tinyUSB/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.h

#ifndef _NUCLEI_SDK_HAL_H
#define _NUCLEI_SDK_HAL_H

#include "gd32vf103c_longan_nano.h"

// 4 bits for interrupt level, 0 for priority.
// level 0 = lowest priority, level 15 = highest priority.
#define __ECLIC_INTCTLBITS  4

#define __SYSTEM_CLOCK      72000000
#define HXTAL_VALUE         ((uint32_t)8000000)

#define SOC_DEBUG_UART      GD32_COM0

#define DBG_KEY_UNLOCK      0x4B5A6978
#define DBG_CMD_RESET       0x1
#define DBG_KEY             REG32(DBG + 0x0C)
#define DBG_CMD             REG32(DBG + 0x08)

#endif
Add board support for gd32vf103 longan nano 2021-07-10 11:17:24 +02:00			`#ifndef _NUCLEI_SDK_HAL_H`
			`#define _NUCLEI_SDK_HAL_H`

Use nuclei-sdk functions for init code Instead of using the HAL functions we can just use the defines from the board support for the longan nano that comes with the nuclei-sdk. Also we move some includes and defines to the header file. 2021-08-07 10:08:42 +02:00			`#include "gd32vf103c_longan_nano.h"`
Add board support for gd32vf103 longan nano 2021-07-10 11:17:24 +02:00
Use nuclei-sdk functions for init code Instead of using the HAL functions we can just use the defines from the board support for the longan nano that comes with the nuclei-sdk. Also we move some includes and defines to the header file. 2021-08-07 10:08:42 +02:00			`// 4 bits for interrupt level, 0 for priority.`
			`// level 0 = lowest priority, level 15 = highest priority.`
Remove unsuitable clock configurations from init code Only 48MHz, 72MHz, 96MHz and 120 MHz system clocks derived from an external crystal are suitable for the usb peripheral, as the internal oscillator is not stable enough. Also the usb-prescaler only supports division by 1 (48MHZ), 1.5(72MHz), 2(96MHz) and 2.5(120Mhz). 120Mhz is also out of spec and not added here. 2021-08-07 11:03:16 +02:00			`#define __ECLIC_INTCTLBITS 4`
Add board support for gd32vf103 longan nano 2021-07-10 11:17:24 +02:00
Remove unsuitable clock configurations from init code Only 48MHz, 72MHz, 96MHz and 120 MHz system clocks derived from an external crystal are suitable for the usb peripheral, as the internal oscillator is not stable enough. Also the usb-prescaler only supports division by 1 (48MHZ), 1.5(72MHz), 2(96MHz) and 2.5(120Mhz). 120Mhz is also out of spec and not added here. 2021-08-07 11:03:16 +02:00			`#define __SYSTEM_CLOCK 72000000`
			`#define HXTAL_VALUE ((uint32_t)8000000)`
Use nuclei-sdk functions for init code Instead of using the HAL functions we can just use the defines from the board support for the longan nano that comes with the nuclei-sdk. Also we move some includes and defines to the header file. 2021-08-07 10:08:42 +02:00
Remove unsuitable clock configurations from init code Only 48MHz, 72MHz, 96MHz and 120 MHz system clocks derived from an external crystal are suitable for the usb peripheral, as the internal oscillator is not stable enough. Also the usb-prescaler only supports division by 1 (48MHZ), 1.5(72MHz), 2(96MHz) and 2.5(120Mhz). 120Mhz is also out of spec and not added here. 2021-08-07 11:03:16 +02:00			`#define SOC_DEBUG_UART GD32_COM0`

			`#define DBG_KEY_UNLOCK 0x4B5A6978`
			`#define DBG_CMD_RESET 0x1`
			`#define DBG_KEY REG32(DBG + 0x0C)`
			`#define DBG_CMD REG32(DBG + 0x08)`
Add board support for gd32vf103 longan nano 2021-07-10 11:17:24 +02:00
			`#endif`