tinyUSB/hw/bsp/stm32f7/family.mk

UF2_FAMILY_ID = 0x53b80f00
ST_FAMILY = f7
DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver

ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver

include $(TOP)/$(BOARD_PATH)/board.mk
CPU_CORE ?= cortex-m7-fpsp

# ----------------------
# Port & Speed Selection
# ----------------------
RHPORT_SPEED ?= OPT_MODE_FULL_SPEED OPT_MODE_FULL_SPEED
RHPORT_DEVICE ?= 0
RHPORT_HOST ?= 0

# Determine RHPORT_DEVICE_SPEED if not defined
ifndef RHPORT_DEVICE_SPEED
ifeq ($(RHPORT_DEVICE), 0)
  RHPORT_DEVICE_SPEED = $(firstword $(RHPORT_SPEED))
else
  RHPORT_DEVICE_SPEED = $(lastword $(RHPORT_SPEED))
endif
endif

# Determine RHPORT_HOST_SPEED if not defined
ifndef RHPORT_HOST_SPEED
ifeq ($(RHPORT_HOST), 0)
  RHPORT_HOST_SPEED = $(firstword $(RHPORT_SPEED))
else
  RHPORT_HOST_SPEED = $(lastword $(RHPORT_SPEED))
endif
endif

# --------------
# Compiler Flags
# --------------
CFLAGS += \
  -DCFG_TUSB_MCU=OPT_MCU_STM32F7 \
	-DBOARD_TUD_RHPORT=${RHPORT_DEVICE} \
	-DBOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} \
	-DBOARD_TUH_RHPORT=${RHPORT_HOST} \
	-DBOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} \

#ifeq ($(PORT), 1)
#  ifeq ($(SPEED), high)
#    CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED
#    $(info "Using OTG_HS in HighSpeed mode")
#  else
#    CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED
#    $(info "Using OTG_HS in FullSpeed mode")
#  endif
#else
#  CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED
#  $(info "Using OTG_FS")
#endif

# GCC Flags
CFLAGS_GCC += \
  -flto \

# mcu driver cause following warnings
CFLAGS_GCC += -Wno-error=cast-align

LDFLAGS_GCC += \
  -nostdlib -nostartfiles \
  --specs=nosys.specs --specs=nano.specs

# -----------------
# Sources & Include
# -----------------

SRC_C += \
	src/portable/synopsys/dwc2/dcd_dwc2.c \
	src/portable/synopsys/dwc2/hcd_dwc2.c \
	src/portable/synopsys/dwc2/dwc2_common.c \
	$(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \
	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \
	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \
	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_dma.c \
	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \
	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \
	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \
	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \
	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c

INC += \
  $(TOP)/$(BOARD_PATH) \
	$(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
	$(TOP)/$(ST_CMSIS)/Include \
	$(TOP)/$(ST_HAL_DRIVER)/Inc

# Startup
SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_$(MCU_VARIANT).s
SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_$(MCU_VARIANT).s

# Linker
LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/$(MCU_VARIANT)_flash.icf