tinyUSB/hw/bsp/mcx/drivers/spc/fsl_spc.h

/*
 * Copyright 2022-2024 NXP
 * All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#ifndef FSL_SPC_H_
#define FSL_SPC_H_
#include "fsl_common.h"

/*!
 * @addtogroup mcx_spc
 * @{
 */

/*******************************************************************************
 * Definitions
 ******************************************************************************/

/*! @name Driver version */
/*! @{ */
/*! @brief SPC driver version 2.4.2. */
#define FSL_SPC_DRIVER_VERSION (MAKE_VERSION(2, 4, 2))
/*! @} */

#define SPC_EVD_CFG_REG_EVDISO_SHIFT   0UL
#define SPC_EVD_CFG_REG_EVDLPISO_SHIFT 8UL
#define SPC_EVD_CFG_REG_EVDSTAT_SHIFT  16UL

#define SPC_EVD_CFG_REG_EVDISO(x)   ((uint32_t)(x) << SPC_EVD_CFG_REG_EVDISO_SHIFT)
#define SPC_EVD_CFG_REG_EVDLPISO(x) ((uint32_t)(x) << SPC_EVD_CFG_REG_EVDLPISO_SHIFT)
#define SPC_EVD_CFG_REG_EVDSTAT(x)  ((uint32_t)(x) << SPC_EVD_CFG_REG_EVDSTAT_SHIFT)

#if (defined(SPC_GLITCH_DETECT_SC_CNT_SELECT_MASK))
#define VDD_CORE_GLITCH_DETECT_SC                             GLITCH_DETECT_SC
#define SPC_VDD_CORE_GLITCH_DETECT_SC_GLITCH_DETECT_FLAG_MASK SPC_GLITCH_DETECT_SC_GLITCH_DETECT_FLAG_MASK
#define SPC_VDD_CORE_GLITCH_DETECT_SC_GLITCH_DETECT_FLAG      SPC_GLITCH_DETECT_SC_GLITCH_DETECT_FLAG
#define SPC_VDD_CORE_GLITCH_DETECT_SC_LOCK_MASK               SPC_GLITCH_DETECT_SC_LOCK_MASK
#define SPC_VDD_CORE_GLITCH_DETECT_SC_CNT_SELECT_MASK         SPC_GLITCH_DETECT_SC_CNT_SELECT_MASK
#define SPC_VDD_CORE_GLITCH_DETECT_SC_CNT_SELECT              SPC_GLITCH_DETECT_SC_CNT_SELECT
#define SPC_VDD_CORE_GLITCH_DETECT_SC_RE_MASK                 SPC_GLITCH_DETECT_SC_RE_MASK
#define SPC_VDD_CORE_GLITCH_DETECT_SC_RE                      SPC_GLITCH_DETECT_SC_RE
#define SPC_VDD_CORE_GLITCH_DETECT_SC_TIMEOUT_MASK            SPC_GLITCH_DETECT_SC_TIMEOUT_MASK
#define SPC_VDD_CORE_GLITCH_DETECT_SC_TIMEOUT                 SPC_GLITCH_DETECT_SC_TIMEOUT
#define SPC_VDD_CORE_GLITCH_DETECT_SC_IE_MASK                 SPC_GLITCH_DETECT_SC_IE_MASK
#define SPC_VDD_CORE_GLITCH_DETECT_SC_IE                      SPC_GLITCH_DETECT_SC_IE
#endif

/*!
 * @brief SPC status enumeration.
 *
 * @note Some device(such as MCXA family) do not equip DCDC or System LDO, please refer to the reference manual
 * to check.
 */
enum
{
    kStatus_SPC_Busy = MAKE_STATUS(kStatusGroup_SPC, 0U), /*!< The SPC instance is busy executing any
                                                                type of power mode transition. */
#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC)
    kStatus_SPC_DCDCLowDriveStrengthIgnore = MAKE_STATUS(kStatusGroup_SPC, 1U), /*!< DCDC Low drive strength setting be
                                                                                    ignored for LVD/HVD enabled. */
    kStatus_SPC_DCDCPulseRefreshModeIgnore = MAKE_STATUS(kStatusGroup_SPC, 2U), /*!< DCDC Pulse Refresh Mode drive
                                                                    strength setting be ignored for LVD/HVD enabled. */
#endif                                                                          /* FSL_FEATURE_MCX_SPC_HAS_DCDC */
#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO)
    kStatus_SPC_SYSLDOOverDriveVoltageFail = MAKE_STATUS(kStatusGroup_SPC, 3U), /*!< SYS LDO regulate to Over drive
                                                                    voltage failed for SYS LDO HVD must be disabled. */
    kStatus_SPC_SYSLDOLowDriveStrengthIgnore = MAKE_STATUS(kStatusGroup_SPC, 4U),  /*!< SYS LDO Low driver strength
                                                                        setting be ignored for LDO LVD/HVD enabled. */
#endif                                                                             /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */
    kStatus_SPC_CORELDOLowDriveStrengthIgnore = MAKE_STATUS(kStatusGroup_SPC, 5U), /*!< CORE LDO Low driver strength
                                                                        setting be ignored for LDO LVD/HVD enabled. */
    kStatus_SPC_CORELDOVoltageWrong   = MAKE_STATUS(kStatusGroup_SPC, 7U),         /*!< Core LDO voltage is wrong. */
    kStatus_SPC_CORELDOVoltageSetFail = MAKE_STATUS(kStatusGroup_SPC, 8U),         /*!< Core LDO voltage set fail. */
    kStatus_SPC_BandgapModeWrong      = MAKE_STATUS(kStatusGroup_SPC, 6U),         /*!< Selected Bandgap Mode wrong. */
};

/*!
 * @brief Voltage Detect Status Flags.
 */
enum _spc_voltage_detect_flags
{
#if (defined(FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD) && FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD)
    kSPC_IOVDDHighVoltageDetectFlag = SPC_VD_STAT_IOVDD_HVDF_MASK,      /*!< IO VDD High-Voltage detect flag. */
    kSPC_IOVDDLowVoltageDetectFlag  = SPC_VD_STAT_IOVDD_LVDF_MASK,      /*!< IO VDD Low-Voltage detect flag. */
#endif                                                                  /* FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD */
    kSPC_SystemVDDHighVoltageDetectFlag = SPC_VD_STAT_SYSVDD_HVDF_MASK, /*!< System VDD High-Voltage detect flag. */
    kSPC_SystemVDDLowVoltageDetectFlag  = SPC_VD_STAT_SYSVDD_LVDF_MASK, /*!< System VDD Low-Voltage detect flag. */
#if (defined(FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD) && FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD)
    kSPC_CoreVDDHighVoltageDetectFlag = SPC_VD_STAT_COREVDD_HVDF_MASK,  /*!< Core VDD High-Voltage detect flag. */
#endif                                                                  /* FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD */
    kSPC_CoreVDDLowVoltageDetectFlag = SPC_VD_STAT_COREVDD_LVDF_MASK,   /*!< Core VDD Low-Voltage detect flag. */
};

/*!
 * @brief SPC power domain isolation status.
 * @note Some devices(such as MCXA family) do not contain WAKE Power Domain, please refer to the reference manual to
 * check.
 */
enum _spc_power_domains
{
    kSPC_MAINPowerDomainRetain = 1UL << 16U, /*!< Peripherals and IO pads retain in MAIN Power Domain. */
    kSPC_WAKEPowerDomainRetain = 1UL << 17U, /*!< Peripherals and IO pads retain in WAKE Power Domain. */
};

/*!
 * @brief The enumeration of all analog module that can be controlled by SPC in active or low-power modes.
 * @anchor spc_analog_module_control
 */
enum _spc_analog_module_control
{
    kSPC_controlVref       = 1UL << 0UL,  /*!< Enable/disable VREF in active or low-power modes. */
    kSPC_controlUsb3vDet   = 1UL << 1UL,  /*!< Enable/disable USB3V_Det in active or low-power modes. */
    kSPC_controlDac0       = 1UL << 4UL,  /*!< Enable/disable DAC0 in active or low-power modes. */
    kSPC_controlDac1       = 1UL << 5UL,  /*!< Enable/disable DAC1 in active or low-power modes.  */
    kSPC_controlDac2       = 1UL << 6UL,  /*!< Enable/disable DAC2 in active or low-power modes. */
    kSPC_controlOpamp0     = 1UL << 8UL,  /*!< Enable/disable OPAMP0 in active or low-power modes. */
    kSPC_controlOpamp1     = 1UL << 9UL,  /*!< Enable/disable OPAMP1 in active or low-power modes. */
    kSPC_controlOpamp2     = 1UL << 10UL, /*!< Enable/disable OPAMP2 in active or low-power modes. */
    kSPC_controlCmp0       = 1UL << 16UL, /*!< Enable/disable CMP0 in active or low-power modes. */
    kSPC_controlCmp1       = 1UL << 17UL, /*!< Enable/disable CMP1 in active or low-power modes. */
    kSPC_controlCmp2       = 1UL << 18UL, /*!< Enable/disable CMP2 in active or low-power modes. */
    kSPC_controlCmp0Dac    = 1UL << 20UL, /*!< Enable/disable CMP0_DAC in active or low-power modes. */
    kSPC_controlCmp1Dac    = 1UL << 21UL, /*!< Enable/disable CMP1_DAC in active or low-power modes. */
    kSPC_controlCmp2Dac    = 1UL << 22UL, /*!< Enable/disable CMP2_DAC in active or low-power modes. */
    kSPC_controlAllModules = 0x770773UL,  /*!< Enable/disable all modules in active or low-power modes. */
};

/*!
 * @brief The enumeration of spc power domain, the connected power domain is chip specific, please refer to chip's RM
 * for details.
 */
typedef enum _spc_power_domain_id
{
    kSPC_PowerDomain0 = 0U, /*!< Power domain0, the connected power domain is chip specific. */
    kSPC_PowerDomain1 = 1U, /*!< Power domain1, the connected power domain is chip specific. */
} spc_power_domain_id_t;

/*!
 * @brief The enumeration of Power domain's low power mode.
 */
typedef enum _spc_power_domain_low_power_mode
{
    kSPC_SleepWithSYSClockRunning     = 0U, /*!< Power domain request SLEEP mode with SYS clock running. */
    kSPC_DeepSleepWithSysClockOff     = 1U, /*!< Power domain request deep sleep mode with system clock off. */
    kSPC_PowerDownWithSysClockOff     = 2U, /*!< Power domain request power down mode with system clock off. */
    kSPC_DeepPowerDownWithSysClockOff = 4U, /*!< Power domain request deep power down mode with system clock off. */
} spc_power_domain_low_power_mode_t;

/*!
 * @brief SPC low power request output pin polarity.
 */
typedef enum _spc_lowPower_request_pin_polarity
{
    kSPC_HighTruePolarity = 0x0U, /*!< Control the High Polarity of the Low Power Request Pin. */
    kSPC_LowTruePolarity  = 0x1U, /*!< Control the Low Polarity of the Low Power Request Pin. */
} spc_lowpower_request_pin_polarity_t;

/*!
 * @brief SPC low power request output override.
 */
typedef enum _spc_lowPower_request_output_override
{
    kSPC_LowPowerRequestNotForced  = 0x0U, /*!< Not Forced. */
    kSPC_LowPowerRequestReserved   = 0x1U, /*!< Reserved. */
    kSPC_LowPowerRequestForcedLow  = 0x2U, /*!< Forced Low (Ignore LowPower request output polarity setting.) */
    kSPC_LowPowerRequestForcedHigh = 0x3U, /*!< Forced High (Ignore LowPower request output polarity setting.) */
} spc_lowpower_request_output_override_t;

/*!
 * @brief SPC Bandgap mode enumeration in Active mode or Low Power mode.
 */
typedef enum _spc_bandgap_mode
{
    kSPC_BandgapDisabled              = 0x0U, /*!< Bandgap disabled. */
    kSPC_BandgapEnabledBufferDisabled = 0x1U, /*!< Bandgap enabled with Buffer disabled. */
    kSPC_BandgapEnabledBufferEnabled  = 0x2U, /*!< Bandgap enabled with Buffer enabled. */
    kSPC_BandgapReserved              = 0x3U, /*!< Reserved. */
} spc_bandgap_mode_t;

#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC)
/*!
 * @brief DCDC regulator voltage level enumeration in Active mode or Low Power Mode.
 *
 * @note #kSPC_DCDC_RetentionVoltage not supported for all power modes.
 */
typedef enum _spc_dcdc_voltage_level
{
    kSPC_DCDC_RetentionVoltage = 0x0U, /*!< DCDC_CORE Regulator regulate to retention
                                           Voltage(Only supportedin low power modes) */
    kSPC_DCDC_MidVoltage       = 0x1U, /*!< DCDC_CORE Regulator regulate to Mid Voltage(1.0V). */
    kSPC_DCDC_NormalVoltage    = 0x2U, /*!< DCDC_CORE Regulator regulate to Normal Voltage(1.1V). */
    kSPC_DCDC_OverdriveVoltage = 0x3U, /*!< DCDC_CORE Regulator regulate to Safe-Mode Voltage(1.2V). */
} spc_dcdc_voltage_level_t;

/*!
 * @brief DCDC regulator Drive Strength enumeration in Active mode or Low Power Mode.
 *
 * @note Different drive strength differ in these DCDC characteristics:
 *              Maximum load current
 *              Quiescent current
 *              Transient response.
 */
typedef enum _spc_dcdc_drive_strength
{
    kSPC_DCDC_PulseRefreshMode = 0x0U,    /*!< DCDC_CORE Regulator Drive Strength set to Pulse Refresh Mode,
                                           * This enum member is only useful for Low Power Mode config, please
                                           * note that pulse refresh mode is invalid in SLEEP mode.
                                           */
    kSPC_DCDC_LowDriveStrength    = 0x1U, /*!< DCDC_CORE regulator Drive Strength set to low. */
    kSPC_DCDC_NormalDriveStrength = 0x2U, /*!< DCDC_CORE regulator Drive Strength set to Normal. */
} spc_dcdc_drive_strength_t;
#endif                                    /* FSL_FEATURE_MCX_SPC_HAS_DCDC */

#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO)
/*!
 * @brief SYS LDO regulator voltage level enumeration in Active mode.
 */
typedef enum _spc_sys_ldo_voltage_level
{
    kSPC_SysLDO_NormalVoltage    = 0x0U, /*!< SYS LDO VDD Regulator regulate to Normal Voltage(1.8V). */
    kSPC_SysLDO_OverDriveVoltage = 0x1U, /*!< SYS LDO VDD Regulator regulate to Over Drive Voltage(2.5V). */
} spc_sys_ldo_voltage_level_t;

/*!
 * @brief SYS LDO regulator Drive Strength enumeration in Active mode or Low Power mode.
 */
typedef enum _spc_sys_ldo_drive_strength
{
    kSPC_SysLDO_LowDriveStrength    = 0x0U, /*!< SYS LDO VDD regulator Drive Strength set to low. */
    kSPC_SysLDO_NormalDriveStrength = 0x1U, /*!< SYS LDO VDD regulator Drive Strength set to Normal. */
} spc_sys_ldo_drive_strength_t;
#endif                                      /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */

/*!
 * @brief Core LDO regulator voltage level enumeration in Active mode or Low Power mode.
 */
typedef enum _spc_core_ldo_voltage_level
{
    kSPC_CoreLDO_UnderDriveVoltage = 0x0U, /*!< @deprecated, to align with description of latest RM, please use
                                            #kSPC_Core_LDO_RetentionVoltage as instead. */
    kSPC_Core_LDO_RetentionVoltage = 0x0U, /*!< Core LDO VDD regulator regulate to retention voltage, please note that
                                           only useful in low power modes and not all devices support this options
                                           please refer to devices' RM for details. */
    kSPC_CoreLDO_MidDriveVoltage  = 0x1U,  /*!< Core LDO VDD regulator regulate to Mid Drive Voltage. */
    kSPC_CoreLDO_NormalVoltage    = 0x2U,  /*!< Core LDO VDD regulator regulate to Normal Voltage. */
    kSPC_CoreLDO_OverDriveVoltage = 0x3U,  /*!< Core LDO VDD regulator regulate to overdrive Voltage. */
} spc_core_ldo_voltage_level_t;

/*!
 * @brief CORE LDO VDD regulator Drive Strength enumeration in Low Power mode.
 */
typedef enum _spc_core_ldo_drive_strength
{
    kSPC_CoreLDO_LowDriveStrength    = 0x0U, /*!< Core LDO VDD regulator Drive Strength set to low. */
    kSPC_CoreLDO_NormalDriveStrength = 0x1U, /*!< Core LDO VDD regulator Drive Strength set to Normal. */
} spc_core_ldo_drive_strength_t;

/*!
 * @brief IO VDD Low-Voltage Level Select.
 */
typedef enum _spc_low_voltage_level_select
{
    kSPC_LowVoltageNormalLevel = 0x0U, /*!< @deprecated, please use kSPC_LowVoltageHighRange as instead. */
    kSPC_LowVoltageSafeLevel   = 0x1U, /*!< @deprecated, please use kSPC_LowVoltageLowRange as instead. */

    kSPC_LowVoltageHighRange = 0x0U,   /*!< High range LVD threshold. */
    kSPC_LowVoltageLowRange  = 0x1U,  /*!< Low range LVD threshold. */
} spc_low_voltage_level_select_t;

#if !(defined(FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) && FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT)
/*!
 * @brief Used to select output of 4-bit ripple counter is used to monitor a glitch on VDD core.
 */
typedef enum _spc_vdd_core_glitch_ripple_counter_select
{
    kSPC_selectBit0Of4bitRippleCounter = 0x0U, /*!< Select bit-0 of 4-bit Ripple Counter
                                                    to detect glitch on VDD Core. */
    kSPC_selectBit1Of4bitRippleCounter = 0x1U, /*!< Select bit-1 of 4-bit Ripple Counter
                                                    to detect glitch on VDD Core. */
    kSPC_selectBit2Of4bitRippleCounter = 0x2U, /*!< Select bit-2 of 4-bit Ripple Counter
                                                    to detect glitch on VDD Core. */
    kSPC_selectBit3Of4bitRippleCounter = 0x3U, /*!< Select bit-3 of 4-bit Ripple Counter
                                                    to detect glitch on VDD Core. */
} spc_vdd_core_glitch_ripple_counter_select_t;
#endif

/*!
 * @brief The list of the operating voltage for the SRAM's read/write timing margin.
 */
typedef enum _spc_sram_operate_voltage
{
    kSPC_sramOperateAt1P0V = 0x1U, /*!< SRAM configured for 1.0V operation. */
    kSPC_sramOperateAt1P1V = 0x2U, /*!< SRAM configured for 1.1V operation. */
    kSPC_sramOperateAt1P2V = 0x3U, /*!< SRAM configured for 1.2V operation. */
} spc_sram_operate_voltage_t;

#if !(defined(FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) && FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT)
/*!
 * @brief The configuration of VDD Core glitch detector.
 */
typedef struct _spc_vdd_core_glitch_detector_config
{
    spc_vdd_core_glitch_ripple_counter_select_t rippleCounterSelect; /*!< Used to set ripple counter. */
    uint8_t resetTimeoutValue; /*!< The timeout value used to reset glitch detect/compare logic after an initial
                              glitch is detected. */
    bool enableReset;          /*!< Used to enable/disable POR/LVD reset that caused by CORE VDD glitch detect error. */
    bool enableInterrupt;      /*!< Used to enable/disable hardware interrupt if CORE VDD glitch detect error. */
} spc_vdd_core_glitch_detector_config_t;
#endif

typedef struct _spc_sram_voltage_config
{
    spc_sram_operate_voltage_t operateVoltage; /*!< Specifies the operating voltage for the SRAM's
                                                     read/write timing margin.  */
    bool requestVoltageUpdate;                 /*!< Used to control whether request an SRAM trim value change. */
} spc_sram_voltage_config_t;

/*!
 * @brief Low Power Request output pin configuration.
 */
typedef struct _spc_lowpower_request_config
{
    bool enable;                                     /*!< Low Power Request Output enable. */
    spc_lowpower_request_pin_polarity_t polarity;    /*!< Low Power Request Output pin polarity select. */
    spc_lowpower_request_output_override_t override; /*!< Low Power Request Output Override. */
} spc_lowpower_request_config_t;

/*!
 * @brief Core LDO regulator options in Active mode.
 */
typedef struct _spc_active_mode_core_ldo_option
{
    spc_core_ldo_voltage_level_t CoreLDOVoltage; /*!< Core LDO Regulator Voltage Level selection in Active mode. */
#if defined(FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS) && FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS
    spc_core_ldo_drive_strength_t CoreLDODriveStrength; /*!< Core LDO Regulator Drive Strength
                                                            selection in Active mode */
#endif                                                  /* FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS */
} spc_active_mode_core_ldo_option_t;

#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO)
/*!
 * @brief System LDO regulator options in Active mode.
 */
typedef struct _spc_active_mode_sys_ldo_option
{
    spc_sys_ldo_voltage_level_t SysLDOVoltage; /*!< System LDO Regulator Voltage Level selection in Active mode. */
    spc_sys_ldo_drive_strength_t SysLDODriveStrength; /*!< System LDO Regulator Drive Strength
                                                            selection in Active mode. */
} spc_active_mode_sys_ldo_option_t;
#endif                                                /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */

#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC)
/*!
 * @brief DCDC regulator options in Active mode.
 */
typedef struct _spc_active_mode_dcdc_option
{
    spc_dcdc_voltage_level_t DCDCVoltage;        /*!< DCDC Regulator Voltage Level selection in Active mode. */
    spc_dcdc_drive_strength_t DCDCDriveStrength; /*!< DCDC_CORE Regulator Drive Strength selection in Active mode. */
} spc_active_mode_dcdc_option_t;
#endif                                           /* FSL_FEATURE_MCX_SPC_HAS_DCDC */

/*!
 * @brief Core LDO regulator options in Low Power mode.
 */
typedef struct _spc_lowpower_mode_core_ldo_option
{
    spc_core_ldo_voltage_level_t CoreLDOVoltage; /*!< Core LDO Regulator Voltage Level selection in Low Power mode. */
    spc_core_ldo_drive_strength_t CoreLDODriveStrength; /*!< Core LDO Regulator Drive Strength
                                                            selection in Low Power mode */
} spc_lowpower_mode_core_ldo_option_t;

#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO)
/*!
 * @brief System LDO regulator options in Low Power mode.
 */
typedef struct _spc_lowpower_mode_sys_ldo_option
{
    spc_sys_ldo_drive_strength_t SysLDODriveStrength; /*!< System LDO Regulator Drive Strength
                                                            selection in Low Power mode. */
} spc_lowpower_mode_sys_ldo_option_t;
#endif                                                /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */

#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC)
/*!
 * @brief DCDC regulator options in Low Power mode.
 */
typedef struct _spc_lowpower_mode_dcdc_option
{
    spc_dcdc_voltage_level_t DCDCVoltage;        /*!< DCDC Regulator Voltage Level selection in Low Power mode. */
    spc_dcdc_drive_strength_t DCDCDriveStrength; /*!< DCDC_CORE Regulator Drive Strength selection in Low Power mode. */
} spc_lowpower_mode_dcdc_option_t;

/*!
 * @brief DCDC Burst configuration.
 * @deprecated Do not recommend to use this structure.
 */
typedef struct _spc_dcdc_burst_config
{
    bool sofwareBurstRequest;  /*!< Enable/Disable DCDC Software Burst Request. */
    bool externalBurstRequest; /*!< Enable/Disable DCDC External Burst Request. */
    bool stabilizeBurstFreq;   /*!< Enable/Disable DCDC frequency stabilization. */
    uint8_t freq;              /*!< The frequency of the current burst.  */
} spc_dcdc_burst_config_t;
#endif                         /* FSL_FEATURE_MCX_SPC_HAS_DCDC */

/*!
 * @brief CORE/SYS/IO VDD Voltage Detect options.
 */
typedef struct _spc_voltage_detect_option
{
    bool HVDInterruptEnable; /*!< CORE/SYS/IO VDD High Voltage Detect interrupt enable. */
    bool HVDResetEnable;     /*!< CORE/SYS/IO VDD High Voltage Detect reset enable. */
    bool LVDInterruptEnable; /*!< CORE/SYS/IO VDD Low Voltage Detect interrupt enable. */
    bool LVDResetEnable;     /*!< CORE/SYS/IO VDD Low Voltage Detect reset enable. */
} spc_voltage_detect_option_t;

/*!
 * @brief Core Voltage Detect configuration.
 */
typedef struct _spc_core_voltage_detect_config
{
    spc_voltage_detect_option_t option; /*!< Core VDD Voltage Detect option. */
} spc_core_voltage_detect_config_t;

/*!
 * @brief System Voltage Detect Configuration.
 */
typedef struct _spc_system_voltage_detect_config
{
    spc_voltage_detect_option_t option;   /*!< System VDD Voltage Detect option. */
    spc_low_voltage_level_select_t level; /*!< @deprecated, reserved for all devices, will removed in next release. */
} spc_system_voltage_detect_config_t;

#if (defined(FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD) && FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD)
/*!
 * @brief IO Voltage Detect Configuration.
 */
typedef struct _spc_io_voltage_detect_config
{
    spc_voltage_detect_option_t option;   /*!< IO VDD Voltage Detect option. */
    spc_low_voltage_level_select_t level; /*!< IO VDD Low-voltage level selection. */
} spc_io_voltage_detect_config_t;
#endif                                    /* FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD */

/*!
 * @brief Active mode configuration.
 */
typedef struct _spc_active_mode_regulators_config
{
    spc_bandgap_mode_t bandgapMode; /*!< Specify bandgap mode in active mode. */

#if (defined(FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT) && FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT)
    bool lpBuff; /*!< Enable/disable CMP bandgap buffer. */
#endif           /* FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT */

#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC)
    spc_active_mode_dcdc_option_t DCDCOption; /*!< Specify DCDC configurations in active mode. */
#endif                                        /* FSL_FEATURE_MCX_SPC_HAS_DCDC */

#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO)
    spc_active_mode_sys_ldo_option_t SysLDOOption;   /*!< Specify System LDO configurations in active mode. */
#endif                                               /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */

    spc_active_mode_core_ldo_option_t CoreLDOOption; /*!< Specify Core LDO configurations in active mode. */
} spc_active_mode_regulators_config_t;

/*!
 * @brief Low Power Mode configuration.
 */
typedef struct _spc_lowpower_mode_regulators_config
{
    bool lpIREF;                    /*!< Enable/disable low power IREF in low power modes. */
    spc_bandgap_mode_t bandgapMode; /*!< Specify bandgap mode in low power modes. */

#if (defined(FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT) && FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT)
    bool lpBuff; /*!< Enable/disable CMP bandgap buffer in low power modes. */
#endif           /* FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT */

#if (defined(FSL_FEATURE_MCX_SPC_HAS_COREVDD_IVS_EN_BIT) && FSL_FEATURE_MCX_SPC_HAS_COREVDD_IVS_EN_BIT)
    bool CoreIVS; /*!< Enable/disable CORE VDD internal voltage scaling. */
#endif            /* FSL_FEATURE_MCX_SPC_HAS_COREVDD_IVS_EN_BIT */

#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC)
    spc_lowpower_mode_dcdc_option_t DCDCOption; /*!< Specify DCDC configurations in low power modes. */
#endif                                          /* FSL_FEATURE_MCX_SPC_HAS_DCDC */

#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO)
    spc_lowpower_mode_sys_ldo_option_t SysLDOOption;   /*!< Specify system LDO configurations in low power modes. */
#endif                                                 /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */

    spc_lowpower_mode_core_ldo_option_t CoreLDOOption; /*!< Specify core LDO configurations in low power modes. */
} spc_lowpower_mode_regulators_config_t;

/*******************************************************************************
 * API
 ******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus */

/*!
 * @name SPC Status
 * @{
 */
/*!
 * @brief Gets Isolation status for each power domains.
 *
 * This function gets the status which indicates whether certain
 * peripheral and the IO pads are in a latched state as a result
 * of having been in POWERDOWN mode.
 *
 * @param base SPC peripheral base address.
 * @return Current isolation status for each power domains. See @ref _spc_power_domains for details.
 */
uint8_t SPC_GetPeriphIOIsolationStatus(SPC_Type *base);

/*!
 * @brief Clears peripherals and I/O pads isolation flags for each power domains.
 *
 * This function clears peripherals and I/O pads isolation flags for each power domains.
 * After recovering from the POWERDOWN mode, user must invoke this function to release the
 * I/O pads and certain peripherals to their normal run mode state. Before invoking this
 * function, user must restore chip configuration in particular pin configuration for enabled
 * WUU wakeup pins.
 *
 * @param base SPC peripheral base address.
 */
static inline void SPC_ClearPeriphIOIsolationFlag(SPC_Type *base)
{
    base->SC |= SPC_SC_ISO_CLR_MASK;
}

/*!
 * @brief Gets SPC busy status flag.
 *
 * This function gets SPC busy status flag. When SPC executing any type of power mode
 * transition in ACTIVE mode or any of the SOC low power mode, the SPC busy status flag is set
 * and this function returns true. When changing CORE LDO voltage level and DCDC voltage level
 * in ACTIVE mode, the SPC busy status flag is set and this function return true.
 *
 * @param base SPC peripheral base address.
 * @return Ack busy flag.
 *          true    -   SPC is busy.
 *          false   -   SPC is not busy.
 */
static inline bool SPC_GetBusyStatusFlag(SPC_Type *base)
{
    return ((base->SC & SPC_SC_BUSY_MASK) != 0UL);
}

/*!
 * @brief Checks system low power request.
 *
 * @note Only when all power domains request low power mode entry, the result of this function is true. That means when
 * all power domains request low power mode entry, the SPC regulators will be controlled by LP_CFG register.
 *
 * @param base SPC peripheral base address.
 * @return The system low power request check result.
 *       - \b true All power domains have requested low power mode and SPC has entered a low power state and power mode
 *                 configuration are based on the LP_CFG configuration register.
 *       - \b false SPC in active mode and ACTIVE_CFG register control system power supply.
 */
static inline bool SPC_CheckLowPowerReqest(SPC_Type *base)
{
    return ((base->SC & SPC_SC_SPC_LP_REQ_MASK) == SPC_SC_SPC_LP_REQ_MASK);
}

/*!
 * @brief Clears system low power request, set SPC in active mode.
 *
 * @param base SPC peripheral base address.
 */
static inline void SPC_ClearLowPowerRequest(SPC_Type *base)
{
    base->SC |= SPC_SC_SPC_LP_REQ_MASK;
}

#if (defined(FSL_FEATURE_MCX_SPC_HAS_SWITCH_STATE_BIT) && FSL_FEATURE_MCX_SPC_HAS_SWITCH_STATE_BIT)
/*!
 * @brief Checks whether the power switch is on.
 *
 * @param base SPC peripheral base address.
 *
 * @retval true The power switch is on.
 * @retval false The power switch is off.
 */
static inline bool SPC_CheckSwitchState(SPC_Type *base)
{
    return ((base->SC & SPC_SC_SWITCH_STATE_MASK) != 0UL);
}
#endif /* FSL_FEATURE_MCX_SPC_HAS_SWITCH_STATE_BIT */

/*!
 * @brief Gets selected power domain's requested low power mode.
 *
 * @param base SPC peripheral base address.
 * @param powerDomainId Power Domain Id, please refer to @ref spc_power_domain_id_t.
 *
 * @return The selected power domain's requested low power mode, please refer to @ref spc_power_domain_low_power_mode_t.
 */
spc_power_domain_low_power_mode_t SPC_GetPowerDomainLowPowerMode(SPC_Type *base, spc_power_domain_id_t powerDomainId);

/*!
 * @brief Checks power domain's low power request.
 *
 * @param base SPC peripheral base address.
 * @param powerDomainId Power Domain Id, please refer to @ref spc_power_domain_id_t.
 * @return The result of power domain's low power request.
 *            - \b true The selected power domain requests low power mode entry.
 *            - \b false The selected power domain does not request low power mode entry.
 */
static inline bool SPC_CheckPowerDomainLowPowerRequest(SPC_Type *base, spc_power_domain_id_t powerDomainId)
{
    assert((uint8_t)powerDomainId < SPC_PD_STATUS_COUNT);
    return ((base->PD_STATUS[(uint8_t)powerDomainId] & SPC_PD_STATUS_PWR_REQ_STATUS_MASK) ==
            SPC_PD_STATUS_PWR_REQ_STATUS_MASK);
}

/*!
 * @brief Clears selected power domain's low power request flag.
 *
 * @param base SPC peripheral base address.
 * @param powerDomainId Power Domain Id, please refer to @ref spc_power_domain_id_t.
 */
static inline void SPC_ClearPowerDomainLowPowerRequestFlag(SPC_Type *base, spc_power_domain_id_t powerDomainId)
{
    assert((uint8_t)powerDomainId < SPC_PD_STATUS_COUNT);
    base->PD_STATUS[(uint8_t)powerDomainId] |= SPC_PD_STATUS_PD_LP_REQ_MASK;
}

/*! @} */

#if (defined(FSL_FEATURE_MCX_SPC_HAS_SRAMRETLDO_REG) && FSL_FEATURE_MCX_SPC_HAS_SRAMRETLDO_REG)
/*!
 * @name SRAM Retention LDO Control APIs
 * @{
 */

/*!
 * @brief Trims SRAM retention regulator reference voltage, trim step is 12 mV, range is around 0.48V to 0.85V.
 *
 * @param base SPC peripheral base address.
 * @param trimValue Reference voltage trim value.
 */
static inline void SPC_TrimSRAMLdoRefVoltage(SPC_Type *base, uint8_t trimValue)
{
    base->SRAMRETLDO_REFTRIM =
        ((base->SRAMRETLDO_REFTRIM & ~SPC_SRAMRETLDO_REFTRIM_REFTRIM_MASK) | SPC_SRAMRETLDO_REFTRIM_REFTRIM(trimValue));
}

/*!
 * @brief Enables/disables SRAM retention LDO.
 *
 * @param base SPC peripheral base address.
 * @param enable Used to enable/disable SRAM LDO :
 *          - \b true Enable SRAM LDO;
 *          - \b false Disable SRAM LDO.
 */
static inline void SPC_EnableSRAMLdo(SPC_Type *base, bool enable)
{
    if (enable)
    {
        base->SRAMRETLDO_CNTRL |= SPC_SRAMRETLDO_CNTRL_SRAMLDO_ON_MASK;
    }
    else
    {
        base->SRAMRETLDO_CNTRL &= ~SPC_SRAMRETLDO_CNTRL_SRAMLDO_ON_MASK;
    }
}

/*!
 * @brief
 *
 * @todo Need to check.
 *
 * @param base SPC peripheral base address.
 * @param mask The OR'ed value of SRAM Array.
 */
static inline void SPC_RetainSRAMArray(SPC_Type *base, uint8_t mask)
{
    base->SRAMRETLDO_CNTRL |= SPC_SRAMRETLDO_CNTRL_SRAM_RET_EN(mask);
}

/*! @} */
#endif /* FSL_FEATURE_MCX_SPC_HAS_SRAMRETLDO_REG */

/*!
 * @name Low Power Request configuration
 * @{
 */
/*!
 * @brief Configs Low power request output pin.
 *
 * This function config the low power request output pin
 *
 * @param base SPC peripheral base address.
 * @param config Pointer the @ref spc_lowpower_request_config_t structure.
 */
void SPC_SetLowPowerRequestConfig(SPC_Type *base, const spc_lowpower_request_config_t *config);

/*! @} */

#if (defined(FSL_FEATURE_MCX_SPC_HAS_CFG_REG) && FSL_FEATURE_MCX_SPC_HAS_CFG_REG)
/*!
 * @name Integrated Power Switch Control APIs
 * @{
 */

/*!
 * @brief Enables/disables the integrated power switch manually.
 *
 * @param base SPC peripheral base address.
 * @param enable Used to enable/disable the integrated power switch:
 *             - \b true Enable the integrated power switch;
 *             - \b false Disable the integrated power switch.
 */
static inline void SPC_EnableIntegratedPowerSwitchManually(SPC_Type *base, bool enable)
{
    if (enable)
    {
        base->CFG |= (SPC_CFG_INTG_PWSWTCH_SLEEP_ACTIVE_EN_MASK | SPC_CFG_INTG_PWSWTCH_WKUP_ACTIVE_EN_MASK);
    }
    else
    {
        base->CFG &= ~(SPC_CFG_INTG_PWSWTCH_SLEEP_ACTIVE_EN_MASK | SPC_CFG_INTG_PWSWTCH_WKUP_ACTIVE_EN_MASK);
    }
}

/*!
 * @brief Enables/disables the integrated power switch automatically.
 *
 * To gate the integrated power switch when chip enter low power modes, and ungate the switch after wake-up from low
 * power modes:
 * @code
 *   SPC_EnableIntegratedPowerSwitchAutomatically(SPC, true, true);
 * @endcode
 *
 * @param base SPC peripheral base address.
 * @param sleepGate Enable the integrated power switch when chip enter low power modes:
 *          - \b true SPC asserts an output pin at low-power entry to power-gate the switch;
 *          - \b false SPC does not assert an output pin at low-power entry to power-gate the switch.
 * @param wakeupUngate Enables the switch after wake-up from low power modes:
 *          - \b true SPC asserts an output pin at low-power exit to power-ungate the switch;
 *          - \b false SPC does not assert an output pin at low-power exit to power-ungate the switch.
 */
static inline void SPC_EnableIntegratedPowerSwitchAutomatically(SPC_Type *base, bool sleepGate, bool wakeupUngate)
{
    uint32_t tmp32 = ((base->CFG) & ~(SPC_CFG_INTG_PWSWTCH_SLEEP_EN_MASK | SPC_CFG_INTG_PWSWTCH_WKUP_EN_MASK));

    tmp32 |= SPC_CFG_INTG_PWSWTCH_SLEEP_EN(sleepGate) | SPC_CFG_INTG_PWSWTCH_WKUP_EN(wakeupUngate);

    base->CFG = tmp32;
}

/*! @} */
#endif /* FSL_FEATURE_MCX_SPC_HAS_CFG_REG */

#if !(defined(FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) && FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT)
/*!
 * @name VDD Core Glitch Detector Control APIs
 * @{
 */

/*!
 * @brief Configures VDD Core Glitch detector, including ripple counter selection, timeout value and so on.
 *
 * @param base SPC peripheral base address.
 * @param config Pointer to the structure in type of @ref spc_vdd_core_glitch_detector_config_t.
 */
void SPC_ConfigVddCoreGlitchDetector(SPC_Type *base, const spc_vdd_core_glitch_detector_config_t *config);

/*!
 * @brief Checks selected 4-bit glitch ripple counter's output.
 *
 * @param base SPC peripheral base address.
 * @param rippleCounter The ripple counter to check, please refer to @ref spc_vdd_core_glitch_ripple_counter_select_t.
 *
 * @retval true The selected ripple counter output is 1, will generate interrupt or reset based on settings.
 * @retval false The selected ripple counter output is 0.
 */

static inline bool SPC_CheckGlitchRippleCounterOutput(SPC_Type *base,
                                                      spc_vdd_core_glitch_ripple_counter_select_t rippleCounter)
{
    return ((base->VDD_CORE_GLITCH_DETECT_SC & SPC_VDD_CORE_GLITCH_DETECT_SC_GLITCH_DETECT_FLAG_MASK) ==
            SPC_VDD_CORE_GLITCH_DETECT_SC_GLITCH_DETECT_FLAG(1UL << (uint32_t)(rippleCounter)));
}

/*!
 * @brief Clears output of selected glitch ripple counter.
 *
 * @param base SPC peripheral base address.
 * @param rippleCounter The ripple counter to check, please refer to @ref spc_vdd_core_glitch_ripple_counter_select_t.
 */
static inline void SPC_ClearGlitchRippleCounterOutput(SPC_Type *base,
                                                      spc_vdd_core_glitch_ripple_counter_select_t rippleCounter)
{
    base->VDD_CORE_GLITCH_DETECT_SC |=
        SPC_VDD_CORE_GLITCH_DETECT_SC_GLITCH_DETECT_FLAG(1UL << (uint32_t)(rippleCounter));
}

/*!
 * @brief After invoking this function, writes to SPC_VDD_CORE_GLITCH_DETECT_SC[RE] register are ignored.
 *
 * @param base SPC peripheral base address.
 */
static inline void SPC_LockVddCoreVoltageGlitchDetectResetControl(SPC_Type *base)
{
    base->VDD_CORE_GLITCH_DETECT_SC |= SPC_VDD_CORE_GLITCH_DETECT_SC_LOCK_MASK;
}

/*!
 * @brief After invoking this function, writes to SPC_VDD_CORE_GLITCH_DETECT_SC[RE] register are allowed.
 *
 * @param base SPC peripheral base address.
 */
static inline void SPC_UnlockVddCoreVoltageGlitchDetectResetControl(SPC_Type *base)
{
    base->VDD_CORE_GLITCH_DETECT_SC &= ~SPC_VDD_CORE_GLITCH_DETECT_SC_LOCK_MASK;
}

/*!
 * @brief Checks if SPC_VDD_CORE_GLITCH_DETECT_SC[RE] register is writable.
 *
 * @param base SPC peripheral base address.
 *
 * @retval true SPC_VDD_CORE_GLITCH_DETECT_SC[RE] register is writable.
 * @retval false SPC_VDD_CORE_GLITCH_DETECT_SC[RE] register is not writable.
 */
static inline bool SPC_CheckVddCoreVoltageGlitchResetControlState(SPC_Type *base)
{
    return ((base->VDD_CORE_GLITCH_DETECT_SC & SPC_VDD_CORE_GLITCH_DETECT_SC_LOCK_MASK) != 0UL);
}

/*! @} */
#endif

/*!
 * @name SRAM Control APIs
 * @{
 */

/*!
 * @brief Set SRAM operate voltage.
 *
 * @param base SPC peripheral base address.
 * @param config The pointer to @ref spc_sram_voltage_config_t, specifies the configuration of sram voltage.
 */
void SPC_SetSRAMOperateVoltage(SPC_Type *base, const spc_sram_voltage_config_t *config);

/*! @} */

/*!
 * @name Active Mode configuration
 * @{
 */

/*!
 * @brief Gets the Bandgap mode in Active mode.
 *
 * @param base SPC peripheral base address.
 * @return Bandgap mode in the type of @ref spc_bandgap_mode_t enumeration.
 */
static inline spc_bandgap_mode_t SPC_GetActiveModeBandgapMode(SPC_Type *base)
{
    return (spc_bandgap_mode_t)(uint32_t)((base->ACTIVE_CFG & SPC_ACTIVE_CFG_BGMODE_MASK) >>
                                          SPC_ACTIVE_CFG_BGMODE_SHIFT);
}

/*!
 * @brief Gets all voltage detectors status in Active mode.
 *
 * @param base SPC peripheral base address.
 * @return All voltage detectors status in Active mode.
 */
static inline uint32_t SPC_GetActiveModeVoltageDetectStatus(SPC_Type *base)
{
    uint32_t state;
    state = base->ACTIVE_CFG &
            (
#if (defined(FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD) && FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD)
                SPC_ACTIVE_CFG_IO_HVDE_MASK | SPC_ACTIVE_CFG_IO_LVDE_MASK |

#endif /* FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD */
                SPC_ACTIVE_CFG_SYS_HVDE_MASK | SPC_ACTIVE_CFG_SYS_LVDE_MASK | SPC_ACTIVE_CFG_CORE_LVDE_MASK

#if (defined(FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD) && FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD)
                | SPC_ACTIVE_CFG_CORE_HVDE_MASK

#endif /* FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD */
            );
    return state;
}

/*!
 * @brief Configs Bandgap mode in Active mode.
 *
 * @note To disable bandgap in Active mode:
 *          1. Disable all LVD's and HVD's in active mode;
 *          2. Disable Glitch detect;
 *          3. Configure LDO's and DCDC to low drive strength in active mode;
 *          4. Invoke this function to disable bandgap in active mode;
 *      otherwise the error status will be reported.
 *
 * @note Some other system resources(such as PLL, CMP) require bandgap to be enabled, to disable bandgap please
 * take care of other system resources.
 *
 * @param base SPC peripheral base address.
 * @param mode The Bandgap mode be selected.
 *
 * @retval #kStatus_SPC_BandgapModeWrong The Bandgap can not be disabled in active mode.
 * @retval #kStatus_Success Config Bandgap mode in Active power mode successful.
 */
status_t SPC_SetActiveModeBandgapModeConfig(SPC_Type *base, spc_bandgap_mode_t mode);

#if (defined(FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT) && FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT)
/*!
 * @brief Enables/Disable the CMP Bandgap Buffer in Active mode.
 *
 * @param base SPC peripheral base address.
 * @param enable Enable/Disable CMP Bandgap buffer.
 *          true    -   Enable Buffer Stored Reference voltage to CMP.
 *          false   -   Disable Buffer Stored Reference voltage to CMP.
 */
static inline void SPC_EnableActiveModeCMPBandgapBuffer(SPC_Type *base, bool enable)
{
    if (enable)
    {
        base->ACTIVE_CFG |= SPC_ACTIVE_CFG_LPBUFF_EN_MASK;
    }
    else
    {
        base->ACTIVE_CFG &= ~SPC_ACTIVE_CFG_LPBUFF_EN_MASK;
    }
}
#endif /* FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT */

/*!
 * @brief Sets the delay when the regulators change voltage level in Active mode.
 *
 * @param base SPC peripheral base address.
 * @param delay The number of SPC timer clock cycles.
 */
static inline void SPC_SetActiveModeVoltageTrimDelay(SPC_Type *base, uint16_t delay)
{
    base->ACTIVE_VDELAY = SPC_ACTIVE_VDELAY_ACTIVE_VDELAY(delay);
}

/*!
 * @brief Configs all settings of regulators in Active mode at a time.
 *
 * @note This function is used to overwrite all settings of regulators(including bandgap mode, regulators'
 * drive strength and voltage level) in active mode at a time.
 *
 * @note Enable/disable LVDs/HVDs before invoking this function.
 *
 * @note This function will check input parameters based on hardware restrictions before setting registers, if input
 * parameters do not satisfy hardware restrictions the specific error will be reported.
 *
 *
 * @note Some hardware restrictions not covered, application should be aware of this and follow this hardware
 * restrictions otherwise some unknown issue may occur:
 *        1. If Core LDO's drive strength are set to same value in both Active mode and low power mode,
 *          the voltage level should also set to same value.
 *        2. When switching Core LDO's drive strength from low to normal, ensure the LDO_CORE high voltage level is set
 *          to same level that was set prior to switching to the LDO_CORE drive strength. Otherwise, if the LVDs are
 *          enabled, an unexpected LVD can occur.
 *
 * @note If this function can not satisfy some tricky settings, please invoke other APIs in low-level function group.
 *
 * @param base SPC peripheral base address.
 * @param config Pointer to spc_active_mode_regulators_config_t structure.
 *
 * @retval #kStatus_Success Config regulators in Active power mode successful.
 * @retval #kStatus_SPC_BandgapModeWrong Based on input setting, bandgap can not be disabled.
 * @retval #kStatus_SPC_Busy The SPC instance is busy to execute any type of power mode transition.
 * @retval #kStatus_SPC_CORELDOLowDriveStrengthIgnore Any of LVDs/HVDs kept enabled before invoking this function.
 * @retval #kStatus_SPC_SYSLDOOverDriveVoltageFail Fail to regulator to Over Drive Voltage due to
 *                                                  System VDD HVD is not disabled.
 * @retval #kStatus_SPC_SYSLDOLowDriveStrengthIgnore Any of LVDs/HVDs kept enabled before invoking this function.
 * @retval #kStatus_SPC_CORELDOVoltageWrong Core LDO and System LDO do not have same voltage level.
 */
status_t SPC_SetActiveModeRegulatorsConfig(SPC_Type *base, const spc_active_mode_regulators_config_t *config);

#if !(defined(FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) && FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT)
/*!
 * @brief Disables/Enables VDD Core Glitch Detect in Active mode.
 *
 * @note State of glitch detect disable feature will be ignored if bandgap is disabled and
 * glitch detect hardware will be forced to OFF state.
 *
 * @param base SPC peripheral base address.
 * @param disable Used to disable/enable VDD Core Glitch detect feature.
 *         - \b true Disable VDD Core Low Voltage detect;
 *         - \b false Enable VDD Core Low Voltage detect.
 */
static inline void SPC_DisableActiveModeVddCoreGlitchDetect(SPC_Type *base, bool disable)
{
    if (disable)
    {
        base->ACTIVE_CFG |= SPC_ACTIVE_CFG_GLITCH_DETECT_DISABLE_MASK;
    }
    else
    {
        base->ACTIVE_CFG &= ~SPC_ACTIVE_CFG_GLITCH_DETECT_DISABLE_MASK;
    }
}

/*!
 * @brief Check if Glitch detect hardware is enabled in active mode.
 *
 * @param base SPC peripheral base address.
 * @return Indicate if Glitch detector is enabled.
 */
static inline bool SPC_CheckActiveModeVddCoreGlitchDetectEnabled(SPC_Type *base)
{
    if ((base->ACTIVE_CFG & SPC_ACTIVE_CFG_GLITCH_DETECT_DISABLE_MASK) == 0UL)
    {
        return true;
    }
    else
    {
        return false;
    }
}

#endif /* FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT */

/*!
 * @brief Enables analog modules in active mode.
 *
 * @param base SPC peripheral base address.
 * @param maskValue The mask of analog modules to enable in active mode, should be the OR'ed value
 * of @ref spc_analog_module_control.
 */
static inline void SPC_EnableActiveModeAnalogModules(SPC_Type *base, uint32_t maskValue)
{
    base->ACTIVE_CFG1 |= SPC_ACTIVE_CFG1_SOC_CNTRL(maskValue);
}

/*!
 * @brief Disables analog modules in active mode.
 *
 * @param base SPC peripheral base address.
 * @param maskValue The mask of analog modules to disable in active mode, should be the OR'ed value
 * of @ref spc_analog_module_control.
 */
static inline void SPC_DisableActiveModeAnalogModules(SPC_Type *base, uint32_t maskValue)
{
    base->ACTIVE_CFG1 &= ~SPC_ACTIVE_CFG1_SOC_CNTRL(maskValue);
}

/*!
 * @brief Gets enabled analog modules that enabled in active mode.
 *
 * @param base SPC peripheral base address.
 *
 * @return The mask of enabled analog modules that enabled in active mode.
 */
static inline uint32_t SPC_GetActiveModeEnabledAnalogModules(SPC_Type *base)
{
    return base->ACTIVE_CFG1;
}

/*! @} */

/*!
 * @name Low Power mode configuration
 * @{
 */

/*!
 * @brief Gets the Bandgap mode in Low Power mode.
 *
 * @param base SPC peripheral base address.
 * @return Bandgap mode in the type of @ref spc_bandgap_mode_t enumeration.
 */
static inline spc_bandgap_mode_t SPC_GetLowPowerModeBandgapMode(SPC_Type *base)
{
    return (spc_bandgap_mode_t)(uint32_t)((base->LP_CFG & SPC_LP_CFG_BGMODE_MASK) >> SPC_LP_CFG_BGMODE_SHIFT);
}

/*!
 * @brief Gets the status of all voltage detectors in Low Power mode.
 *
 * @param base SPC peripheral base address.
 * @return The status of all voltage detectors in low power mode.
 */
static inline uint32_t SPC_GetLowPowerModeVoltageDetectStatus(SPC_Type *base)
{
    uint32_t state;
    state = base->LP_CFG & (
#if (defined(FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD) && FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD)
                               SPC_LP_CFG_IO_HVDE_MASK | SPC_LP_CFG_IO_LVDE_MASK |

#endif /* FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD */
                               SPC_LP_CFG_SYS_HVDE_MASK | SPC_LP_CFG_SYS_LVDE_MASK | SPC_LP_CFG_CORE_LVDE_MASK

#if (defined(FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD) && FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD)
                               | SPC_LP_CFG_CORE_HVDE_MASK

#endif /* FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD */
                           );
    return state;
}

/*!
 * @brief Enables/Disables Low Power IREF in low power modes.
 *
 * This function enables/disables Low Power IREF. Low Power IREF can only get
 * disabled in Deep power down mode. In other low power modes, the Low Power IREF
 * is always enabled.
 *
 * @param base SPC peripheral base address.
 * @param enable Enable/Disable Low Power IREF.
 *          true    -   Enable Low Power IREF for Low Power modes.
 *          false   -   Disable Low Power IREF for Deep Power Down mode.
 */
static inline void SPC_EnableLowPowerModeLowPowerIREF(SPC_Type *base, bool enable)
{
    if (enable)
    {
        base->LP_CFG |= SPC_LP_CFG_LP_IREFEN_MASK;
    }
    else
    {
        base->LP_CFG &= ~SPC_LP_CFG_LP_IREFEN_MASK;
    }
}

/*!
 * @brief Configs Bandgap mode in Low Power mode.
 *
 * @note To disable Bandgap in Low-power mode:
 *          1. Disable all LVD's ad HVD's in low power mode;
 *          2. Disable Glitch detect in low power mode;
 *          3. Configure LDO's and DCDC to low drive strength in low power mode;
 *          4. Disable bandgap in low power mode;
 *      Otherwise, the error status will be reported.
 *
 * @note Some other system resources(such as PLL, CMP) require bandgap to be enabled, to disable bandgap please
 * take care of other system resources.
 *
 * @param base SPC peripheral base address.
 * @param mode The Bandgap mode be selected.
 *
 * @retval #kStatus_SPC_BandgapModeWrong The bandgap mode setting in Low Power mode is wrong.
 * @retval #kStatus_Success Config Bandgap mode in Low Power power mode successful.
 */
status_t SPC_SetLowPowerModeBandgapmodeConfig(SPC_Type *base, spc_bandgap_mode_t mode);

#if (defined(FSL_FEATURE_MCX_SPC_HAS_SRAMLDO_DPD_ON_BIT) && FSL_FEATURE_MCX_SPC_HAS_SRAMLDO_DPD_ON_BIT)
/*!
 * @brief Enables/disables SRAM_LDO deep power low power IREF.
 *
 * @param base SPC peripheral base address.
 * @param enable Used to enable/disable low power IREF :
 *        - \b true: Low Power IREF is enabled ;
 *        - \b false: Low Power IREF is disabled for power saving.
 */
static inline void SPC_EnableSRAMLdOLowPowerModeIREF(SPC_Type *base, bool enable)
{
    if (enable)
    {
        base->LP_CFG |= SPC_LP_CFG_SRAMLDO_DPD_ON_MASK;
    }
    else
    {
        base->LP_CFG &= ~SPC_LP_CFG_SRAMLDO_DPD_ON_MASK;
    }
}
#endif /* FSL_FEATURE_MCX_SPC_HAS_SRAMLDO_DPD_ON_BIT */

#if (defined(FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT) && FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT)
/*!
 * @brief Enables/Disables CMP Bandgap Buffer.
 *
 * This function gates CMP bandgap buffer. CMP bandgap buffer is automatically disabled and turned off
 * in Deep Power Down mode.
 *
 * @deprecated No longer used, please use SPC_EnableLowPowerModeCMPBandgapBuffer as instead.
 *
 * @param base SPC peripheral base address.
 * @param enable Enable/Disable CMP Bandgap buffer.
 *          true    -   Enable Buffer Stored Reference Voltage to CMP.
 *          false   -   Disable Buffer Stored Reference Voltage to CMP.
 */
static inline void SPC_EnableLowPowerModeCMPBandgapBufferMode(SPC_Type *base, bool enable)
{
    if (enable)
    {
        base->LP_CFG |= SPC_LP_CFG_LPBUFF_EN_MASK;
    }
    else
    {
        base->LP_CFG &= ~SPC_LP_CFG_LPBUFF_EN_MASK;
    }
}

/*!
 * @brief Enables/Disables CMP Bandgap Buffer.
 *
 * This function gates CMP bandgap buffer. CMP bandgap buffer is automatically disabled and turned off
 * in Deep Power Down mode.
 *
 * @deprecated No longer used.
 *
 * @param base SPC peripheral base address.
 * @param enable Enable/Disable CMP Bandgap buffer.
 *          true    -   Enable Buffer Stored Reference Voltage to CMP.
 *          false   -   Disable Buffer Stored Reference Voltage to CMP.
 */
static inline void SPC_EnableLowPowerModeCMPBandgapBuffer(SPC_Type *base, bool enable)
{
    if (enable)
    {
        base->LP_CFG |= SPC_LP_CFG_LPBUFF_EN_MASK;
    }
    else
    {
        base->LP_CFG &= ~SPC_LP_CFG_LPBUFF_EN_MASK;
    }
}
#endif /* FSL_FEATURE_MCX_SPC_HAS_LPBUFF_EN_BIT */

#if (defined(FSL_FEATURE_MCX_SPC_HAS_COREVDD_IVS_EN_BIT) && FSL_FEATURE_MCX_SPC_HAS_COREVDD_IVS_EN_BIT)
/*!
 * @brief Enables/Disables CORE VDD IVS(Internal Voltage Scaling) in power down modes.
 *
 * This function gates CORE VDD IVS. When enabled, the IVS regulator will scale the
 * external input CORE VDD to a lower voltage level to reduce internal leakage.
 * IVS is invalid in Sleep or Deep power down mode.
 *
 * @param base SPC peripheral base address.
 * @param enable Enable/Disable IVS.
 *          true    -   enable CORE VDD IVS in Power Down mode.
 *          false   -   disable CORE VDD IVS in Power Down mode.
 */
static inline void SPC_EnableLowPowerModeCoreVDDInternalVoltageScaling(SPC_Type *base, bool enable)
{
    if (enable)
    {
        base->LP_CFG |= SPC_LP_CFG_COREVDD_IVS_EN_MASK;
    }
    else
    {
        base->LP_CFG &= ~SPC_LP_CFG_COREVDD_IVS_EN_MASK;
    }
}
#endif /* FSL_FEATURE_MCX_SPC_HAS_COREVDD_IVS_EN_BIT */

/*!
 * @brief Sets the delay when exit the low power modes.
 *
 * @param base SPC peripheral base address.
 * @param delay The number of SPC timer clock cycles that the SPC waits on exit from low power modes.
 */
static inline void SPC_SetLowPowerWakeUpDelay(SPC_Type *base, uint16_t delay)
{
    base->LPWKUP_DELAY = SPC_LPWKUP_DELAY_LPWKUP_DELAY(delay);
}

/*!
 * @brief Configs all settings of regulators in Low power mode at a time.
 *
 * @note This function is used to overwrite all settings of regulators(including bandgap mode, regulators'
 * drive strength and voltage level) in low power mode at a time.
 *
 * @note Enable/disable LVDs/HVDs before invoking this function.
 *
 * @note This function will check input parameters based on hardware restrictions before setting registers, if input
 * parameters do not satisfy hardware restrictions the specific error will be reported.
 *
 * @note Some hardware restrictions not covered, application should be aware of this and follow this hardware
 * restrictions otherwise some unknown issue may occur:
 *        1. If Core LDO's drive strength are set to same value in both Active mode and low power mode,
 *          the voltage level should also set to same value.
 *        2. When switching Core LDO's drive strength from low to normal, ensure the LDO_CORE high voltage level is set
 *          to same level that was set prior to switching to the LDO_CORE drive strength. Otherwise, if the LVDs are
 *          enabled, an unexpected LVD can occur.
 *
 * @note If this function can not satisfy some tricky settings, please invoke other APIs in low-level function group.
 *
 * @param base SPC peripheral base address.
 * @param config Pointer to spc_lowpower_mode_regulators_config_t structure.
 * @retval #kStatus_Success Config regulators in Low power mode successful.
 * @retval #kStatus_SPC_BandgapModeWrong The bandgap should not be disabled based on input settings.
 * @retval #kStatus_SPC_CORELDOLowDriveStrengthIgnore Set driver strength to low will be ignored.
 * @retval #kStatus_SPC_SYSLDOLowDriveStrengthIgnore Set driver strength to low will be ignored.
 * @retval #kStatus_SPC_CORELDOVoltageWrong Core LDO and System LDO do not have same voltage level.
 */
status_t SPC_SetLowPowerModeRegulatorsConfig(SPC_Type *base, const spc_lowpower_mode_regulators_config_t *config);

#if !(defined(FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT) && FSL_FEATURE_MCX_SPC_HAS_NO_GLITCH_DETECT)
/*!
 * @brief Disable/Enable VDD Core Glitch Detect in low power mode.
 *
 * @note State of glitch detect disable feature will be ignored if bandgap is disabled and
 * glitch detect hardware will be forced to OFF state.
 *
 * @param base SPC peripheral base address.
 * @param disable Used to disable/enable VDD Core Glitch detect feature.
 *         - \b true Disable VDD Core Low Voltage detect;
 *         - \b false Enable VDD Core Low Voltage detect.
 */
static inline void SPC_DisableLowPowerModeVddCoreGlitchDetect(SPC_Type *base, bool disable)
{
    if (disable)
    {
        base->LP_CFG |= SPC_LP_CFG_GLITCH_DETECT_DISABLE_MASK;
    }
    else
    {
        base->LP_CFG &= ~SPC_LP_CFG_GLITCH_DETECT_DISABLE_MASK;
    }
}

/*!
 * @brief Check if Glitch detect hardware is enabled in low power mode.
 *
 * @param base SPC peripheral base address.
 * @return Indicate if Glitch detector is enabled.
 */
static inline bool SPC_CheckLowPowerModeVddCoreGlitchDetectEnabled(SPC_Type *base)
{
    if ((base->LP_CFG & SPC_LP_CFG_GLITCH_DETECT_DISABLE_MASK) == 0UL)
    {
        return true;
    }
    else
    {
        return false;
    }
}
#endif

/*!
 * @brief Enables analog modules in low power modes.
 *
 * @param base SPC peripheral base address.
 * @param maskValue The mask of analog modules to enable in low power modes, should be OR'ed value
                    of @ref spc_analog_module_control.
 */
static inline void SPC_EnableLowPowerModeAnalogModules(SPC_Type *base, uint32_t maskValue)
{
    base->LP_CFG1 |= SPC_LP_CFG1_SOC_CNTRL(maskValue);
}

/*!
 * @brief Disables analog modules in low power modes.
 *
 * @param base SPC peripheral base address.
 * @param maskValue The mask of analog modules to disable in low power modes, should be OR'ed value
                    of @ref spc_analog_module_control.
 */
static inline void SPC_DisableLowPowerModeAnalogModules(SPC_Type *base, uint32_t maskValue)
{
    base->LP_CFG1 &= ~SPC_LP_CFG1_SOC_CNTRL(maskValue);
}

/*!
 * @brief Gets enabled analog modules that enabled in low power modes.
 *
 * @param base SPC peripheral base address.
 *
 * @return The mask of enabled analog modules that enabled in low power modes.
 */
static inline uint32_t SPC_GetLowPowerModeEnabledAnalogModules(SPC_Type *base)
{
    return base->LP_CFG1;
}

/*! @} */

/*!
 * @name Voltage Detect Status
 * @{
 */
/*!
 * @brief Get Voltage Detect Status Flags.
 *
 * @param base SPC peripheral base address.
 * @return Voltage Detect Status Flags. See @ref _spc_voltage_detect_flags for details.
 */
static inline uint8_t SPC_GetVoltageDetectStatusFlag(SPC_Type *base)
{
    return (uint8_t)(base->VD_STAT);
}

/*!
 * @brief Clear Voltage Detect Status Flags.
 *
 * @param base SPC peripheral base address.
 * @param mask The mask of the voltage detect status flags. See @ref _spc_voltage_detect_flags for details.
 */
static inline void SPC_ClearVoltageDetectStatusFlag(SPC_Type *base, uint8_t mask)
{
    base->VD_STAT |= mask;
}

/*! @} */

/*!
 * @name Voltage Detect configuration for Core voltage domain.
 * @{
 */

/*!
 * @brief Configs CORE voltage detect options.
 *
 * @note: Setting both the voltage detect interrupt and reset
 *       enable will cause interrupt to be generated on exit from reset.
 *       If those conditioned is not desired, interrupt/reset so only one is enabled.
 *
 * @param base       SPC peripheral base address.
 * @param config     Pointer to spc_core_voltage_detect_config_t structure.
 */
void SPC_SetCoreVoltageDetectConfig(SPC_Type *base, const spc_core_voltage_detect_config_t *config);

/*!
 * @brief Locks Core voltage detect reset setting.
 *
 * This function locks core voltage detect reset setting. After invoking this function
 * any configuration of Core voltage detect reset will be ignored.
 *
 * @param base SPC peripheral base address.
 */
static inline void SPC_LockCoreVoltageDetectResetSetting(SPC_Type *base)
{
    base->VD_CORE_CFG |= SPC_VD_CORE_CFG_LOCK_MASK;
}

/*!
 * @brief Unlocks Core voltage detect reset setting.
 *
 * This function unlocks core voltage detect reset setting. If locks the Core
 * voltage detect reset setting, invoking this function to unlock.
 *
 * @param base SPC peripheral base address.
 */
static inline void SPC_UnlockCoreVoltageDetectResetSetting(SPC_Type *base)
{
    base->VD_CORE_CFG &= ~SPC_VD_CORE_CFG_LOCK_MASK;
}

/*!
 * @brief Enables/Disables the Core Low Voltage Detector in Active mode.
 *
 * @note If the CORE_LDO low voltage detect is enabled in Active mode, please note that the bandgap must be enabled
 * and the drive strength of each regulator must not set to low.
 *
 * @param base SPC peripheral base address.
 * @param enable Enable/Disable Core LVD.
 *          true    -   Enable Core Low voltage detector in active mode.
 *          false   -   Disable Core Low voltage detector in active mode.
 *
 * @retval #kStatus_Success Enable/Disable Core Low Voltage Detect successfully.
 */
status_t SPC_EnableActiveModeCoreLowVoltageDetect(SPC_Type *base, bool enable);

/*!
 * @brief Enables/Disables the Core Low Voltage Detector in Low Power mode.
 *
 * This function enables/disables the Core Low Voltage Detector.
 * If enabled the Core Low Voltage detector. The Bandgap mode in
 * low power mode must be programmed so that Bandgap is enabled.
 *
 * @note If the CORE_LDO low voltage detect is enabled in Low Power mode, please note that the bandgap must be enabled
 * and the drive strength of each regulator must not set to low in Low Power mode.
 *
 * @param base SPC peripheral base address.
 * @param enable Enable/Disable Core HVD.
 *          true    -   Enable Core Low voltage detector in low power mode.
 *          false   -   Disable Core Low voltage detector in low power mode.
 *
 * @retval #kStatus_Success Enable/Disable Core Low Voltage Detect in low power mode successfully.
 */
status_t SPC_EnableLowPowerModeCoreLowVoltageDetect(SPC_Type *base, bool enable);

#if (defined(FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD) && FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD)
/*!
 * @brief Enables/Disables the Core High Voltage Detector in Active mode.
 *
 * @note If the CORE_LDO high voltage detect is enabled in Active mode, please note that the bandgap must be enabled
 * and the drive strength of each regulator must not set to low.
 *
 * @param base SPC peripheral base address.
 * @param enable Enable/Disable Core HVD.
 *          true    -   Enable Core High voltage detector in active mode.
 *          false   -   Disable Core High voltage detector in active mode.
 *
 * @retval #kStatus_Success Enable/Disable Core High Voltage Detect successfully.
 */
status_t SPC_EnableActiveModeCoreHighVoltageDetect(SPC_Type *base, bool enable);

/*!
 * @brief Enables/Disables the Core High Voltage Detector in Low Power mode.
 *
 * This function enables/disables the Core High Voltage Detector.
 * If enabled the Core High Voltage detector. The Bandgap mode in
 * low power mode must be programmed so that Bandgap is enabled.
 *
 * @note If the CORE_LDO high voltage detect is enabled in Low Power mode, please note that the bandgap must be enabled
 * and the drive strength of each regulator must not set to low in low power mode.
 *
 * @param base SPC peripheral base address.
 * @param enable Enable/Disable Core HVD.
 *          true    -   Enable Core High voltage detector in low power mode.
 *          false   -   Disable Core High voltage detector in low power mode.
 *
 * @retval #kStatus_Success Enable/Disable Core High Voltage Detect in low power mode successfully.
 */
status_t SPC_EnableLowPowerModeCoreHighVoltageDetect(SPC_Type *base, bool enable);
#endif /* FSL_FEATURE_MCX_SPC_HAS_COREVDD_HVD */

/*! @} */

/*!
 * @name Voltage detect configuration for System Voltage domain
 * @{
 */
/*!
 * @brief Set system VDD Low-voltage level selection.
 *
 * This function selects the system VDD low-voltage level. Changing system VDD low-voltage level
 * must be done after disabling the System VDD low voltage reset and interrupt.
 *
 * @deprecated In latest RM, reserved for all devices, will removed in next release.
 *
 * @param base SPC peripheral base address.
 * @param level System VDD Low-Voltage level selection.
 */
void SPC_SetSystemVDDLowVoltageLevel(SPC_Type *base, spc_low_voltage_level_select_t level);

/*!
 * @brief Configs SYS voltage detect options.
 *
 * This function config SYS voltage detect options.
 * @note: Setting both the voltage detect interrupt and reset
 *       enable will cause interrupt to be generated on exit from reset.
 *       If those conditioned is not desired, interrupt/reset so only one is enabled.
 *
 * @param base       SPC peripheral base address.
 * @param config     Pointer to spc_system_voltage_detect_config_t structure.
 */
void SPC_SetSystemVoltageDetectConfig(SPC_Type *base, const spc_system_voltage_detect_config_t *config);

/*!
 * @brief Lock System voltage detect reset setting.
 *
 * This function locks system voltage detect reset setting. After invoking this function
 * any configuration of System Voltage detect reset will be ignored.
 *
 * @param base SPC peripheral base address.
 */
static inline void SPC_LockSystemVoltageDetectResetSetting(SPC_Type *base)
{
    base->VD_SYS_CFG |= SPC_VD_SYS_CFG_LOCK_MASK;
}

/*!
 * @brief Unlock System voltage detect reset setting.
 *
 * This function unlocks system voltage detect reset setting. If locks the System
 * voltage detect reset setting, invoking this function to unlock.
 *
 * @param base SPC peripheral base address.
 */
static inline void SPC_UnlockSystemVoltageDetectResetSetting(SPC_Type *base)
{
    base->VD_SYS_CFG &= ~SPC_VD_SYS_CFG_LOCK_MASK;
}

/*!
 * @brief Enables/Disables the System High Voltage Detector in Active mode.
 *
 * @note If the System_LDO high voltage detect is enabled in Active mode, please note that the bandgap must be enabled
 * and the drive strength of each regulator must not set to low in Active mode.
 *
 * @param base SPC peripheral base address.
 * @param enable Enable/Disable System HVD.
 *          true    -   Enable System High voltage detector in active mode.
 *          false   -   Disable System High voltage detector in active mode.
 *
 * @retval #kStatus_Success Enable/Disable System High Voltage Detect successfully.
 */
status_t SPC_EnableActiveModeSystemHighVoltageDetect(SPC_Type *base, bool enable);

/*!
 * @brief Enables/Disable the System Low Voltage Detector in Active mode.
 *
 * @note If the System_LDO low voltage detect is enabled in Active mode,
 * please note that the bandgap must be enabled and the drive strength of each
 * regulator must not set to low in Active mode.
 *
 * @param base SPC peripheral base address.
 * @param enable Enable/Disable System LVD.
 *          true    -   Enable System Low voltage detector in active mode.
 *          false   -   Disable System Low voltage detector in active mode.
 *
 * @retval #kStatus_Success Enable/Disable the System Low Voltage Detect successfully.
 */
status_t SPC_EnableActiveModeSystemLowVoltageDetect(SPC_Type *base, bool enable);

/*!
 * @brief Enables/Disables the System High Voltage Detector in Low Power mode.
 *
 * @note If the System_LDO high voltage detect is enabled in Low Power mode, please note
 * that the bandgap must be enabled and the drive strength of each regulator must
 * not set to low in Low Power  mode.
 *
 * @param base SPC peripheral base address.
 * @param enable Enable/Disable System HVD.
 *          true    -   Enable System High voltage detector in low power mode.
 *          false   -   Disable System High voltage detector in low power mode.
 *
 * @retval #kStatus_Success Enable/Disable System High Voltage Detect in low power mode successfully.
 */
status_t SPC_EnableLowPowerModeSystemHighVoltageDetect(SPC_Type *base, bool enable);

/*!
 * @brief Enables/Disables the System Low Voltage Detector in Low Power mode.
 *
 * @note If the System_LDO low voltage detect is enabled in Low Power mode,
 * please note that the bandgap must be enabled and the drive strength of each
 * regulator must not set to low in Low Power mode.
 *
 * @param base SPC peripheral base address.
 * @param enable Enable/Disable System HVD.
 *          true    -   Enable System Low voltage detector in low power mode.
 *          false   -   Disable System Low voltage detector in low power mode.
 *
 * @retval #kStatus_Success Enables System Low Voltage Detect in low power mode successfully.
 */
status_t SPC_EnableLowPowerModeSystemLowVoltageDetect(SPC_Type *base, bool enable);

/*! @} */

#if (defined(FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD) && FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD)
/*!
 * @name Voltage detect configuration for IO voltage domain
 * @{
 */
/*!
 * @brief Set IO VDD Low-Voltage level selection.
 *
 * This function selects the IO VDD Low-voltage level. Changing IO VDD low-voltage level
 * must be done after disabling the IO VDD low voltage reset and interrupt.
 *
 * @param base SPC peripheral base address.
 * @param level IO VDD Low-voltage level selection.
 */
void SPC_SetIOVDDLowVoltageLevel(SPC_Type *base, spc_low_voltage_level_select_t level);

/*!
 * @brief Configs IO voltage detect options.
 *
 * This function config IO voltage detect options.
 * @note: Setting both the voltage detect interrupt and reset
 *       enable will cause interrupt to be generated on exit from reset.
 *       If those conditioned is not desired, interrupt/reset so only one is enabled.
 *
 * @param base       SPC peripheral base address.
 * @param config     Pointer to spc_voltage_detect_config_t structure.
 */
void SPC_SetIOVoltageDetectConfig(SPC_Type *base, const spc_io_voltage_detect_config_t *config);

/*!
 * @brief Lock IO Voltage detect reset setting.
 *
 * This function locks IO voltage detect reset setting. After invoking this function
 * any configuration of system voltage detect reset will be ignored.
 *
 * @param base SPC peripheral base address.
 */
static inline void SPC_LockIOVoltageDetectResetSetting(SPC_Type *base)
{
    base->VD_IO_CFG |= SPC_VD_IO_CFG_LOCK_MASK;
}

/*!
 * @brief Unlock IO voltage detect reset setting.
 *
 * This function unlocks IO voltage detect reset setting. If locks the IO
 * voltage detect reset setting, invoking this function to unlock.
 *
 * @param base SPC peripheral base address.
 */
static inline void SPC_UnlockIOVoltageDetectResetSetting(SPC_Type *base)
{
    base->VD_IO_CFG &= ~SPC_VD_IO_CFG_LOCK_MASK;
}

/*!
 * @brief Enables/Disables the IO High Voltage Detector in Active mode.
 *
 * @note If the IO high voltage detect is enabled in Active mode, please note that the bandgap must be enabled
 * and the drive strength of each regulator must not set to low in Active mode.
 *
 * @param base SPC peripheral base address.
 * @param enable Enable/Disable IO HVD.
 *          true    -   Enable IO High voltage detector in active mode.
 *          false   -   Disable IO High voltage detector in active mode.
 *
 * @retval #kStatus_Success Enable/Disable IO High Voltage Detect successfully.
 */
status_t SPC_EnableActiveModeIOHighVoltageDetect(SPC_Type *base, bool enable);

/*!
 * @brief Enables/Disables the IO Low Voltage Detector in Active mode.
 *
 * @note If the IO low voltage detect is enabled in Active mode, please note that the bandgap must be enabled
 * and the drive strength of each regulator must not set to low in Active mode.
 *
 * @param base SPC peripheral base address.
 * @param enable Enable/Disable IO LVD.
 *          true    -   Enable IO Low voltage detector in active mode.
 *          false   -   Disable IO Low voltage detector in active mode.
 *
 * @retval #kStatus_Success Enable IO Low Voltage Detect successfully.
 */
status_t SPC_EnableActiveModeIOLowVoltageDetect(SPC_Type *base, bool enable);

/*!
 * @brief Enables/Disables the IO High Voltage Detector in Low Power mode.
 *
 * @note If the IO high voltage detect is enabled in Low Power mode, please note that the bandgap must be enabled
 * and the drive strength of each regulator must not set to low in Low Power mode.
 *
 * @param base SPC peripheral base address.
 * @param enable Enable/Disable IO HVD.
 *          true    -   Enable IO High voltage detector in low power mode.
 *          false   -   Disable IO High voltage detector in low power mode.
 *
 * @retval #kStatus_Success Enable IO High Voltage Detect in low power mode successfully.
 */
status_t SPC_EnableLowPowerModeIOHighVoltageDetect(SPC_Type *base, bool enable);

/*!
 * @brief Enables/Disables the IO Low Voltage Detector in Low Power mode.
 *
 * @note If the IO low voltage detect is enabled in Low Power mode, please note that the bandgap must be enabled
 * and the drive strength of each regulator must not set to low in Low Power mode.
 *
 * @param base SPC peripheral base address.
 * @param enable Enable/Disable IO LVD.
 *          true    -   Enable IO Low voltage detector in low power mode.
 *          false   -   Disable IO Low voltage detector in low power mode.
 *
 * @retval #kStatus_Success Enable/Disable IO Low Voltage Detect in low power mode successfully.
 */
status_t SPC_EnableLowPowerModeIOLowVoltageDetect(SPC_Type *base, bool enable);

/*! @} */

#endif /* FSL_FEATURE_MCX_SPC_HAS_IOVDD_VD */

/*!
 * @name External Voltage domains configuration
 * @{
 */
/*!
 * @brief Configs external voltage domains
 *
 * This function configs external voltage domains isolation.
 *
 * @param base SPC peripheral base address.
 * @param lowPowerIsoMask The mask of external domains isolate enable during low power mode. Please read the Reference
 * Manual for the Bitmap.
 * @param IsoMask The mask of external domains isolate. Please read the Reference Manual for the Bitmap.
 */
void SPC_SetExternalVoltageDomainsConfig(SPC_Type *base, uint8_t lowPowerIsoMask, uint8_t IsoMask);

/*!
 * @brief Gets External Domains status.
 *
 * @param base SPC peripheral base address.
 * @return The status of each external domain.
 */
static inline uint8_t SPC_GetExternalDomainsStatus(SPC_Type *base)
{
    return (uint8_t)(base->EVD_CFG >> SPC_EVD_CFG_REG_EVDSTAT_SHIFT);
}

/*! @} */

/*!
 * @name Low Level APIs To Set CORE LDO Regulator
 * @{
 */

#if (defined(FSL_FEATURE_MCX_SPC_HAS_CNTRL_REG) && FSL_FEATURE_MCX_SPC_HAS_CNTRL_REG)
/*!
 * @brief Enable/Disable Core LDO regulator.
 *
 * @note The CORE LDO enable bit is write-once.
 *
 * @param base SPC peripheral base address.
 * @param enable Enable/Disable CORE LDO Regulator.
 *          true   -   Enable CORE LDO Regulator.
 *          false  -   Disable CORE LDO Regulator.
 */
static inline void SPC_EnableCoreLDORegulator(SPC_Type *base, bool enable)
{
    if (enable)
    {
        base->CNTRL |= SPC_CNTRL_CORELDO_EN_MASK;
    }
    else
    {
        /*
         * $Branch Coverage Justification$
         * If CORE_LDO is disabled, all RAMs data will powered off.
         */
        base->CNTRL &= ~SPC_CNTRL_CORELDO_EN_MASK;
    }
}
#endif /* FSL_FEATURE_MCX_SPC_HAS_CNTRL_REG */

#if (defined(FSL_FEATURE_MCX_SPC_HAS_DPDOWN_PULLDOWN_DISABLE_BIT) && \
     FSL_FEATURE_MCX_SPC_HAS_DPDOWN_PULLDOWN_DISABLE_BIT)
/*!
 * @brief Enable/Disable the CORE LDO Regulator pull down in Deep Power Down.
 *
 * @note This function only useful when enabled the CORE LDO Regulator.
 *
 * @param base SPC peripheral base address.
 * @param pulldown Enable/Disable CORE LDO pulldown in Deep Power Down mode.
 *          true    -   CORE LDO Regulator will discharge in Deep Power Down mode.
 *          false   -   CORE LDO Regulator will not discharge in Deep Power Down mode.
 */
static inline void SPC_PullDownCoreLDORegulator(SPC_Type *base, bool pulldown)
{
    if (pulldown)
    {
        base->CORELDO_CFG &= ~SPC_CORELDO_CFG_DPDOWN_PULLDOWN_DISABLE_MASK;
    }
    else
    {
        base->CORELDO_CFG |= SPC_CORELDO_CFG_DPDOWN_PULLDOWN_DISABLE_MASK;
    }
}
#endif /* FSL_FEATURE_MCX_SPC_HAS_DPDOWN_PULLDOWN_DISABLE_BIT */

/*!
 * @brief Configs Core LDO Regulator in Active mode.
 *
 * @note The bandgap must be enabled before invoking this function.
 * @note To set Core LDO as low drive strength, all HVDs/LVDs must be disabled previously.
 *
 * @param base SPC peripheral base address.
 * @param option Pointer to the spc_active_mode_core_ldo_option_t structure.
 *
 * @retval kStatus_Success Config Core LDO regulator in Active power mode successful.
 * @retval kStatus_SPC_Busy The SPC instance is busy to execute any type of power mode transition.
 * @retval kStatus_SPC_BandgapModeWrong Bandgap should be enabled before invoking this function.
 * @retval kStatus_SPC_CORELDOLowDriveStrengthIgnore To set Core LDO as low drive strength,
 *                                                  all LVDs/HVDs must be disabled before invoking this function.
 */
status_t SPC_SetActiveModeCoreLDORegulatorConfig(SPC_Type *base, const spc_active_mode_core_ldo_option_t *option);

/*!
 * @brief Set Core LDO Regulator Voltage level in Active mode.
 *
 * @param base SPC peripheral base address.
 * @param voltageLevel Specify the voltage level of CORE LDO Regulator in Active mode, please
        refer to @ref spc_core_ldo_voltage_level_t.
 *
 * @note In active mode, the Core LDO voltage level should only be changed when the
 *  Core LDO is in normal drive strength.
 *
 * @note Update Core LDO voltage level will set Busy flag,
 *      this function return only when busy flag is cleared by hardware
 *
 * @retval kStatus_SPC_CORELDOVoltageSetFail  The drive strength of Core LDO is not normal.
 * @retval kStatus_Success Set Core LDO regulator voltage level in Active power mode successful.
 */
status_t SPC_SetActiveModeCoreLDORegulatorVoltageLevel(SPC_Type *base, spc_core_ldo_voltage_level_t voltageLevel);

/*!
 * @brief Gets CORE LDO Regulator Voltage level.
 *
 * This function returns the voltage level of CORE LDO Regulator in Active mode.
 *
 * @param base SPC peripheral base address.
 * @return Voltage level of CORE LDO in type of @ref spc_core_ldo_voltage_level_t enumeration.
 */
static inline spc_core_ldo_voltage_level_t SPC_GetActiveModeCoreLDOVDDVoltageLevel(SPC_Type *base)
{
    return (spc_core_ldo_voltage_level_t)(uint32_t)((base->ACTIVE_CFG & SPC_ACTIVE_CFG_CORELDO_VDD_LVL_MASK) >>
                                                    SPC_ACTIVE_CFG_CORELDO_VDD_LVL_SHIFT);
}

#if (defined(FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS) && FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS)
/*!
 * @brief Set Core LDO VDD Regulator Drive Strength in Active mode.
 *
 * @param base SPC peripheral base address.
 * @param driveStrength Specify the drive strength of CORE LDO Regulator in Active mode, please
        refer to @ref spc_core_ldo_drive_strength_t.
 *
 * @retval #kStatus_Success Set Core LDO regulator drive strength in Active power mode successful.
 * @retval #kStatus_SPC_CORELDOLowDriveStrengthIgnore If any voltage detect enabled,
            core_ldo's drive strength can not set to low.
 * @retval #kStatus_SPC_BandgapModeWrong The selected bandgap mode is not allowed.
 */
status_t SPC_SetActiveModeCoreLDORegulatorDriveStrength(SPC_Type *base, spc_core_ldo_drive_strength_t driveStrength);

/*!
 * @brief Gets CORE LDO VDD Regulator Drive Strength in Active mode.
 *
 * @param base SPC peripheral base address.
 * @return Drive Strength of CORE LDO regulator in Active mode, please refer to @ref spc_core_ldo_drive_strength_t.
 */
static inline spc_core_ldo_drive_strength_t SPC_GetActiveModeCoreLDODriveStrength(SPC_Type *base)
{
    return (spc_core_ldo_drive_strength_t)(uint32_t)((base->ACTIVE_CFG & SPC_ACTIVE_CFG_CORELDO_VDD_DS_MASK) >>
                                                     SPC_ACTIVE_CFG_CORELDO_VDD_DS_SHIFT);
}
#endif /* defined(FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS) && FSL_FEATURE_SPC_HAS_CORELDO_VDD_DS */

/*!
 * @brief Configs CORE LDO Regulator in low power mode
 *
 * This function configs CORE LDO Regulator in Low Power mode.
 * If CORE LDO VDD Drive Strength is set to Normal, the CORE LDO VDD regulator voltage
 * level in Active mode must be equal to the voltage level in Low power mode. And the Bandgap
 * must be programmed to select bandgap enabled.
 * Core VDD voltage levels for the Core LDO low power regulator can only be changed when the CORE
 * LDO Drive Strength set as Normal.
 *
 * @param base SPC peripheral base address.
 * @param option Pointer to the spc_lowpower_mode_core_ldo_option_t structure.
 *
 * @retval #kStatus_Success Config Core LDO regulator in power mode successfully.
 * @retval #kStatus_SPC_Busy The SPC instance is busy to execute any type of power mode transition.
 * @retval #kStatus_SPC_CORELDOLowDriveStrengthIgnore Set driver strength to low will be ignored.
 * @retval #kStatus_SPC_CORELDOVoltageSetFail. Fail to change Core LDO voltage level.
 */
status_t SPC_SetLowPowerModeCoreLDORegulatorConfig(SPC_Type *base, const spc_lowpower_mode_core_ldo_option_t *option);

/*!
 * @brief Set Core LDO VDD Regulator Voltage level in Low power mode.
 *
 * @note If CORE LDO's drive strength is set to Normal, the CORE LDO VDD regulator voltage in active mode and low power
 *  mode must be same.
 * @note Voltage level for the CORE LDO in low power mode can only be changed when the CORE LDO Drive Strength set as
 * Normal.
 *
 * @param base SPC peripheral base address.
 * @param voltageLevel Voltage level of CORE LDO Regulator in Low power mode, please
        refer to @ref spc_core_ldo_voltage_level_t.
 *
 * @retval #kStatus_SPC_CORELDOVoltageWrong Voltage level in active mode and low power mode is not same.
 * @retval #kStatus_Success Set Core LDO regulator voltage level in Low power mode successful.
 * @retval #kStatus_SPC_CORELDOVoltageSetFail Fail to update voltage level because drive strength is incorrect.
 */
status_t SPC_SetLowPowerModeCoreLDORegulatorVoltageLevel(SPC_Type *base, spc_core_ldo_voltage_level_t voltageLevel);

/*!
 * @brief Gets the CORE LDO VDD Regulator Voltage Level for Low Power modes.
 *
 * @param base SPC peripheral base address.
 * @return The CORE LDO VDD Regulator's voltage level.
 */
static inline spc_core_ldo_voltage_level_t SPC_GetLowPowerCoreLDOVDDVoltageLevel(SPC_Type *base)
{
    return ((spc_core_ldo_voltage_level_t)(uint32_t)((base->LP_CFG & SPC_LP_CFG_CORELDO_VDD_LVL_MASK) >>
                                                     SPC_LP_CFG_CORELDO_VDD_LVL_SHIFT));
}

/*!
 * @brief Set Core LDO VDD Regulator Drive Strength in Low power mode.
 *
 * @param base SPC peripheral base address.
 * @param driveStrength Specify drive strength of CORE LDO in low power mode.
 *
 * @retval #kStatus_SPC_CORELDOLowDriveStrengthIgnore Some voltage detect enabled, CORE LDO's drive strength can not set
 *           as low.
 * @retval #kStatus_Success Set Core LDO regulator drive strength in Low power mode successful.
 * @retval #kStatus_SPC_BandgapModeWrong Bandgap is disabled when attempt to set CORE LDO work as normal drive strength.
 */
status_t SPC_SetLowPowerModeCoreLDORegulatorDriveStrength(SPC_Type *base, spc_core_ldo_drive_strength_t driveStrength);

/*!
 * @brief Gets CORE LDO VDD Drive Strength for Low Power modes.
 *
 * @param base SPC peripheral base address.
 * @return The CORE LDO's VDD Drive Strength.
 */
static inline spc_core_ldo_drive_strength_t SPC_GetLowPowerCoreLDOVDDDriveStrength(SPC_Type *base)
{
    return (spc_core_ldo_drive_strength_t)(uint32_t)((base->LP_CFG & SPC_LP_CFG_CORELDO_VDD_DS_MASK) >>
                                                     SPC_LP_CFG_CORELDO_VDD_DS_SHIFT);
}

#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO)
/*!
 * @name Low Level APIs To Set System LDO Regulator
 * @{
 */

/*!
 * @brief Enable/Disable System LDO regulator.
 *
 * @note The SYSTEM LDO enable bit is write-once.
 *
 * @param base SPC peripheral base address.
 * @param enable Enable/Disable System LDO Regulator.
 *          true     -   Enable System LDO Regulator.
 *          false    -    Disable System LDO Regulator.
 */
static inline void SPC_EnableSystemLDORegulator(SPC_Type *base, bool enable)
{
    if (enable)
    {
        base->CNTRL |= SPC_CNTRL_SYSLDO_EN_MASK;
    }
    else
    {
        /*
         * $Branch Coverage Justification$
         * If SYSTEM_LDO is disabled, may cause some unexpected issues.
         */
        base->CNTRL &= ~SPC_CNTRL_SYSLDO_EN_MASK;
    }
}

/*!
 * @brief Enable/Disable current sink feature of System LDO Regulator.
 *
 * @param base SPC peripheral base address.
 * @param sink Enable/Disable current sink feature.
 *          true    -   Enable current sink feature of System LDO Regulator.
 *          false   -   Disable current sink feature of System LDO Regulator.
 */
static inline void SPC_EnableSystemLDOSinkFeature(SPC_Type *base, bool sink)
{
    if (sink)
    {
        base->SYSLDO_CFG |= SPC_SYSLDO_CFG_ISINKEN_MASK;
    }
    else
    {
        base->SYSLDO_CFG &= ~SPC_SYSLDO_CFG_ISINKEN_MASK;
    }
}

/*!
 * @brief Configs System LDO VDD Regulator in Active mode.
 *
 * @note If System LDO VDD Drive Strength is set to Normal, the Bandgap mode in Active mode must be programmed
 * to a value that enables the bandgap.
 * @note If any voltage detects are kept enabled, configuration to set System LDO VDD drive strength to low will
 * be ignored.
 * @note If select System LDO VDD Regulator voltage level to Over Drive Voltage, the Drive Strength of System LDO VDD
 * Regulator must be set to Normal otherwise the regulator Drive Strength will be forced to Normal.
 * @note If select System LDO VDD Regulator voltage level to Over Drive Voltage, the High voltage detect must be
 * disabled. Otherwise it will be fail to regulator to Over Drive Voltage.
 *
 * @param base SPC peripheral base address.
 * @param option Pointer to the spc_active_mode_sys_ldo_option_t structure.
 *
 * @retval #kStatus_Success Config System LDO regulator in Active power mode successful.
 * @retval #kStatus_SPC_Busy The SPC instance is busy to execute any type of power mode transition.
 * @retval #kStatus_SPC_BandgapModeWrong The bandgap is not enabled before invoking this function.
 * @retval #kStatus_SPC_SYSLDOOverDriveVoltageFail HVD of System VDD is not disable before setting to Over Drive
 * voltage.
 * @retval kStatus_SPC_SYSLDOLowDriveStrengthIgnore Set System LDO VDD regulator's driver strength to Low will be
 * ignored.
 */
status_t SPC_SetActiveModeSystemLDORegulatorConfig(SPC_Type *base, const spc_active_mode_sys_ldo_option_t *option);

/*!
 * @brief Set System LDO Regulator voltage level in Active mode.
 *
 * @note The system LDO regulator can only operate at the overdrive voltage level for a limited amount of time for the
 * life of chip.
 *
 * @param base SPC peripheral base address.
 * @param voltageLevel Specify the voltage level of System LDO Regulator in Active mode.
 *
 * @retval #kStatus_Success Set System LDO Regulator voltage level in Active mode successfully.
 * @retval #kStatus_SPC_SYSLDOOverDriveVoltageFail Must disable system LDO high voltage detector before specifying
 * overdrive voltage.
 */
status_t SPC_SetActiveModeSystemLDORegulatorVoltageLevel(SPC_Type *base, spc_sys_ldo_voltage_level_t voltageLevel);

/*!
 * @brief Get System LDO Regulator voltage level in Active mode.
 *
 * @param base SPC peripheral base address.
 * @return System LDO Regulator voltage level in Active mode, please refer to @ref spc_sys_ldo_voltage_level_t.
 */
static inline spc_sys_ldo_voltage_level_t SPC_GetActiveModeSystemLDORegulatorVoltageLevel(SPC_Type *base)
{
    return (spc_sys_ldo_voltage_level_t)(uint32_t)((base->ACTIVE_CFG & SPC_ACTIVE_CFG_SYSLDO_VDD_LVL_MASK) >>
                                                   SPC_ACTIVE_CFG_SYSLDO_VDD_LVL_SHIFT);
}

/*!
 * @brief Set System LDO Regulator Drive Strength in Active mode.
 *
 * @param base SPC peripheral base address.
 * @param driveStrength Specify the drive strength  of System LDO Regulator in Active mode.
 *
 * @retval #kStatus_Success Set System LDO Regulator drive strength in Active mode successfully.
 * @retval #kStatus_SPC_SYSLDOLowDriveStrengthIgnore Attempt to specify low drive strength is ignored due to any
            voltage detect feature is enabled in active mode.
 * @retval #kStatus_SPC_BandgapModeWrong Bandgap mode in Active mode must be programmed to a value that enables
            the bandgap if attempt to specify normal drive strength.
 */
status_t SPC_SetActiveModeSystemLDORegulatorDriveStrength(SPC_Type *base, spc_sys_ldo_drive_strength_t driveStrength);

/*!
 * @brief Get System LDO Regulator Drive Strength in Active mode.
 *
 * @param base SPC peripheral base address.
 * @return System LDO regulator drive strength in Active mode, please refer to @ref spc_sys_ldo_drive_strength_t.
 */
static inline spc_sys_ldo_drive_strength_t SPC_GetActiveModeSystemLDORegulatorDriveStrength(SPC_Type *base)
{
    return (spc_sys_ldo_drive_strength_t)(uint32_t)((base->ACTIVE_CFG & SPC_ACTIVE_CFG_SYSLDO_VDD_DS_MASK) >>
                                                    SPC_ACTIVE_CFG_SYSLDO_VDD_DS_SHIFT);
}

/*!
 * @brief Configs System LDO regulator in low power modes.
 *
 * This function configs System LDO regulator in low power modes.
 * If System LDO VDD Regulator Drive strength is set to normal, bandgap mode in low power
 * mode must be programmed to a value that enables the Bandgap.
 * If any High voltage detectors or Low Voltage detectors are kept enabled, configuration
 * to set System LDO Regulator drive strength as Low will be ignored.
 *
 * @param base SPC peripheral base address.
 * @param option Pointer to spc_lowpower_mode_sys_ldo_option_t structure.
 *
 * @retval #kStatus_Success Config System LDO regulator in Low Power Mode successfully.
 * @retval #kStatus_SPC_Busy The SPC instance is busy to execute any type of power mode transition.
 * @retval #kStatus_SPC_SYSLDOLowDriveStrengthIgnore Set driver strength to low will be ignored.
 */
status_t SPC_SetLowPowerModeSystemLDORegulatorConfig(SPC_Type *base, const spc_lowpower_mode_sys_ldo_option_t *option);

/*!
 * @brief Set System LDO Regulator drive strength in Low Power Mode.
 *
 * @param base SPC peripheral base address.
 * @param driveStrength Specify the drive strength of System LDO Regulator in Low Power Mode.
 *
 * @retval #kStatus_Success Set System LDO Regulator drive strength in Low Power Mode successfully.
 * @retval #kStatus_SPC_SYSLDOLowDriveStrengthIgnore Attempt to specify low drive strength is ignored due to any
            voltage detect feature is enabled in low power mode.
 * @retval #kStatus_SPC_BandgapModeWrong Bandgap mode in low power mode must be programmed to a value that enables
            the bandgap if attempt to specify normal drive strength.
 */
status_t SPC_SetLowPowerModeSystemLDORegulatorDriveStrength(SPC_Type *base, spc_sys_ldo_drive_strength_t driveStrength);

/*!
 * @brief Get System LDO Regulator drive strength in Low Power Mode.
 *
 * @param base SPC peripheral base address.
 * @return System LDO regulator drive strength in Low Power Mode, please refer to @ref spc_sys_ldo_drive_strength_t.
 */
static inline spc_sys_ldo_drive_strength_t SPC_GetLowPowerModeSystemLDORegulatorDriveStrength(SPC_Type *base)
{
    return (spc_sys_ldo_drive_strength_t)(uint32_t)((base->LP_CFG & SPC_LP_CFG_SYSLDO_VDD_DS_MASK) >>
                                                    SPC_LP_CFG_SYSLDO_VDD_DS_SHIFT);
}
/*! @} */
#endif /* FSL_FEATURE_MCX_SPC_HAS_SYS_LDO */

#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC) && FSL_FEATURE_MCX_SPC_HAS_DCDC)
/*!
 * @name Low Level APIs To Set DCDC Regulator
 * @{
 */

/*!
 * @brief Enable/Disable DCDC Regulator.
 *
 * @note The DCDC enable bit is write-once, settings only reset after a POR, LVD, or HVD event.
 *
 * @param base SPC peripheral base address.
 * @param enable Enable/Disable DCDC Regulator.
 *          true    -   Enable DCDC Regulator.
 *          false   -   Disable DCDC Regulator.
 */
static inline void SPC_EnableDCDCRegulator(SPC_Type *base, bool enable)
{
    if (enable)
    {
        base->CNTRL |= SPC_CNTRL_DCDC_EN_MASK;
    }
    else
    {
        /*
         * $Branch Coverage Justification$
         * If DCDC is disabled, all RAMs data will powered off.
         */
        base->CNTRL &= ~SPC_CNTRL_DCDC_EN_MASK;
    }
}

/*!
 * @brief Config DCDC Burst options
 *
 * @param base SPC peripheral base address.
 * @param config Pointer to spc_dcdc_burst_config_t structure.
 */
void SPC_SetDCDCBurstConfig(SPC_Type *base, spc_dcdc_burst_config_t *config);

/*!
 * @brief Trigger a software burst request to DCDC.
 *
 * @param base SPC peripheral base address.
 */
static inline void SPC_TriggerDCDCBurstRequest(SPC_Type *base)
{
    /* Blocking until previous DCDC burst completed. */
    while ((base->DCDC_BURST_CFG & SPC_DCDC_BURST_CFG_BURST_ACK_MASK) == 0UL)
    {
    }

    base->DCDC_BURST_CFG |= SPC_DCDC_BURST_CFG_BURST_REQ_MASK;
}

/*!
 * @brief Check if burst acknowledge flag is asserted.
 *
 * @param base SPC peripheral base address.
 *
 * @retval false DCDC burst not complete.
 * @retval true DCDC burst complete.
 */
static inline bool SPC_CheckDCDCBurstAck(SPC_Type *base)
{
    return ((base->DCDC_BURST_CFG & SPC_DCDC_BURST_CFG_BURST_ACK_MASK) != 0UL);
}

/*!
 * @brief Clear DCDC busrt acknowledge flag.
 *
 * @param base SPC periphral base address.
 */
static inline void SPC_ClearDCDCBurstAckFlag(SPC_Type *base)
{
    base->DCDC_BURST_CFG |= SPC_DCDC_BURST_CFG_BURST_ACK_MASK;
}

/*!
 * @brief Set the count value of the reference clock to configure the period of DCDC not active.
 *
 * @note This function is only useful when DCDC's drive strength is set as pulse refresh.
 * @note The pulse duration(time between on and off) is: reference clock period * (count + 2).
 *
 * @param base SPC peripheral base address.
 * @param count The count value, 16 bit width.
 */
void SPC_SetDCDCRefreshCount(SPC_Type *base, uint16_t count);

#if (defined(FSL_FEATURE_MCX_SPC_HAS_DCDC_CFG_BLEED_EN) && FSL_FEATURE_MCX_SPC_HAS_DCDC_CFG_BLEED_EN)
/*!
 * @brief Enable a bleed resistor to discharge DCDC output when DCDC is disabled.
 *
 * @param base SPC peripheral base address.
 * @param enable Used to enable/disable bleed resistor.
 */
static inline void SPC_EnableDCDCBleedResistor(SPC_Type *base, bool enable)
{
    if (enable)
    {
        base->DCDC_CFG |= SPC_DCDC_CFG_BLEED_EN_MASK;
    }
    else
    {
        base->DCDC_CFG &= ~SPC_DCDC_CFG_BLEED_EN_MASK;
    }
}
#endif /* FSL_FEATURE_MCX_SPC_HAS_DCDC_CFG_BLEED_EN */

/*!
 * @brief Configs DCDC_CORE Regulator in Active mode.
 *
 * @note When changing the DCDC output voltage level, take care to change the CORE LDO voltage level.
 *
 * @param base SPC peripheral base address.
 * @param option Pointer to the spc_active_mode_dcdc_option_t structure.
 *
 * @retval #kStatus_Success Config DCDC regulator in Active power mode successful.
 * @retval #kStatus_SPC_Busy The SPC instance is busy to execute any type of power mode transition.
 * @retval #kStatus_SPC_BandgapModeWrong Set DCDC_CORE Regulator drive strength to Normal, the Bandgap must be enabled.
 */
status_t SPC_SetActiveModeDCDCRegulatorConfig(SPC_Type *base, const spc_active_mode_dcdc_option_t *option);

/*!
 * @brief Set DCDC_CORE Regulator voltage level in Active mode.
 *
 * @note When changing the DCDC output voltage level, take care to change the CORE LDO voltage level.
 *
 * @param base SPC peripheral base address.
 * @param voltageLevel Specify the DCDC_CORE Regulator voltage level, please refer to @ref spc_dcdc_voltage_level_t.
 */
static inline void SPC_SetActiveModeDCDCRegulatorVoltageLevel(SPC_Type *base, spc_dcdc_voltage_level_t voltageLevel)
{
    base->ACTIVE_CFG =
        (base->ACTIVE_CFG & (~SPC_ACTIVE_CFG_DCDC_VDD_LVL_MASK)) | SPC_ACTIVE_CFG_DCDC_VDD_LVL(voltageLevel);
}

/*!
 * @brief Get DCDC_CORE Regulator voltage level in Active mode.
 *
 * @param base SPC peripheral base address.
 * @return DCDC_CORE Regulator voltage level, please refer to @ref spc_dcdc_voltage_level_t.
 */
static inline spc_dcdc_voltage_level_t SPC_GetActiveModeDCDCRegulatorVoltageLevel(SPC_Type *base)
{
    return (spc_dcdc_voltage_level_t)((uint32_t)((base->ACTIVE_CFG & SPC_ACTIVE_CFG_DCDC_VDD_LVL_MASK) >>
                                                 SPC_ACTIVE_CFG_DCDC_VDD_LVL_SHIFT));
}

/*!
 * @brief Set DCDC_CORE Regulator drive strength in Active mode.
 *
 * @note To set DCDC drive strength as Normal, the bandgap must be enabled.
 *
 * @param base SPC peripheral base address.
 * @param driveStrength Specify the DCDC_CORE regulator drive strength, please refer to @ref spc_dcdc_drive_strength_t.
 *
 * @retval #kStatus_Success Set DCDC_CORE Regulator drive strength in Active mode successfully.
 * @retval #kStatus_SPC_BandgapModeWrong Set DCDC_CORE Regulator drive strength to Normal, the Bandgap must be enabled.
 */
status_t SPC_SetActiveModeDCDCRegulatorDriveStrength(SPC_Type *base, spc_dcdc_drive_strength_t driveStrength);

/*!
 * @brief Get DCDC_CORE Regulator drive strength in Active mode.
 *
 * @param base SPC peripheral base address.
 * @return DCDC_CORE Regulator drive strength, please refer to @ref spc_dcdc_drive_strength_t.
 */
static inline spc_dcdc_drive_strength_t SPC_GetActiveModeDCDCRegulatorDriveStrength(SPC_Type *base)
{
    return (spc_dcdc_drive_strength_t)((uint32_t)((base->ACTIVE_CFG & SPC_ACTIVE_CFG_DCDC_VDD_DS_MASK) >>
                                                  SPC_ACTIVE_CFG_DCDC_VDD_DS_SHIFT));
}

/*!
 * @brief Configs DCDC_CORE Regulator in Low power modes.
 *
 * @note If DCDC_CORE Drive Strength is set to Normal, the Bandgap mode in Low Power mode must be programmed
 * to a value that enables the Bandgap.
 * @note In Deep Power Down mode, DCDC regulator is always turned off.
 *
 * @param base SPC peripheral base address.
 * @param option Pointer to the spc_lowpower_mode_dcdc_option_t structure.
 *
 * @retval #kStatus_Success Config DCDC regulator in low power mode successfully.
 * @retval #kStatus_SPC_Busy The SPC instance is busy to execute any type of power mode transition.
 * @retval #kStatus_SPC_BandgapModeWrong The bandgap mode setting in Low Power mode is wrong.
 */
status_t SPC_SetLowPowerModeDCDCRegulatorConfig(SPC_Type *base, const spc_lowpower_mode_dcdc_option_t *option);

/*!
 * @brief Set DCDC_CORE Regulator drive strength in Low power mode.
 *
 * @note To set drive strength as normal, the bandgap must be enabled.
 *
 * @param base SPC peripheral base address.
 * @param driveStrength Specify the DCDC_CORE Regulator drive strength, please refer to @ref spc_dcdc_drive_strength_t.
 *
 * @retval #kStatus_Success Set DCDC_CORE Regulator drive strength in Low power mode successfully.
 * @retval #kStatus_SPC_BandgapModeWrong Set DCDC_CORE Regulator drive strength to Normal, the Bandgap must be enabled.
 */
status_t SPC_SetLowPowerModeDCDCRegulatorDriveStrength(SPC_Type *base, spc_dcdc_drive_strength_t driveStrength);

/*!
 * @brief Get DCDC_CORE Regulator drive strength in Low power mode.
 *
 * @param base SPC peripheral base address.
 * @return DCDC_CORE Regulator drive strength, please refer to @ref spc_dcdc_drive_strength_t.
 */
static inline spc_dcdc_drive_strength_t SPC_GetLowPowerModeDCDCRegulatorDriveStrength(SPC_Type *base)
{
    return (spc_dcdc_drive_strength_t)((uint32_t)((base->LP_CFG & SPC_LP_CFG_DCDC_VDD_DS_MASK) >>
                                                  SPC_LP_CFG_DCDC_VDD_DS_SHIFT));
}

/*!
 * @brief Set DCDC_CORE Regulator voltage level in Low power mode.
 *
 * @note To change DCDC level in Low-Power mode:
 *          1. Configure LP_CFG[DCDC_VDD_LVL] to desired level;
 *          2. Configure LP_CFG[DCDC_VDD_DS] to low driver strength;
 *  	    3. Configure ACTIVE_CFG[DCDC_VDD_LVL] to same level programmed in #1.
 *
 * @note After invoking this function, the voltage level in active mode(wakeup from low power modes) also changed,
 * if it is necessary, please invoke SPC_SetActiveModeDCDCRegulatorVoltageLevel() to change to desried voltage level.
 *
 * @param base SPC peripheral base address.
 * @param voltageLevel Specify the DCDC_CORE Regulator voltage level, please refer to @ref spc_dcdc_voltage_level_t.
 */
static inline void SPC_SetLowPowerModeDCDCRegulatorVoltageLevel(SPC_Type *base, spc_dcdc_voltage_level_t voltageLevel)
{
    base->LP_CFG = (base->LP_CFG & (~SPC_LP_CFG_DCDC_VDD_LVL_MASK)) | SPC_LP_CFG_DCDC_VDD_LVL(voltageLevel);
    (void)SPC_SetLowPowerModeDCDCRegulatorDriveStrength(base, kSPC_DCDC_LowDriveStrength);
    SPC_SetActiveModeDCDCRegulatorVoltageLevel(base, voltageLevel);
}

/*!
 * @brief Get DCDC_CORE Regulator voltage level in Low power mode.
 *
 * @param base SPC peripheral base address.
 * @return DCDC_CORE Regulator voltage level, please refer to @ref spc_dcdc_voltage_level_t.
 */
static inline spc_dcdc_voltage_level_t SPC_GetLowPowerModeDCDCRegulatorVoltageLevel(SPC_Type *base)
{
    return (spc_dcdc_voltage_level_t)((uint32_t)((base->LP_CFG & SPC_LP_CFG_DCDC_VDD_LVL_MASK) >>
                                                 SPC_LP_CFG_DCDC_VDD_LVL_SHIFT));
}

/*! @} */
#endif /* FSL_FEATURE_MCX_SPC_HAS_DCDC */

#if defined(__cplusplus)
}
#endif /* __cplusplus */

/*! @} */

#endif /* FSL_SPC_H_ */