andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
Files
e09cf361048ec4a77ce6ec6ac35f1b8b2d62d76c
tinyUSB/hw/bsp/ra/linker/gcc/fsp.ld

717 lines
29 KiB
Plaintext
Raw Normal View History

add ra4m1_ek board
2023-03-16 22:39:00 +07:00
/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/
/*
XIP_SECONDARY_SLOT_IMAGE = 1;
*/
QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH);
OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH);
OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH);
/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */
__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0);
ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0;
ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0;
DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0;
DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0;
NS_OFFSET_START = DEFINED(NS_OFFSET_START) ? NS_OFFSET_START : 0;
NS_IMAGE_OFFSET = DEFINED(PROJECT_NONSECURE) ? NS_OFFSET_START : 0;
RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0;
RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0;
RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH;
RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH;
OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80;
/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings.
* Bootloader images do not configure option settings because they are owned by the bootloader.
* FSP_BOOTABLE_IMAGE is only defined in bootloader images. */
__bl_FSP_BOOTABLE_IMAGE = 1;
__bln_FSP_BOOTABLE_IMAGE = 1;
PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE);
USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE);
__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH :
FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH;
__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH;
__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH;
__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH;
__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH;
__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END :
__bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH;
__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END :
__bl_FLASH_NS_START - FLASH_APPLICATION_NSC_LENGTH;
__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH :
RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH;
__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH :
__bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH;
__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END :
__bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2;
__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START;
__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END :
FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2;
XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0;
FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START :
XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START :
FLASH_IMAGE_START;
LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH :
DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH :
FLASH_LENGTH;
/* Define memory regions. */
MEMORY
{
ITCM (rx) : ORIGIN = ITCM_START + NS_IMAGE_OFFSET, LENGTH = ITCM_LENGTH
DTCM (rwx) : ORIGIN = DTCM_START + NS_IMAGE_OFFSET, LENGTH = DTCM_LENGTH
FLASH (rx) : ORIGIN = FLASH_ORIGIN + NS_IMAGE_OFFSET, LENGTH = LIMITED_FLASH_LENGTH
RAM (rwx) : ORIGIN = RAM_START + NS_IMAGE_OFFSET, LENGTH = RAM_LENGTH
DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START + NS_IMAGE_OFFSET, LENGTH = DATA_FLASH_LENGTH
QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH
OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH
OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH
OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH
OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH
SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH
OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START + NS_IMAGE_OFFSET, LENGTH = OPTION_SETTING_LENGTH
OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START + NS_IMAGE_OFFSET, LENGTH = 0x18
OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + NS_IMAGE_OFFSET + 0x34, LENGTH = OPTION_SETTING_LENGTH - 0x34
OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START + NS_IMAGE_OFFSET, LENGTH = OPTION_SETTING_S_LENGTH
ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH
}
/* Library configurations */
GROUP(libgcc.a libc.a libm.a libnosys.a)
/* Linker script to place sections and symbol values. Should be used together
* with other linker script that defines memory regions FLASH and RAM.
* It references following symbols, which must be DEFINED in code:
* Reset_Handler : Entry of reset handler
*
* It defines following symbols, which code can use without definition:
* __exidx_start
* __exidx_end
* __copy_table_start__
* __copy_table_end__
* __zero_table_start__
* __zero_table_end__
* __etext
* __data_start__
* __preinit_array_start
* __preinit_array_end
* __init_array_start
* __init_array_end
* __fini_array_start
* __fini_array_end
* __data_end__
* __bss_start__
* __bss_end__
* __HeapLimit
* __StackLimit
* __StackTop
* __stack
* __Vectors_End
* __Vectors_Size
* __qspi_flash_start__
* __qspi_flash_end__
* __qspi_flash_code_size__
* __qspi_region_max_size__
* __qspi_region_start_address__
* __qspi_region_end_address__
* __ospi_device_0_start__
* __ospi_device_0_end__
* __ospi_device_0_code_size__
* __ospi_device_0_region_max_size__
* __ospi_device_0_region_start_address__
* __ospi_device_0_region_end_address__
* __ospi_device_1_start__
* __ospi_device_1_end__
* __ospi_device_1_code_size__
* __ospi_device_1_region_max_size__
* __ospi_device_1_region_start_address__
* __ospi_device_1_region_end_address__
*/
ENTRY(Reset_Handler)
SECTIONS
{
/* Initialized ITCM data. */
.itcm_data :
{
/* Start of ITCM Secure Trustzone region. */
__tz_ITCM_S = ABSOLUTE(ITCM_START);
/* All ITCM data start */
__itcm_data_start__ = .;
KEEP(*(.itcm_data*))
/* All ITCM data end */
__itcm_data_end__ = .;
/*
* Start of the ITCM Non-Secure Trustzone region.
* ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects.
*/
__tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end__, 8192);
} > ITCM
.text :
{
__tz_FLASH_S = ABSOLUTE(FLASH_START);
__ROM_Start = .;
/* Even though the vector table is not 256 entries (1KB) long, we still allocate that much
* space because ROM registers are at address 0x400 and there is very little space
* in between. */
KEEP(*(.fixed_vectors*))
KEEP(*(.application_vectors*))
__Vectors_End = .;
/* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */
. = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400;
KEEP(*(.rom_registers*))
/* Reserving 0x100 bytes of space for ROM registers. */
. = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500;
/* Allocate flash write-boundary-aligned
* space for sce9 wrapped public keys for mcuboot if the module is used.
*/
. = ALIGN(128);
KEEP(*(.mcuboot_sce9_key*))
*(.text*)
KEEP(*(.version))
KEEP(*(.init))
KEEP(*(.fini))
/* .ctors */
*crtbegin.o(.ctors)
*crtbegin?.o(.ctors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
*(SORT(.ctors.*))
*(.ctors)
/* .dtors */
*crtbegin.o(.dtors)
*crtbegin?.o(.dtors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
*(SORT(.dtors.*))
*(.dtors)
*(.rodata*)
__usb_dev_descriptor_start_fs = .;
KEEP(*(.usb_device_desc_fs*))
__usb_cfg_descriptor_start_fs = .;
KEEP(*(.usb_config_desc_fs*))
__usb_interface_descriptor_start_fs = .;
KEEP(*(.usb_interface_desc_fs*))
__usb_descriptor_end_fs = .;
__usb_dev_descriptor_start_hs = .;
KEEP(*(.usb_device_desc_hs*))
__usb_cfg_descriptor_start_hs = .;
KEEP(*(.usb_config_desc_hs*))
__usb_interface_descriptor_start_hs = .;
KEEP(*(.usb_interface_desc_hs*))
__usb_descriptor_end_hs = .;
KEEP(*(.eh_frame*))
__ROM_End = .;
} > FLASH = 0xFF
__Vectors_Size = __Vectors_End - __Vectors;
.ARM.extab :
{
*(.ARM.extab* .gnu.linkonce.armextab.*)
} > FLASH
__exidx_start = .;
.ARM.exidx :
{
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
} > FLASH
__exidx_end = .;
/* To copy multiple ROM to RAM sections,
* uncomment .copy.table section and,
* define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */
/*
.copy.table :
{
. = ALIGN(4);
__copy_table_start__ = .;
LONG (__etext)
LONG (__data_start__)
LONG (__data_end__ - __data_start__)
LONG (__etext2)
LONG (__data2_start__)
LONG (__data2_end__ - __data2_start__)
__copy_table_end__ = .;
} > FLASH
*/
/* To clear multiple BSS sections,
* uncomment .zero.table section and,
* define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */
/*
.zero.table :
{
. = ALIGN(4);
__zero_table_start__ = .;
LONG (__bss_start__)
LONG (__bss_end__ - __bss_start__)
LONG (__bss2_start__)
LONG (__bss2_end__ - __bss2_start__)
__zero_table_end__ = .;
} > FLASH
*/
__etext = .;
__tz_RAM_S = ORIGIN(RAM);
/* If DTC is used, put the DTC vector table at the start of SRAM.
This avoids memory holes due to 1K alignment required by it. */
.fsp_dtc_vector_table (NOLOAD) :
{
. = ORIGIN(RAM);
*(.fsp_dtc_vector_table)
} > RAM
/* Initialized data section. */
.data :
{
__data_start__ = .;
. = ALIGN(4);
__Code_In_RAM_Start = .;
KEEP(*(.code_in_ram*))
__Code_In_RAM_End = .;
*(vtable)
/* Don't use *(.data*) because it will place data meant for .data_flash in this section. */
*(.data.*)
*(.data)
. = ALIGN(4);
/* preinit data */
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP(*(.preinit_array))
PROVIDE_HIDDEN (__preinit_array_end = .);
. = ALIGN(4);
/* init data */
PROVIDE_HIDDEN (__init_array_start = .);
KEEP(*(SORT(.init_array.*)))
KEEP(*(.init_array))
PROVIDE_HIDDEN (__init_array_end = .);
. = ALIGN(4);
/* finit data */
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP(*(SORT(.fini_array.*)))
KEEP(*(.fini_array))
PROVIDE_HIDDEN (__fini_array_end = .);
KEEP(*(.jcr*))
. = ALIGN(4);
/* All data end */
__data_end__ = .;
} > RAM AT > FLASH
/* Start address of the initial values for .dtcm_data. */
__dtcm_data_init_start = __etext + __data_end__ - __data_start__;
/* Initialized DTCM data. */
.dtcm_data :
{
/* Start of DTCM Secure Trustzone region. */
__tz_DTCM_S = ABSOLUTE(DTCM_START);
/* Initialized DTCM data start */
__dtcm_data_start__ = .;
KEEP(*(.dtcm_data*))
/* Initialized DTCM data end */
__dtcm_data_end__ = .;
} > DTCM AT > FLASH
/* Uninitialized DTCM data. */
.dtcm_noinit (NOLOAD):
{
/* Uninitialized DTCM data start */
__dtcm_noinit_start = .;
KEEP(*(.dtcm_noinit*))
/* Uninitialized DTCM data end */
__dtcm_noinit_end = .;
/*
* Start of the DTCM Non-Secure Trustzone region.
* DTCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects.
*/
__tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_noinit_end, 8192);
} > DTCM
/* TrustZone Secure Gateway Stubs Section. */
/* Some arithmetic is needed to eliminate unnecessary FILL for secure projects. */
/* 1. Get the address to the next block after the .data section in FLASH. */
DATA_END = LOADADDR(.data) + SIZEOF(.data);
/* 2. Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block after .data */
SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(DATA_END, 1024);
/* 3. Manually specify the start location for .gnu.sgstubs */
.gnu.sgstubs SGSTUBS_LOC : ALIGN(1024)
{
__tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024);
_start_sg = .;
*(.gnu.sgstubs*)
. = ALIGN(32);
_end_sg = .;
} > FLASH
__tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768);
FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N;
/* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */
__tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH);
/* QSPI_FLASH section to be downloaded via debugger */
.qspi_flash :
{
__qspi_flash_start__ = .;
KEEP(*(.qspi_flash*))
KEEP(*(.code_in_qspi*))
__qspi_flash_end__ = .;
} > QSPI_FLASH
__qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__;
/* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */
__qspi_flash_code_addr__ = __etext + (__data_end__ - __data_start__);
.qspi_non_retentive : AT (__qspi_flash_code_addr__)
{
__qspi_non_retentive_start__ = .;
KEEP(*(.qspi_non_retentive*))
__qspi_non_retentive_end__ = .;
} > QSPI_FLASH
__qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__;
__qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */
__qspi_region_start_address__ = __qspi_flash_start__;
__qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__;
/* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */
__tz_QSPI_FLASH_N = __qspi_non_retentive_end__;
/* Support for OctaRAM */
.OSPI_DEVICE_0_NO_LOAD (NOLOAD):
{
. = ALIGN(4);
__ospi_device_0_start__ = .;
*(.ospi_device_0_no_load*)
. = ALIGN(4);
__ospi_device_0_end__ = .;
} > OSPI_DEVICE_0_RAM
.OSPI_DEVICE_1_NO_LOAD (NOLOAD):
{
. = ALIGN(4);
__ospi_device_1_start__ = .;
*(.ospi_device_1_no_load*)
. = ALIGN(4);
__ospi_device_1_end__ = .;
} > OSPI_DEVICE_1_RAM
/* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */
__tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0);
/* OSPI_DEVICE_0 section to be downloaded via debugger */
.OSPI_DEVICE_0 :
{
__ospi_device_0_start__ = .;
KEEP(*(.ospi_device_0*))
KEEP(*(.code_in_ospi_device_0*))
__ospi_device_0_end__ = .;
} > OSPI_DEVICE_0
__ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__;
/* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */
__ospi_device_0_code_addr__ = __etext + (__data_end__ - __data_start__);
.ospi_device_0_non_retentive : AT (__ospi_device_0_code_addr__)
{
__ospi_device_0_non_retentive_start__ = .;
KEEP(*(.ospi_device_0_non_retentive*))
__ospi_device_0_non_retentive_end__ = .;
} > OSPI_DEVICE_0
__ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__;
__ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */
__ospi_device_0_region_start_address__ = __ospi_device_0_start__;
__ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__;
/* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */
__tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__;
/* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */
__tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1);
/* OSPI_DEVICE_1 section to be downloaded via debugger */
.OSPI_DEVICE_1 :
{
__ospi_device_1_start__ = .;
KEEP(*(.ospi_device_1*))
KEEP(*(.code_in_ospi_device_1*))
__ospi_device_1_end__ = .;
} > OSPI_DEVICE_1
__ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__;
/* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */
__ospi_device_1_code_addr__ = __etext + (__data_end__ - __data_start__);
.ospi_device_1_non_retentive : AT (__ospi_device_1_code_addr__)
{
__ospi_device_1_non_retentive_start__ = .;
KEEP(*(.ospi_device_1_non_retentive*))
__ospi_device_1_non_retentive_end__ = .;
} > OSPI_DEVICE_1
__ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__;
__ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */
__ospi_device_1_region_start_address__ = __ospi_device_1_start__;
__ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__;
/* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */
__tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__;
.noinit (NOLOAD):
{
. = ALIGN(4);
__noinit_start = .;
KEEP(*(.noinit*))
. = ALIGN(8);
/* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */
KEEP(*(.heap.*))
__noinit_end = .;
} > RAM
.bss :
{
. = ALIGN(4);
__bss_start__ = .;
*(.bss*)
*(COMMON)
. = ALIGN(4);
__bss_end__ = .;
} > RAM
.heap (NOLOAD):
{
. = ALIGN(8);
__HeapBase = .;
rework ra build
2023-07-01 12:40:56 +07:00
PROVIDE(end = .);
add ra4m1_ek board
2023-03-16 22:39:00 +07:00
/* Place the STD heap here. */
KEEP(*(.heap))
__HeapLimit = .;
} > RAM
/* Stacks are stored in this section. */
.stack_dummy (NOLOAD):
{
. = ALIGN(8);
__StackLimit = .;
/* Main stack */
KEEP(*(.stack))
__StackTop = .;
/* Thread stacks */
KEEP(*(.stack*))
__StackTopAll = .;
} > RAM
PROVIDE(__stack = __StackTopAll);
/* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used
at run time for things such as ThreadX memory pool allocations. */
__RAM_segment_used_end__ = ALIGN(__StackTopAll , 4);
/* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects.
* If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary.
* In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */
__tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024);
/* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects.
* RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not
* specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary.
* In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */
__tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192);
/* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects.
* The EDMAC is a non-secure bus master and can only access non-secure RAM. */
.ns_buffer (NOLOAD):
{
/* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */
. = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .;
KEEP(*(.ns_buffer*))
} > RAM
/* Data flash. */
.data_flash :
{
. = ORIGIN(DATA_FLASH);
__tz_DATA_FLASH_S = .;
__Data_Flash_Start = .;
KEEP(*(.data_flash*))
__Data_Flash_End = .;
__tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024);
} > DATA_FLASH
/* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */
__tz_SDRAM_S = ORIGIN(SDRAM);
/* SDRAM */
.sdram (NOLOAD):
{
__SDRAM_Start = .;
KEEP(*(.sdram*))
KEEP(*(.frame*))
__SDRAM_End = .;
} > SDRAM
/* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */
__tz_SDRAM_N = __SDRAM_End;
/* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */
__tz_ID_CODE_S = ORIGIN(ID_CODE);
update linker
2023-07-01 16:40:47 +07:00
/* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool.
* Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE
* memory region between TrustZone projects. */
__tz_ID_CODE_N = __tz_ID_CODE_S;
add ra4m1_ek board
2023-03-16 22:39:00 +07:00
.id_code :
{
__ID_Code_Start = .;
KEEP(*(.id_code*))
__ID_Code_End = .;
} > ID_CODE
/* Symbol required for RA Configuration tool. */
__tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS);
.option_setting_ofs :
{
__OPTION_SETTING_OFS_Start = .;
KEEP(*(.option_setting_ofs0))
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start;
KEEP(*(.option_setting_ofs2))
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start;
KEEP(*(.option_setting_dualsel))
__OPTION_SETTING_OFS_End = .;
} > OPTION_SETTING_OFS = 0xFF
.option_setting_sas :
{
__OPTION_SETTING_SAS_Start = .;
KEEP(*(.option_setting_sas))
__OPTION_SETTING_SAS_End = .;
} > OPTION_SETTING_SAS = 0xFF
/* Symbol required for RA Configuration tool. */
__tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS);
.option_setting_ns :
{
__OPTION_SETTING_NS_Start = .;
KEEP(*(.option_setting_ofs1))
. = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start;
KEEP(*(.option_setting_ofs3))
. = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start;
KEEP(*(.option_setting_banksel))
. = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start;
KEEP(*(.option_setting_bps0))
. = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start;
KEEP(*(.option_setting_bps1))
. = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start;
KEEP(*(.option_setting_bps2))
. = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start;
KEEP(*(.option_setting_bps3))
. = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start;
KEEP(*(.option_setting_pbps0))
. = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start;
KEEP(*(.option_setting_pbps1))
. = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start;
KEEP(*(.option_setting_pbps2))
. = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start;
KEEP(*(.option_setting_pbps3))
__OPTION_SETTING_NS_End = .;
} > OPTION_SETTING = 0xFF
/* Symbol required for RA Configuration tool. */
__tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S);
.option_setting_s :
{
__OPTION_SETTING_S_Start = .;
KEEP(*(.option_setting_ofs1_sec))
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start;
KEEP(*(.option_setting_ofs3_sec))
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start;
KEEP(*(.option_setting_banksel_sec))
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start;
KEEP(*(.option_setting_bps_sec0))
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start;
KEEP(*(.option_setting_bps_sec1))
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start;
KEEP(*(.option_setting_bps_sec2))
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start;
KEEP(*(.option_setting_bps_sec3))
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start;
KEEP(*(.option_setting_pbps_sec0))
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start;
KEEP(*(.option_setting_pbps_sec1))
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start;
KEEP(*(.option_setting_pbps_sec2))
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start;
KEEP(*(.option_setting_pbps_sec3))
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start;
KEEP(*(.option_setting_ofs1_sel))
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start;
KEEP(*(.option_setting_ofs3_sel))
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start;
KEEP(*(.option_setting_banksel_sel))
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start;
KEEP(*(.option_setting_bps_sel0))
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start;
KEEP(*(.option_setting_bps_sel1))
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start;
KEEP(*(.option_setting_bps_sel2))
. = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start;
KEEP(*(.option_setting_bps_sel3))
__OPTION_SETTING_S_End = .;
} > OPTION_SETTING_S = 0xFF
/* Symbol required for RA Configuration tool. */
__tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End;
}
Reference in New Issue Copy Permalink