tinyUSB/hw/bsp/kinetis_k/boards/frdm_k64f/frdm_k64f.mex

<?xml version="1.0" encoding= "UTF-8" ?>
<configuration name="FRDM-K64F" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_14 http://mcuxpresso.nxp.com/XSD/mex_configuration_14.xsd" uuid="c7cfbd44-6838-4477-a52a-4900c4871511" version="14" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_14" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <common>
      <processor>MK64FN1M0xxx12</processor>
      <package>MK64FN1M0VLL12</package>
      <board>FRDM-K64F</board>
      <board_revision>E1</board_revision>
      <mcu_data>ksdk2_0</mcu_data>
      <cores selected="core0">
         <core name="Cortex-M4F" id="core0" description="M4 core"/>
      </cores>
      <description></description>
   </common>
   <preferences>
      <validate_boot_init_only>true</validate_boot_init_only>
      <generate_extended_information>true</generate_extended_information>
      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
      <update_include_paths>true</update_include_paths>
      <generate_registers_defines>false</generate_registers_defines>
   </preferences>
   <tools>
      <pins name="Pins" version="14.0" enabled="true" update_project_code="true">
         <generated_project_files>
            <file path="board/pin_mux.c" update_enabled="true"/>
            <file path="board/pin_mux.h" update_enabled="true"/>
         </generated_project_files>
         <pins_profile>
            <processor_version>14.0.0</processor_version>
         </pins_profile>
         <functions_list>
            <function name="BOARD_InitPins">
               <description>Configures pin routing and optionally pin electrical features.</description>
               <options>
                  <callFromInitBoot>false</callFromInitBoot>
                  <prefix>BOARD_</prefix>
                  <coreID>core0</coreID>
                  <enableClock>true</enableClock>
               </options>
               <dependencies>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
               </dependencies>
               <pins/>
            </function>
            <function name="BOARD_InitButtons">
               <description>Configures pin routing and optionally pin electrical features.</description>
               <options>
                  <callFromInitBoot>true</callFromInitBoot>
                  <prefix>BOARD_</prefix>
                  <coreID>core0</coreID>
                  <enableClock>true</enableClock>
               </options>
               <dependencies>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitButtons">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.port" description="Pins initialization requires the PORT Driver in the project." problem_level="2" source="Pins:BOARD_InitButtons">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.gpio" description="Pins initialization requires the GPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitButtons">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
               </dependencies>
               <pins>
                  <pin peripheral="GPIOC" signal="GPIO, 6" pin_num="78" pin_signal="CMP0_IN0/PTC6/LLWU_P10/SPI0_SOUT/PDB0_EXTRG/I2S0_RX_BCLK/FB_AD9/I2S0_MCLK">
                     <pin_features>
                        <pin_feature name="identifier" value="SW2"/>
                        <pin_feature name="direction" value="INPUT"/>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="up"/>
                        <pin_feature name="pull_enable" value="enable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="GPIOA" signal="GPIO, 4" pin_num="38" pin_signal="PTA4/LLWU_P3/FTM0_CH1/NMI_b/EZP_CS_b">
                     <pin_features>
                        <pin_feature name="direction" value="INPUT"/>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="down"/>
                        <pin_feature name="pull_enable" value="disable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
               </pins>
            </function>
            <function name="BOARD_InitLEDs">
               <description>Configures pin routing and optionally pin electrical features.</description>
               <options>
                  <callFromInitBoot>true</callFromInitBoot>
                  <prefix>BOARD_</prefix>
                  <coreID>core0</coreID>
                  <enableClock>true</enableClock>
               </options>
               <dependencies>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDs">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.port" description="Pins initialization requires the PORT Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDs">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.gpio" description="Pins initialization requires the GPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDs">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
               </dependencies>
               <pins>
                  <pin peripheral="GPIOB" signal="GPIO, 21" pin_num="67" pin_signal="PTB21/SPI2_SCK/FB_AD30/CMP1_OUT">
                     <pin_features>
                        <pin_feature name="direction" value="OUTPUT"/>
                        <pin_feature name="gpio_init_state" value="true"/>
                        <pin_feature name="slew_rate" value="slow"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="down"/>
                        <pin_feature name="pull_enable" value="disable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="GPIOB" signal="GPIO, 22" pin_num="68" pin_signal="PTB22/SPI2_SOUT/FB_AD29/CMP2_OUT">
                     <pin_features>
                        <pin_feature name="direction" value="OUTPUT"/>
                        <pin_feature name="gpio_init_state" value="true"/>
                        <pin_feature name="slew_rate" value="slow"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="down"/>
                        <pin_feature name="pull_enable" value="disable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="GPIOE" signal="GPIO, 26" pin_num="33" pin_signal="PTE26/ENET_1588_CLKIN/UART4_CTS_b/RTC_CLKOUT/USB_CLKIN">
                     <pin_features>
                        <pin_feature name="direction" value="OUTPUT"/>
                        <pin_feature name="gpio_init_state" value="true"/>
                        <pin_feature name="slew_rate" value="slow"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="down"/>
                        <pin_feature name="pull_enable" value="disable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
               </pins>
            </function>
            <function name="BOARD_InitDEBUG_UART">
               <description>Configures pin routing and optionally pin electrical features.</description>
               <options>
                  <callFromInitBoot>true</callFromInitBoot>
                  <prefix>BOARD_</prefix>
                  <coreID>core0</coreID>
                  <enableClock>true</enableClock>
               </options>
               <dependencies>
                  <dependency resourceType="Peripheral" resourceId="UART0" description="Peripheral UART0 is not initialized" problem_level="1" source="Pins:BOARD_InitDEBUG_UART">
                     <feature name="initialized" evaluation="equal">
                        <data>true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UART">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.port" description="Pins initialization requires the PORT Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UART">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
               </dependencies>
               <pins>
                  <pin peripheral="UART0" signal="TX" pin_num="63" pin_signal="PTB17/SPI1_SIN/UART0_TX/FTM_CLKIN1/FB_AD16/EWM_OUT_b">
                     <pin_features>
                        <pin_feature name="direction" value="OUTPUT"/>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="down"/>
                        <pin_feature name="pull_enable" value="disable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="UART0" signal="RX" pin_num="62" pin_signal="PTB16/SPI1_SOUT/UART0_RX/FTM_CLKIN0/FB_AD17/EWM_IN">
                     <pin_features>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="down"/>
                        <pin_feature name="pull_enable" value="disable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
               </pins>
            </function>
            <function name="BOARD_InitOSC">
               <description>Configures pin routing and optionally pin electrical features.</description>
               <options>
                  <callFromInitBoot>false</callFromInitBoot>
                  <prefix>BOARD_</prefix>
                  <coreID>core0</coreID>
                  <enableClock>true</enableClock>
               </options>
               <dependencies>
                  <dependency resourceType="Peripheral" resourceId="OSC" description="Peripheral OSC is not initialized" problem_level="1" source="Pins:BOARD_InitOSC">
                     <feature name="initialized" evaluation="equal">
                        <data>true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="Peripheral" resourceId="RTC" description="Peripheral RTC is not initialized" problem_level="1" source="Pins:BOARD_InitOSC">
                     <feature name="initialized" evaluation="equal">
                        <data>true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitOSC">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.port" description="Pins initialization requires the PORT Driver in the project." problem_level="2" source="Pins:BOARD_InitOSC">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
               </dependencies>
               <pins>
                  <pin peripheral="OSC" signal="EXTAL0" pin_num="50" pin_signal="EXTAL0/PTA18/FTM0_FLT2/FTM_CLKIN0">
                     <pin_features>
                        <pin_feature name="identifier" value="EXTAL0"/>
                        <pin_feature name="slew_rate" value="no_init"/>
                        <pin_feature name="open_drain" value="no_init"/>
                        <pin_feature name="drive_strength" value="no_init"/>
                        <pin_feature name="pull_select" value="no_init"/>
                        <pin_feature name="pull_enable" value="no_init"/>
                        <pin_feature name="passive_filter" value="no_init"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="RTC" signal="EXTAL32" pin_num="29" pin_signal="EXTAL32"/>
                  <pin peripheral="RTC" signal="XTAL32" pin_num="28" pin_signal="XTAL32"/>
               </pins>
            </function>
            <function name="BOARD_InitACCEL">
               <description>Configures pin routing and optionally pin electrical features.</description>
               <options>
                  <callFromInitBoot>false</callFromInitBoot>
                  <prefix>BOARD_</prefix>
                  <coreID>core0</coreID>
                  <enableClock>true</enableClock>
               </options>
               <dependencies>
                  <dependency resourceType="Peripheral" resourceId="I2C0" description="Peripheral I2C0 is not initialized" problem_level="1" source="Pins:BOARD_InitACCEL">
                     <feature name="initialized" evaluation="equal">
                        <data>true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitACCEL">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.port" description="Pins initialization requires the PORT Driver in the project." problem_level="2" source="Pins:BOARD_InitACCEL">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.gpio" description="Pins initialization requires the GPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitACCEL">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
               </dependencies>
               <pins>
                  <pin peripheral="I2C0" signal="SDA" pin_num="32" pin_signal="ADC0_SE18/PTE25/UART4_RX/I2C0_SDA/EWM_IN">
                     <pin_features>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="enable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="up"/>
                        <pin_feature name="pull_enable" value="enable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="I2C0" signal="SCL" pin_num="31" pin_signal="ADC0_SE17/PTE24/UART4_TX/I2C0_SCL/EWM_OUT_b">
                     <pin_features>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="enable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="up"/>
                        <pin_feature name="pull_enable" value="enable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="GPIOC" signal="GPIO, 6" pin_num="78" pin_signal="CMP0_IN0/PTC6/LLWU_P10/SPI0_SOUT/PDB0_EXTRG/I2S0_RX_BCLK/FB_AD9/I2S0_MCLK">
                     <pin_features>
                        <pin_feature name="identifier" value="ACCEL_INT1"/>
                        <pin_feature name="direction" value="INPUT"/>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="enable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="up"/>
                        <pin_feature name="pull_enable" value="enable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="GPIOC" signal="GPIO, 13" pin_num="85" pin_signal="PTC13/UART4_CTS_b/FB_AD26">
                     <pin_features>
                        <pin_feature name="direction" value="INPUT"/>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="enable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="up"/>
                        <pin_feature name="pull_enable" value="enable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
               </pins>
            </function>
            <function name="BOARD_InitENET">
               <description>Configures pin routing and optionally pin electrical features.</description>
               <options>
                  <callFromInitBoot>false</callFromInitBoot>
                  <prefix>BOARD_</prefix>
                  <coreID>core0</coreID>
                  <enableClock>true</enableClock>
               </options>
               <dependencies>
                  <dependency resourceType="Peripheral" resourceId="ENET" description="Peripheral ENET is not initialized" problem_level="1" source="Pins:BOARD_InitENET">
                     <feature name="initialized" evaluation="equal">
                        <data>true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitENET">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.port" description="Pins initialization requires the PORT Driver in the project." problem_level="2" source="Pins:BOARD_InitENET">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
               </dependencies>
               <pins>
                  <pin peripheral="ENET" signal="RMII_MDC" pin_num="54" pin_signal="ADC0_SE9/ADC1_SE9/PTB1/I2C0_SDA/FTM1_CH1/RMII0_MDC/MII0_MDC/FTM1_QD_PHB">
                     <pin_features>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="down"/>
                        <pin_feature name="pull_enable" value="disable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="ENET" signal="RMII_MDIO" pin_num="53" pin_signal="ADC0_SE8/ADC1_SE8/PTB0/LLWU_P5/I2C0_SCL/FTM1_CH0/RMII0_MDIO/MII0_MDIO/FTM1_QD_PHA">
                     <pin_features>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="enable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="up"/>
                        <pin_feature name="pull_enable" value="enable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="ENET" signal="RMII_RXD0" pin_num="43" pin_signal="CMP2_IN1/PTA13/LLWU_P4/CAN0_RX/FTM1_CH1/RMII0_RXD0/MII0_RXD0/I2C2_SDA/I2S0_TX_FS/FTM1_QD_PHB">
                     <pin_features>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="down"/>
                        <pin_feature name="pull_enable" value="disable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="ENET" signal="RMII_RXD1" pin_num="42" pin_signal="CMP2_IN0/PTA12/CAN0_TX/FTM1_CH0/RMII0_RXD1/MII0_RXD1/I2C2_SCL/I2S0_TXD0/FTM1_QD_PHA">
                     <pin_features>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="down"/>
                        <pin_feature name="pull_enable" value="disable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="ENET" signal="RMII_RXER" pin_num="39" pin_signal="PTA5/USB_CLKIN/FTM0_CH2/RMII0_RXER/MII0_RXER/CMP2_OUT/I2S0_TX_BCLK/JTAG_TRST_b">
                     <pin_features>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="down"/>
                        <pin_feature name="pull_enable" value="disable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="ENET" signal="RMII_TXD0" pin_num="46" pin_signal="PTA16/SPI0_SOUT/UART0_CTS_b/UART0_COL_b/RMII0_TXD0/MII0_TXD0/I2S0_RX_FS/I2S0_RXD1">
                     <pin_features>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="down"/>
                        <pin_feature name="pull_enable" value="disable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="ENET" signal="RMII_TXD1" pin_num="47" pin_signal="ADC1_SE17/PTA17/SPI0_SIN/UART0_RTS_b/RMII0_TXD1/MII0_TXD1/I2S0_MCLK">
                     <pin_features>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="down"/>
                        <pin_feature name="pull_enable" value="disable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="ENET" signal="RMII_TXEN" pin_num="45" pin_signal="PTA15/SPI0_SCK/UART0_RX/RMII0_TXEN/MII0_TXEN/I2S0_RXD0">
                     <pin_features>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="down"/>
                        <pin_feature name="pull_enable" value="disable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="ENET" signal="RMII_CRS_DV" pin_num="44" pin_signal="PTA14/SPI0_PCS0/UART0_TX/RMII0_CRS_DV/MII0_RXDV/I2C2_SCL/I2S0_RX_BCLK/I2S0_TXD1">
                     <pin_features>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="down"/>
                        <pin_feature name="pull_enable" value="disable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="ENET" signal="RMII_CLKIN" pin_num="50" pin_signal="EXTAL0/PTA18/FTM0_FLT2/FTM_CLKIN0">
                     <pin_features>
                        <pin_feature name="identifier" value="RMII_RXCLK"/>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="down"/>
                        <pin_feature name="pull_enable" value="disable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
               </pins>
            </function>
            <function name="BOARD_InitSDHC">
               <description>Configures pin routing and optionally pin electrical features.</description>
               <options>
                  <callFromInitBoot>false</callFromInitBoot>
                  <prefix>BOARD_</prefix>
                  <coreID>core0</coreID>
                  <enableClock>true</enableClock>
               </options>
               <dependencies>
                  <dependency resourceType="Peripheral" resourceId="SDHC" description="Peripheral SDHC is not initialized" problem_level="1" source="Pins:BOARD_InitSDHC">
                     <feature name="initialized" evaluation="equal">
                        <data>true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitSDHC">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.port" description="Pins initialization requires the PORT Driver in the project." problem_level="2" source="Pins:BOARD_InitSDHC">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.gpio" description="Pins initialization requires the GPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitSDHC">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
               </dependencies>
               <pins>
                  <pin peripheral="SDHC" signal="DATA, 1" pin_num="1" pin_signal="ADC1_SE4a/PTE0/SPI1_PCS1/UART1_TX/SDHC0_D1/TRACE_CLKOUT/I2C1_SDA/RTC_CLKOUT">
                     <pin_features>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="high"/>
                        <pin_feature name="pull_select" value="up"/>
                        <pin_feature name="pull_enable" value="enable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="SDHC" signal="DATA, 0" pin_num="2" pin_signal="ADC1_SE5a/PTE1/LLWU_P0/SPI1_SOUT/UART1_RX/SDHC0_D0/TRACE_D3/I2C1_SCL/SPI1_SIN">
                     <pin_features>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="high"/>
                        <pin_feature name="pull_select" value="up"/>
                        <pin_feature name="pull_enable" value="enable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="SDHC" signal="DCLK" pin_num="3" pin_signal="ADC0_DP2/ADC1_SE6a/PTE2/LLWU_P1/SPI1_SCK/UART1_CTS_b/SDHC0_DCLK/TRACE_D2">
                     <pin_features>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="high"/>
                        <pin_feature name="pull_select" value="up"/>
                        <pin_feature name="pull_enable" value="enable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="SDHC" signal="CMD" pin_num="4" pin_signal="ADC0_DM2/ADC1_SE7a/PTE3/SPI1_SIN/UART1_RTS_b/SDHC0_CMD/TRACE_D1/SPI1_SOUT">
                     <pin_features>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="high"/>
                        <pin_feature name="pull_select" value="up"/>
                        <pin_feature name="pull_enable" value="enable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="SDHC" signal="DATA, 3" pin_num="5" pin_signal="PTE4/LLWU_P2/SPI1_PCS0/UART3_TX/SDHC0_D3/TRACE_D0">
                     <pin_features>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="high"/>
                        <pin_feature name="pull_select" value="up"/>
                        <pin_feature name="pull_enable" value="enable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="SDHC" signal="DATA, 2" pin_num="6" pin_signal="PTE5/SPI1_PCS2/UART3_RX/SDHC0_D2/FTM3_CH0">
                     <pin_features>
                        <pin_feature name="slew_rate" value="fast"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="high"/>
                        <pin_feature name="pull_select" value="up"/>
                        <pin_feature name="pull_enable" value="enable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
                  <pin peripheral="GPIOE" signal="GPIO, 6" pin_num="7" pin_signal="PTE6/SPI1_PCS3/UART3_CTS_b/I2S0_MCLK/FTM3_CH1/USB_SOF_OUT">
                     <pin_features>
                        <pin_feature name="direction" value="INPUT"/>
                        <pin_feature name="slew_rate" value="slow"/>
                        <pin_feature name="open_drain" value="disable"/>
                        <pin_feature name="drive_strength" value="low"/>
                        <pin_feature name="pull_select" value="down"/>
                        <pin_feature name="pull_enable" value="enable"/>
                        <pin_feature name="passive_filter" value="disable"/>
                     </pin_features>
                  </pin>
               </pins>
            </function>
            <function name="BOARD_InitUSB">
               <description>Configures pin routing and optionally pin electrical features.</description>
               <options>
                  <callFromInitBoot>false</callFromInitBoot>
                  <prefix>BOARD_</prefix>
                  <coreID>core0</coreID>
                  <enableClock>true</enableClock>
               </options>
               <dependencies>
                  <dependency resourceType="Peripheral" resourceId="USB0" description="Peripheral USB0 is not initialized" problem_level="1" source="Pins:BOARD_InitUSB">
                     <feature name="initialized" evaluation="equal">
                        <data>true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSB">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
               </dependencies>
               <pins>
                  <pin peripheral="USB0" signal="DP" pin_num="10" pin_signal="USB0_DP"/>
                  <pin peripheral="USB0" signal="DM" pin_num="11" pin_signal="USB0_DM"/>
               </pins>
            </function>
         </functions_list>
      </pins>
      <clocks name="Clocks" version="12.0" enabled="true" update_project_code="true">
         <generated_project_files>
            <file path="board/clock_config.c" update_enabled="true"/>
            <file path="board/clock_config.h" update_enabled="true"/>
         </generated_project_files>
         <clocks_profile>
            <processor_version>14.0.0</processor_version>
         </clocks_profile>
         <clock_configurations>
            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
               <description></description>
               <options/>
               <dependencies>
                  <dependency resourceType="PinSignal" resourceId="OSC.EXTAL0" description="&apos;EXTAL0&apos; (Pins tool id: OSC.EXTAL0, Clocks tool id: OSC.EXTAL0) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
                     <feature name="routed" evaluation="">
                        <data>true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="PinSignal" resourceId="OSC.EXTAL0" description="&apos;EXTAL0&apos; (Pins tool id: OSC.EXTAL0, Clocks tool id: OSC.EXTAL0) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
                     <feature name="direction" evaluation="">
                        <data>INPUT</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
               </dependencies>
               <clock_sources>
                  <clock_source id="OSC.OSC.outFreq" value="50 MHz" locked="false" enabled="true"/>
               </clock_sources>
               <clock_outputs>
                  <clock_output id="Bus_clock.outFreq" value="60 MHz" locked="false" accuracy=""/>
                  <clock_output id="CLKOUT.outFreq" value="40 MHz" locked="false" accuracy=""/>
                  <clock_output id="Core_clock.outFreq" value="120 MHz" locked="true" accuracy="0.001"/>
                  <clock_output id="ENET1588TSCLK.outFreq" value="50 MHz" locked="false" accuracy=""/>
                  <clock_output id="Flash_clock.outFreq" value="24 MHz" locked="false" accuracy=""/>
                  <clock_output id="FlexBus_clock.outFreq" value="40 MHz" locked="false" accuracy=""/>
                  <clock_output id="LPO_clock.outFreq" value="1 kHz" locked="false" accuracy=""/>
                  <clock_output id="MCGFFCLK.outFreq" value="1.5625 MHz" locked="false" accuracy=""/>
                  <clock_output id="MCGIRCLK.outFreq" value="2 MHz" locked="false" accuracy=""/>
                  <clock_output id="OSCERCLK.outFreq" value="50 MHz" locked="false" accuracy=""/>
                  <clock_output id="PLLFLLCLK.outFreq" value="120 MHz" locked="false" accuracy=""/>
                  <clock_output id="RMIICLK.outFreq" value="50 MHz" locked="false" accuracy=""/>
                  <clock_output id="SDHCCLK.outFreq" value="50 MHz" locked="false" accuracy=""/>
                  <clock_output id="System_clock.outFreq" value="120 MHz" locked="false" accuracy=""/>
                  <clock_output id="TRACECLKIN.outFreq" value="120 MHz" locked="false" accuracy=""/>
                  <clock_output id="USB48MCLK.outFreq" value="48 MHz" locked="false" accuracy=""/>
               </clock_outputs>
               <clock_settings>
                  <setting id="MCGMode" value="PEE" locked="false"/>
                  <setting id="CLKOUTConfig" value="yes" locked="false"/>
                  <setting id="ENETTimeSrcConfig" value="yes" locked="false"/>
                  <setting id="MCG.FRDIV.scale" value="32" locked="false"/>
                  <setting id="MCG.IRCS.sel" value="MCG.FCRDIV" locked="false"/>
                  <setting id="MCG.IREFS.sel" value="MCG.FRDIV" locked="false"/>
                  <setting id="MCG.PLLS.sel" value="MCG.PLL" locked="false"/>
                  <setting id="MCG.PRDIV.scale" value="15" locked="false"/>
                  <setting id="MCG.VDIV.scale" value="36" locked="false"/>
                  <setting id="MCG_C1_IRCLKEN_CFG" value="Enabled" locked="false"/>
                  <setting id="MCG_C2_RANGE0_CFG" value="Very_high" locked="false"/>
                  <setting id="MCG_C2_RANGE0_FRDIV_CFG" value="Very_high" locked="false"/>
                  <setting id="OSC_CR_ERCLKEN_CFG" value="Enabled" locked="false"/>
                  <setting id="RMIISrcConfig" value="yes" locked="false"/>
                  <setting id="RTCCLKOUTConfig" value="yes" locked="false"/>
                  <setting id="RTC_CR_OSCE_CFG" value="Enabled" locked="false"/>
                  <setting id="RTC_CR_OSC_CAP_LOAD_CFG" value="SC10PF" locked="false"/>
                  <setting id="SDHCClkConfig" value="yes" locked="false"/>
                  <setting id="SIM.OSC32KSEL.sel" value="RTC.RTC32KCLK" locked="false"/>
                  <setting id="SIM.OUTDIV2.scale" value="2" locked="false"/>
                  <setting id="SIM.OUTDIV3.scale" value="3" locked="false"/>
                  <setting id="SIM.OUTDIV4.scale" value="5" locked="false"/>
                  <setting id="SIM.PLLFLLSEL.sel" value="MCG.MCGPLLCLK" locked="false"/>
                  <setting id="SIM.RTCCLKOUTSEL.sel" value="RTC.RTC32KCLK" locked="false"/>
                  <setting id="SIM.SDHCSRCSEL.sel" value="OSC.OSCERCLK" locked="false"/>
                  <setting id="SIM.TIMESRCSEL.sel" value="OSC.OSCERCLK" locked="false"/>
                  <setting id="SIM.USBDIV.scale" value="5" locked="false"/>
                  <setting id="SIM.USBFRAC.scale" value="2" locked="false"/>
                  <setting id="SIM.USBSRCSEL.sel" value="SIM.USBDIV" locked="false"/>
                  <setting id="TraceClkConfig" value="yes" locked="false"/>
                  <setting id="USBClkConfig" value="yes" locked="false"/>
               </clock_settings>
               <called_from_default_init>false</called_from_default_init>
            </clock_configuration>
            <clock_configuration name="BOARD_BootClockVLPR" id_prefix="" prefix_user_defined="false">
               <description></description>
               <options/>
               <dependencies>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockVLPR">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.smc" description="Clocks initialization requires the SMC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockVLPR">
                     <feature name="enabled" evaluation="equal" configuration="core0">
                        <data>true</data>
                     </feature>
                  </dependency>
               </dependencies>
               <clock_sources>
                  <clock_source id="OSC.OSC.outFreq" value="50 MHz" locked="false" enabled="false"/>
               </clock_sources>
               <clock_outputs>
                  <clock_output id="Bus_clock.outFreq" value="4 MHz" locked="false" accuracy=""/>
                  <clock_output id="Core_clock.outFreq" value="4 MHz" locked="true" accuracy="0.001"/>
                  <clock_output id="Flash_clock.outFreq" value="800 kHz" locked="false" accuracy=""/>
                  <clock_output id="FlexBus_clock.outFreq" value="4 MHz" locked="false" accuracy=""/>
                  <clock_output id="LPO_clock.outFreq" value="1 kHz" locked="false" accuracy=""/>
                  <clock_output id="System_clock.outFreq" value="4 MHz" locked="false" accuracy=""/>
               </clock_outputs>
               <clock_settings>
                  <setting id="MCGMode" value="BLPI" locked="false"/>
                  <setting id="powerMode" value="VLPR" locked="false"/>
                  <setting id="MCG.CLKS.sel" value="MCG.IRCS" locked="false"/>
                  <setting id="MCG.FCRDIV.scale" value="1" locked="false"/>
                  <setting id="MCG.FRDIV.scale" value="32" locked="false"/>
                  <setting id="MCG.IRCS.sel" value="MCG.FCRDIV" locked="false"/>
                  <setting id="MCG_C2_RANGE0_CFG" value="Very_high" locked="false"/>
                  <setting id="MCG_C2_RANGE0_FRDIV_CFG" value="Very_high" locked="false"/>
                  <setting id="RTC_CR_OSCE_CFG" value="Enabled" locked="false"/>
                  <setting id="RTC_CR_OSC_CAP_LOAD_CFG" value="SC10PF" locked="false"/>
                  <setting id="SIM.OSC32KSEL.sel" value="RTC.RTC32KCLK" locked="false"/>
                  <setting id="SIM.OUTDIV3.scale" value="1" locked="false"/>
                  <setting id="SIM.OUTDIV4.scale" value="5" locked="false"/>
                  <setting id="SIM.PLLFLLSEL.sel" value="IRC48M.IRC48MCLK" locked="false"/>
                  <setting id="SIM.RTCCLKOUTSEL.sel" value="RTC.RTC32KCLK" locked="false"/>
               </clock_settings>
               <called_from_default_init>false</called_from_default_init>
            </clock_configuration>
         </clock_configurations>
      </clocks>
      <dcdx name="DCDx" version="3.0" enabled="false" update_project_code="true">
         <generated_project_files/>
         <dcdx_profile>
            <processor_version>0.0.0</processor_version>
         </dcdx_profile>
         <dcdx_configurations/>
      </dcdx>
      <periphs name="Peripherals" version="13.0" enabled="true" update_project_code="true">
         <dependencies>
            <dependency resourceType="SWComponent" resourceId="middleware.usb.common_header" description="USB Common Header is not found in the toolchain/IDE project. The project will not compile!" problem_level="2" source="Peripherals">
               <feature name="enabled" evaluation="equal">
                  <data type="Boolean">true</data>
               </feature>
            </dependency>
            <dependency resourceType="SWComponent" resourceId="middleware.usb.common_header" description="An unsupported version of the USB Common Header in the toolchain/IDE project. Required: ${required_value}, actual: ${actual_value}. The project might not compile correctly." problem_level="1" source="Peripherals">
               <feature name="version" evaluation="compatible">
                  <data type="Version">2.8.0</data>
               </feature>
            </dependency>
         </dependencies>
         <generated_project_files>
            <file path="board/peripherals.c" update_enabled="true"/>
            <file path="board/peripherals.h" update_enabled="true"/>
            <file path="source/generated/usb_device_composite.c" update_enabled="true"/>
            <file path="source/generated/usb_device_composite.h" update_enabled="true"/>
            <file path="source/generated/usb_device_config.h" update_enabled="true"/>
            <file path="source/generated/usb_device_descriptor.c" update_enabled="true"/>
            <file path="source/generated/usb_device_descriptor.h" update_enabled="true"/>
            <file path="source/usb_device_interface_0_cic_vcom.c" update_enabled="true"/>
            <file path="source/usb_device_interface_0_cic_vcom.h" update_enabled="true"/>
         </generated_project_files>
         <peripherals_profile>
            <processor_version>14.0.0</processor_version>
         </peripherals_profile>
         <functional_groups>
            <functional_group name="BOARD_InitPeripherals" uuid="a9140131-7ed9-4909-a4a4-202bd81c6834" called_from_default_init="true" id_prefix="" core="core0">
               <description></description>
               <options/>
               <dependencies>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.sysmpu" description="The sysmpu driver is missing in the project  (required for the System MPU initialization)." problem_level="2" source="Peripherals:BOARD_InitPeripherals">
                     <feature name="enabled" evaluation="equal">
                        <data type="Boolean">true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="middleware.usb.device_controller_khci" description="&quot;USB Device KHCI Controller Driver(FS)&quot; component is missing in the project." problem_level="2" source="Peripherals:BOARD_InitPeripherals">
                     <feature name="enabled" evaluation="equal">
                        <data type="Boolean">true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="&quot;Common&quot; driver is missing in the project." problem_level="2" source="Peripherals:BOARD_InitPeripherals">
                     <feature name="enabled" evaluation="equal">
                        <data type="Boolean">true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="ClockOutput" resourceId="USB48MCLK" description="USB Function Clock (USB48MCLK) is inactive and USB module will not work." problem_level="2" source="Peripherals:BOARD_InitPeripherals">
                     <feature name="frequency" evaluation="greaterThan">
                        <data type="Frequency" unit="Hz">0</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="middleware.usb.device.cdc.external" description="&quot;USB device CDC&quot; driver is missing in the project." problem_level="2" source="Peripherals:BOARD_InitPeripherals">
                     <feature name="enabled" evaluation="equal">
                        <data type="Boolean">true</data>
                     </feature>
                  </dependency>
                  <dependency resourceType="SWComponent" resourceId="middleware.usb.device.cdc.external" description="&quot;USB device CDC&quot; driver is missing in the project." problem_level="2" source="Peripherals:BOARD_InitPeripherals">
                     <feature name="enabled" evaluation="equal">
                        <data type="Boolean">true</data>
                     </feature>
                  </dependency>
               </dependencies>
               <instances>
                  <instance name="NVIC" uuid="e1a88231-4d9e-46a3-b134-d2c743110640" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
                     <config_set name="nvic">
                        <array name="interrupt_table"/>
                        <array name="interrupts"/>
                     </config_set>
                  </instance>
                  <instance name="UART0" uuid="7ecfeff3-a6de-43d3-9c43-9dfdbc237b35" type="uart" type_id="uart_9b45c456566d03f79ecfe90751c10bb4" mode="polling" peripheral="UART0" enabled="false" comment="" custom_name_enabled="false" editing_lock="false">
                     <config_set name="uartConfig_t" quick_selection="QuickSelection1">
                        <struct name="uartConfig">
                           <setting name="clockSource" value="BusInterfaceClock"/>
                           <setting name="clockSourceFreq" value="GetFreq"/>
                           <setting name="baudRate_Bps" value="115200"/>
                           <setting name="parityMode" value="kUART_ParityDisabled"/>
                           <setting name="dataBitsCount" value="kUART_EightDataBits"/>
                           <setting name="stopBitCount" value="kUART_OneStopBit"/>
                           <setting name="enableMatchAddress1" value="false"/>
                           <setting name="matchAddress1" value="0"/>
                           <setting name="enableMatchAddress2" value="false"/>
                           <setting name="matchAddress2" value="0"/>
                           <setting name="txFifoWatermark" value="0"/>
                           <setting name="rxFifoWatermark" value="1"/>
                           <setting name="idleType" value="kUART_IdleTypeStartBit"/>
                           <setting name="enableTx" value="true"/>
                           <setting name="enableRx" value="true"/>
                        </struct>
                     </config_set>
                  </instance>
                  <instance name="SYSMPU" uuid="1d744f82-13f4-414f-bfaa-2f30bd3d54e1" type="mpu_utility" type_id="mpu_utility_bc3ea1f6add76edb6050f698d423d163" mode="SYSMPU" peripheral="SYSMPU" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
                     <config_set name="sysmpu_init">
                        <setting name="mpuInit" value="disabled"/>
                     </config_set>
                  </instance>
                  <instance name="USB0" uuid="cc0eb411-8fed-4548-b79c-9a8340cc02fd" type="usb" type_id="usb_cbf31fb9a3cef21890d93e737c3d2690" mode="device" peripheral="USB0" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
                     <config_set name="deviceSetting" quick_selection="QS_DEVICE_CDC_VCOM">
                        <setting name="vendor_id" value="0x1FC9"/>
                        <setting name="product_id" value="0x0094"/>
                        <setting name="manufacturer_string" value="NXP"/>
                        <setting name="product_string" value="VCOM"/>
                        <setting name="self_powered" value="true"/>
                        <setting name="suspend_resume" value="false"/>
                        <setting name="max_power" value="100"/>
                        <array name="interfaces">
                           <struct name="0">
                              <setting name="interface_class" value="kClassCic"/>
                              <struct name="setting_cic" quick_selection="QS_INTERFACE_CIC_VCOM">
                                 <setting name="interface_name" value="CIC VCOM"/>
                                 <setting name="subclass" value="kSubclassAcm"/>
                                 <setting name="protocol" value="kProtocolNone"/>
                                 <setting name="implementation" value="kImplementationCicVcom"/>
                                 <array name="endpoints_settings">
                                    <struct name="0">
                                       <setting name="setting_name" value="Default"/>
                                       <array name="endpoints">
                                          <struct name="0">
                                             <setting name="direction" value="kIn"/>
                                             <setting name="transfer_type" value="kInterrupt"/>
                                             <setting name="synchronization" value="kNoSynchronization"/>
                                             <setting name="usage" value="kData"/>
                                             <setting name="max_packet_size_fs" value="k16"/>
                                             <setting name="polling_interval_fs" value="8"/>
                                             <setting name="bRefresh" value="0"/>
                                             <setting name="bSynchAddress" value="NoSynchronization"/>
                                          </struct>
                                       </array>
                                    </struct>
                                 </array>
                                 <setting name="data_interface_count" value="1"/>
                              </struct>
                           </struct>
                           <struct name="1">
                              <setting name="interface_class" value="kClassDic"/>
                              <struct name="setting_dic" quick_selection="QS_INTERFACE_DIC_VCOM">
                                 <setting name="interface_name" value="DIC VCOM"/>
                                 <setting name="subclass" value="kSubclassNone"/>
                                 <setting name="protocol" value="kProtocolNone"/>
                                 <setting name="implementation" value="kImplementationDicVcom"/>
                                 <array name="endpoints_settings">
                                    <struct name="0">
                                       <setting name="setting_name" value="Default"/>
                                       <array name="endpoints">
                                          <struct name="0">
                                             <setting name="direction" value="kIn"/>
                                             <setting name="transfer_type" value="kBulk"/>
                                             <setting name="synchronization" value="kNoSynchronization"/>
                                             <setting name="usage" value="kData"/>
                                             <setting name="max_packet_size_fs" value="k64"/>
                                             <setting name="polling_interval_fs" value="0"/>
                                             <setting name="bRefresh" value="0"/>
                                             <setting name="bSynchAddress" value="NoSynchronization"/>
                                          </struct>
                                          <struct name="1">
                                             <setting name="direction" value="kOut"/>
                                             <setting name="transfer_type" value="kBulk"/>
                                             <setting name="synchronization" value="kNoSynchronization"/>
                                             <setting name="usage" value="kData"/>
                                             <setting name="max_packet_size_fs" value="k64"/>
                                             <setting name="polling_interval_fs" value="0"/>
                                             <setting name="bRefresh" value="0"/>
                                             <setting name="bSynchAddress" value="NoSynchronization"/>
                                          </struct>
                                       </array>
                                    </struct>
                                 </array>
                              </struct>
                           </struct>
                        </array>
                     </config_set>
                     <config_set name="commonSettings">
                        <struct name="mpu_init">
                           <setting name="mpu_init_component" value="SYSMPU"/>
                        </struct>
                     </config_set>
                  </instance>
               </instances>
            </functional_group>
         </functional_groups>
         <components>
            <component name="system" uuid="f2b23d9d-334e-403a-a940-5a1f8e4a6e3f" type_id="system_54b53072540eeeb8f8e9343e71f28176">
               <config_set_global name="global_system_definitions">
                  <setting name="user_definitions" value=""/>
                  <setting name="user_includes" value=""/>
               </config_set_global>
            </component>
            <component name="msg" uuid="314839b2-20bd-4633-a78b-b9a907d37e75" type_id="msg_6e2baaf3b97dbeef01c0043275f9a0e7">
               <config_set_global name="global_messages"/>
            </component>
            <component name="gpio_adapter_common" uuid="91630462-4f6c-4ce1-bc31-8525c25dfb6a" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
            </component>
            <component name="generic_uart" uuid="3460120c-749d-46df-afa7-f8b75491d155" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
               <config_set_global name="global_uart"/>
            </component>
            <component name="generic_can" uuid="340e8605-0f8c-44e7-893f-099e6aba3723" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
               <config_set_global name="global_can"/>
            </component>
            <component name="uart_cmsis_common" uuid="dfb70626-d825-437a-bfe0-cd0bfc23485b" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
            </component>
            <component name="generic_enet" uuid="8c54bd92-b658-48de-8726-47edbf90bf20" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
               <config_set_global name="global_enet"/>
            </component>
         </components>
      </periphs>
      <tee name="TEE" version="5.0" enabled="false" update_project_code="true">
         <generated_project_files/>
         <tee_profile>
            <processor_version>0.0.0</processor_version>
         </tee_profile>
      </tee>
      <common name="common" version="1.0" enabled="true" update_project_code="true">
         <core name="core0" role="primary" project_name="Project"/>
      </common>
   </tools>
</configuration>