tinyUSB/hw/bsp/lpc40/family.mk

DEPS_SUBMODULES += hw/mcu/nxp/lpcopen

MCU_DIR = hw/mcu/nxp/lpcopen/lpc40xx/lpc_chip_40xx
include $(TOP)/$(BOARD_PATH)/board.mk
CPU_CORE ?= cortex-m4

CFLAGS += \
  -flto \
  -nostdlib \
  -DCORE_M4 \
  -D__USE_LPCOPEN \
  -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \
  -DCFG_TUSB_MCU=OPT_MCU_LPC40XX

# mcu driver cause following warnings
CFLAGS_GCC += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=cast-qual

LDFLAGS_GCC += --specs=nosys.specs --specs=nano.specs

# All source paths should be relative to the top level.
SRC_C += \
	src/portable/nxp/lpc17_40/dcd_lpc17_40.c \
	src/portable/nxp/lpc17_40/hcd_lpc17_40.c \
	src/portable/ohci/ohci.c \
	$(MCU_DIR)/../gcc/cr_startup_lpc40xx.c \
	$(MCU_DIR)/src/chip_17xx_40xx.c \
	$(MCU_DIR)/src/clock_17xx_40xx.c \
	$(MCU_DIR)/src/fpu_init.c \
	$(MCU_DIR)/src/gpio_17xx_40xx.c \
	$(MCU_DIR)/src/iocon_17xx_40xx.c \
	$(MCU_DIR)/src/sysctl_17xx_40xx.c \
	$(MCU_DIR)/src/sysinit_17xx_40xx.c \
	$(MCU_DIR)/src/uart_17xx_40xx.c \

INC += \
	$(TOP)/$(MCU_DIR)/inc \
	$(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
	$(TOP)/$(BOARD_PATH)
add nxp_lpcopen as submodule 2021-04-28 18:11:49 +07:00			`DEPS_SUBMODULES += hw/mcu/nxp/lpcopen`
merge no-family example build specify FAMILY_SUBMODULES for all boards 2021-03-04 22:50:45 +07:00
add lpc40 to cmake 2023-07-24 15:18:41 +07:00			`MCU_DIR = hw/mcu/nxp/lpcopen/lpc40xx/lpc_chip_40xx`
			`include $(TOP)/$(BOARD_PATH)/board.mk`
			`CPU_CORE ?= cortex-m4`

ea4088 quickstart build with makefile 2019-05-15 17:24:21 +07:00			`CFLAGS += \`
move -flto to board.mk current board that doesn work with flto is spresense and mimxrt10xx (due to xip image_vector_table is optimized out). 2019-11-20 16:06:40 +07:00			`-flto \`
ea4088 quickstart build with makefile 2019-05-15 17:24:21 +07:00			`-nostdlib \`
			`-DCORE_M4 \`
revert to use __USE_LPCOPEN properly init fpu on LPC M4 2020-09-03 12:58:09 +07:00			`-D__USE_LPCOPEN \`
rename CFG_TUSB_MEM_SECTION to CFG_TUD_MEM_SECTION in device stack CFG_TUD_MEM_SECTION is default to CFG_TUSB_MEM_SECTION 2023-07-24 15:46:21 +07:00			`-DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \`
revert to use float-abi define __USE_CMSIS instead of __USE_LPCOPEN will have startup enable FPU on startup properly. Although it is only relevant to lpx43/40 series, change all to __USE_CMSIS for consistency 2020-09-02 00:46:08 +07:00			`-DCFG_TUSB_MCU=OPT_MCU_LPC40XX`
ea4088 quickstart build with makefile 2019-05-15 17:24:21 +07:00
add -Wextra for more warnings to example non-stack warning (probably mcu driver) should be suppressed in the board.mk 2019-09-27 00:15:43 +07:00			`# mcu driver cause following warnings`
fix iar make build with wb and u5 2025-04-17 14:34:55 +07:00			`CFLAGS_GCC += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=cast-qual`
adding lpcxpresso11u37 board 2019-09-06 15:06:04 +07:00
fix make build due to clang changes 2024-04-24 22:41:22 +07:00			`LDFLAGS_GCC += --specs=nosys.specs --specs=nano.specs`
make nanolib linking explicitly by each family/board 2023-11-23 12:43:13 +07:00
ea4088 quickstart build with makefile 2019-05-15 17:24:21 +07:00			`# All source paths should be relative to the top level.`
			`SRC_C += \`
explicitly add dcd source file without vendor/family 2021-03-17 16:52:07 +07:00			`src/portable/nxp/lpc17_40/dcd_lpc17_40.c \`
More ci tweak (#2636) * change concurrency group to ${{ github.workflow }}-${{ github.ref }} * use argparse for build.py hil_test.py, remove the need to install click * move ci win/mac to build_cmake.yml * rename build_family.yml to build_util.yml * build_util.yml support esp32 * integrate build-espressif into build.yml * build.py support make with --board option * add get_deps action * update hil test to reuse action 2024-05-10 18:55:43 +07:00			`src/portable/nxp/lpc17_40/hcd_lpc17_40.c \`
			`src/portable/ohci/ohci.c \`
clean up lpc makefile 2019-09-09 12:39:58 +07:00			`$(MCU_DIR)/../gcc/cr_startup_lpc40xx.c \`
			`$(MCU_DIR)/src/chip_17xx_40xx.c \`
			`$(MCU_DIR)/src/clock_17xx_40xx.c \`
add lpc40 to cmake 2023-07-24 15:18:41 +07:00			`$(MCU_DIR)/src/fpu_init.c \`
clean up lpc makefile 2019-09-09 12:39:58 +07:00			`$(MCU_DIR)/src/gpio_17xx_40xx.c \`
			`$(MCU_DIR)/src/iocon_17xx_40xx.c \`
			`$(MCU_DIR)/src/sysctl_17xx_40xx.c \`
			`$(MCU_DIR)/src/sysinit_17xx_40xx.c \`
revert to use __USE_LPCOPEN properly init fpu on LPC M4 2020-09-03 12:58:09 +07:00			`$(MCU_DIR)/src/uart_17xx_40xx.c \`
ea4088 quickstart build with makefile 2019-05-15 17:24:21 +07:00
			`INC += \`
add lpc40 to cmake 2023-07-24 15:18:41 +07:00			`$(TOP)/$(MCU_DIR)/inc \`
fix make build due to clang changes 2024-04-24 22:41:22 +07:00			`$(TOP)/lib/CMSIS_5/CMSIS/Core/Include \`
add lpc40 to cmake 2023-07-24 15:18:41 +07:00			`$(TOP)/$(BOARD_PATH)`