tinyUSB/hw/bsp/stm32f407g_disc1/board.mk

CFLAGS += \
	-DHSE_VALUE=8000000 \
	-DCFG_TUSB_MCU=OPT_MCU_STM32F4 \
	-DSTM32F407xx \
	-mthumb \
	-mabi=aapcs-linux \
	-mcpu=cortex-m4 \
	-mfloat-abi=hard \
	-mfpu=fpv4-sp-d16 \
	-nostdlib

# All source paths should be relative to the top level.
LD_FILE = hw/bsp/stm32f407g_disc1/STM32F407VGTx_FLASH.ld

LDFLAGS += -mthumb -mcpu=cortex-m4

SRC_C += \
	hw/mcu/st/system-init/system_stm32f4xx.c

SRC_S += \
	hw/mcu/st/startup/stm32f4/startup_stm32f407xx.s

INC += \
	-I$(TOP)/hw/mcu/st/stm32lib/CMSIS/STM32F4xx/Include \
	-I$(TOP)/hw/mcu/st/cmsis

VENDOR = st
CHIP_FAMILY = stm32f4

JLINK_DEVICE = stm32f407vg

# Path to STM32 Cube Programmer CLI
ifeq ($(OS),Windows_NT)
	STM32Prog = C:/Program Files/STMicroelectronics/STM32Cube/STM32CubeProgrammer/bin/STM32_Programmer_CLI
else 
	UNAME_S := $(shell uname -s)
	
  ifeq ($(UNAME_S),Linux)
  STM32Prog = $(HOME)/STMicroelectronics/STM32Cube/STM32CubeProgrammer/bin/STM32_Programmer_CLI
  endif
  
	ifeq ($(UNAME_S),Darwin)
	STM32Prog = STM32_Programmer_CLI
  endif
endif

# flash target using on-board stlink
flash: $(BUILD)/$(BOARD)-firmware.elf
	$(STM32Prog) --connect port=swd --write $< --go
fix pca10056 build error due to nrfx undef usage 2019-03-20 01:35:52 +07:00			`CFLAGS += \`
bsp.board_stm32f407g_disc1: Switch to external oscillator (more precise). 2019-01-11 13:47:44 -05:00			`-DHSE_VALUE=8000000 \`
needs to be filled out. blinks though 2018-11-27 18:11:03 -08:00			`-DCFG_TUSB_MCU=OPT_MCU_STM32F4 \`
			`-DSTM32F407xx \`
			`-mthumb \`
			`-mabi=aapcs-linux \`
			`-mcpu=cortex-m4 \`
			`-mfloat-abi=hard \`
move -nostdlib (-nostartfiles) into board.mk since nrf5x require the use of std startup. Add verbose mode to makefile 2019-03-20 01:23:49 +07:00			`-mfpu=fpv4-sp-d16 \`
			`-nostdlib`
needs to be filled out. blinks though 2018-11-27 18:11:03 -08:00
			`# All source paths should be relative to the top level.`
			`LD_FILE = hw/bsp/stm32f407g_disc1/STM32F407VGTx_FLASH.ld`

			`LDFLAGS += -mthumb -mcpu=cortex-m4`

			`SRC_C += \`
st: Use submodules for system files when possible, use more up to date files otherwise. Update STM32F4-DISCOVERY demo and board.mk to reflect changes. 2019-03-04 10:41:05 -05:00			`hw/mcu/st/system-init/system_stm32f4xx.c`
needs to be filled out. blinks though 2018-11-27 18:11:03 -08:00
			`SRC_S += \`
st: Use submodules for system files when possible, use more up to date files otherwise. Update STM32F4-DISCOVERY demo and board.mk to reflect changes. 2019-03-04 10:41:05 -05:00			`hw/mcu/st/startup/stm32f4/startup_stm32f407xx.s`
needs to be filled out. blinks though 2018-11-27 18:11:03 -08:00
			`INC += \`
st: Use submodules for system files when possible, use more up to date files otherwise. Update STM32F4-DISCOVERY demo and board.mk to reflect changes. 2019-03-04 10:41:05 -05:00			`-I$(TOP)/hw/mcu/st/stm32lib/CMSIS/STM32F4xx/Include \`
			`-I$(TOP)/hw/mcu/st/cmsis`
needs to be filled out. blinks though 2018-11-27 18:11:03 -08:00
Move all paths using "stm" to "st" subdirectories, update config.mk. 2019-02-27 09:15:07 -05:00			`VENDOR = st`
needs to be filled out. blinks though 2018-11-27 18:11:03 -08:00			`CHIP_FAMILY = stm32f4`
add flash target for stm32 board using stm32cubeprogammger cli 2019-03-09 01:04:26 +07:00
update flash-jlink target for m0 and m4 board 2019-03-17 15:42:57 +07:00			`JLINK_DEVICE = stm32f407vg`

add flash target for stm32 board using stm32cubeprogammger cli 2019-03-09 01:04:26 +07:00			`# Path to STM32 Cube Programmer CLI`
adding segger project for stm32f4 2019-03-10 01:24:13 +07:00			`ifeq ($(OS),Windows_NT)`
			`STM32Prog = C:/Program Files/STMicroelectronics/STM32Cube/STM32CubeProgrammer/bin/STM32_Programmer_CLI`
			`else`
			`UNAME_S := $(shell uname -s)`

			`ifeq ($(UNAME_S),Linux)`
			`STM32Prog = $(HOME)/STMicroelectronics/STM32Cube/STM32CubeProgrammer/bin/STM32_Programmer_CLI`
			`endif`

			`ifeq ($(UNAME_S),Darwin)`
			`STM32Prog = STM32_Programmer_CLI`
			`endif`
			`endif`

adding flash (jlink) 2019-03-16 01:34:26 +07:00			`# flash target using on-board stlink`
update flash-jlink target for m0 and m4 board 2019-03-17 15:42:57 +07:00			`flash: $(BUILD)/$(BOARD)-firmware.elf`
add flash target for stm32 board using stm32cubeprogammger cli 2019-03-09 01:04:26 +07:00			`$(STM32Prog) --connect port=swd --write $< --go`