tinyUSB/tinyusb/device/dcd_lpc175x_6x.c

/**************************************************************************/
/*!
    @file     dcd_lpc175x_6x.c
    @author   hathach (tinyusb.org)

    @section LICENSE

    Software License Agreement (BSD License)

    Copyright (c) 2013, hathach (tinyusb.org)
    All rights reserved.

    Redistribution and use in source and binary forms, with or without
    modification, are permitted provided that the following conditions are met:
    1. Redistributions of source code must retain the above copyright
    notice, this list of conditions and the following disclaimer.
    2. Redistributions in binary form must reproduce the above copyright
    notice, this list of conditions and the following disclaimer in the
    documentation and/or other materials provided with the distribution.
    3. Neither the name of the copyright holders nor the
    names of its contributors may be used to endorse or promote products
    derived from this software without specific prior written permission.

    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
    EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

    This file is part of the tinyusb stack.
*/
/**************************************************************************/

#include "tusb_option.h"

#if MODE_DEVICE_SUPPORTED && (TUSB_CFG_MCU == MCU_LPC175X_6X)

#define _TINY_USB_SOURCE_FILE_
//--------------------------------------------------------------------+
// INCLUDE
//--------------------------------------------------------------------+
#include "dcd.h"
#include "dcd_lpc175x_6x.h"
#include "usbd_dcd.h"

//--------------------------------------------------------------------+
// MACRO CONSTANT TYPEDEF
//--------------------------------------------------------------------+
#define DCD_QHD_MAX 32
#define DCD_QTD_MAX  32 // TODO scale with configure

typedef struct {
  volatile dcd_dma_descriptor_t* udca[DCD_QHD_MAX]; // must be 128 byte aligned
  dcd_dma_descriptor_t dd[DCD_QTD_MAX][2]; // each endpoints can have up to 2 DD queued at a time TODO 0-1 are not used, offset to reduce memory

  uint8_t class_code[DCD_QHD_MAX];

  struct {
    uint8_t* p_data;
    uint16_t remaining_bytes;
    uint8_t  int_on_complete;
  }control_dma;

}dcd_data_t;

TUSB_CFG_ATTR_USBRAM ATTR_ALIGNED(128) STATIC_VAR dcd_data_t dcd_data;

//--------------------------------------------------------------------+
// INTERNAL OBJECT & FUNCTION DECLARATION
//--------------------------------------------------------------------+
static void bus_reset(void);
static tusb_error_t pipe_control_read(void * buffer, uint16_t length);
static tusb_error_t pipe_control_write(void const * buffer, uint16_t length);
static tusb_error_t pipe_control_xfer(uint8_t ep_id, uint8_t* p_buffer, uint16_t length);

//--------------------------------------------------------------------+
// PIPE HELPER
//--------------------------------------------------------------------+
static inline uint8_t edpt_addr2phy(uint8_t endpoint_addr) ATTR_CONST ATTR_ALWAYS_INLINE;
static inline uint8_t edpt_addr2phy(uint8_t endpoint_addr)
{
  return 2*(endpoint_addr & 0x0F) + ((endpoint_addr & TUSB_DIR_IN_MASK) ? 1 : 0);
}

static inline void edpt_set_max_packet_size(uint8_t ep_id, uint16_t max_packet_size) ATTR_ALWAYS_INLINE;
static inline void edpt_set_max_packet_size(uint8_t ep_id, uint16_t max_packet_size)
{ // follows example in 11.10.4.2
  LPC_USB->USBReEp    |= BIT_(ep_id);
  LPC_USB->USBEpInd    = ep_id; // select index before setting packet size
  LPC_USB->USBMaxPSize = max_packet_size;

#ifndef _TEST_
  while ((LPC_USB->USBDevIntSt & DEV_INT_ENDPOINT_REALIZED_MASK) == 0) {} // TODO can be omitted
  LPC_USB->USBDevIntClr = DEV_INT_ENDPOINT_REALIZED_MASK;
#endif

}

//--------------------------------------------------------------------+
// USBD-DCD API
//--------------------------------------------------------------------+
static void bus_reset(void)
{
  // step 7 : slave mode set up
  LPC_USB->USBEpIntClr     = 0xFFFFFFFF;          // clear all pending interrupt
	LPC_USB->USBDevIntClr    = 0xFFFFFFFF;          // clear all pending interrupt
	LPC_USB->USBEpIntEn      = (uint32_t) BIN8(11); // control endpoint cannot use DMA, non-control all use DMA
	LPC_USB->USBEpIntPri     = 0;                   // same priority for all endpoint

	// step 8 : DMA set up
	LPC_USB->USBEpDMADis     = 0xFFFFFFFF; // firstly disable all dma
	LPC_USB->USBDMARClr      = 0xFFFFFFFF; // clear all pending interrupt
	LPC_USB->USBEoTIntClr    = 0xFFFFFFFF;
	LPC_USB->USBNDDRIntClr   = 0xFFFFFFFF;
	LPC_USB->USBSysErrIntClr = 0xFFFFFFFF;

	memclr_(&dcd_data, sizeof(dcd_data_t));
}

bool tusb_dcd_init(uint8_t port)
{
  (void) port;

  //------------- user manual 11.13 usb device controller initialization -------------//  LPC_USB->USBEpInd = 0;
  // step 6 : set up control endpoint
  edpt_set_max_packet_size(0, TUSB_CFG_DEVICE_CONTROL_ENDOINT_SIZE);
  edpt_set_max_packet_size(1, TUSB_CFG_DEVICE_CONTROL_ENDOINT_SIZE);

  bus_reset();

  LPC_USB->USBDevIntEn = (DEV_INT_DEVICE_STATUS_MASK | DEV_INT_ENDPOINT_SLOW_MASK | DEV_INT_ERROR_MASK);
	LPC_USB->USBUDCAH    = (uint32_t) dcd_data.udca;
	LPC_USB->USBDMAIntEn = (DMA_INT_END_OF_XFER_MASK | DMA_INT_ERROR_MASK );

	sie_write(SIE_CMDCODE_DEVICE_STATUS, 1, 1); // connect

  return TUSB_ERROR_NONE;
}

static void endpoint_non_control_isr(uint32_t eot_int)
{
  for(uint8_t ep_id = 2; ep_id < DCD_QHD_MAX; ep_id++ )
  {
    if ( BIT_TEST_(eot_int, ep_id) )
    {
      dcd_dma_descriptor_t* const p_first_dd = &dcd_data.dd[ep_id][0];
      dcd_dma_descriptor_t* const p_last_dd  = dcd_data.dd[ep_id] + (p_first_dd->is_next_valid ? 1 : 0); // Maximum is 2 QTD are queued in an endpoint

      // only handle when Controller already finished the last DD
      if ( dcd_data.udca[ep_id] == p_last_dd )
      {
        dcd_data.udca[ep_id] = p_first_dd; // UDCA currently points to the last DD, change to the fixed DD
        p_first_dd->buffer_length = 0; // buffer length is used to determined if first dd is queued in pipe xfer function

        if ( p_last_dd->int_on_complete )
        {
          edpt_hdl_t edpt_hdl =
          {
              .port     = 0,
              .index      = ep_id,
              .class_code = dcd_data.class_code[ep_id]
          };
          bool succeeded = (p_last_dd->status == DD_STATUS_NORMAL || p_last_dd->status == DD_STATUS_DATA_UNDERUN) ? true : false;

          tusb_dcd_xfer_complete(edpt_hdl, p_last_dd->present_count, succeeded); // report only xferred bytes in the IOC qtd
        }
      }
    }
  }
}

static void endpoint_control_isr(void)
{
  uint32_t const interrupt_enable = LPC_USB->USBEpIntEn;
  uint32_t const endpoint_int_status = LPC_USB->USBEpIntSt & interrupt_enable;
//  LPC_USB->USBEpIntClr = endpoint_int_status; // acknowledge interrupt TODO cannot immediately acknowledge setup packet

  //------------- Setup Recieved-------------//
  if ( (endpoint_int_status & BIT_(0)) &&
       (sie_read(SIE_CMDCODE_ENDPOINT_SELECT+0, 1) & SIE_SELECT_ENDPOINT_SETUP_RECEIVED_MASK) )
  {
    (void) sie_read(SIE_CMDCODE_ENDPOINT_SELECT_CLEAR_INTERRUPT+0, 1); // clear setup bit

    tusb_control_request_t control_request;
    pipe_control_read(&control_request, 8); // TODO read before clear setup above
    tusb_dcd_setup_received(0, (uint8_t*) &control_request);
  }
  else if (endpoint_int_status & 0x03)
  {
    uint8_t const ep_id = ( endpoint_int_status & BIT_(0) ) ? 0 : 1;

    if ( dcd_data.control_dma.remaining_bytes > 0 )
    { // there are still data to transfer
      pipe_control_xfer(ep_id, dcd_data.control_dma.p_data, dcd_data.control_dma.remaining_bytes);
    }
    else
    {
      dcd_data.control_dma.remaining_bytes = 0;

      if ( BIT_TEST_(dcd_data.control_dma.int_on_complete, ep_id) )
      {
        edpt_hdl_t edpt_hdl = { .port = 0, .class_code = 0 };
        dcd_data.control_dma.int_on_complete = 0;

        // FIXME xferred_byte for control xfer is not needed now !!!
        tusb_dcd_xfer_complete(edpt_hdl, 0, true);
      }
    }
  }

  LPC_USB->USBEpIntClr = endpoint_int_status; // acknowledge interrupt TODO cannot immediately acknowledge setup packet
}

void hal_dcd_isr(uint8_t port)
{
  (void) port;
  uint32_t const device_int_enable = LPC_USB->USBDevIntEn;
  uint32_t const device_int_status = LPC_USB->USBDevIntSt & device_int_enable;
  LPC_USB->USBDevIntClr = device_int_status;// Acknowledge handled interrupt

  //------------- usb bus event -------------//
  if (device_int_status & DEV_INT_DEVICE_STATUS_MASK)
  {
    uint8_t const dev_status_reg = sie_read(SIE_CMDCODE_DEVICE_STATUS, 1);
    if (dev_status_reg & SIE_DEV_STATUS_RESET_MASK)
    {
      bus_reset();
      tusb_dcd_bus_event(0, USBD_BUS_EVENT_RESET);
    }

    if (dev_status_reg & SIE_DEV_STATUS_CONNECT_CHANGE_MASK)
    { // device is disconnected, require using VBUS (P1_30)
      tusb_dcd_bus_event(0, USBD_BUS_EVENT_UNPLUGGED);
    }

    if (dev_status_reg & SIE_DEV_STATUS_SUSPEND_CHANGE_MASK)
    {
      if (dev_status_reg & SIE_DEV_STATUS_SUSPEND_MASK)
      {
        tusb_dcd_bus_event(0, USBD_BUS_EVENT_SUSPENDED);
      }
//      else
//      {
//        tusb_dcd_bus_event(0, USBD_BUS_EVENT_RESUME);
//      }
    }
  }

  //------------- Control Endpoint (Slave Mode) -------------//
  if (device_int_status & DEV_INT_ENDPOINT_SLOW_MASK)
  {
    endpoint_control_isr();
  }

  //------------- Non-Control Endpoint (DMA Mode) -------------//
  uint32_t const dma_int_enable = LPC_USB->USBDMAIntEn;
  uint32_t const dma_int_status = LPC_USB->USBDMAIntSt & dma_int_enable;

  if (dma_int_status & DMA_INT_END_OF_XFER_MASK)
  {
    uint32_t eot_int = LPC_USB->USBEoTIntSt;
    LPC_USB->USBEoTIntClr = eot_int; // acknowledge interrupt source

    endpoint_non_control_isr(eot_int);
  }

  if (device_int_status & DEV_INT_ERROR_MASK || dma_int_status & DMA_INT_ERROR_MASK)
  {
    uint32_t error_status = sie_read(SIE_CMDCODE_READ_ERROR_STATUS, 1);
    (void) error_status;
//    ASSERT(false, (void) 0);
  }
}

//--------------------------------------------------------------------+
// USBD API - CONTROLLER
//--------------------------------------------------------------------+
void tusb_dcd_connect(uint8_t port)
{
  (void) port;
  sie_write(SIE_CMDCODE_DEVICE_STATUS, 1, 1);
}

void tusb_dcd_set_address(uint8_t port, uint8_t dev_addr)
{
  (void) port;
  sie_write(SIE_CMDCODE_SET_ADDRESS, 1, 0x80 | dev_addr); // 7th bit is : device_enable
}

void tusb_dcd_set_config(uint8_t port, uint8_t config_num)
{
  (void) port;
  (void) config_num;
  sie_write(SIE_CMDCODE_CONFIGURE_DEVICE, 1, 1);
}

//--------------------------------------------------------------------+
// PIPE CONTROL HELPER
//--------------------------------------------------------------------+
static inline uint16_t length_byte2dword(uint16_t length_in_bytes) ATTR_ALWAYS_INLINE ATTR_CONST;
static inline uint16_t length_byte2dword(uint16_t length_in_bytes)
{
  return (length_in_bytes + 3) / 4; // length_in_dword
}

static tusb_error_t pipe_control_xfer(uint8_t ep_id, uint8_t* p_buffer, uint16_t length)
{
  uint16_t const packet_len = min16_of(length, TUSB_CFG_DEVICE_CONTROL_ENDOINT_SIZE);

  if (ep_id)
  {
    ASSERT_STATUS ( pipe_control_write(p_buffer, packet_len) );
  }else
  {
    ASSERT_STATUS ( pipe_control_read(p_buffer, packet_len) );
  }

  dcd_data.control_dma.remaining_bytes -= packet_len;
  dcd_data.control_dma.p_data          += packet_len;

  return TUSB_ERROR_NONE;
}

static tusb_error_t pipe_control_write(void const * buffer, uint16_t length)
{
  uint32_t const * p_write_data = (uint32_t const *) buffer;

  LPC_USB->USBCtrl   = USBCTRL_WRITE_ENABLE_MASK; // logical endpoint = 0
	LPC_USB->USBTxPLen = length;

	for (uint16_t count = 0; count < length_byte2dword(length); count++)
	{
		LPC_USB->USBTxData = *p_write_data; // NOTE: cortex M3 have no problem with alignment
		p_write_data++;
	}

	LPC_USB->USBCtrl   = 0;

	// select control IN & validate the endpoint
	sie_write(SIE_CMDCODE_ENDPOINT_SELECT+1, 0, 0);
	sie_write(SIE_CMDCODE_BUFFER_VALIDATE  , 0, 0);

  return TUSB_ERROR_NONE;
}

static tusb_error_t pipe_control_read(void * buffer, uint16_t length)
{
  LPC_USB->USBCtrl = USBCTRL_READ_ENABLE_MASK; // logical endpoint = 0
  while ((LPC_USB->USBRxPLen & USBRXPLEN_PACKET_READY_MASK) == 0) {} // TODO blocking, should have timeout

  uint16_t actual_length = min16_of(length, (uint16_t) (LPC_USB->USBRxPLen & USBRXPLEN_PACKET_LENGTH_MASK) );
  uint32_t *p_read_data = (uint32_t*) buffer;
  for( uint16_t count=0; count < length_byte2dword(actual_length); count++)
  {
    *p_read_data = LPC_USB->USBRxData;
    p_read_data++; // increase by 4 ( sizeof(uint32_t) )
  }

  LPC_USB->USBCtrl = 0;

  // select control OUT & clear the endpoint
  sie_write(SIE_CMDCODE_ENDPOINT_SELECT+0, 0, 0);
  sie_write(SIE_CMDCODE_BUFFER_CLEAR     , 0, 0);

  return TUSB_ERROR_NONE;
}

//--------------------------------------------------------------------+
// CONTROL PIPE API
//--------------------------------------------------------------------+
void tusb_dcd_control_stall(uint8_t port)
{
  sie_write(SIE_CMDCODE_ENDPOINT_SET_STATUS+0, 1, SIE_SET_ENDPOINT_STALLED_MASK | SIE_SET_ENDPOINT_CONDITION_STALLED_MASK);
}

bool tusb_dcd_control_xfer(uint8_t port, tusb_dir_t dir, uint8_t * p_buffer, uint16_t length, bool int_on_complete)
{
  (void) port;

  VERIFY( !(length != 0 && p_buffer == NULL) );

  // determine Endpoint where Data & Status phase occurred (IN or OUT)
  uint8_t const ep_data   = (dir == TUSB_DIR_IN) ? 1 : 0;
  uint8_t const ep_status = 1 - ep_data;

  dcd_data.control_dma.int_on_complete = int_on_complete ? BIT_(ep_status) : 0;

  //------------- Data Phase -------------//
  if ( length )
  {
    dcd_data.control_dma.p_data          = (uint8_t*) p_buffer;
    dcd_data.control_dma.remaining_bytes = length;

    // lpc17xx already received the first DATA OUT packet by now
    VERIFY_STATUS ( pipe_control_xfer(ep_data, p_buffer, length), false );
  }

  //------------- Status Phase (opposite direct to Data) -------------//
  if (dir == TUSB_DIR_OUT)
  { // only write for CONTROL OUT, CONTROL IN data will be retrieved in hal_dcd_isr // TODO ????
    VERIFY_STATUS ( pipe_control_write(NULL, 0), false );
  }

  return true;
}

//--------------------------------------------------------------------+
// BULK/INTERRUPT/ISO PIPE API
//--------------------------------------------------------------------+
edpt_hdl_t tusb_dcd_edpt_open(uint8_t port, tusb_descriptor_endpoint_t const * p_endpoint_desc, uint8_t class_code)
{
  (void) port;

  edpt_hdl_t const null_handle = { 0 };

  // TODO refractor to universal pipe open validation function
  if (p_endpoint_desc->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) return null_handle; // TODO not support ISO yet
  ASSERT (p_endpoint_desc->wMaxPacketSize.size <= 64, null_handle); // TODO ISO can be 1023, but ISO not supported now

  uint8_t ep_id = edpt_addr2phy( p_endpoint_desc->bEndpointAddress );

  //------------- Realize Endpoint with Max Packet Size -------------//
  edpt_set_max_packet_size(ep_id, p_endpoint_desc->wMaxPacketSize.size);
	dcd_data.class_code[ep_id] = class_code;

	//------------- first DD prepare -------------//
	dcd_dma_descriptor_t* const p_dd = &dcd_data.dd[ep_id][0];
	memclr_(p_dd, sizeof(dcd_dma_descriptor_t));

	p_dd->is_isochronous  = (p_endpoint_desc->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) ? 1 : 0;
	p_dd->max_packet_size = p_endpoint_desc->wMaxPacketSize.size;
	p_dd->is_retired      = 1; // inactive at first

	dcd_data.udca[ ep_id ] = p_dd; // hook to UDCA

	sie_write(SIE_CMDCODE_ENDPOINT_SET_STATUS+ep_id, 1, 0); // clear all endpoint status

  return (edpt_hdl_t)
      {
          .port     = 0,
          .index      = ep_id,
          .class_code = class_code
      };
}

bool tusb_dcd_edpt_busy(edpt_hdl_t edpt_hdl)
{
  return (dcd_data.udca[edpt_hdl.index] != NULL && !dcd_data.udca[edpt_hdl.index]->is_retired);
}

void tusb_dcd_edpt_stall(edpt_hdl_t edpt_hdl)
{
  sie_write(SIE_CMDCODE_ENDPOINT_SET_STATUS+edpt_hdl.index, 1, SIE_SET_ENDPOINT_STALLED_MASK);
}

void tusb_dcd_edpt_clear_stall(uint8_t port, uint8_t edpt_addr)
{
  uint8_t ep_id = edpt_addr2phy(edpt_addr);

  sie_write(SIE_CMDCODE_ENDPOINT_SET_STATUS+ep_id, 1, 0);
}

void dd_xfer_init(dcd_dma_descriptor_t* p_dd, void* buffer, uint16_t total_bytes)
{
  p_dd->next                  = 0;
  p_dd->is_next_valid         = 0;
  p_dd->buffer_addr           = (uint32_t) buffer;
  p_dd->buffer_length         = total_bytes;
  p_dd->status                = DD_STATUS_NOT_SERVICED;
  p_dd->iso_last_packet_valid = 0;
  p_dd->present_count         = 0;
}

tusb_error_t tusb_dcd_edpt_queue_xfer(edpt_hdl_t edpt_hdl, uint8_t * buffer, uint16_t total_bytes)
{ // NOTE for sure the qhd has no dds
  dcd_dma_descriptor_t* const p_fixed_dd = &dcd_data.dd[edpt_hdl.index][0]; // always queue with the fixed DD

  dd_xfer_init(p_fixed_dd, buffer, total_bytes);
  p_fixed_dd->is_retired      = 1;
  p_fixed_dd->int_on_complete = 0;

  return TUSB_ERROR_NONE;
}

tusb_error_t tusb_dcd_edpt_xfer(edpt_hdl_t edpt_hdl, uint8_t* buffer, uint16_t total_bytes, bool int_on_complete)
{
  dcd_dma_descriptor_t* const p_first_dd = &dcd_data.dd[edpt_hdl.index][0];

  //------------- fixed DD is already queued a xfer -------------//
  if ( p_first_dd->buffer_length )
  {
    // setup new dd
    dcd_dma_descriptor_t* const p_dd = &dcd_data.dd[ edpt_hdl.index ][1];
    memclr_(p_dd, sizeof(dcd_dma_descriptor_t));

    dd_xfer_init(p_dd, buffer, total_bytes);

    p_dd->max_packet_size     = p_first_dd->max_packet_size;
    p_dd->is_isochronous      = p_first_dd->is_isochronous;
    p_dd->int_on_complete     = int_on_complete;

    // hook to fixed dd
    p_first_dd->next          = (uint32_t) p_dd;
    p_first_dd->is_next_valid = 1;
  }
  //------------- fixed DD is free -------------//
  else
  {
    dd_xfer_init(p_first_dd, buffer, total_bytes);
    p_first_dd->int_on_complete = int_on_complete;
  }

  p_first_dd->is_retired = 0; // activate xfer
  dcd_data.udca[edpt_hdl.index] = p_first_dd;
  LPC_USB->USBEpDMAEn = BIT_(edpt_hdl.index);

  if ( edpt_hdl.index % 2 )
  { // endpoint IN need to actively raise DMA request
    LPC_USB->USBDMARSet = BIT_(edpt_hdl.index);
  }

  return TUSB_ERROR_NONE;
}

#endif