tinyUSB/src/device/dcd.h

/* 
 * The MIT License (MIT)
 *
 * Copyright (c) 2019 Ha Thach (tinyusb.org)
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 *
 * This file is part of the TinyUSB stack.
 */

/** \ingroup group_usbd
 * \defgroup group_dcd Device Controller Driver (DCD)
 *  @{ */

#ifndef _TUSB_DCD_H_
#define _TUSB_DCD_H_

#include "common/tusb_common.h"

#ifdef __cplusplus
 extern "C" {
#endif

typedef enum
{
  DCD_EVENT_INVALID = 0,
  DCD_EVENT_BUS_RESET,
  DCD_EVENT_UNPLUGGED,
  DCD_EVENT_SOF,
  DCD_EVENT_SUSPEND, // TODO LPM Sleep L1 support
  DCD_EVENT_RESUME,

  DCD_EVENT_SETUP_RECEIVED,
  DCD_EVENT_XFER_COMPLETE,

  // Not an DCD event, just a convenient way to defer ISR function
  USBD_EVENT_FUNC_CALL,

  DCD_EVENT_COUNT
} dcd_eventid_t;

typedef struct TU_ATTR_ALIGNED(4)
{
  uint8_t rhport;
  uint8_t event_id;

  union {
    // USBD_EVT_SETUP_RECEIVED
    tusb_control_request_t setup_received;

    // USBD_EVT_XFER_COMPLETE
    struct {
      uint8_t  ep_addr;
      uint8_t  result;
      uint32_t len;
    }xfer_complete;

    // USBD_EVENT_FUNC_CALL
    struct {
      void (*func) (void*);
      void* param;
    }func_call;
  };
} dcd_event_t;

//TU_VERIFY_STATIC(sizeof(dcd_event_t) <= 12, "size is not correct");

/*------------------------------------------------------------------*/
/* Device API
 *------------------------------------------------------------------*/

// Initialize controller to device mode
void dcd_init       (uint8_t rhport);

// Enable device interrupt
void dcd_int_enable (uint8_t rhport);

// Disable device interrupt
void dcd_int_disable(uint8_t rhport);

// Receive Set Address request, mcu port must also include status IN response
void dcd_set_address(uint8_t rhport, uint8_t dev_addr);

// Receive Set Configure request
void dcd_set_config (uint8_t rhport, uint8_t config_num);

// Wake up host
void dcd_remote_wakeup(uint8_t rhport);

//--------------------------------------------------------------------+
// Endpoint API
//--------------------------------------------------------------------+

// Configure endpoint's registers according to descriptor
bool dcd_edpt_open        (uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc);

// Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack
bool dcd_edpt_xfer        (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes);

// Stall endpoint
void dcd_edpt_stall       (uint8_t rhport, uint8_t ep_addr);

// clear stall, data toggle is also reset to DATA0
void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr);

//--------------------------------------------------------------------+
// Event API (Implemented by device stack)
//--------------------------------------------------------------------+

// Called by DCD to notify device stack
extern void dcd_event_handler(dcd_event_t const * event, bool in_isr);

// helper to send bus signal event
extern void dcd_event_bus_signal (uint8_t rhport, dcd_eventid_t eid, bool in_isr);

// helper to send setup received
extern void dcd_event_setup_received(uint8_t rhport, uint8_t const * setup, bool in_isr);

// helper to send transfer complete event
extern void dcd_event_xfer_complete (uint8_t rhport, uint8_t ep_addr, uint32_t xferred_bytes, uint8_t result, bool in_isr);

#ifdef __cplusplus
 }
#endif

#endif /* _TUSB_DCD_H_ */

/// @}