOfPage--)
|
||||
{
|
||||
sFLASH_WritePage(pBuffer, WriteAddr, sFLASH_SPI_PAGESIZE);
|
||||
WriteAddr += sFLASH_SPI_PAGESIZE;
|
||||
pBuffer += sFLASH_SPI_PAGESIZE;
|
||||
}
|
||||
|
||||
if (NumOfSingle != 0)
|
||||
{
|
||||
sFLASH_WritePage(pBuffer, WriteAddr, NumOfSingle);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
//使用这个变量来防止重入
|
||||
sFLASH_EXIT_USED();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Reads a block of data from the FLASH.
|
||||
* @param pBuffer: pointer to the buffer that receives the data read from the FLASH.
|
||||
* @param ReadAddr: FLASH's internal address to read from.
|
||||
* @param NumByteToRead: number of bytes to read from the FLASH.
|
||||
* @retval None
|
||||
*/
|
||||
void sFLASH_ReadBuffer(uint8_t* pBuffer, uint32_t ReadAddr, uint32_t NumByteToRead)
|
||||
{
|
||||
|
||||
//使用这个变量防止重入
|
||||
sFLASH_ENTER_USED();
|
||||
|
||||
|
||||
/*!< Select the FLASH: Chip Select low */
|
||||
sFLASH_CS_LOW();
|
||||
|
||||
/*!< Send "Read from Memory " instruction */
|
||||
sFLASH_SendByte(sFLASH_CMD_READ);
|
||||
|
||||
/*!< Send ReadAddr high nibble address byte to read from */
|
||||
sFLASH_SendByte((ReadAddr & 0xFF0000) >> 16);
|
||||
/*!< Send ReadAddr medium nibble address byte to read from */
|
||||
sFLASH_SendByte((ReadAddr& 0xFF00) >> 8);
|
||||
/*!< Send ReadAddr low nibble address byte to read from */
|
||||
sFLASH_SendByte(ReadAddr & 0xFF);
|
||||
|
||||
while (NumByteToRead--) /*!< while there is data to be read */
|
||||
{
|
||||
/*!< Read a byte from the FLASH */
|
||||
*pBuffer = sFLASH_SendByte(sFLASH_DUMMY_BYTE);
|
||||
/*!< Point to the next location where the byte read will be saved */
|
||||
pBuffer++;
|
||||
}
|
||||
|
||||
/*!< Deselect the FLASH: Chip Select high */
|
||||
sFLASH_CS_HIGH();
|
||||
|
||||
//使用这个变量来防止重入
|
||||
sFLASH_EXIT_USED();
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Reads FLASH identification.
|
||||
* @param None
|
||||
* @retval FLASH identification
|
||||
*/
|
||||
uint32_t sFLASH_ReadID(void)
|
||||
{
|
||||
uint32_t Temp = 0, Temp0 = 0, Temp1 = 0, Temp2 = 0;
|
||||
|
||||
/*!< Select the FLASH: Chip Select low */
|
||||
sFLASH_CS_LOW();
|
||||
|
||||
/*!< Send "RDID " instruction */
|
||||
sFLASH_SendByte(0x9F);
|
||||
|
||||
/*!< Read a byte from the FLASH */
|
||||
Temp0 = sFLASH_SendByte(sFLASH_DUMMY_BYTE);
|
||||
|
||||
/*!< Read a byte from the FLASH */
|
||||
Temp1 = sFLASH_SendByte(sFLASH_DUMMY_BYTE);
|
||||
|
||||
/*!< Read a byte from the FLASH */
|
||||
Temp2 = sFLASH_SendByte(sFLASH_DUMMY_BYTE);
|
||||
|
||||
/*!< Deselect the FLASH: Chip Select high */
|
||||
sFLASH_CS_HIGH();
|
||||
|
||||
Temp = (Temp0 << 16) | (Temp1 << 8) | Temp2;
|
||||
|
||||
return Temp;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Initiates a read data byte (READ) sequence from the Flash.
|
||||
* This is done by driving the /CS line low to select the device, then the READ
|
||||
* instruction is transmitted followed by 3 bytes address. This function exit
|
||||
* and keep the /CS line low, so the Flash still being selected. With this
|
||||
* technique the whole content of the Flash is read with a single READ instruction.
|
||||
* @param ReadAddr: FLASH's internal address to read from.
|
||||
* @retval None
|
||||
*/
|
||||
void sFLASH_StartReadSequence(uint32_t ReadAddr)
|
||||
{
|
||||
/*!< Select the FLASH: Chip Select low */
|
||||
sFLASH_CS_LOW();
|
||||
|
||||
/*!< Send "Read from Memory " instruction */
|
||||
sFLASH_SendByte(sFLASH_CMD_READ);
|
||||
|
||||
/*!< Send the 24-bit address of the address to read from -------------------*/
|
||||
/*!< Send ReadAddr high nibble address byte */
|
||||
sFLASH_SendByte((ReadAddr & 0xFF0000) >> 16);
|
||||
/*!< Send ReadAddr medium nibble address byte */
|
||||
sFLASH_SendByte((ReadAddr& 0xFF00) >> 8);
|
||||
/*!< Send ReadAddr low nibble address byte */
|
||||
sFLASH_SendByte(ReadAddr & 0xFF);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Reads a byte from the SPI Flash.
|
||||
* @note This function must be used only if the Start_Read_Sequence function
|
||||
* has been previously called.
|
||||
* @param None
|
||||
* @retval Byte Read from the SPI Flash.
|
||||
*/
|
||||
uint8_t sFLASH_ReadByte(void)
|
||||
{
|
||||
return (sFLASH_SendByte(sFLASH_DUMMY_BYTE));
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Sends a byte through the SPI interface and return the byte received
|
||||
* from the SPI bus.
|
||||
* @param byte: byte to send.
|
||||
* @retval The value of the received byte.
|
||||
*/
|
||||
uint8_t sFLASH_SendByte(uint8_t byte)
|
||||
{
|
||||
/*!< Loop while DR register in not empty */
|
||||
while (SPI_I2S_GetFlagStatus(sFLASH_SPI, SPI_I2S_FLAG_TXE) == RESET);
|
||||
|
||||
/*!< Send byte through the SPI1 peripheral */
|
||||
SPI_I2S_SendData(sFLASH_SPI, byte);
|
||||
|
||||
/*!< Wait to receive a byte */
|
||||
while (SPI_I2S_GetFlagStatus(sFLASH_SPI, SPI_I2S_FLAG_RXNE) == RESET);
|
||||
|
||||
/*!< Return the byte read from the SPI bus */
|
||||
return SPI_I2S_ReceiveData(sFLASH_SPI);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Sends a Half Word through the SPI interface and return the Half Word
|
||||
* received from the SPI bus.
|
||||
* @param HalfWord: Half Word to send.
|
||||
* @retval The value of the received Half Word.
|
||||
*/
|
||||
uint16_t sFLASH_SendHalfWord(uint16_t HalfWord)
|
||||
{
|
||||
/*!< Loop while DR register in not empty */
|
||||
while (SPI_I2S_GetFlagStatus(sFLASH_SPI, SPI_I2S_FLAG_TXE) == RESET);
|
||||
|
||||
/*!< Send Half Word through the sFLASH peripheral */
|
||||
SPI_I2S_SendData(sFLASH_SPI, HalfWord);
|
||||
|
||||
/*!< Wait to receive a Half Word */
|
||||
while (SPI_I2S_GetFlagStatus(sFLASH_SPI, SPI_I2S_FLAG_RXNE) == RESET);
|
||||
|
||||
/*!< Return the Half Word read from the SPI bus */
|
||||
return SPI_I2S_ReceiveData(sFLASH_SPI);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Enables the write access to the FLASH.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void sFLASH_WriteEnable(void)
|
||||
{
|
||||
/*!< Select the FLASH: Chip Select low */
|
||||
sFLASH_CS_LOW();
|
||||
|
||||
/*!< Send "Write Enable" instruction */
|
||||
sFLASH_SendByte(sFLASH_CMD_WREN);
|
||||
|
||||
/*!< Deselect the FLASH: Chip Select high */
|
||||
sFLASH_CS_HIGH();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Polls the status of the Write In Progress (WIP) flag in the FLASH's
|
||||
* status register and loop until write operation has completed.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void sFLASH_WaitForWriteEnd(void)
|
||||
{
|
||||
uint8_t flashstatus = 0;
|
||||
|
||||
/*!< Select the FLASH: Chip Select low */
|
||||
sFLASH_CS_LOW();
|
||||
|
||||
/*!< Send "Read Status Register" instruction */
|
||||
sFLASH_SendByte(sFLASH_CMD_RDSR);
|
||||
|
||||
/*!< Loop as long as the memory is busy with a write cycle */
|
||||
do
|
||||
{
|
||||
/*!< Send a dummy byte to generate the clock needed by the FLASH
|
||||
and put the value of the status register in FLASH_Status variable */
|
||||
flashstatus = sFLASH_SendByte(sFLASH_DUMMY_BYTE);
|
||||
|
||||
}
|
||||
while ((flashstatus & sFLASH_WIP_FLAG) == SET); /* Write in progress */
|
||||
|
||||
/*!< Deselect the FLASH: Chip Select high */
|
||||
sFLASH_CS_HIGH();
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Initializes the peripherals used by the SPI FLASH driver.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void sFLASH_LowLevel_Init(void)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStructure;
|
||||
|
||||
/*!< Enable the SPI clock */
|
||||
sFLASH_SPI_CLK_INIT(sFLASH_SPI_CLK, ENABLE);
|
||||
|
||||
/*!< Enable GPIO clocks */
|
||||
RCC_AHB1PeriphClockCmd(sFLASH_SPI_SCK_GPIO_CLK | sFLASH_SPI_MISO_GPIO_CLK |
|
||||
sFLASH_SPI_MOSI_GPIO_CLK | sFLASH_CS_GPIO_CLK, ENABLE);
|
||||
|
||||
/*!< SPI pins configuration *************************************************/
|
||||
|
||||
/*!< Connect SPI pins to AF5 */
|
||||
GPIO_PinAFConfig(sFLASH_SPI_SCK_GPIO_PORT, sFLASH_SPI_SCK_SOURCE, sFLASH_SPI_SCK_AF);
|
||||
GPIO_PinAFConfig(sFLASH_SPI_MISO_GPIO_PORT, sFLASH_SPI_MISO_SOURCE, sFLASH_SPI_MISO_AF);
|
||||
GPIO_PinAFConfig(sFLASH_SPI_MOSI_GPIO_PORT, sFLASH_SPI_MOSI_SOURCE, sFLASH_SPI_MOSI_AF);
|
||||
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_DOWN;
|
||||
|
||||
/*!< SPI SCK pin configuration */
|
||||
GPIO_InitStructure.GPIO_Pin = sFLASH_SPI_SCK_PIN;
|
||||
GPIO_Init(sFLASH_SPI_SCK_GPIO_PORT, &GPIO_InitStructure);
|
||||
|
||||
/*!< SPI MOSI pin configuration */
|
||||
GPIO_InitStructure.GPIO_Pin = sFLASH_SPI_MOSI_PIN;
|
||||
GPIO_Init(sFLASH_SPI_MOSI_GPIO_PORT, &GPIO_InitStructure);
|
||||
|
||||
/*!< SPI MISO pin configuration */
|
||||
GPIO_InitStructure.GPIO_Pin = sFLASH_SPI_MISO_PIN;
|
||||
GPIO_Init(sFLASH_SPI_MISO_GPIO_PORT, &GPIO_InitStructure);
|
||||
|
||||
/*!< Configure sFLASH Card CS pin in output pushpull mode ********************/
|
||||
GPIO_InitStructure.GPIO_Pin = sFLASH_CS_PIN;
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
|
||||
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
||||
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
||||
GPIO_Init(sFLASH_CS_GPIO_PORT, &GPIO_InitStructure);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief DeInitializes the peripherals used by the SPI FLASH driver.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void sFLASH_LowLevel_DeInit(void)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStructure;
|
||||
|
||||
/*!< Disable the sFLASH_SPI ************************************************/
|
||||
SPI_Cmd(sFLASH_SPI, DISABLE);
|
||||
|
||||
/*!< DeInitializes the sFLASH_SPI *******************************************/
|
||||
SPI_I2S_DeInit(sFLASH_SPI);
|
||||
|
||||
/*!< sFLASH_SPI Periph clock disable ****************************************/
|
||||
sFLASH_SPI_CLK_INIT(sFLASH_SPI_CLK, DISABLE);
|
||||
|
||||
/*!< Configure all pins used by the SPI as input floating *******************/
|
||||
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
|
||||
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
||||
|
||||
GPIO_InitStructure.GPIO_Pin = sFLASH_SPI_SCK_PIN;
|
||||
GPIO_Init(sFLASH_SPI_SCK_GPIO_PORT, &GPIO_InitStructure);
|
||||
|
||||
GPIO_InitStructure.GPIO_Pin = sFLASH_SPI_MISO_PIN;
|
||||
GPIO_Init(sFLASH_SPI_MISO_GPIO_PORT, &GPIO_InitStructure);
|
||||
|
||||
GPIO_InitStructure.GPIO_Pin = sFLASH_SPI_MOSI_PIN;
|
||||
GPIO_Init(sFLASH_SPI_MOSI_GPIO_PORT, &GPIO_InitStructure);
|
||||
|
||||
GPIO_InitStructure.GPIO_Pin = sFLASH_CS_PIN;
|
||||
GPIO_Init(sFLASH_CS_GPIO_PORT, &GPIO_InitStructure);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
Reference in New Issue
Block a user