Merge pull request #2672 from tinic/master
Add support for STM32U535xx/STM32U545xx
This commit is contained in:
Ha Thach
8
hw/bsp/stm32u5/boards/stm32u545nucleo/board.cmake
Normal file
8
hw/bsp/stm32u5/boards/stm32u545nucleo/board.cmake
Normal file
@@ -0,0 +1,8 @@
|
||||
set(MCU_VARIANT stm32u545xx)
|
||||
set(JLINK_DEVICE stm32u545re)
|
||||
|
||||
function(update_board TARGET)
|
||||
target_compile_definitions(${TARGET} PUBLIC
|
||||
STM32U545xx
|
||||
)
|
||||
endfunction()
|
||||
112
hw/bsp/stm32u5/boards/stm32u545nucleo/board.h
Normal file
112
hw/bsp/stm32u5/boards/stm32u545nucleo/board.h
Normal file
@@ -0,0 +1,112 @@
|
||||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2023, Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#ifndef BOARD_H_
|
||||
#define BOARD_H_
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C"
|
||||
{
|
||||
#endif
|
||||
|
||||
// LED GREEN
|
||||
#define LED_PORT GPIOA
|
||||
#define LED_PIN GPIO_PIN_5
|
||||
#define LED_STATE_ON 1
|
||||
|
||||
// BUTTON
|
||||
#define BUTTON_PORT GPIOC
|
||||
#define BUTTON_PIN GPIO_PIN_13
|
||||
#define BUTTON_STATE_ACTIVE 1
|
||||
|
||||
// UART Enable for STLink VCOM
|
||||
#define UART_DEV LPUART1
|
||||
#define UART_CLK_EN __HAL_RCC_LPUART1_CLK_ENABLE
|
||||
#define UART_GPIO_PORT GPIOA
|
||||
#define UART_GPIO_AF GPIO_AF8_LPUART1
|
||||
#define UART_TX_PIN GPIO_PIN_2
|
||||
#define UART_RX_PIN GPIO_PIN_3
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// RCC Clock
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
static void SystemClock_Config(void) {
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = { 0 };
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 };
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInit = { 0 };
|
||||
|
||||
/* Enable Power Clock */
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
/** Configure the main internal regulator output voltage
|
||||
*/
|
||||
HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||
|
||||
/** Initializes the CPU, AHB and APB buses clocks
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSI;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
|
||||
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
|
||||
RCC_OscInitStruct.PLL.PLLMBOOST = RCC_PLLMBOOST_DIV1;
|
||||
RCC_OscInitStruct.PLL.PLLM = 1;
|
||||
RCC_OscInitStruct.PLL.PLLN = 10;
|
||||
RCC_OscInitStruct.PLL.PLLP = 2;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 2;
|
||||
RCC_OscInitStruct.PLL.PLLR = 1;
|
||||
RCC_OscInitStruct.PLL.PLLRGE = RCC_PLLVCIRANGE_1;
|
||||
RCC_OscInitStruct.PLL.PLLFRACN = 0;
|
||||
HAL_RCC_OscConfig(&RCC_OscInitStruct);
|
||||
|
||||
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_CLK48;
|
||||
PeriphClkInit.IclkClockSelection = RCC_CLK48CLKSOURCE_HSI48;
|
||||
|
||||
HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit);
|
||||
|
||||
/** Initializes the CPU, AHB and APB buses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType =
|
||||
RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_PCLK3;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB3CLKDivider = RCC_HCLK_DIV1;
|
||||
|
||||
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4);
|
||||
}
|
||||
|
||||
static void SystemPower_Config(void) {
|
||||
}
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* BOARD_H_ */
|
||||
11
hw/bsp/stm32u5/boards/stm32u545nucleo/board.mk
Normal file
11
hw/bsp/stm32u5/boards/stm32u545nucleo/board.mk
Normal file
@@ -0,0 +1,11 @@
|
||||
CFLAGS += \
|
||||
-DSTM32U545xx \
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = ${FAMILY_PATH}/linker/STM32U545xx_FLASH.ld
|
||||
|
||||
SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u545xx.s
|
||||
|
||||
MCU_VARIANT = stm32u545xx
|
||||
# For flash-jlink target
|
||||
JLINK_DEVICE = stm32u545re
|
||||
@@ -6,5 +6,6 @@ LD_FILE = ${FAMILY_PATH}/linker/STM32U575xx_FLASH.ld
|
||||
|
||||
SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u575xx.s
|
||||
|
||||
MCU_VARIANT = stm32u575xx
|
||||
# For flash-jlink target
|
||||
JLINK_DEVICE = stm32u575ai
|
||||
|
||||
@@ -6,5 +6,6 @@ LD_FILE = ${FAMILY_PATH}/linker/STM32U575xx_FLASH.ld
|
||||
|
||||
SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u575xx.s
|
||||
|
||||
MCU_VARIANT = stm32u575xx
|
||||
# For flash-jlink target
|
||||
JLINK_DEVICE = stm32u575zi
|
||||
|
||||
@@ -7,5 +7,6 @@ LD_FILE = ${BOARD_PATH}/STM32U5A5ZJTXQ_FLASH.ld
|
||||
|
||||
SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u5a5xx.s
|
||||
|
||||
MCU_VARIANT = stm32u5a5xx
|
||||
# For flash-jlink target
|
||||
JLINK_DEVICE = stm32u575zi
|
||||
|
||||
@@ -72,7 +72,9 @@ void board_init(void) {
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOE_CLK_ENABLE();
|
||||
#ifdef GPIOF
|
||||
__HAL_RCC_GPIOF_CLK_ENABLE();
|
||||
#endif
|
||||
__HAL_RCC_GPIOG_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOH_CLK_ENABLE();
|
||||
|
||||
@@ -140,6 +142,17 @@ void board_init(void) {
|
||||
GPIO_InitStruct.Alternate = GPIO_AF10_USB;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
#ifdef USB_DRD_FS
|
||||
// STM32U535/STM32U545
|
||||
|
||||
/* Enable USB power on Pwrctrl CR2 register */
|
||||
HAL_PWREx_EnableVddUSB();
|
||||
|
||||
/* USB clock enable */
|
||||
__HAL_RCC_USB_FS_CLK_ENABLE();
|
||||
|
||||
#endif
|
||||
|
||||
#ifdef USB_OTG_FS
|
||||
#if CFG_TUSB_OS == OPT_OS_FREERTOS
|
||||
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
|
||||
@@ -170,7 +183,9 @@ void board_init(void) {
|
||||
/* USB clock enable */
|
||||
__HAL_RCC_USB_OTG_FS_CLK_ENABLE();
|
||||
|
||||
#else
|
||||
#endif
|
||||
|
||||
#ifdef USB_OTG_HS
|
||||
// STM59x/Ax/Fx/Gx only have 1 USB HS port
|
||||
|
||||
#if CFG_TUSB_OS == OPT_OS_FREERTOS
|
||||
|
||||
@@ -102,10 +102,16 @@ function(family_configure_example TARGET RTOS)
|
||||
|
||||
# Add TinyUSB target and port source
|
||||
family_add_tinyusb(${TARGET} OPT_MCU_STM32U5 ${RTOS})
|
||||
target_sources(${TARGET}-tinyusb PUBLIC
|
||||
${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c
|
||||
#${TOP}/src/portable/st/typec/typec_stm32.c
|
||||
)
|
||||
if ((${MCU_VARIANT} STREQUAL "stm32u535xx") OR (${MCU_VARIANT} STREQUAL "stm32u545xx"))
|
||||
target_sources(${TARGET}-tinyusb PUBLIC
|
||||
${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
|
||||
)
|
||||
else ()
|
||||
target_sources(${TARGET}-tinyusb PUBLIC
|
||||
${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c
|
||||
#${TOP}/src/portable/st/typec/typec_stm32.c
|
||||
)
|
||||
endif ()
|
||||
target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
|
||||
|
||||
# Link dependencies
|
||||
|
||||
@@ -27,18 +27,28 @@ LDFLAGS_GCC += \
|
||||
--specs=nosys.specs --specs=nano.specs
|
||||
|
||||
SRC_C += \
|
||||
src/portable/synopsys/dwc2/dcd_dwc2.c \
|
||||
$(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_icache.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_icache.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \
|
||||
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c
|
||||
|
||||
ifeq ($(MCU_VARIANT),stm32u545xx)
|
||||
SRC_C += \
|
||||
src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
|
||||
else ifeq ($(MCU_VARIANT),stm32u535xx)
|
||||
SRC_C += \
|
||||
src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
|
||||
else
|
||||
SRC_C += \
|
||||
src/portable/synopsys/dwc2/dcd_dwc2.c
|
||||
endif
|
||||
|
||||
INC += \
|
||||
$(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
|
||||
$(TOP)/$(ST_CMSIS)/Include \
|
||||
|
||||
Reference in New Issue
Block a user