tinyUSB/src/portable/raspberrypi/rp2040/rp2040_usb.h

#ifndef RP2040_COMMON_H_
#define RP2040_COMMON_H_

#if defined(RP2040_USB_HOST_MODE) && defined(RP2040_USB_DEVICE_MODE)
#error TinyUSB device and host mode not supported at the same time
#endif

#include "common/tusb_common.h"

#include "pico.h"
#include "hardware/structs/usb.h"
#include "hardware/irq.h"
#include "hardware/resets.h"

#if defined(PICO_RP2040_USB_DEVICE_ENUMERATION_FIX) && !defined(TUD_OPT_RP2040_USB_DEVICE_ENUMERATION_FIX)
#define TUD_OPT_RP2040_USB_DEVICE_ENUMERATION_FIX PICO_RP2040_USB_DEVICE_ENUMERATION_FIX
#endif

// For memset
#include <string.h>

#if false && !defined(NDEBUG)
#define pico_trace(format,args...) printf(format, ## args)
#else
#define pico_trace(format,...) ((void)0)
#endif

#if false && !defined(NDEBUG)
#define pico_info(format,args...) printf(format, ## args)
#else
#define pico_info(format,...) ((void)0)
#endif

#if false && !defined(NDEBUG)
#define pico_warn(format,args...) printf(format, ## args)
#else
#define pico_warn(format,...) ((void)0)
#endif

// Hardware information per endpoint
struct hw_endpoint
{
    // Is this a valid struct
    bool configured;
    // EP direction
    bool in;
    // EP num (not including direction)
    uint8_t num;
    
    // Transfer direction (i.e. IN is rx for host but tx for device)
    // allows us to common up transfer functions
    bool rx;
    
    uint8_t ep_addr;
    uint8_t next_pid;

    // Endpoint control register
    io_rw_32 *endpoint_control;
    // Buffer control register
    io_rw_32 *buffer_control;

    // Buffer pointer in usb dpram
    uint8_t *hw_data_buf;

    // Have we been stalled
    bool stalled;

    // Current transfer information
    bool active;
    uint total_len;
    uint len;
    // Amount of data with the hardware
    uint transfer_size;
#ifdef RP2040_USB_HOST_MODE
    // Only needed for host mode
    bool last_buf;
    // HOST BUG. Host will incorrect write status to top half of buffer
    // control register when doing transfers > 1 packet
    uint8_t buf_sel;
#endif
    // User buffer in main memory
    uint8_t *user_buf;

    // Data needed from EP descriptor
    uint wMaxPacketSize;
    // Interrupt, bulk, etc
    uint8_t transfer_type;
    
#ifdef RP2040_USB_HOST_MODE
    // Only needed for host
    uint8_t dev_addr;
    bool sent_setup;
    // If interrupt endpoint
    uint8_t interrupt_num;
#endif
};

void rp2040_usb_init(void);

void hw_endpoint_reset_transfer(struct hw_endpoint *ep);
void _hw_endpoint_xfer(struct hw_endpoint *ep, uint8_t *buffer, uint16_t total_len, bool start);
void _hw_endpoint_start_next_buffer(struct hw_endpoint *ep);
void _hw_endpoint_xfer_start(struct hw_endpoint *ep, uint8_t *buffer, uint16_t total_len);
void _hw_endpoint_xfer_sync(struct hw_endpoint *ep);
bool _hw_endpoint_xfer_continue(struct hw_endpoint *ep);
void _hw_endpoint_buffer_control_update32(struct hw_endpoint *ep, uint32_t and_mask, uint32_t or_mask);
static inline uint32_t _hw_endpoint_buffer_control_get_value32(struct hw_endpoint *ep) {
    return *ep->buffer_control;
}
static inline void _hw_endpoint_buffer_control_set_value32(struct hw_endpoint *ep, uint32_t value) {
    return _hw_endpoint_buffer_control_update32(ep, 0, value);
}
static inline void _hw_endpoint_buffer_control_set_mask32(struct hw_endpoint *ep, uint32_t value) {
    return _hw_endpoint_buffer_control_update32(ep, ~value, value);
}
static inline void _hw_endpoint_buffer_control_clear_mask32(struct hw_endpoint *ep, uint32_t value) {
    return _hw_endpoint_buffer_control_update32(ep, ~value, 0);
}

static inline uintptr_t hw_data_offset(uint8_t *buf)
{
    // Remove usb base from buffer pointer
    return (uintptr_t)buf ^ (uintptr_t)usb_dpram;
}

extern const char *ep_dir_string[];

#endif