andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
Files
f392b4c91d725a02010cea46f94af3cb948b5136
tinyUSB/hw/bsp/mcx/boards/frdm_mcxa156/pin_mux.c

145 lines
7.7 KiB
C
Raw Normal View History

Added initial support for FRDM-MCXA156 and fixed up a crash with MCXN947 I will be porting tinyuf2 to MCXA156 and N947 and need this work in place. This is the 1st step before bringing in support for other MCX devices. We had previous patched https://github.com/hathach/mcux-sdk.git' for MCX support as it was not pulically available I updated get_deps to point to the mcux-sdk version 2.16.10 from NXP. I repointed the entry in the get_deps script to use NXP MCU repo. The existing current code couldn't build as the MCUXpresso SDK was old. - For now, I put a copy of fsl_spc.c in the drivers folder for the mcx family. None of the ports could build with the version in the mcux github sdk. The sdk on github has version 2.4.0. The SDK package that can be downloaded with the SDK generator uses 2.4.2. All of the clock_config routines use versions of the datastructure from 2.4.2. For now, keeping an updated copy in hw/bsp/mcx/drivers so we can build against the latest mcuxpresso sdk and enable MCXA156. I'll file an issue on the nxp github. - Cleaned up the MCX family.c a little bit. the MCXA/N these chips don't have SCT so I removed the neopixel code. - fixed a clock init issue w/ N947 that was causing it to crash when initializing the uart. - I tested the cmake and make scripts on the A153,A156 and N947 using the CDC/MSC sample. All worked OK. - Patched get_deps so it will do a fetch/check on a new folder. Some of the deps were failing on a fresh clone of tinyusb - Fixed lpc51,54 and lpc55 make/cmake files to build with mcuxpresso sdk 2.16.10 The folder structure for flexcomm/uart changed a little bit - lpc55s59 libpower_hardabi.a no longer is included in mcuxpressosdk, (fsl_power.c is replacement). remove of libpower_hardabi.a from the linker config. LPC55 still works as expected. - Using tinyuf2 get deps
2025-01-01 13:22:48 -05:00
/*
* Copyright 2024 NXP
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/***********************************************************************************************************************
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
**********************************************************************************************************************/
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!GlobalInfo
product: Pins v15.0
processor: MCXA156
package_id: MCXA156VLL
mcu_data: ksdk2_0
processor_version: 0.15.0
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
#include "fsl_common.h"
#include "fsl_port.h"
#include "pin_mux.h"
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitBootPins
* Description : Calls initialization functions.
*
* END ****************************************************************************************************************/
void BOARD_InitBootPins(void)
{
BOARD_InitPins();
}
/* clang-format off */
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitPins:
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
- pin_list:
- {pin_num: '78', peripheral: LPUART0, signal: RX, pin_signal: P0_2/TDO/SWO/LPUART0_RXD/LPSPI0_SCK/CT0_MAT0/UTICK_CAP0/FLEXIO0_D2, slew_rate: fast, open_drain: disable,
drive_strength: low, pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal}
- {pin_num: '79', peripheral: LPUART0, signal: TX, pin_signal: P0_3/TDI/LPUART0_TXD/LPSPI0_SDO/CT0_MAT1/UTICK_CAP1/FLEXIO0_D3/CMP0_OUT, slew_rate: fast, open_drain: disable,
drive_strength: low, pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* clang-format on */
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitPins
* Description : Configures pin routing and optionally pin electrical features.
*
* END ****************************************************************************************************************/
void BOARD_InitPins(void)
{
RESET_PeripheralReset(kLPUART0_RST_SHIFT_RSTn);
CLOCK_SetClockDiv(kCLOCK_DivLPUART0, 1u);
CLOCK_AttachClk(kFRO12M_to_LPUART0);
/* GPIO3: Peripheral clock is enabled */
CLOCK_EnableClock(kCLOCK_GateGPIO3);
/* PORT3: Peripheral clock is enabled */
CLOCK_EnableClock(kCLOCK_GatePORT3);
/* GPIO3 peripheral is released from reset */
RESET_ReleasePeripheralReset(kGPIO3_RST_SHIFT_RSTn);
/* PORT3 peripheral is released from reset */
RESET_ReleasePeripheralReset(kPORT3_RST_SHIFT_RSTn);
/* GPIO3: Peripheral clock is enabled */
CLOCK_EnableClock(kCLOCK_GateGPIO0);
/* PORT3: Peripheral clock is enabled */
CLOCK_EnableClock(kCLOCK_GatePORT0);
/* GPIO3 peripheral is released from reset */
RESET_ReleasePeripheralReset(kGPIO0_RST_SHIFT_RSTn);
/* PORT3 peripheral is released from reset */
RESET_ReleasePeripheralReset(kPORT0_RST_SHIFT_RSTn);
/* PORT0: Peripheral clock is enabled */
CLOCK_EnableClock(kCLOCK_GatePORT0);
/* LPUART0 peripheral is released from reset */
RESET_ReleasePeripheralReset(kLPUART0_RST_SHIFT_RSTn);
/* PORT0 peripheral is released from reset */
RESET_ReleasePeripheralReset(kPORT0_RST_SHIFT_RSTn);
const port_pin_config_t port0_2_pin78_config = {/* Internal pull-up resistor is enabled */
kPORT_PullUp,
/* Low internal pull resistor value is selected. */
kPORT_LowPullResistor,
/* Fast slew rate is configured */
kPORT_FastSlewRate,
/* Passive input filter is disabled */
kPORT_PassiveFilterDisable,
/* Open drain output is disabled */
kPORT_OpenDrainDisable,
/* Low drive strength is configured */
kPORT_LowDriveStrength,
/* Normal drive strength is configured */
kPORT_NormalDriveStrength,
/* Pin is configured as LPUART0_RXD */
kPORT_MuxAlt2,
/* Digital input enabled */
kPORT_InputBufferEnable,
/* Digital input is not inverted */
kPORT_InputNormal,
/* Pin Control Register fields [15:0] are not locked */
kPORT_UnlockRegister};
/* PORT0_2 (pin 78) is configured as LPUART0_RXD */
PORT_SetPinConfig(PORT0, 2U, &port0_2_pin78_config);
const port_pin_config_t port0_3_pin79_config = {/* Internal pull-up resistor is enabled */
kPORT_PullUp,
/* Low internal pull resistor value is selected. */
kPORT_LowPullResistor,
/* Fast slew rate is configured */
kPORT_FastSlewRate,
/* Passive input filter is disabled */
kPORT_PassiveFilterDisable,
/* Open drain output is disabled */
kPORT_OpenDrainDisable,
/* Low drive strength is configured */
kPORT_LowDriveStrength,
/* Normal drive strength is configured */
kPORT_NormalDriveStrength,
/* Pin is configured as LPUART0_TXD */
kPORT_MuxAlt2,
/* Digital input enabled */
kPORT_InputBufferEnable,
/* Digital input is not inverted */
kPORT_InputNormal,
/* Pin Control Register fields [15:0] are not locked */
kPORT_UnlockRegister};
/* PORT0_3 (pin 79) is configured as LPUART0_TXD */
PORT_SetPinConfig(PORT0, 3U, &port0_3_pin79_config);
}
/***********************************************************************************************************************
* EOF
**********************************************************************************************************************/
Reference in New Issue Copy Permalink