tinyUSB/hw/bsp/ch32v20x/boards/ch32v203c_r0_1v0/board.h

/* metadata:
   name: CH32V203C-R0-1v0
   url: https://github.com/openwch/ch32v20x/tree/main/SCHPCB/CH32V203C-R0
*/

#ifndef BOARD_H_
#define BOARD_H_

#ifdef __cplusplus
extern "C" {
#endif

#define LED_PORT       GPIOA
#define LED_PIN        GPIO_Pin_0
#define LED_STATE_ON   0
#define LED_CLOCK_EN() RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE)
#define LED_MODE       GPIO_Mode_Out_OD

#define UART_DEV        USART1
#define UART_CLOCK_EN() RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE)
#define UART_TX_PIN     GPIO_Pin_9
#define UART_RX_PIN     GPIO_Pin_10

#ifdef __cplusplus
}
#endif

#endif
embed metadata to family.c and board.h to generate supported boards doc 2024-12-27 09:11:09 +07:00			`/* metadata:`
			`name: CH32V203C-R0-1v0`
			`url: https://github.com/openwch/ch32v20x/tree/main/SCHPCB/CH32V203C-R0`
			`*/`

- update ch203 family to allow to specify flash and ram size. Introduce - add ch32v203_ro_1v0 board - CFG_EXAMPLE_MSC_DUAL_READONLY to build msc_dual_lun for ch32v203 2024-05-20 13:24:24 +07:00			`#ifndef BOARD_H_`
			`#define BOARD_H_`

			`#ifdef __cplusplus`
			`extern "C" {`
			`#endif`

			`#define LED_PORT GPIOA`
add board_reset_to_bootloader(), try to implement that for ch32v203 but not working yet 2024-07-05 15:40:02 +07:00			`#define LED_PIN GPIO_Pin_0`
- update ch203 family to allow to specify flash and ram size. Introduce - add ch32v203_ro_1v0 board - CFG_EXAMPLE_MSC_DUAL_READONLY to build msc_dual_lun for ch32v203 2024-05-20 13:24:24 +07:00			`#define LED_STATE_ON 0`
Allow different port and mode for LED on ch32v boards While there is a define for the port, the clock enable is hardcoded for GPIOA, so setting a different port than GPIOA doesn't work. This fixes it by adding a define for enabling the port clock. It also adds a define for the pin mode, because not all boards have the LED connected in a way that open drain works with it. 2025-03-07 12:20:33 +01:00			`#define LED_CLOCK_EN() RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE)`
			`#define LED_MODE GPIO_Mode_Out_OD`
- update ch203 family to allow to specify flash and ram size. Introduce - add ch32v203_ro_1v0 board - CFG_EXAMPLE_MSC_DUAL_READONLY to build msc_dual_lun for ch32v203 2024-05-20 13:24:24 +07:00
add new ch32v203g6u board, sysfreq is defined in board.cmake/mk 2024-06-21 16:08:37 +07:00			`#define UART_DEV USART1`
			`#define UART_CLOCK_EN() RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE)`
			`#define UART_TX_PIN GPIO_Pin_9`
			`#define UART_RX_PIN GPIO_Pin_10`

- update ch203 family to allow to specify flash and ram size. Introduce - add ch32v203_ro_1v0 board - CFG_EXAMPLE_MSC_DUAL_READONLY to build msc_dual_lun for ch32v203 2024-05-20 13:24:24 +07:00			`#ifdef __cplusplus`
			`}`
			`#endif`

			`#endif`