498 lines
28 KiB
C
498 lines
28 KiB
C
|
/***********************************************************************************************************************
|
||
|
|
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||
|
|
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||
|
|
**********************************************************************************************************************/
|
||
|
|
|
||
|
|
/*
|
||
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||
|
|
!!GlobalInfo
|
||
|
|
product: Pins v13.1
|
||
|
|
processor: MIMXRT1064xxxxA
|
||
|
|
package_id: MIMXRT1064DVL6A
|
||
|
|
mcu_data: ksdk2_0
|
||
|
|
processor_version: 13.0.2
|
||
|
|
board: MIMXRT1064-EVK
|
||
|
|
pin_labels:
|
||
|
|
- {pin_num: F14, pin_signal: GPIO_AD_B0_09, label: 'JTAG_TDI/J21[5]/ENET_RST/J22[5]', identifier: USER_LED}
|
||
|
|
- {pin_num: L6, pin_signal: WAKEUP, label: SD_PWREN, identifier: USER_BUTTON}
|
||
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "fsl_common.h"
|
||
|
|
#include "fsl_iomuxc.h"
|
||
|
|
#include "fsl_gpio.h"
|
||
|
|
#include "pin_mux.h"
|
||
|
|
|
||
|
|
/* FUNCTION ************************************************************************************************************
|
||
|
|
*
|
||
|
|
* Function Name : BOARD_InitBootPins
|
||
|
|
* Description : Calls initialization functions.
|
||
|
|
*
|
||
|
|
* END ****************************************************************************************************************/
|
||
|
|
void BOARD_InitBootPins(void) {
|
||
|
|
BOARD_InitPins();
|
||
|
|
BOARD_InitDEBUG_UARTPins();
|
||
|
|
}
|
||
|
|
|
||
|
|
/*
|
||
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||
|
|
BOARD_InitPins:
|
||
|
|
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
|
||
|
|
- pin_list:
|
||
|
|
- {pin_num: F14, peripheral: GPIO1, signal: 'gpio_io, 09', pin_signal: GPIO_AD_B0_09, direction: OUTPUT, pull_keeper_select: Keeper}
|
||
|
|
- {pin_num: L6, peripheral: GPIO5, signal: 'gpio_io, 00', pin_signal: WAKEUP, direction: INPUT}
|
||
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* FUNCTION ************************************************************************************************************
|
||
|
|
*
|
||
|
|
* Function Name : BOARD_InitPins
|
||
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
||
|
|
*
|
||
|
|
* END ****************************************************************************************************************/
|
||
|
|
void BOARD_InitPins(void) {
|
||
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||
|
|
CLOCK_EnableClock(kCLOCK_IomuxcSnvs);
|
||
|
|
|
||
|
|
/* GPIO configuration of USER_LED on GPIO_AD_B0_09 (pin F14) */
|
||
|
|
gpio_pin_config_t USER_LED_config = {
|
||
|
|
.direction = kGPIO_DigitalOutput,
|
||
|
|
.outputLogic = 0U,
|
||
|
|
.interruptMode = kGPIO_NoIntmode
|
||
|
|
};
|
||
|
|
/* Initialize GPIO functionality on GPIO_AD_B0_09 (pin F14) */
|
||
|
|
GPIO_PinInit(GPIO1, 9U, &USER_LED_config);
|
||
|
|
|
||
|
|
/* GPIO configuration of USER_BUTTON on WAKEUP (pin L6) */
|
||
|
|
gpio_pin_config_t USER_BUTTON_config = {
|
||
|
|
.direction = kGPIO_DigitalInput,
|
||
|
|
.outputLogic = 0U,
|
||
|
|
.interruptMode = kGPIO_NoIntmode
|
||
|
|
};
|
||
|
|
/* Initialize GPIO functionality on WAKEUP (pin L6) */
|
||
|
|
GPIO_PinInit(GPIO5, 0U, &USER_BUTTON_config);
|
||
|
|
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, 0U);
|
||
|
|
IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 &
|
||
|
|
(~(BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK)))
|
||
|
|
| IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL(0x00U)
|
||
|
|
);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_SNVS_WAKEUP_GPIO5_IO00, 0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, 0x50A0U);
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/*
|
||
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||
|
|
BOARD_InitDEBUG_UARTPins:
|
||
|
|
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
|
||
|
|
- pin_list:
|
||
|
|
- {pin_num: K14, peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_12, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
|
||
|
|
pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
|
||
|
|
- {pin_num: L14, peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_13, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
|
||
|
|
pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
|
||
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* FUNCTION ************************************************************************************************************
|
||
|
|
*
|
||
|
|
* Function Name : BOARD_InitDEBUG_UARTPins
|
||
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
||
|
|
*
|
||
|
|
* END ****************************************************************************************************************/
|
||
|
|
void BOARD_InitDEBUG_UARTPins(void) {
|
||
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||
|
|
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0x10B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0x10B0U);
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/*
|
||
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||
|
|
BOARD_InitSDRAMPins:
|
||
|
|
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||
|
|
- pin_list:
|
||
|
|
- {pin_num: C2, peripheral: SEMC, signal: 'ADDR, 00', pin_signal: GPIO_EMC_09}
|
||
|
|
- {pin_num: G1, peripheral: SEMC, signal: 'ADDR, 01', pin_signal: GPIO_EMC_10}
|
||
|
|
- {pin_num: G3, peripheral: SEMC, signal: 'ADDR, 02', pin_signal: GPIO_EMC_11}
|
||
|
|
- {pin_num: H1, peripheral: SEMC, signal: 'ADDR, 03', pin_signal: GPIO_EMC_12}
|
||
|
|
- {pin_num: A6, peripheral: SEMC, signal: 'ADDR, 04', pin_signal: GPIO_EMC_13}
|
||
|
|
- {pin_num: B6, peripheral: SEMC, signal: 'ADDR, 05', pin_signal: GPIO_EMC_14}
|
||
|
|
- {pin_num: B1, peripheral: SEMC, signal: 'ADDR, 06', pin_signal: GPIO_EMC_15}
|
||
|
|
- {pin_num: A5, peripheral: SEMC, signal: 'ADDR, 07', pin_signal: GPIO_EMC_16}
|
||
|
|
- {pin_num: A4, peripheral: SEMC, signal: 'ADDR, 08', pin_signal: GPIO_EMC_17}
|
||
|
|
- {pin_num: B2, peripheral: SEMC, signal: 'ADDR, 09', pin_signal: GPIO_EMC_18}
|
||
|
|
- {pin_num: G2, peripheral: SEMC, signal: 'ADDR, 10', pin_signal: GPIO_EMC_23}
|
||
|
|
- {pin_num: B4, peripheral: SEMC, signal: 'ADDR, 11', pin_signal: GPIO_EMC_19}
|
||
|
|
- {pin_num: A3, peripheral: SEMC, signal: 'ADDR, 12', pin_signal: GPIO_EMC_20}
|
||
|
|
- {pin_num: C1, peripheral: SEMC, signal: 'BA, 0', pin_signal: GPIO_EMC_21}
|
||
|
|
- {pin_num: F1, peripheral: SEMC, signal: 'BA, 1', pin_signal: GPIO_EMC_22}
|
||
|
|
- {pin_num: D3, peripheral: SEMC, signal: semc_cas, pin_signal: GPIO_EMC_24}
|
||
|
|
- {pin_num: A2, peripheral: SEMC, signal: semc_cke, pin_signal: GPIO_EMC_27}
|
||
|
|
- {pin_num: B3, peripheral: SEMC, signal: semc_clk, pin_signal: GPIO_EMC_26}
|
||
|
|
- {pin_num: E3, peripheral: SEMC, signal: 'DATA, 00', pin_signal: GPIO_EMC_00}
|
||
|
|
- {pin_num: F3, peripheral: SEMC, signal: 'DATA, 01', pin_signal: GPIO_EMC_01}
|
||
|
|
- {pin_num: F4, peripheral: SEMC, signal: 'DATA, 02', pin_signal: GPIO_EMC_02}
|
||
|
|
- {pin_num: G4, peripheral: SEMC, signal: 'DATA, 03', pin_signal: GPIO_EMC_03}
|
||
|
|
- {pin_num: F2, peripheral: SEMC, signal: 'DATA, 04', pin_signal: GPIO_EMC_04}
|
||
|
|
- {pin_num: G5, peripheral: SEMC, signal: 'DATA, 05', pin_signal: GPIO_EMC_05}
|
||
|
|
- {pin_num: H5, peripheral: SEMC, signal: 'DATA, 06', pin_signal: GPIO_EMC_06}
|
||
|
|
- {pin_num: H4, peripheral: SEMC, signal: 'DATA, 07', pin_signal: GPIO_EMC_07}
|
||
|
|
- {pin_num: C6, peripheral: SEMC, signal: 'DATA, 08', pin_signal: GPIO_EMC_30}
|
||
|
|
- {pin_num: C5, peripheral: SEMC, signal: 'DATA, 09', pin_signal: GPIO_EMC_31}
|
||
|
|
- {pin_num: D5, peripheral: SEMC, signal: 'DATA, 10', pin_signal: GPIO_EMC_32}
|
||
|
|
- {pin_num: C4, peripheral: SEMC, signal: 'DATA, 11', pin_signal: GPIO_EMC_33}
|
||
|
|
- {pin_num: D4, peripheral: SEMC, signal: 'DATA, 12', pin_signal: GPIO_EMC_34}
|
||
|
|
- {pin_num: E5, peripheral: SEMC, signal: 'DATA, 13', pin_signal: GPIO_EMC_35}
|
||
|
|
- {pin_num: C3, peripheral: SEMC, signal: 'DATA, 14', pin_signal: GPIO_EMC_36}
|
||
|
|
- {pin_num: E4, peripheral: SEMC, signal: 'DATA, 15', pin_signal: GPIO_EMC_37}
|
||
|
|
- {pin_num: H3, peripheral: SEMC, signal: 'DM, 0', pin_signal: GPIO_EMC_08}
|
||
|
|
- {pin_num: D6, peripheral: SEMC, signal: 'DM, 1', pin_signal: GPIO_EMC_38}
|
||
|
|
- {pin_num: D2, peripheral: SEMC, signal: semc_ras, pin_signal: GPIO_EMC_25}
|
||
|
|
- {pin_num: D1, peripheral: SEMC, signal: semc_we, pin_signal: GPIO_EMC_28}
|
||
|
|
- {pin_num: E1, peripheral: SEMC, signal: 'CS, 0', pin_signal: GPIO_EMC_29}
|
||
|
|
- {pin_num: B7, peripheral: SEMC, signal: semc_dqs, pin_signal: GPIO_EMC_39}
|
||
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* FUNCTION ************************************************************************************************************
|
||
|
|
*
|
||
|
|
* Function Name : BOARD_InitSDRAMPins
|
||
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
||
|
|
*
|
||
|
|
* END ****************************************************************************************************************/
|
||
|
|
void BOARD_InitSDRAMPins(void) {
|
||
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||
|
|
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_00_SEMC_DATA00, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_01_SEMC_DATA01, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_02_SEMC_DATA02, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_03_SEMC_DATA03, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_04_SEMC_DATA04, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_05_SEMC_DATA05, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_06_SEMC_DATA06, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_07_SEMC_DATA07, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_08_SEMC_DM00, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_09_SEMC_ADDR00, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_10_SEMC_ADDR01, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_11_SEMC_ADDR02, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_12_SEMC_ADDR03, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_13_SEMC_ADDR04, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_14_SEMC_ADDR05, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_15_SEMC_ADDR06, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_16_SEMC_ADDR07, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_17_SEMC_ADDR08, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_18_SEMC_ADDR09, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_19_SEMC_ADDR11, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_20_SEMC_ADDR12, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_21_SEMC_BA0, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_22_SEMC_BA1, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_23_SEMC_ADDR10, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_24_SEMC_CAS, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_25_SEMC_RAS, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_26_SEMC_CLK, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_27_SEMC_CKE, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_28_SEMC_WE, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_29_SEMC_CS0, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_30_SEMC_DATA08, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_31_SEMC_DATA09, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_32_SEMC_DATA10, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_33_SEMC_DATA11, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_34_SEMC_DATA12, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_35_SEMC_DATA13, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_36_SEMC_DATA14, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_37_SEMC_DATA15, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_38_SEMC_DM01, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_39_SEMC_DQS, 0U);
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/*
|
||
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||
|
|
BOARD_InitCSIPins:
|
||
|
|
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||
|
|
- pin_list:
|
||
|
|
- {pin_num: H13, peripheral: CSI, signal: 'csi_data, 09', pin_signal: GPIO_AD_B1_08}
|
||
|
|
- {pin_num: M13, peripheral: CSI, signal: 'csi_data, 08', pin_signal: GPIO_AD_B1_09}
|
||
|
|
- {pin_num: L13, peripheral: CSI, signal: 'csi_data, 07', pin_signal: GPIO_AD_B1_10}
|
||
|
|
- {pin_num: J13, peripheral: CSI, signal: 'csi_data, 06', pin_signal: GPIO_AD_B1_11}
|
||
|
|
- {pin_num: H12, peripheral: CSI, signal: 'csi_data, 05', pin_signal: GPIO_AD_B1_12}
|
||
|
|
- {pin_num: H11, peripheral: CSI, signal: 'csi_data, 04', pin_signal: GPIO_AD_B1_13}
|
||
|
|
- {pin_num: J14, peripheral: CSI, signal: 'csi_data, 02', pin_signal: GPIO_AD_B1_15}
|
||
|
|
- {pin_num: G12, peripheral: CSI, signal: 'csi_data, 03', pin_signal: GPIO_AD_B1_14}
|
||
|
|
- {pin_num: L12, peripheral: CSI, signal: csi_pixclk, pin_signal: GPIO_AD_B1_04}
|
||
|
|
- {pin_num: K12, peripheral: CSI, signal: csi_mclk, pin_signal: GPIO_AD_B1_05}
|
||
|
|
- {pin_num: J12, peripheral: CSI, signal: csi_vsync, pin_signal: GPIO_AD_B1_06}
|
||
|
|
- {pin_num: K10, peripheral: CSI, signal: csi_hsync, pin_signal: GPIO_AD_B1_07}
|
||
|
|
- {pin_num: J11, peripheral: LPI2C1, signal: SCL, pin_signal: GPIO_AD_B1_00, identifier: CSI_I2C_SCL, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm,
|
||
|
|
pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
|
||
|
|
- {pin_num: K11, peripheral: LPI2C1, signal: SDA, pin_signal: GPIO_AD_B1_01, identifier: CSI_I2C_SDA, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm,
|
||
|
|
pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
|
||
|
|
- {pin_num: F11, peripheral: GPIO1, signal: 'gpio_io, 04', pin_signal: GPIO_AD_B0_04}
|
||
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* FUNCTION ************************************************************************************************************
|
||
|
|
*
|
||
|
|
* Function Name : BOARD_InitCSIPins
|
||
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
||
|
|
*
|
||
|
|
* END ****************************************************************************************************************/
|
||
|
|
void BOARD_InitCSIPins(void) {
|
||
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||
|
|
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_04_GPIO1_IO04, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_04_CSI_PIXCLK, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_05_CSI_MCLK, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_06_CSI_VSYNC, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_07_CSI_HSYNC, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_08_CSI_DATA09, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_09_CSI_DATA08, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_10_CSI_DATA07, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_11_CSI_DATA06, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_12_CSI_DATA05, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_13_CSI_DATA04, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_14_CSI_DATA03, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_15_CSI_DATA02, 0U);
|
||
|
|
IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 &
|
||
|
|
(~(BOARD_INITCSIPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK)))
|
||
|
|
| IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL(0x00U)
|
||
|
|
);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, 0xD8B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, 0xD8B0U);
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/*
|
||
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||
|
|
BOARD_InitLCDPins:
|
||
|
|
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||
|
|
- pin_list:
|
||
|
|
- {pin_num: C8, peripheral: LCDIF, signal: 'lcdif_data, 00', pin_signal: GPIO_B0_04, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||
|
|
- {pin_num: B8, peripheral: LCDIF, signal: 'lcdif_data, 01', pin_signal: GPIO_B0_05, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||
|
|
- {pin_num: A8, peripheral: LCDIF, signal: 'lcdif_data, 02', pin_signal: GPIO_B0_06, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||
|
|
- {pin_num: D7, peripheral: LCDIF, signal: lcdif_clk, pin_signal: GPIO_B0_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||
|
|
- {pin_num: A9, peripheral: LCDIF, signal: 'lcdif_data, 03', pin_signal: GPIO_B0_07, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||
|
|
- {pin_num: B9, peripheral: LCDIF, signal: 'lcdif_data, 04', pin_signal: GPIO_B0_08, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||
|
|
- {pin_num: C9, peripheral: LCDIF, signal: 'lcdif_data, 05', pin_signal: GPIO_B0_09, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||
|
|
- {pin_num: D9, peripheral: LCDIF, signal: 'lcdif_data, 06', pin_signal: GPIO_B0_10, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||
|
|
- {pin_num: A10, peripheral: LCDIF, signal: 'lcdif_data, 07', pin_signal: GPIO_B0_11, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||
|
|
- {pin_num: C10, peripheral: LCDIF, signal: 'lcdif_data, 08', pin_signal: GPIO_B0_12, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||
|
|
- {pin_num: D10, peripheral: LCDIF, signal: 'lcdif_data, 09', pin_signal: GPIO_B0_13, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||
|
|
- {pin_num: E10, peripheral: LCDIF, signal: 'lcdif_data, 10', pin_signal: GPIO_B0_14, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||
|
|
- {pin_num: E11, peripheral: LCDIF, signal: 'lcdif_data, 11', pin_signal: GPIO_B0_15, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||
|
|
- {pin_num: A11, peripheral: LCDIF, signal: 'lcdif_data, 12', pin_signal: GPIO_B1_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||
|
|
- {pin_num: B11, peripheral: LCDIF, signal: 'lcdif_data, 13', pin_signal: GPIO_B1_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||
|
|
- {pin_num: C11, peripheral: LCDIF, signal: 'lcdif_data, 14', pin_signal: GPIO_B1_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||
|
|
- {pin_num: D11, peripheral: LCDIF, signal: 'lcdif_data, 15', pin_signal: GPIO_B1_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||
|
|
- {pin_num: E7, peripheral: LCDIF, signal: lcdif_enable, pin_signal: GPIO_B0_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||
|
|
- {pin_num: E8, peripheral: LCDIF, signal: lcdif_hsync, pin_signal: GPIO_B0_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||
|
|
- {pin_num: D8, peripheral: LCDIF, signal: lcdif_vsync, pin_signal: GPIO_B0_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||
|
|
- {pin_num: B14, peripheral: GPIO2, signal: 'gpio_io, 31', pin_signal: GPIO_B1_15, slew_rate: Slow}
|
||
|
|
- {pin_num: M11, peripheral: GPIO1, signal: 'gpio_io, 02', pin_signal: GPIO_AD_B0_02}
|
||
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* FUNCTION ************************************************************************************************************
|
||
|
|
*
|
||
|
|
* Function Name : BOARD_InitLCDPins
|
||
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
||
|
|
*
|
||
|
|
* END ****************************************************************************************************************/
|
||
|
|
void BOARD_InitLCDPins(void) {
|
||
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||
|
|
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_02_GPIO1_IO02, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_00_LCD_CLK, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_04_LCD_DATA00, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_05_LCD_DATA01, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_06_LCD_DATA02, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_07_LCD_DATA03, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_08_LCD_DATA04, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_09_LCD_DATA05, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_10_LCD_DATA06, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_11_LCD_DATA07, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_12_LCD_DATA08, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_13_LCD_DATA09, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_14_LCD_DATA10, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_15_LCD_DATA11, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_00_LCD_DATA12, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_01_LCD_DATA13, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_02_LCD_DATA14, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_03_LCD_DATA15, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_15_GPIO2_IO31, 0U);
|
||
|
|
IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 &
|
||
|
|
(~(BOARD_INITLCDPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK)))
|
||
|
|
| IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL(0x00U)
|
||
|
|
);
|
||
|
|
IOMUXC_GPR->GPR27 = ((IOMUXC_GPR->GPR27 &
|
||
|
|
(~(BOARD_INITLCDPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK)))
|
||
|
|
| IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL(0x00U)
|
||
|
|
);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_00_LCD_CLK, 0x01B0B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0x01B0B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0x01B0B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0x01B0B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_04_LCD_DATA00, 0x01B0B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_05_LCD_DATA01, 0x01B0B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_06_LCD_DATA02, 0x01B0B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_07_LCD_DATA03, 0x01B0B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_08_LCD_DATA04, 0x01B0B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_09_LCD_DATA05, 0x01B0B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_10_LCD_DATA06, 0x01B0B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_11_LCD_DATA07, 0x01B0B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_12_LCD_DATA08, 0x01B0B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_13_LCD_DATA09, 0x01B0B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_14_LCD_DATA10, 0x01B0B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_15_LCD_DATA11, 0x01B0B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_00_LCD_DATA12, 0x01B0B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_01_LCD_DATA13, 0x01B0B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_02_LCD_DATA14, 0x01B0B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_03_LCD_DATA15, 0x01B0B0U);
|
||
|
|
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_15_GPIO2_IO31, 0x10B0U);
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/*
|
||
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||
|
|
BOARD_InitCANPins:
|
||
|
|
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||
|
|
- pin_list:
|
||
|
|
- {pin_num: H14, peripheral: CAN2, signal: TX, pin_signal: GPIO_AD_B0_14}
|
||
|
|
- {pin_num: L10, peripheral: CAN2, signal: RX, pin_signal: GPIO_AD_B0_15}
|
||
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* FUNCTION ************************************************************************************************************
|
||
|
|
*
|
||
|
|
* Function Name : BOARD_InitCANPins
|
||
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
||
|
|
*
|
||
|
|
* END ****************************************************************************************************************/
|
||
|
|
void BOARD_InitCANPins(void) {
|
||
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||
|
|
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_14_FLEXCAN2_TX, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_15_FLEXCAN2_RX, 0U);
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/*
|
||
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||
|
|
BOARD_InitENETPins:
|
||
|
|
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||
|
|
- pin_list:
|
||
|
|
- {pin_num: A7, peripheral: ENET, signal: enet_mdc, pin_signal: GPIO_EMC_40}
|
||
|
|
- {pin_num: C7, peripheral: ENET, signal: enet_mdio, pin_signal: GPIO_EMC_41}
|
||
|
|
- {pin_num: B13, peripheral: ENET, signal: enet_ref_clk, pin_signal: GPIO_B1_10}
|
||
|
|
- {pin_num: E12, peripheral: ENET, signal: 'enet_rx_data, 0', pin_signal: GPIO_B1_04}
|
||
|
|
- {pin_num: D12, peripheral: ENET, signal: 'enet_rx_data, 1', pin_signal: GPIO_B1_05}
|
||
|
|
- {pin_num: C12, peripheral: ENET, signal: enet_rx_en, pin_signal: GPIO_B1_06}
|
||
|
|
- {pin_num: C13, peripheral: ENET, signal: enet_rx_er, pin_signal: GPIO_B1_11}
|
||
|
|
- {pin_num: B12, peripheral: ENET, signal: 'enet_tx_data, 0', pin_signal: GPIO_B1_07}
|
||
|
|
- {pin_num: A12, peripheral: ENET, signal: 'enet_tx_data, 1', pin_signal: GPIO_B1_08}
|
||
|
|
- {pin_num: A13, peripheral: ENET, signal: enet_tx_en, pin_signal: GPIO_B1_09}
|
||
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* FUNCTION ************************************************************************************************************
|
||
|
|
*
|
||
|
|
* Function Name : BOARD_InitENETPins
|
||
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
||
|
|
*
|
||
|
|
* END ****************************************************************************************************************/
|
||
|
|
void BOARD_InitENETPins(void) {
|
||
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||
|
|
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_04_ENET_RX_DATA00, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_05_ENET_RX_DATA01, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_06_ENET_RX_EN, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_07_ENET_TX_DATA00, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_08_ENET_TX_DATA01, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_09_ENET_TX_EN, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_10_ENET_REF_CLK, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_11_ENET_RX_ER, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_40_ENET_MDC, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_41_ENET_MDIO, 0U);
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/*
|
||
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||
|
|
BOARD_InitUSDHCPins:
|
||
|
|
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||
|
|
- pin_list:
|
||
|
|
- {pin_num: J2, peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_05}
|
||
|
|
- {pin_num: H2, peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_04}
|
||
|
|
- {pin_num: K1, peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_03}
|
||
|
|
- {pin_num: J1, peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_02}
|
||
|
|
- {pin_num: J4, peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_00}
|
||
|
|
- {pin_num: J3, peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_01}
|
||
|
|
- {pin_num: C14, peripheral: USDHC1, signal: usdhc_vselect, pin_signal: GPIO_B1_14}
|
||
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* FUNCTION ************************************************************************************************************
|
||
|
|
*
|
||
|
|
* Function Name : BOARD_InitUSDHCPins
|
||
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
||
|
|
*
|
||
|
|
* END ****************************************************************************************************************/
|
||
|
|
void BOARD_InitUSDHCPins(void) {
|
||
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||
|
|
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_14_USDHC1_VSELECT, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_00_USDHC1_CMD, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_01_USDHC1_CLK, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3, 0U);
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/*
|
||
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||
|
|
BOARD_InitQSPIPins:
|
||
|
|
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||
|
|
- pin_list:
|
||
|
|
- {pin_num: P3, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08}
|
||
|
|
- {pin_num: N4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_09}
|
||
|
|
- {pin_num: P4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_10}
|
||
|
|
- {pin_num: P5, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_11}
|
||
|
|
- {pin_num: L4, peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07}
|
||
|
|
- {pin_num: L3, peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_06}
|
||
|
|
- {pin_num: N3, peripheral: FLEXSPI, signal: FLEXSPI_A_DQS, pin_signal: GPIO_SD_B1_05}
|
||
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* FUNCTION ************************************************************************************************************
|
||
|
|
*
|
||
|
|
* Function Name : BOARD_InitQSPIPins
|
||
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
||
|
|
*
|
||
|
|
* END ****************************************************************************************************************/
|
||
|
|
void BOARD_InitQSPIPins(void) {
|
||
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||
|
|
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_05_FLEXSPIA_DQS, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPIA_SS0_B, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPIA_SCLK, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPIA_DATA00, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPIA_DATA01, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPIA_DATA02, 0U);
|
||
|
|
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPIA_DATA03, 0U);
|
||
|
|
}
|
||
|
|
|
||
|
|
/***********************************************************************************************************************
|
||
|
|
* EOF
|
||
|
|
**********************************************************************************************************************/
|