add iar support for lpc43, add lpcxpresso43s67 to hil farm

.github/workflows/build_iar.yml

@@ -32,7 +32,7 @@ jobs:
           # Alphabetical order
           # Note: bundle multiple families into a matrix since there is only one self-hosted instance can
           # run IAR build. Too many matrix can hurt due to setup/teardown overhead.
-          - 'stm32f0 stm32f1 stm32f4 stm32f7 stm32g0 stm32g4 stm32h7 stm32l4'
+          - 'lpc43 stm32f0 stm32f1 stm32f4 stm32f7 stm32g0 stm32g4 stm32h7 stm32l4'
     steps:
       - name: Clean workspace
         run: |
@@ -52,82 +52,3 @@ jobs:
       - name: Test on actual hardware (hardware in the loop)
         run: |
           python3 test/hil/hil_test.py hil_hfp.json
-
-#      # Upload binaries for hardware test with self-hosted
-#      - name: Prepare stm32l412nucleo Artifacts
-#        if: contains(matrix.family, 'stm32l4')
-#        working-directory: ${{github.workspace}}/cmake-build/cmake-build-stm32l412nucleo
-#        run: |
-#          find device/ -name "*.elf" -exec mv {} ../../ \;
-#
-#      - name: Upload Artifacts for stm32l412nucleo
-#        if: contains(matrix.family, 'stm32l4') && github.repository_owner == 'hathach'
-#        uses: actions/upload-artifact@v3
-#        with:
-#          name: stm32l4
-#          path: |
-#            *.elf
-
-  # ---------------------------------------
-  # Hardware in the loop (HIL)
-  # Current self-hosted instance is running on an EPYC 7232 server hosted by HiFiPhile user
-  # ---------------------------------------
-#  hw-stm32l412nucleo-test:
-#    needs: cmake
-#    runs-on: [self-hosted, Linux, X64, hifiphile]
-#
-#    steps:
-#      - name: Clean workspace
-#        run: |
-#          echo "Cleaning up previous run"
-#          rm -rf "${{ github.workspace }}"
-#          mkdir -p "${{ github.workspace }}"
-#
-#      - name: Download stm32l4 Artifacts
-#        uses: actions/download-artifact@v3
-#        with:
-#          name: stm32l4
-#
-#      - name: Create flash.sh
-#        run: |
-#          echo > flash.sh 'echo halt > flash.jlink'
-#          echo >> flash.sh 'echo r >> flash.jlink'
-#          echo >> flash.sh 'echo loadfile $1 >> flash.jlink'
-#          echo >> flash.sh 'echo r >> flash.jlink'
-#          echo >> flash.sh 'echo go >> flash.jlink'
-#          echo >> flash.sh 'echo exit >> flash.jlink'
-#          echo >> flash.sh 'cmdout=$(JLinkExe -USB 774470029 -device stm32l412kb -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile flash.jlink)'
-#          echo >> flash.sh 'if (( $? )) ; then echo $cmdout ; fi'
-#          chmod +x flash.sh
-#
-#      - name: Test cdc_dual_ports
-#        run: |
-#          ./flash.sh cdc_dual_ports.elf
-#          while (! ([ -e /dev/ttyACM1 ] && [ -e /dev/ttyACM2 ])) && [ $SECONDS -le 10 ]; do :; done
-#          test -e /dev/ttyACM1 && echo "ttyACM1 exists"
-#          test -e /dev/ttyACM2 && echo "ttyACM2 exists"
-#
-#        # Debian does not auto mount usb drive. skip this test for now
-#      - name: Test cdc_msc
-#        if: false
-#        run: |
-#          ./flash.sh cdc_msc.elf
-#          readme='/media/pi/TinyUSB MSC/README.TXT'
-#          while (! ([ -e /dev/ttyACM1 ] && [ -f "$readme" ])) && [ $SECONDS -le 10 ]; do :; done
-#          test -e /dev/ttyACM1 && echo "ttyACM1 exists"
-#          test -f "$readme" && echo "$readme exists"
-#          cat "$readme"
-#
-#      - name: Test dfu
-#        run: |
-#          ./flash.sh dfu.elf
-#          while (! (dfu-util -l | grep "Found DFU")) && [ $SECONDS -le 10 ]; do :; done
-#          dfu-util -d cafe -a 0 -U dfu0
-#          dfu-util -d cafe -a 1 -U dfu1
-#          grep "TinyUSB DFU! - Partition 0" dfu0
-#          grep "TinyUSB DFU! - Partition 1" dfu1
-#
-#      - name: Test dfu_runtime
-#        run: |
-#          ./flash.sh dfu_runtime.elf
-#          while (! (dfu-util -l | grep "Found Runtime")) && [ $SECONDS -le 10 ]; do :; done

examples/host/msc_file_explorer/CMakeLists.txt

@@ -22,11 +22,13 @@ target_sources(${PROJECT} PUBLIC
   )
 
 # Suppress warnings on fatfs
-set_source_files_properties(
+if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
-  ${TOP}/lib/fatfs/source/ff.c
+  set_source_files_properties(
-  PROPERTIES
+    ${TOP}/lib/fatfs/source/ff.c
-  COMPILE_FLAGS "-Wno-conversion -Wno-cast-qual"
+    PROPERTIES
-)
+    COMPILE_FLAGS "-Wno-conversion -Wno-cast-qual"
+    )
+endif ()
 
 # Example include
 target_include_directories(${PROJECT} PUBLIC

hw/bsp/lpc43/family.c

@@ -63,13 +63,25 @@ const uint32_t ExtRateIn = 0;
 void SystemInit(void)
 {
 #ifdef __USE_LPCOPEN
-	extern void (* const g_pfnVectors[])(void);
   unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08;
-	*pSCB_VTOR = (unsigned int) g_pfnVectors;
 
-  #if __FPU_USED == 1
+#ifdef __ICCARM__
+  extern void *__vector_table;
+  *pSCB_VTOR = (unsigned int) &__vector_table;
+
+#elif defined(__ARMCC_VERSION)
+  extern void *__Vectors;
+	*pSCB_VTOR = (unsigned int) &__Vectors;
+
+#else // other compoiler using cr_startup_lpc43xx.c
+	extern void (* const g_pfnVectors[])(void);
+	*pSCB_VTOR = (unsigned int) g_pfnVectors;
+#endif
+
+#if __FPU_USED == 1
 	fpuInit();
-  #endif
+#endif
+
 #endif
 
   /* Setup system level pin muxing */

hw/bsp/lpc43/family.cmake

@@ -17,43 +17,48 @@ set(FAMILY_MCUS LPC43XX CACHE INTERNAL "")
 #------------------------------------
 # only need to be built ONCE for all examples
 function(add_board_target BOARD_TARGET)
-  if (NOT TARGET ${BOARD_TARGET})
+  if (TARGET ${BOARD_TARGET})
-    add_library(${BOARD_TARGET} STATIC
+    return()
-      ${SDK_DIR}/../gcc/cr_startup_lpc43xx.c
+  endif ()
-      ${SDK_DIR}/src/chip_18xx_43xx.c
-      ${SDK_DIR}/src/clock_18xx_43xx.c
-      ${SDK_DIR}/src/fpu_init.c
-      ${SDK_DIR}/src/gpio_18xx_43xx.c
-      ${SDK_DIR}/src/iap_18xx_43xx.c
-      ${SDK_DIR}/src/sysinit_18xx_43xx.c
-      ${SDK_DIR}/src/uart_18xx_43xx.c
-      )
-    target_compile_options(${BOARD_TARGET} PUBLIC
-      -nostdlib
-      )
-    target_compile_definitions(${BOARD_TARGET} PUBLIC
-      __USE_LPCOPEN
-      CORE_M4
-      )
-    target_include_directories(${BOARD_TARGET} PUBLIC
-      ${SDK_DIR}/inc
-      ${SDK_DIR}/inc/config_43xx
-      )
 
-    update_board(${BOARD_TARGET})
+  # Startup & Linker script
+  set(STARTUP_FILE_GNU ${SDK_DIR}/../gcc/cr_startup_lpc43xx.c)
+  set(STARTUP_FILE_IAR ${SDK_DIR}/../iar/iar_startup_lpc18xx43xx.s)
+  set(LD_FILE_IAR ${SDK_DIR}/../iar/linker/lpc18xx_43xx_ldscript_iflash.icf)
 
-    if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+  add_library(${BOARD_TARGET} STATIC
-      target_link_options(${BOARD_TARGET} PUBLIC
+    ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
-        "LINKER:--script=${LD_FILE_GNU}"
+    ${SDK_DIR}/src/chip_18xx_43xx.c
-        # nanolib
+    ${SDK_DIR}/src/clock_18xx_43xx.c
-        --specs=nosys.specs
+    ${SDK_DIR}/src/fpu_init.c
-        --specs=nano.specs
+    ${SDK_DIR}/src/gpio_18xx_43xx.c
-        )
+    ${SDK_DIR}/src/iap_18xx_43xx.c
-    elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+    ${SDK_DIR}/src/sysinit_18xx_43xx.c
-      target_link_options(${BOARD_TARGET} PUBLIC
+    ${SDK_DIR}/src/uart_18xx_43xx.c
-        "LINKER:--config=${LD_FILE_IAR}"
+    )
-        )
+  target_compile_definitions(${BOARD_TARGET} PUBLIC
-    endif ()
+    __USE_LPCOPEN
+    CORE_M4
+    )
+  target_include_directories(${BOARD_TARGET} PUBLIC
+    ${SDK_DIR}/inc
+    ${SDK_DIR}/inc/config_43xx
+    )
+
+  update_board(${BOARD_TARGET})
+
+  if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    target_compile_options(${BOARD_TARGET} PUBLIC -nostdlib)
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_GNU}"
+      # nanolib
+      --specs=nosys.specs
+      --specs=nano.specs
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--config=${LD_FILE_IAR}"
+      )
   endif ()
 endfunction()
 

test/hil/hil_hfp.json

@@ -13,6 +13,13 @@
             "debugger": "jlink",
             "debugger_sn": "770935966",
             "cpu": "STM32F746NG"
+        },
+        {
+            "name": "lpcxpresso43s67",
+            "uid": "08F000044528BAAA8D858F58C50700F5",
+            "debugger": "jlink",
+            "debugger_sn": "728973776",
+            "cpu": "LPC43S67_M4"
         }
     ]
 }

tools/get_deps.py

@@ -48,7 +48,7 @@ deps_optional = {
                        '2204191ec76283371419fbcec207da02e1bc22fa',
                        'nuc'],
     'hw/mcu/nxp/lpcopen': ['https://github.com/hathach/nxp_lpcopen.git',
-                           '43c45c85405a5dd114fff0ea95cca62837740c13',
+                           '84e0bd3e43910aaf71eefd62075cf57495418312',
                            'lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43'],
     'hw/mcu/nxp/mcux-sdk': ['https://github.com/hathach/mcux-sdk.git',
                             '950819b7de9b32f92c3edf396bc5ffb8d66e7009',