tinyUSB/hw/bsp/lpcxpresso1347/board_lpcxpresso1347.c

/* 
 * The MIT License (MIT)
 *
 * Copyright (c) 2018, hathach (tinyusb.org)
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 *
 * This file is part of the TinyUSB stack.
 */

#ifdef BOARD_LPCXPRESSO1347

#include "chip.h"
#include "../board.h"

#define LED_PORT    0
#define LED_PIN     7

static const struct {
  uint8_t port;
  uint8_t pin;
} buttons[] =
{
    {1, 22 }, // Joystick up
    {1, 20 }, // Joystick down
    {1, 23 }, // Joystick left
    {1, 21 }, // Joystick right
    {1, 19 }, // Joystick press
    {0, 1  }, // SW3
//    {1, 4  }, // SW4 (require to remove J28)
};

enum {
  BOARD_BUTTON_COUNT = sizeof(buttons) / sizeof(buttons[0])
};

/* System oscillator rate and RTC oscillator rate */
const uint32_t OscRateIn = 12000000;
const uint32_t ExtRateIn = 0;

/* Pin muxing table, only items that need changing from their default pin
   state are in this table. */
static const PINMUX_GRP_T pinmuxing[] = 
{
  {0,  1,  (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)},	/* PIO0_1 used for CLKOUT */
  {0,  2,  (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_PULLUP)},	/* PIO0_2 used for SSEL */
  {0,  3,  (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)},	/* PIO0_3 used for USB_VBUS */
  {0,  6,  (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)},	/* PIO0_6 used for USB_CONNECT */
  {0,  8,  (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)},	/* PIO0_8 used for MISO0 */
  {0,  9,  (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)},	/* PIO0_9 used for MOSI0 */
  {0,  11, (IOCON_FUNC2 | IOCON_ADMODE_EN      | IOCON_FILT_DIS)},	/* PIO0_11 used for AD0 */
  {0,  18, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)},	/* PIO0_18 used for RXD */
  {0,  19, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)},	/* PIO0_19 used for TXD */
  {1,  29, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)},	/* PIO1_29 used for SCK0 */
};

// Invoked by startup code
void SystemInit(void)
{
  /* Enable IOCON clock */
  Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON);
  Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T));
  Chip_SetupXtalClocking();
}

void board_init(void)
{
  SystemCoreClockUpdate();

#if CFG_TUSB_OS == OPT_OS_NONE
  SysTick_Config(SystemCoreClock / BOARD_TICKS_HZ); // 1 msec tick timer
#endif

  Chip_GPIO_Init(LPC_GPIO_PORT);

  //------------- LED -------------//
  Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, LED_PORT, LED_PIN);

  //------------- BUTTON -------------//
//  for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++) GPIOSetDir(buttons[i].port, TU_BIT(buttons[i].pin), 0);

  //------------- UART -------------//
  //UARTInit(CFG_UART_BAUDRATE);

  // USB
  Chip_USB_Init(); // Setup PLL clock, and power
}

/*------------------------------------------------------------------*/
/* TUSB HAL MILLISECOND
 *------------------------------------------------------------------*/
#if CFG_TUSB_OS == OPT_OS_NONE

volatile uint32_t system_ticks = 0;

void SysTick_Handler (void)
{
  system_ticks++;
}

uint32_t tusb_hal_millis(void)
{
  return board_tick2ms(system_ticks);
}

#endif

//--------------------------------------------------------------------+
// LEDS
//--------------------------------------------------------------------+
void board_led_control(bool state)
{
  Chip_GPIO_SetPinState(LPC_GPIO_PORT, LED_PORT, LED_PIN, state);
}


//--------------------------------------------------------------------+
// BUTTONS
//--------------------------------------------------------------------+
#if 0
static bool button_read(uint8_t id)
{
  (void) id;
//  return !GPIOGetPinValue(buttons[id].port, buttons[id].pin); // button is active low
  return 0;
}
#endif

uint32_t board_buttons(void)
{
  uint32_t result = 0;

//  for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++) result |= (button_read(i) ? TU_BIT(i) : 0);

  return result;
}

//--------------------------------------------------------------------+
// UART
//--------------------------------------------------------------------+
int board_uart_read(uint8_t* buf, int len)
{
  (void) buf;
  (void) len;
  return 0;
}

int board_uart_write(void const * buf, int len)
{
//  UARTSend(&c, 1);
  (void) buf;
  (void) len;
  return 0;
}

#endif