实现小板在线信息，支持主板程序V2.10及以上

2023-12-29 18:10:31 +08:00
parent ff87d33675
commit e44d5716cb
7 changed files with 835 additions and 18 deletions
--- a/updata/console_uart.py
+++ b/updata/console_uart.py
@@ -228,6 +228,7 @@ class console_dlg(QObject):
        self.cmd_list.append("cp "+self.find_file_by_type(".bin")+" /home/root/config/checker_slave.bin")
        self.cmd_list.append("cp "+self.find_file_by_type("scheme.json")+" /home/root/config/checker_ye_cfg.json")
        self.cmd_list.append("cp cfg.json /home/root/config/cfg.json")
+        self.cmd_list.append("cp "+self.find_file_by_type(".sh")+" /home/root/config/checker_app_pre.sh")
        self.cmd_list.append("cp "+self.find_file_by_type(".axf")+" /lib/firmware/checker_m4.axf")
        self.cmd_list.append("cp "+self.find_file_by_type(".dtb")+" /boot/stm32mp157d-atk.dtb")
        self.cmd_list.append("cp "+self.find_file_by_type(".py")+ " /home/root/daemon.py")
--- a/updata/runtask_table.py
+++ b/updata/runtask_table.py
@@ -4,12 +4,43 @@ import prottcp as pt



+
+#参数数据类型
+_g_params_type =[
+  "str",
+  "int8",
+  "int16",
+  "int32",
+  "hex",
+  "none"
+]
+
+
+
+
 # task_id,errcode,par_count,ret_count
 _g_ew_task_table=[
-("电源准备",0,1,10,0),
-("延时等待",1,1,2,1),
-("测量桥丝阻值",2,4,1,1),
-("上电充能",3,2,3,2),
+("电源准备",0,1,10,0,{
+  "参数类型":"int16",
+  "返回值类型":"none",
+  "参数描述":"检测前校准检测过程中需要使用的电压，便于检测过程中快速输出电压，范围55~270(0.1V)",
+  "返回值描述":"无返回值"
+}),
+("延时等待",1,1,2,1,{
+  "参数类型":"int16",
+  "返回值类型":"int16",
+  "参数描述":"延时时间(0.1s),置1打开电流监控",
+  "返回值描述":"打开电流监控时的电流波动ADC值"
+}),
+("测量桥丝阻值",2,4,1,1,{
+  "参数类型":"int16",
+  "返回值类型":"int16",
+  "参数描述":"测量方式:0 4线制;1 2线1-4通;2 2线2-3通;5 读取电阻校准值",
+  "返回值描述":"打开电流监控时的电流波动ADC值"
+}),
+("上电充能",3,2,3,2,{
+
+}),
 ("设置总线电压",4,1,1,1),
 ("获取总线电流",5,1,0,2),
 ("使能MTP",6,5,1,0),
@@ -289,14 +320,19 @@ def coder_check_decode_sn(data:bytearray):
 if __name__ == "__main__":
  u=pt.protu()

-  # # 检测并写入流水号
-  # data=coder_check_write_sn(2,12345)
+  # 检测并写入流水号
+  # data=coder_check_write_sn(0,12345)

-  # 检测并读取工厂信息和延时
-  data=coder_check_read_fatinfo(2)
-
-  u.cmd=0x21
-  data=u.encode(data)
-  print(data.hex(' '))
+  # # 检测并读取工厂信息和延时
+  # data=coder_check_read_fatinfo(0)

+  # data=bytearray.fromhex("0d 00 00 0d 01 1f 0a 01 18 02 0a 05 01 14 00 04 00")
+  # u.cmd=0x21
+  # data=u.encode(data)
+  # print(data.hex(' '))
+  def fun():
+    return "fun_test"
+  d={"fun":fun
+     }
+  print(d["fun"]())

--- a/updata/runtask_win.py
+++ b/updata/runtask_win.py
@@ -0,0 +1,60 @@
+from math import *
+import dearpygui.dearpygui as dpg
+import dearpygui.demo as demo
+
+dpg.create_context()
+dpg.create_viewport(title='Custom Title', width=800, height=800)
+
+# demo.show_demo()
+
+
+sindatax = []
+sindatay = []
+cosdatay = []
+for i in range(100):
+    sindatax.append(i/100)
+    sindatay.append(0.5 + 0.5*sin(50*i/100))
+    cosdatay.append(0.5 + 0.75*cos(50*i/100))
+
+
+def _on_demo_close(sender, app_data, user_data):
+  dpg.delete_item(sender)
+  dpg.delete_item("__demo_texture_container")
+  dpg.delete_item("__demo_colormap_registry")
+  dpg.delete_item("__demo_hyperlinkTheme")
+
+def show():
+  dpg.add_texture_registry(label="Demo Texture Container", tag="__demo_texture_container")
+  dpg.add_colormap_registry(label="Demo Colormap Registry", tag="__demo_colormap_registry")
+  with dpg.theme(tag="__demo_hyperlinkTheme"):
+    with dpg.theme_component(dpg.mvButton):
+      dpg.add_theme_color(dpg.mvThemeCol_Button, [0, 0, 0, 0])
+      dpg.add_theme_color(dpg.mvThemeCol_ButtonActive, [0, 0, 0, 0])
+      dpg.add_theme_color(dpg.mvThemeCol_ButtonHovered, [29, 151, 236, 25])
+      dpg.add_theme_color(dpg.mvThemeCol_Text, [29, 151, 236])
+
+  def _log(sender, app_data, user_data):
+      print(f"sender: {sender}, \t app_data: {app_data}, \t user_data: {user_data}")
+  with dpg.window(label="Dear PyGui Demo", width=800, height=500, on_close=_on_demo_close, pos=(0, 0), tag="__demo_id"):
+    # create plot
+    dpg.add_text("Anti-aliasing can be enabled from the plot's context menu (see Help).", bullet=True)
+    with dpg.plot(label="Line Series", height=400, width=-1):
+
+      # optionally create legend
+      dpg.add_plot_legend()
+
+      # REQUIRED: create x and y axes
+      dpg.add_plot_axis(dpg.mvXAxis, label="x")
+      
+      with dpg.plot_axis(dpg.mvYAxis, label="y"):
+
+        # series belong to a y axis
+        dpg.add_line_series(sindatax, sindatay, label="0.5 + 0.5 * sin(x)")
+        dpg.add_line_series(sindatax, cosdatay, label="0.5 + 0.75 * cos(x)")
+
+
+show()
+dpg.setup_dearpygui()
+dpg.show_viewport()
+dpg.start_dearpygui()
+dpg.destroy_context()
--- a/updata/task_table.py
+++ b/updata/task_table.py
@@ -0,0 +1,677 @@
+
+
+import task_table_fun as ttf
+
+
+
+
+
+
+
+
+_g_ew_task_table=[
+  {
+    "TaskID":0,
+    "TaskName":"电源准备",
+    "TaskBrief":"电压范围5.5V~27V,分辨率0.1V",
+    "ParamInfo":"预设电压列表，最多10个",
+    "ReturnInfo":"无返回值",
+    "ReturnSize":0,
+    "inputfun":ttf.input_task0,
+    "outputfun":ttf.output_task0
+  },
+  {
+    "TaskID":1,
+    "TaskName":"延时等待",
+    "TaskBrief":"延时时间返回0s~6553s,分辨率0.1S。波动DAC换算 Vad/4096*3.3/100/11",
+    "ParamInfo":["延时时间0.1s","使1/失0电流监控"],
+    "ReturnInfo":["电流波动DAC"],
+    "ParamType":"int16",
+    "RetType":"int16"
+  },
+  {
+    "TaskID":2,
+    "TaskName":"桥丝电阻测试",
+    "TaskBrief":"测量桥丝阻值,可配置测量模式: 0 4线制; 1 2线1-4通;2 2线2-3通;5 返回电阻校准值",
+    "ParamInfo":["测量模式"],
+    "ReturnInfo":["电阻0.01Ω"],
+    "ParamType":"int16",
+    "RetType":"int16"
+  },
+  {
+    "TaskID":3,
+    "TaskName":"上电充能",
+    "TaskBrief":"统计模块的上电充能，具有电压设置功能,采集档位 R10_0p1mA_1p6mA_UC",
+    "ParamInfo":["总线电压0.1V","超时时间 0.1ms","充电结束时的AD值"],
+    "ReturnInfo":["总线电压0.1V","总线电流低于设置AD值的时间"],
+    "ParamType":"int16",
+    "RetType":"int16"
+  },
+  {
+    "TaskID":4,
+    "TaskName":"设置总线电压",
+    "TaskBrief":"设置总线电压",
+    "ParamInfo":["总线电压"],
+    "ReturnInfo":["总线电压"],
+    "ParamType":"int16",
+    "RetType":"int16"
+  },
+  {
+    "TaskID":5,
+    "TaskName":"获取总线电流",
+    "TaskBrief":"测量总线基本电流",
+    "ParamInfo":[],
+    "ReturnInfo":["总线正电流 0.1uA","总线反电流 0.1uA"],
+    "ParamType":"none",
+    "RetType":"int16"
+  },
+  {
+    "TaskID":6,
+    "TaskName":"使能MTP",
+    "TaskBrief":"使能MTP擦写，0失能/1使能",
+    "ParamInfo":["是否使能"],
+    "ReturnInfo":[],
+    "ParamType":"int16",
+    "RetType":"none"
+  },
+  {
+    "TaskID":7,
+    "TaskName":"扫描UID",
+    "TaskBrief":"扫描总线上的电子模块",
+    "ParamInfo":["UID长度","是否使能UID对比","是否使能反馈监控"],
+    "ReturnInfo":["最大反馈电流","最大反馈时间","最小反馈电流","最小反馈时间","UID 0~1","UID 2~3","UID 4~5","UID 6~7"],
+    "ParamType":"int16",
+    "RetType":"int16"
+  },
+  {
+    "TaskID":8,
+    "TaskName":"写配置参数",
+    "TaskBrief":"写模块运行时的配置参数",
+    "ParamInfo":["起爆MOS选择 0内部/1外部","通信信号源 0:rxh 1:rxl 2:rx","通信模式 1:差分 2:单端","起爆日志标记周期 0:不标记 1:5ms 2:10ms 3:20ms 4:50ms 5:10ms 6:150ms 7:200ms","UID长度","密码长度","模块版本"],
+    "ReturnInfo":[],
+  },
+  {
+    "TaskID":9,
+    "TaskName":"检测配置参数",
+    "TaskBrief":"检测模块运行时的配置参数",
+    "ParamInfo":["起爆MOS选择 0内部/1外部","通信信号源 0:rxh 1:rxl 2:rx","通信模式 1:差分 2:单端","起爆日志标记周期 0:不标记 1:5ms 2:10ms 3:20ms 4:50ms 5:10ms 6:150ms 7:200ms","UID长度","密码长度","模块版本"],
+    "ReturnInfo":[],
+  },
+  {
+    "TaskID":10,
+    "TaskName":"验证配置",
+    "TaskBrief":"验证配置",
+    "ParamInfo":["掩码低2byte","掩码高2byte","比较低2byte","比较高2byte"],
+    "ReturnInfo":[],
+  },
+  {
+    "TaskID":11,
+    "TaskName":"模拟注码",
+    "TaskBrief":"写入测试用的UID和密码，此任务之前要先写配置参数",
+    "ParamInfo":[],
+    "ReturnInfo":[],
+  },
+  {
+    "TaskID":12,
+    "TaskName":"模拟注码验证",
+    "TaskBrief":"写入测试用的UID和密码，此任务之前要先写三码数据",
+    "ParamInfo":[],
+    "ReturnInfo":[],
+  },
+  {
+    "TaskID":13,
+    "TaskName":"芯片自检",
+    "TaskBrief":"芯片自检",
+    "ParamInfo":["自检模式","自检时间ms"],
+    "ReturnInfo":["自检模式0x08的回读数据"],
+  },
+  {
+    "TaskID":14,
+    "TaskName":"状态检测",
+    "TaskBrief":"状态码比较",
+    "ParamInfo":["掩码参数","比较结果值"],
+    "ReturnInfo":["状态值低2byte","状态值高2byte"],
+  },
+  {
+    "TaskID":15,
+    "TaskName":"充电",
+    "TaskBrief":"充电",
+    "ParamInfo":["充电模式","充电分组"],
+    "ReturnInfo":[],
+  },
+  {
+    "TaskID":16,
+    "TaskName":"放电",
+    "TaskBrief":"放电",
+    "ParamInfo":[],
+    "ReturnInfo":[],
+  },
+  {
+    "TaskID":17,
+    "TaskName":"写延时",
+    "TaskBrief":"写延时",
+    "ParamInfo":["延时ms"],
+    "ReturnInfo":[],
+  },
+  {
+    "TaskID":18,
+    "TaskName":"读延时",
+    "TaskBrief":"读延时",
+    "ParamInfo":[],
+    "ReturnInfo":["延时值ms"],
+  },
+  {
+    "TaskID":19,
+    "TaskName":"时钟校准",
+    "TaskBrief":"时钟校准",
+    "ParamInfo":["校准周期ms","校准脉冲数"],
+    "ReturnInfo":["校准值，真实值的4倍"],
+  },
+  {
+    "TaskID":20,
+    "TaskName":"设置通信地址",
+    "TaskBrief":"设置通信地址",
+    "ParamInfo":["通信地址","设置模式 0:系统 1:UID配置地址 2:快速配置","延时"],
+    "ReturnInfo":["延时"],
+  },
+  {
+    "TaskID":21,
+    "TaskName":"状态巡检",
+    "TaskBrief":"测试系统只能巡检一个地址，起始地址应该大于1，结束地址小于1024,两个地址差值应该小于256",
+    "ParamInfo":["起始地址","结束地址","状态码"],
+    "ReturnInfo":["地址结果"],
+  },
+  {
+    "TaskID":22,
+    "TaskName":"起爆使能",
+    "TaskBrief":"起爆使能",
+    "ParamInfo":[],
+    "ReturnInfo":[],
+  },
+  {
+    "TaskID":23,
+    "TaskName":"起爆检测",
+    "TaskBrief":"起爆",
+    "ParamInfo":["采样超时0.01ms","起爆电流AD","延迟采样ms"],
+    "ReturnInfo":["等待时间 0.01ms"],
+  },
+  {
+    "TaskID":24,
+    "TaskName":"写入缓存数据",
+    "TaskBrief":"写入缓存数据",
+    "ParamInfo":["MTP地址","缓存地址","写入字节数"],
+    "ReturnInfo":[],
+  },
+  {
+    "TaskID":25,
+    "TaskName":"验证缓存数据",
+    "TaskBrief":"验证缓存数据",
+    "ParamInfo":["MTP地址","缓存地址","写入字节数"],
+    "ReturnInfo":[],
+  },
+  {
+    "TaskID":26,
+    "TaskName":"关总线",
+    "TaskBrief":"关总线",
+    "ParamInfo":[],
+    "ReturnInfo":[],
+  },
+  {
+    "TaskID":27,
+    "TaskName":"升级",
+    "TaskBrief":"EW模块升级 升级模式 0:无app时升级 1:无条件升级",
+    "ParamInfo":["充电时间 ms","app启动时间 ms","总线关断时间 ms","升级模式"],
+    "ReturnInfo":["错误代码"],
+    "CommTestCmd":"ResistorSample",
+  },
+  {
+    "TaskID":28,
+    "TaskName":"充能统计",
+    "TaskBrief":"充能统计",
+    "ParamInfo":["充电挡位","充电超时0.1us","充电电流判线 AD值","充末电流结束值 0.1uA","充电最长时间 0.1s","充电高压保持时间 0.1s"],
+    "ReturnInfo":["充能值 0.1ms","充末电流 0.1uA","充电最大电流 0.1mA","充电抖动幅值 adv"],
+  },
+  {
+    "TaskID":29,
+    "TaskName":"异常判定",
+    "TaskBrief":"对已检项目进行异常判定，如果异常判定结果不在过滤范围内，则此任务失败",
+    "ParamInfo":["过滤值1","过滤值2","过滤值3","过滤值4","过滤值5","过滤值6","过滤值7","过滤值8","过滤值9","过滤值10",],
+    "ReturnInfo":[],
+  },
+  {
+    "TaskID":30,
+    "TaskName":"重新执行任务",
+    "TaskBrief":"重新执行指定序号的任务，本次执行会覆盖之前的结果",
+    "ParamInfo":["需要重新执行的任务序号"],
+    "ReturnInfo":[],
+  },
+  {
+    "TaskID":31,
+    "TaskName":"写三码数据",
+    "TaskBrief":"写入缓存的三码数据，此任务之前要先写配置参数",
+    "ParamInfo":[],
+    "ReturnInfo":[],
+  },
+  {
+    "TaskID":32,
+    "TaskName":"校验三码数据",
+    "TaskBrief":"验证写入的三码数据，此任务之前要先写三码数据",
+    "ParamInfo":[],
+    "ReturnInfo":[],
+    "CommTestCmd":"ResistorSample",
+  },
+  {
+    "TaskID":33,
+    "TaskName":"配置三码数据到小板",
+    "TaskBrief":"先把三码数据写入小板缓存，然后才能使用三码绑定任务",
+    "ParamInfo":["uid,pwd长度","数据0,1","数据2,3","数据4,5","数据6,7","数据8,9","数据10,11","数据12,13","数据14,15","数据16,17",],
+    "ReturnInfo":[],
+  },
+  {
+    "TaskID":34,
+    "TaskName":"任务插槽",
+    "TaskBrief":"程序可以动态添加要执行的任务，此任务将执行所有序号匹配的动态任务",
+    "ParamInfo":["插槽序号"],
+    "ReturnInfo":[],
+  },
+  {
+    "TaskID":35,
+    "TaskName":"读取MTP",
+    "TaskBrief":"从指定mtp地址读取数据",
+    "ParamInfo":["mtp地址(4byte寻址)","读取长度(byte)",],
+    "ReturnInfo":["数据0,1","数据2,3","数据4,5","数据6,7","数据8,9","数据10,11","数据12,13","数据14,15",],
+  },
+  {
+    "TaskID":36,
+    "TaskName":"写入MTP",
+    "TaskBrief":"写入数据到指定mtp地址",
+    "ParamInfo":["mtp地址(4byte寻址)","写入长度(byte)","数据0,1","数据2,3","数据4,5","数据6,7","数据8,9","数据10,11","数据12,13","数据14,15",],
+    "ReturnInfo":[],
+  },
+  {
+    "TaskID":37,
+    "TaskName":"设置电阻校准值",
+    "TaskBrief":"电阻测量的校准值，不建议将此任务添加进方案中",
+    "ParamInfo":["电阻校准值"],
+    "ReturnInfo":[],
+  },
+  {
+    "TaskID":38,
+    "TaskName":"读取流水号",
+    "TaskBrief":"读取27bit的流水号数据，对比失败则此任务失败",
+    "ParamInfo":["要校验的流水号低2字节","要校验的流水号高2字节"],
+    "ReturnInfo":["读取的流水号低2字节","读取的流水号高2字节"],
+  },
+  {
+    "TaskID":39,
+    "TaskName":"写入流水号",
+    "TaskBrief":"采用读改写的方式写入27bit的流水号数据",
+    "ParamInfo":["要写入的流水号低2字节","要写入的流水号高2字节"],
+    "ReturnInfo":[],
+  },
+  {
+    "TaskID":40,
+    "TaskName":"写固定延时",
+    "TaskBrief":"写入延时并掉电保存，需要复位后刷新",
+    "ParamInfo":["延时值ms"],
+    "ReturnInfo":[],
+  },
+  {
+    "TaskID":41,
+    "TaskName":"复位",
+    "TaskBrief":"0复位至bootloader，1复位至app",
+    "ParamInfo":["复位类型"],
+    "ReturnInfo":[],
+  },
+]
+
+
+
+
+_g_jq_task_table=[
+  {
+    "TaskID": 0,
+    "TaskName": "电源准备",
+    "TaskBrief": "检测前校准检测过程中需要使用的电压，便于检测过程中快速输出电压。电压范围55~270",
+    "ParamInfo": ["预设电压1", "预设电压2", "预设电压3", "预设电压4", "预设电压5", "预设电压6", "预设电压7", "预设电压8", "预设电压9", "预设电压10",],
+    "ReturnInfo": [],
+  }, {
+    "TaskID": 1,
+    "TaskName": "上电充能",
+    "TaskBrief": "统计上电瞬间，模块功耗。电流计数方式 A = 3.3*ADC/4096/510/11",
+    "ParamInfo": ["总线电压", "采样超时0.1ms", "计时启停ADC"],
+    "ReturnInfo": ["总线电压", "大于启停的时间"],
+    "CommTestCmd": "PowerOn",
+  }, {
+    "TaskID": 2,
+    "TaskName": "设置总线电压",
+    "TaskBrief": "设置总线电压为预设电压中的值",
+    "ParamInfo": ["总线电压"],
+    "ReturnInfo": ["总线电压"],
+    "CommTestCmd": "SetBusV",
+  }, {
+    "TaskID": 3,
+    "TaskName": "获取总线电流",
+    "TaskBrief": "获取总线正反两个极性电流",
+    "ParamInfo": [],
+    "ReturnInfo": ["总线正电流", "总线反电流"],
+  }, {
+    "TaskID": 4,
+    "TaskName": "扫描UID",
+    "TaskBrief": "芯片通信测试，分配网络地址。芯片复位后，第一条通信测试命令",
+    "ParamInfo": ["使1/失0反码采集", "使0/失1UID全0验证"],
+    "ReturnInfo": ["最大反馈电流", "最大反馈时间", "最小反馈电流", "最小反馈时间", "1字节", "3字节", "5字节", "7字节"],
+  }, {
+    "TaskID": 5,
+    "TaskName": "密码验证",
+    "TaskBrief": "芯片密码验证",
+    "ParamInfo": ["0码/1原码验证"],
+    "ReturnInfo": [],
+  }, {
+    "TaskID": 6,
+    "TaskName": "读取芯片代码",
+    "TaskBrief": "读取芯片代码",
+    "ParamInfo": [],
+    "ReturnInfo": ["2字节代码"],
+  }, {
+    "TaskID": 7,
+    "TaskName": "OTP检测",
+    "TaskBrief": "对OTP数据进行检测,可屏蔽检测区域",
+    "ParamInfo": ["1关/0检UID密码为0", "1关/0检延时保留区为0", "1关/0检用户区为0"],
+    "ReturnInfo": [],
+    "CommTestCmd": "OTPCheck",
+  }, {
+    "TaskID": 8,
+    "TaskName": "工厂程测检测",
+    "TaskBrief": "芯片出厂检测，会在24 25区写0xFF",
+    "ParamInfo": [],
+    "ReturnInfo": [],
+  }, {
+    "TaskID": 9,
+    "TaskName": "读芯片状态",
+    "TaskBrief": "将芯片状态值与参数值进行算术与操作，等于参数值表示执行成功",
+    "ParamInfo": ["状态值掩码"],
+    "ReturnInfo": [],
+  }, {
+    "TaskID": 10,
+    "TaskName": "写工厂信息",
+    "TaskBrief": "在OTP 20~23区间写入工厂数据",
+    "ParamInfo": ["2字节数据", "2字节数据"],
+    "ReturnInfo": [],
+  }, {
+    "TaskID": 11,
+    "TaskName": "充能统计",
+    "TaskBrief": "充能统会发送充电命令，计电流判线设定值，从上升到下降的时间。同时记录充过程中最大电流。以及结束高压充电的总线电流和充电电流监控时间。充电电流判线计数公式 电流=AD/4093*3.3/100/11",
+    "ParamInfo": ["超时0.1us", "电流判线AD", "充电结束值0.1uA", "充电超时0.1S", "电流监控0.1S"],
+    "ReturnInfo": ["充能值0.1ms", "充末电流0.1uA", "最大充电电流0.1mA", "充电抖动ADV"],
+  }, {
+    "TaskID": 12,
+    "TaskName": "充电电压检测",
+    "TaskBrief": "由高向低扫描芯片电压检测值,扫描失败返回值为0",
+    "ParamInfo": ["起始DAC", "结束DAC"],
+    "ReturnInfo": ["扫描通过的DAC"],
+  }, {
+    "TaskID": 13,
+    "TaskName": "延时等待",
+    "TaskBrief": "延时流程，同时可以启动总线电流监测 设置单位0.1S。波动DAC换算 Vad/4096*3.3/100/11",
+    "ParamInfo": ["延时时间", "使1/失0电流监控"],
+    "ReturnInfo": ["电流波动DAC"],
+  }, {
+    "TaskID": 14,
+    "TaskName": "写延时",
+    "TaskBrief": "向延时寄存器写入数据",
+    "ParamInfo": ["延时"],
+    "ReturnInfo": [],
+  }, {
+    "TaskID": 15,
+    "TaskName": "读延时",
+    "TaskBrief": "读延时寄存器",
+    "ParamInfo": [],
+    "ReturnInfo": ["延时值"],
+  }, {
+    "TaskID": 16,
+    "TaskName": "时钟校准",
+    "TaskBrief": "发送校准脉冲",
+    "ParamInfo": ["脉冲周期", "脉冲个数"],
+    "ReturnInfo": [],
+  }, {
+    "TaskID": 17,
+    "TaskName": "放电",
+    "TaskBrief": "发送放电命令,使能快速放电，还需要配置放电时间。快速放电仅JQ2012才有。放电时间单位0.1S，该值应该大于0快速放电才有效",
+    "ParamInfo": ["0/1使能快速", "快速时间"],
+    "ReturnInfo": [],
+  }, {
+    "TaskID": 18,
+    "TaskName": "复位放电",
+    "TaskBrief": "执行复位和放电，并检测复测成功",
+    "ParamInfo": [],
+    "ReturnInfo": [],
+  }, {
+    "TaskID": 19,
+    "TaskName": "起爆使能",
+    "TaskBrief": "发送起爆使能命令",
+    "ParamInfo": [],
+    "ReturnInfo": [],
+  }, {
+    "TaskID": 20,
+    "TaskName": "起爆充能",
+    "TaskBrief": "发送起爆命令后，检测起爆完成后对电容的充电。判断电流上升沿到下降沿的时间。充能电流ADC/4096*3.3/100/21",
+    "ParamInfo": ["电流判线AD", "起爆脉冲个数", "延时采集时间"],
+    "ReturnInfo": ["充能时间", "充电电流", "充电电流波动"],
+  }, {
+    "TaskID": 21,
+    "TaskName": "使能通讯末电流采集",
+    "TaskBrief": "启动命令通讯结束后电流采集，与获取通讯电流配合。两个任务间应该避免充电、OTP写和起爆操作",
+    "ParamInfo": [],
+    "ReturnInfo": [],
+  }, {
+    "TaskID": 22,
+    "TaskName": "获取通讯末电流",
+    "TaskBrief": "获取通讯电流配合与使能通讯末电流采集，获取两个任务间，通讯完成后的最大电流",
+    "ParamInfo": [],
+    "ReturnInfo": ["通讯末电流"],
+  }, {
+    "TaskID": 23,
+    "TaskName": "写OTP数据",
+    "TaskBrief": "向芯片OTP中写入数据",
+    "ParamInfo": ["OTP地址", "数据长度", "1数据", "3数据", "5数据", "7数据"],
+    "ReturnInfo": [],
+  }, {
+    "TaskID": 24,
+    "TaskName": "读OTP数据",
+    "TaskBrief": "从芯片OTP中读取数据",
+    "ParamInfo": ["OTP地址", "数据长度"],
+    "ReturnInfo": ["nBytesOTP数据"],
+  }, {
+    "TaskID": 25,
+    "TaskName": "清除起爆命令",
+    "TaskBrief": "起爆脉冲重新计算",
+    "ParamInfo": [],
+    "ReturnInfo": [],
+  }, {
+    "TaskID": 26,
+    "TaskName": "关总线",
+    "TaskBrief": "关闭总线输出",
+    "ParamInfo": [],
+    "ReturnInfo": [],
+  }, {
+    "TaskID": 27,
+    "TaskName": "缓存写入OTP",
+    "TaskBrief": "缓存数据写入OTP数据",
+    "ParamInfo": ["OTP 地址", "缓存区起始", "写入数据长度"],
+    "ReturnInfo": [],
+  },
+  {
+    "TaskID": 28,
+    "TaskName": "三码绑定",
+    "TaskBrief": "注码检测指令使用，直接使用命令中的三码数据",
+    "ParamInfo": [],
+    "ReturnInfo": [],
+  }, {
+    "TaskID": 29,
+    "TaskName": "验证三码",
+    "TaskBrief": "验证芯片三码数据，直接使用命令中的三码数据",
+    "ParamInfo": [],
+    "ReturnInfo": [],
+  }, {
+    "TaskID": 30,
+    "TaskName": "电容压差",
+    "TaskBrief": "充电后，总线断电测试电容给芯片供电，评估芯片延时功耗",
+    "ParamInfo": ["断电时间0.1S"],
+    "ReturnInfo": ["压差mV"],
+  }, {
+    "TaskID": 31,
+    "TaskName": "桥丝电阻测试",
+    "TaskBrief": "测量桥丝阻值。可配置测量模式 0 4线制， 1 2线1-4通，2 2线2-3通",
+    "ParamInfo": ["测量模式"],
+    "ReturnInfo": ["电阻0.01Ω"],
+  }, {
+    "TaskID": 32,
+    "TaskName": "使能OTP",
+    "TaskBrief": "OTP使能命令",
+    "ParamInfo": [],
+    "ReturnInfo": [],
+  }, {
+    "TaskID": 33,
+    "TaskName": "写版本",
+    "TaskBrief": "写入模块版本号到OTP 20地址，该值应该小于32",
+    "ParamInfo": ["版本号"],
+    "ReturnInfo": [],
+  }, {
+    "TaskID": 34,
+    "TaskName": "读版本",
+    "TaskBrief": "获取写入的版本号",
+    "ParamInfo": [],
+    "ReturnInfo": ["版本号"],
+  }, {
+    "TaskID": 35,
+    "TaskName": "写缓存数据",
+    "TaskBrief": "将系统缓存区的数据写入到OTP中，主要用于写工厂信息",
+    "ParamInfo": ["OTP地址", "缓存地址", "写入长度"],
+    "ReturnInfo": [],
+  }, {
+    "TaskID": 36,
+    "TaskName": "验证缓存数据",
+    "TaskBrief": "对比缓存数据与OTP数据",
+    "ParamInfo": ["OTP地址", "缓存地址", "验证长度"],
+    "ReturnInfo": [],
+  },
+  {
+    "TaskID": 37,
+    "TaskName": "验证延时时间",
+    "TaskBrief": "验证延时和otp是否相等",
+    "ParamInfo": [],
+    "ReturnInfo": [],
+  },
+  {
+    "TaskID": 38,
+    "TaskName": "切换总线极性",
+    "TaskBrief": "反复切换总线极性，输出最后一次极性切换后的电流",
+    "ParamInfo": ["间隔时间ms", "切换次数"],
+    "ReturnInfo": [],
+  },
+  {
+    "TaskID": 39,
+    "TaskName": "异常判定",
+    "TaskBrief": "对已检项目进行异常判定，如果异常判定结果不在过滤范围内，则此任务失败",
+    "ParamInfo": ["过滤值1", "过滤值2", "过滤值3", "过滤值4", "过滤值5", "过滤值6", "过滤值7", "过滤值8", "过滤值9", "过滤值10",],
+    "ReturnInfo": [],
+  },
+  {
+    "TaskID": 40,
+    "TaskName": "重新执行任务",
+    "TaskBrief": "重新执行指定序号的任务，本次执行会覆盖之前的结果",
+    "ParamInfo": ["需要重新执行的任务序号"],
+    "ReturnInfo": [],
+  },
+  {
+    "TaskID": 41,
+    "TaskName": "配置三码数据到小板",
+    "TaskBrief": "先把三码数据写入小板缓存，然后才能使用三码绑定任务",
+    "ParamInfo": ["uid,pwd长度", "数据0,1", "数据2,3", "数据4,5", "数据6,7", "数据8,9", "数据10,11", "数据12,13", "数据14,15", "数据16,17",],
+    "ReturnInfo": [],
+  },
+  {
+    "TaskID": 42,
+    "TaskName": "任务插槽",
+    "TaskBrief": "程序可以动态添加要执行的任务，此任务将执行所有序号匹配的动态任务",
+    "ParamInfo": ["插槽序号"],
+    "ReturnInfo": [],
+  },
+  {
+    "TaskID": 43,
+    "TaskName": "设置电阻校准值",
+    "TaskBrief": "电阻测量的校准值，不建议将此任务添加进方案中",
+    "ParamInfo": ["电阻校准值"],
+    "ReturnInfo": [],
+  },
+  {
+    "TaskID": 44,
+    "TaskName": "写入流水号",
+    "TaskBrief": "采用读改写的方式写入27bit的流水号数据",
+    "ParamInfo": ["要写入的流水号低2字节", "要写入的流水号高2字节"],
+    "ReturnInfo": [],
+  },
+  {
+    "TaskID": 45,
+    "TaskName": "读取流水号",
+    "TaskBrief": "读取27bit的流水号数据，对比失败则此任务失败",
+    "ParamInfo": ["要校验的流水号低2字节", "要校验的流水号高2字节"],
+    "ReturnInfo": ["读取的流水号低2字节", "读取的流水号高2字节"],
+  },
+  {
+    "TaskID": 46,
+    "TaskName": "写固定延时",
+    "TaskBrief": "写入延时并掉电保存",
+    "ParamInfo": ["延时值ms"],
+    "ReturnInfo": [],
+  },
+]
+
+
+
+_g_ext_task_table=[
+  {
+    "TaskID": 100,
+    "TaskName": "异常判定",
+    "TaskBrief": "对已检项目进行异常判定，如果异常判定结果不在过滤范围内，则此任务失败",
+    "ParamInfo": ["过滤值1", "过滤值2", "过滤值3", "过滤值4", "过滤值5", "过滤值6", "过滤值7", "过滤值8", "过滤值9", "过滤值10",],
+    "ReturnInfo": [],
+  },
+  {
+    "TaskID": 101,
+    "TaskName": "重新执行任务",
+    "TaskBrief": "重新执行指定序号的任务，本次执行会覆盖之前的结果",
+    "ParamInfo": ["需要重新执行的任务序号"],
+    "ReturnInfo": [],
+  },
+  {
+    "TaskID": 102,
+    "TaskName": "配置三码数据到小板",
+    "TaskBrief": "先把三码数据写入小板缓存，然后才能使用三码绑定任务",
+    "ParamInfo": ["uid,pwd长度", "数据0,1", "数据2,3", "数据4,5", "数据6,7", "数据8,9", "数据10,11", "数据12,13", "数据14,15", "数据16,17",],
+    "ReturnInfo": [],
+  },
+  {
+    "TaskID": 103,
+    "TaskName": "任务插槽",
+    "TaskBrief": "程序可以动态添加要执行的任务，此任务将执行所有序号匹配的动态任务",
+    "ParamInfo": ["插槽序号"],
+    "ReturnInfo": [],
+  },
+  {
+    "TaskID": 104,
+    "TaskName": "设置电阻校准值",
+    "TaskBrief": "电阻测量的校准值，不建议将此任务添加进方案中",
+    "ParamInfo": ["电阻校准值"],
+    "ReturnInfo": [],
+  },
+]
+
+
+
+
+if __name__ == "__main__":
+  print(_g_ew_task_table[3])
+  print(is_number("三"))
+
--- a/updata/task_table_fun.py
+++ b/updata/task_table_fun.py
@@ -0,0 +1,43 @@
+
+
+
+
+def is_number(s:str):
+    try:  # 如果能运行float(s)语句，返回True（字符串s是浮点数）
+        float(s)
+        return True
+    except ValueError:  # ValueError为Python的一种标准异常，表示"传入无效的参数"
+        pass  # 如果引发了ValueError这种异常，不做任何事情（pass：不做任何事情，一般用做占位语句）
+    try:
+        import unicodedata  # 处理ASCii码的包
+        unicodedata.numeric(s)  # 把一个表示数字的字符串转换为浮点数返回的函数
+        return True
+    except (TypeError, ValueError):
+        pass
+    return False
+
+
+
+# 任务0的输入函数，逗号隔开,输入小数
+def input_task0(text:str):
+  ret=bytearray()
+  sp=text.split(",")
+  for i in sp:
+    if(is_number(i)):
+      num=int(float(i)*10)
+      ret.append(num&0xff)
+      ret.append((num>>8)&0xff)
+  return ret
+
+# 解析任务0的返回值
+def output_task0(data:bytearray):
+  pass
+
+
+
+
+
+
+
+
+
--- a/updata/udp.py
+++ b/updata/udp.py
@@ -121,7 +121,7 @@ class myudp(QObject):
        for i in range(len(cmd_list)):
            resoult=self.send(ip,cmd_list[i][0],cmd_list[i][1],cmd_list[i][2])
            if(resoult!=True):
-                err_str="cmd="+cmd_list[i][0]+" filed."
+                err_str="cmd="+cmd_list[i][0]+" failed."
                print(STR_RED,ip,"|"+err_str,STR_END)
                self.end_signal.emit(ip,False,err_str)
                return
--- a/updata/updata_ssh.py
+++ b/updata/updata_ssh.py
@@ -94,7 +94,7 @@ class data_box(QObject):
        self.lable.setText(title)
        self.text = QLabel(father)
        self.text.setObjectName(u"text")
-        self.text.setGeometry(QRect(40,x+20,450,30))
+        self.text.setGeometry(QRect(40,x+20,550,30))
        self.text.setText(text)


@@ -331,7 +331,7 @@ class updata_dlg(QWidget):
        self.sstate_but.setText("小板在线状态")
        self.sstate_but.clicked.connect(self.sstate_but_clicked)
        self.sstate_but.setToolTip("点击此按钮查看小板在线情况，显示在线小板的地址。")
-        self.sstate_but.setEnabled(False)
+        # self.sstate_but.setEnabled(False)
        # self.sstate_but.setToolTipDuration(1)

        # 初始化添加文件按钮
@@ -878,9 +878,9 @@ class updata_dlg(QWidget):
        # u.rate_signal.connect(self.rate_slot)
        # u.end_signal.connect(self.end_slot)
        u.data_signal.connect(self.data_slot)
-        updata_cmd="mcu comm_test"
+        updata_cmd="slave_info"
        cmd_list=[]
-        cmd_list.append((updata_cmd,2,5))# 两次返回，五秒超时
+        cmd_list.append((updata_cmd,1,5))# 1次返回，五秒超时
        t = threading.Thread(target=u.bordcast, args=(cmd_list,))
        t.start()

@@ -920,7 +920,7 @@ class updata_dlg(QWidget):
        slave_len=len(self.get_selected_slave())
        if(len(self.data_list)>=slave_len):
            w=QDialog(self.widget)
-            w.resize(703-150, slave_len*50+20)
+            w.resize(800-150, slave_len*50+20)
            w.setWindowTitle("返回数据展示")
            self.creat_databoxs(w,self.data_list)
            w.show()