andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

Merge pull request #223 from hathach/develop

Browse Source 
Added board RT1050 EVKB, RT1020 EVK, RT1015 EVK
This commit is contained in:
Ha Thach
2019-11-23 01:26:58 +07:00
committed by GitHub
parent 98c5084292 9758f3e461
commit 0ee70512ac
20 changed files with 1763 additions and 21 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
README.md
View File

@@ -25,14 +25,14 @@ TinyUSB is an open-source cross-platform USB Host/Device stack for embedded syst
The stack supports the following MCUs
- **Tomu:** [valentyusb](https://github.com/im-tomu/valentyusb) (eptri)
- **MicroChip:** SAMD21, SAMD51 (device only)
- **Nordic:** nRF52840, nRF52833
- **NXP:**
- LPC Series: 11Uxx, 13xx, 175x_6x, 177x_8x, 18xx, 40xx, 43xx, 51Uxx, 54xxx, 55xx
- iMX RT Series: RT1060, RT1064
- iMX RT Series: RT1015, RT1021, RT1052, RT1062, RT1064
- **Sony:** CXD56
- **ST:** STM32 series: L0, F0, F1, F2, F3, F4, F7, H7 (device only)
- **Tomu:** [valentyusb](https://github.com/im-tomu/valentyusb) (eptri)
[Here is the list of supported Boards](docs/boards.md) that can be used with provided examples.

13
docs/boards.md
View File

@@ -9,10 +9,6 @@ The board support code is only used for self-contained examples and testing. It
This code base already had supported for a handful of following boards
## Tomu
- [Fomu](https://www.crowdsupply.com/sutajio-kosagi/fomu)
### MicroChip SAMD
- [Adafruit Circuit Playground Express](https://www.adafruit.com/product/3333)
@@ -32,8 +28,11 @@ This code base already had supported for a handful of following boards
### NXP iMX RT
- [MIMX RT1064 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/mimxrt1064-evk-i.mx-rt1064-evaluation-kit:MIMXRT1064-EVK)
- [MIMX RT1015 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1015-evaluation-kit:MIMXRT1015-EVK)
- [MIMX RT1020 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1020-evaluation-kit:MIMXRT1020-EVK)
- [MIMX RT1050 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK)
- [MIMX RT1060 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/mimxrt1060-evk-i.mx-rt1060-evaluation-kit:MIMXRT1060-EVK)
- [MIMX RT1064 Evaluation Kit](https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/mimxrt1064-evk-i.mx-rt1064-evaluation-kit:MIMXRT1064-EVK)
### NXP LPC
@@ -70,6 +69,10 @@ This code base already had supported for a handful of following boards
- [STM32 F767zi Nucleo](https://www.st.com/en/evaluation-tools/nucleo-f767zi.html)
- [STM32 H743zi Nucleo](https://www.st.com/en/evaluation-tools/nucleo-h743zi.html)
### Tomu
- [Fomu](https://www.crowdsupply.com/sutajio-kosagi/fomu)
## Add your own board
If you don't possess any of supported board above. Don't worry you can easily implemented your own one by following this guide as long as the mcu is supported.

34
hw/bsp/mimxrt1015_evk/board.h Normal file
View File

@@ -0,0 +1,34 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2019, Ha Thach (tinyusb.org)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#ifndef BOARD_H_
#define BOARD_H_
// required since iMX RT10xx SDK include this file for board size
#define BOARD_FLASH_SIZE (0x1000000U)
#endif /* BOARD_H_ */

52
hw/bsp/mimxrt1015_evk/board.mk Normal file
View File

@@ -0,0 +1,52 @@
CFLAGS += \
-mthumb \
-mabi=aapcs \
-mcpu=cortex-m7 \
-mfloat-abi=hard \
-mfpu=fpv5-d16 \
-D__ARMVFP__=0 -D__ARMFPV5__=0\
-DCPU_MIMXRT1015DAF5A \
-DXIP_EXTERNAL_FLASH=1 \
-DXIP_BOOT_HEADER_ENABLE=1 \
-DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX
# mcu driver cause following warnings
CFLAGS += -Wno-error=unused-parameter -Wno-error=implicit-fallthrough=
MCU_DIR = hw/mcu/nxp/sdk/devices/MIMXRT1015
# All source paths should be relative to the top level.
LD_FILE = $(MCU_DIR)/gcc/MIMXRT1015xxxxx_flexspi_nor.ld
SRC_C += \
$(MCU_DIR)/system_MIMXRT1015.c \
$(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \
$(MCU_DIR)/project_template/clock_config.c \
$(MCU_DIR)/drivers/fsl_clock.c \
$(MCU_DIR)/drivers/fsl_gpio.c \
$(MCU_DIR)/drivers/fsl_common.c \
$(MCU_DIR)/drivers/fsl_lpuart.c
INC += \
$(TOP)/hw/bsp/$(BOARD) \
$(TOP)/$(MCU_DIR)/../../CMSIS/Include \
$(TOP)/$(MCU_DIR) \
$(TOP)/$(MCU_DIR)/drivers \
$(TOP)/$(MCU_DIR)/project_template \
SRC_S += $(MCU_DIR)/gcc/startup_MIMXRT1015.S
# For TinyUSB port source
VENDOR = nxp
CHIP_FAMILY = transdimension
# For freeRTOS port source
FREERTOS_PORT = ARM_CM7
# For flash-jlink target
JLINK_DEVICE = MIMXRT1015DAF5A
JLINK_IF = swd
# flash by copying bin file to DAP Mass Storage
flash: $(BUILD)/$(BOARD)-firmware.bin
cp $< /media/$(USER)/RT1015-EVK/

48
hw/bsp/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.c Normal file
View File

@@ -0,0 +1,48 @@
/*
* Copyright 2018-2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "evkmimxrt1015_flexspi_nor_config.h"
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.sflashPadType = kSerialFlash_4Pads,
.serialClkFreq = kFlexSpiSerialClk_100MHz,
.sflashA1Size = 16u * 1024u * 1024u,
.lookupTable =
{
// Read LUTs
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
},
},
.pageSize = 256u,
.sectorSize = 4u * 1024u,
.blockSize = 256u * 1024u,
.isUniformBlockSize = false,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

268
hw/bsp/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.h Normal file
View File

@@ -0,0 +1,268 @@
/*
* Copyright 2018-2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __EVKMIMXRT1015_FLEXSPI_NOR_CONFIG__
#define __EVKMIMXRT1015_FLEXSPI_NOR_CONFIG__
#include <stdint.h>
#include <stdbool.h>
#include "fsl_common.h"
/*! @name Driver version */
/*@{*/
/*! @brief XIP_BOARD driver version 2.0.0. */
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/* FLEXSPI memory config block related defintions */
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
#define FLEXSPI_CFG_BLK_SIZE (512)
/* FLEXSPI Feature related definitions */
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
/* Lookup table related defintions */
#define CMD_INDEX_READ 0
#define CMD_INDEX_READSTATUS 1
#define CMD_INDEX_WRITEENABLE 2
#define CMD_INDEX_WRITE 4
#define CMD_LUT_SEQ_IDX_READ 0
#define CMD_LUT_SEQ_IDX_READSTATUS 1
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define CMD_LUT_SEQ_IDX_WRITE 9
#define CMD_SDR 0x01
#define CMD_DDR 0x21
#define RADDR_SDR 0x02
#define RADDR_DDR 0x22
#define CADDR_SDR 0x03
#define CADDR_DDR 0x23
#define MODE1_SDR 0x04
#define MODE1_DDR 0x24
#define MODE2_SDR 0x05
#define MODE2_DDR 0x25
#define MODE4_SDR 0x06
#define MODE4_DDR 0x26
#define MODE8_SDR 0x07
#define MODE8_DDR 0x27
#define WRITE_SDR 0x08
#define WRITE_DDR 0x28
#define READ_SDR 0x09
#define READ_DDR 0x29
#define LEARN_SDR 0x0A
#define LEARN_DDR 0x2A
#define DATSZ_SDR 0x0B
#define DATSZ_DDR 0x2B
#define DUMMY_SDR 0x0C
#define DUMMY_DDR 0x2C
#define DUMMY_RWDS_SDR 0x0D
#define DUMMY_RWDS_DDR 0x2D
#define JMP_ON_CS 0x1F
#define STOP 0
#define FLEXSPI_1PAD 0
#define FLEXSPI_2PAD 1
#define FLEXSPI_4PAD 2
#define FLEXSPI_8PAD 3
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
//!@brief Definitions for FlexSPI Serial Clock Frequency
typedef enum _FlexSpiSerialClockFreq
{
kFlexSpiSerialClk_30MHz = 1,
kFlexSpiSerialClk_50MHz = 2,
kFlexSpiSerialClk_60MHz = 3,
kFlexSpiSerialClk_75MHz = 4,
kFlexSpiSerialClk_80MHz = 5,
kFlexSpiSerialClk_100MHz = 6,
kFlexSpiSerialClk_133MHz = 7,
kFlexSpiSerialClk_166MHz = 8,
kFlexSpiSerialClk_200MHz = 9,
} flexspi_serial_clk_freq_t;
//!@brief FlexSPI clock configuration type
enum
{
kFlexSpiClk_SDR, //!< Clock configure for SDR mode
kFlexSpiClk_DDR, //!< Clock configurat for DDR mode
};
//!@brief FlexSPI Read Sample Clock Source definition
typedef enum _FlashReadSampleClkSource
{
kFlexSPIReadSampleClk_LoopbackInternally = 0,
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
} flexspi_read_sample_clk_t;
//!@brief Misc feature bit definitions
enum
{
kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable
kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable
kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable
kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable
kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication.
};
//!@brief Flash Type Definition
enum
{
kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR
kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND
kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
};
//!@brief Flash Pad Definitions
enum
{
kSerialFlash_1Pad = 1,
kSerialFlash_2Pads = 2,
kSerialFlash_4Pads = 4,
kSerialFlash_8Pads = 8,
};
//!@brief FlexSPI LUT Sequence structure
typedef struct _lut_sequence
{
uint8_t seqNum; //!< Sequence Number, valid number: 1-16
uint8_t seqId; //!< Sequence Index, valid number: 0-15
uint16_t reserved;
} flexspi_lut_seq_t;
//!@brief Flash Configuration Command Type
enum
{
kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc
kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command
kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode
kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode
kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode
kDeviceConfigCmdType_Reset, //!< Reset device command
};
//!@brief FlexSPI Memory Configuration Block
typedef struct _FlexSPIConfig
{
uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL
uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use
uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3
uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3
uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
//! Serial NAND, need to refer to datasheet
uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
//! Generic configuration, etc.
uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
//! DPI/QPI/OPI switch or reset command
flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
//! sequence number, [31:16] Reserved
uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration
uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
flexspi_lut_seq_t
configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use
uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands
uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use
uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
//! details
uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details
uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
//! Chapter for more details
uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
//! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use
uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1
uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2
uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1
uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2
uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value
uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value
uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value
uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value
uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command
uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands
uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31
uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
//! busy flag is 0 when flash device is busy
uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences
flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences
uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use
} flexspi_mem_config_t;
/* */
#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0
#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1
#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2
#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3
#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4
#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5
#define NOR_CMD_INDEX_DUMMY 6 //!< 6
#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7
#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \
CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \
2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \
CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \
4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \
CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block
#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block
#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \
14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \
15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk
/*
* Serial NOR configuration block
*/
typedef struct _flexspi_nor_config
{
flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI
uint32_t pageSize; //!< Page size of Serial NOR
uint32_t sectorSize; //!< Sector size of Serial NOR
uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command
uint8_t isUniformBlockSize; //!< Sector/Block size is the same
uint8_t reserved0[2]; //!< Reserved for future use
uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3
uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command
uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false
uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution
uint32_t blockSize; //!< Block size
uint32_t reserve2[11]; //!< Reserved for future use
} flexspi_nor_config_t;
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __EVKMIMXRT1015_FLEXSPI_NOR_CONFIG__ */

170
hw/bsp/mimxrt1015_evk/mimxrt1015_evk.c Normal file
View File

@@ -0,0 +1,170 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2018, hathach (tinyusb.org)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#include "../board.h"
#include "fsl_device_registers.h"
#include "fsl_gpio.h"
#include "fsl_iomuxc.h"
#include "fsl_clock.h"
#include "fsl_lpuart.h"
#include "clock_config.h"
#define LED_PINMUX IOMUXC_GPIO_SD_B1_01_GPIO3_IO21
#define LED_PORT GPIO3
#define LED_PIN 21
#define LED_STATE_ON 0
// SW8 button
#define BUTTON_PINMUX IOMUXC_GPIO_EMC_09_GPIO2_IO09
#define BUTTON_PORT GPIO2
#define BUTTON_PIN 9
#define BUTTON_STATE_ACTIVE 0
// UART
#define UART_PORT LPUART1
#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_07_LPUART1_RX
#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_06_LPUART1_TX
const uint8_t dcd_data[] = { 0x00 };
void board_init(void)
{
// Init clock
BOARD_BootClockRUN();
SystemCoreClockUpdate();
// Enable IOCON clock
CLOCK_EnableClock(kCLOCK_Iomuxc);
#if CFG_TUSB_OS == OPT_OS_NONE
// 1ms tick timer
SysTick_Config(SystemCoreClock / 1000);
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
// NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
#endif
// LED
IOMUXC_SetPinMux( LED_PINMUX, 0U);
IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U);
gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode };
GPIO_PinInit(LED_PORT, LED_PIN, &led_config);
board_led_write(true);
// Button
IOMUXC_SetPinMux( BUTTON_PINMUX, 0U);
IOMUXC_SetPinConfig(BUTTON_PINMUX, 0x01B0A0U);
gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_IntRisingEdge, };
GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config);
// UART
IOMUXC_SetPinMux( UART_TX_PINMUX, 0U);
IOMUXC_SetPinMux( UART_RX_PINMUX, 0U);
IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u);
IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u);
lpuart_config_t uart_config;
LPUART_GetDefaultConfig(&uart_config);
uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE;
uart_config.enableTx = true;
uart_config.enableRx = true;
LPUART_Init(UART_PORT, &uart_config, (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U));
//------------- USB0 -------------//
// Clock
CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U);
CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U);
USBPHY_Type* usb_phy = USBPHY;
// Enable PHY support for Low speed device + LS via FS Hub
usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK;
// Enable all power for normal operation
usb_phy->PWD = 0;
// TX Timing
uint32_t phytx = usb_phy->TX;
phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK);
phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06);
usb_phy->TX = phytx;
}
//--------------------------------------------------------------------+
// USB Interrupt Handler
//--------------------------------------------------------------------+
void USB_OTG1_IRQHandler(void)
{
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST
tuh_isr(0);
#endif
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE
tud_isr(0);
#endif
}
//--------------------------------------------------------------------+
// Board porting API
//--------------------------------------------------------------------+
void board_led_write(bool state)
{
GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
}
uint32_t board_button_read(void)
{
// active low
return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN);
}
int board_uart_read(uint8_t* buf, int len)
{
LPUART_ReadBlocking(UART_PORT, buf, len);
return len;
}
int board_uart_write(void const * buf, int len)
{
LPUART_WriteBlocking(UART_PORT, (uint8_t*)buf, len);
return len;
}
#if CFG_TUSB_OS == OPT_OS_NONE
volatile uint32_t system_ticks = 0;
void SysTick_Handler(void)
{
system_ticks++;
}
uint32_t board_millis(void)
{
return system_ticks;
}
#endif

34
hw/bsp/mimxrt1020_evk/board.h Normal file
View File

@@ -0,0 +1,34 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2019, Ha Thach (tinyusb.org)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#ifndef BOARD_H_
#define BOARD_H_
// required since iMX RT10xx SDK include this file for board size
#define BOARD_FLASH_SIZE (0x800000U)
#endif /* BOARD_H_ */

53
hw/bsp/mimxrt1020_evk/board.mk Normal file
View File

@@ -0,0 +1,53 @@
CFLAGS += \
-mthumb \
-mabi=aapcs \
-mcpu=cortex-m7 \
-mfloat-abi=hard \
-mfpu=fpv5-d16 \
-D__ARMVFP__=0 -D__ARMFPV5__=0\
-DCPU_MIMXRT1021DAG5A \
-DXIP_EXTERNAL_FLASH=1 \
-DXIP_BOOT_HEADER_ENABLE=1 \
-DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX
# mcu driver cause following warnings
#CFLAGS += -Wno-error=float-equal -Wno-error=nested-externs
CFLAGS += -Wno-error=unused-parameter
MCU_DIR = hw/mcu/nxp/sdk/devices/MIMXRT1021
# All source paths should be relative to the top level.
LD_FILE = $(MCU_DIR)/gcc/MIMXRT1021xxxxx_flexspi_nor.ld
SRC_C += \
$(MCU_DIR)/system_MIMXRT1021.c \
$(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \
$(MCU_DIR)/project_template/clock_config.c \
$(MCU_DIR)/drivers/fsl_clock.c \
$(MCU_DIR)/drivers/fsl_gpio.c \
$(MCU_DIR)/drivers/fsl_common.c \
$(MCU_DIR)/drivers/fsl_lpuart.c
INC += \
$(TOP)/hw/bsp/$(BOARD) \
$(TOP)/$(MCU_DIR)/../../CMSIS/Include \
$(TOP)/$(MCU_DIR) \
$(TOP)/$(MCU_DIR)/drivers \
$(TOP)/$(MCU_DIR)/project_template \
SRC_S += $(MCU_DIR)/gcc/startup_MIMXRT1021.S
# For TinyUSB port source
VENDOR = nxp
CHIP_FAMILY = transdimension
# For freeRTOS port source
FREERTOS_PORT = ARM_CM7
# For flash-jlink target
JLINK_DEVICE = MIMXRT1021DAG5A
JLINK_IF = swd
# flash by copying bin file to DAP Mass Storage
flash: $(BUILD)/$(BOARD)-firmware.bin
cp $< /media/$(USER)/RT1020-EVK/

49
hw/bsp/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.c Normal file
View File

@@ -0,0 +1,49 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "evkmimxrt1020_flexspi_nor_config.h"
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t qspiflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
// Enable DDR mode, Wordaddassable, Safe configuration, Differential clock
.sflashPadType = kSerialFlash_4Pads,
.serialClkFreq = kFlexSpiSerialClk_100MHz,
.sflashA1Size = 8u * 1024u * 1024u,
.lookupTable =
{
// Read LUTs
FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
},
},
.pageSize = 256u,
.sectorSize = 4u * 1024u,
.blockSize = 256u * 1024u,
.isUniformBlockSize = false,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

268
hw/bsp/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.h Normal file
View File

@@ -0,0 +1,268 @@
/*
* Copyright 2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __EVKMIMXRT1020_FLEXSPI_NOR_CONFIG__
#define __EVKMIMXRT1020_FLEXSPI_NOR_CONFIG__
#include <stdint.h>
#include <stdbool.h>
#include "fsl_common.h"
/*! @name Driver version */
/*@{*/
/*! @brief XIP_BOARD driver version 2.0.0. */
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/* FLEXSPI memory config block related defintions */
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
#define FLEXSPI_CFG_BLK_SIZE (512)
/* FLEXSPI Feature related definitions */
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
/* Lookup table related defintions */
#define CMD_INDEX_READ 0
#define CMD_INDEX_READSTATUS 1
#define CMD_INDEX_WRITEENABLE 2
#define CMD_INDEX_WRITE 4
#define CMD_LUT_SEQ_IDX_READ 0
#define CMD_LUT_SEQ_IDX_READSTATUS 1
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define CMD_LUT_SEQ_IDX_WRITE 9
#define CMD_SDR 0x01
#define CMD_DDR 0x21
#define RADDR_SDR 0x02
#define RADDR_DDR 0x22
#define CADDR_SDR 0x03
#define CADDR_DDR 0x23
#define MODE1_SDR 0x04
#define MODE1_DDR 0x24
#define MODE2_SDR 0x05
#define MODE2_DDR 0x25
#define MODE4_SDR 0x06
#define MODE4_DDR 0x26
#define MODE8_SDR 0x07
#define MODE8_DDR 0x27
#define WRITE_SDR 0x08
#define WRITE_DDR 0x28
#define READ_SDR 0x09
#define READ_DDR 0x29
#define LEARN_SDR 0x0A
#define LEARN_DDR 0x2A
#define DATSZ_SDR 0x0B
#define DATSZ_DDR 0x2B
#define DUMMY_SDR 0x0C
#define DUMMY_DDR 0x2C
#define DUMMY_RWDS_SDR 0x0D
#define DUMMY_RWDS_DDR 0x2D
#define JMP_ON_CS 0x1F
#define STOP 0
#define FLEXSPI_1PAD 0
#define FLEXSPI_2PAD 1
#define FLEXSPI_4PAD 2
#define FLEXSPI_8PAD 3
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
//!@brief Definitions for FlexSPI Serial Clock Frequency
typedef enum _FlexSpiSerialClockFreq
{
kFlexSpiSerialClk_30MHz = 1,
kFlexSpiSerialClk_50MHz = 2,
kFlexSpiSerialClk_60MHz = 3,
kFlexSpiSerialClk_75MHz = 4,
kFlexSpiSerialClk_80MHz = 5,
kFlexSpiSerialClk_100MHz = 6,
kFlexSpiSerialClk_133MHz = 7,
kFlexSpiSerialClk_166MHz = 8,
kFlexSpiSerialClk_200MHz = 9,
} flexspi_serial_clk_freq_t;
//!@brief FlexSPI clock configuration type
enum
{
kFlexSpiClk_SDR, //!< Clock configure for SDR mode
kFlexSpiClk_DDR, //!< Clock configurat for DDR mode
};
//!@brief FlexSPI Read Sample Clock Source definition
typedef enum _FlashReadSampleClkSource
{
kFlexSPIReadSampleClk_LoopbackInternally = 0,
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
} flexspi_read_sample_clk_t;
//!@brief Misc feature bit definitions
enum
{
kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable
kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable
kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable
kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable
kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication.
};
//!@brief Flash Type Definition
enum
{
kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR
kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND
kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
};
//!@brief Flash Pad Definitions
enum
{
kSerialFlash_1Pad = 1,
kSerialFlash_2Pads = 2,
kSerialFlash_4Pads = 4,
kSerialFlash_8Pads = 8,
};
//!@brief FlexSPI LUT Sequence structure
typedef struct _lut_sequence
{
uint8_t seqNum; //!< Sequence Number, valid number: 1-16
uint8_t seqId; //!< Sequence Index, valid number: 0-15
uint16_t reserved;
} flexspi_lut_seq_t;
//!@brief Flash Configuration Command Type
enum
{
kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc
kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command
kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode
kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode
kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode
kDeviceConfigCmdType_Reset, //!< Reset device command
};
//!@brief FlexSPI Memory Configuration Block
typedef struct _FlexSPIConfig
{
uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL
uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use
uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3
uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3
uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
//! Serial NAND, need to refer to datasheet
uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
//! Generic configuration, etc.
uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
//! DPI/QPI/OPI switch or reset command
flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
//! sequence number, [31:16] Reserved
uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration
uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
flexspi_lut_seq_t
configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use
uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands
uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use
uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
//! details
uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details
uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
//! Chapter for more details
uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
//! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use
uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1
uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2
uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1
uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2
uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value
uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value
uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value
uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value
uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command
uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands
uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31
uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
//! busy flag is 0 when flash device is busy
uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences
flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences
uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use
} flexspi_mem_config_t;
/* */
#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0
#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1
#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2
#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3
#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4
#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5
#define NOR_CMD_INDEX_DUMMY 6 //!< 6
#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7
#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \
CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \
2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \
CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \
4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \
CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block
#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block
#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \
14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \
15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk
/*
* Serial NOR configuration block
*/
typedef struct _flexspi_nor_config
{
flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI
uint32_t pageSize; //!< Page size of Serial NOR
uint32_t sectorSize; //!< Sector size of Serial NOR
uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command
uint8_t isUniformBlockSize; //!< Sector/Block size is the same
uint8_t reserved0[2]; //!< Reserved for future use
uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3
uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command
uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false
uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution
uint32_t blockSize; //!< Block size
uint32_t reserve2[11]; //!< Reserved for future use
} flexspi_nor_config_t;
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __EVKMIMXRT1020_FLEXSPI_NOR_CONFIG__ */

169
hw/bsp/mimxrt1020_evk/mimxrt1020_evk.c Normal file
View File

@@ -0,0 +1,169 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2018, hathach (tinyusb.org)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#include "../board.h"
#include "fsl_device_registers.h"
#include "fsl_gpio.h"
#include "fsl_iomuxc.h"
#include "fsl_clock.h"
#include "fsl_lpuart.h"
#include "clock_config.h"
#define LED_PINMUX IOMUXC_GPIO_AD_B0_05_GPIO1_IO05
#define LED_PORT GPIO1
#define LED_PIN 5
#define LED_STATE_ON 0
// SW8 button
#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00
#define BUTTON_PORT GPIO5
#define BUTTON_PIN 0
#define BUTTON_STATE_ACTIVE 0
// UART
#define UART_PORT LPUART1
#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_07_LPUART1_RX
#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_06_LPUART1_TX
const uint8_t dcd_data[] = { 0x00 };
void board_init(void)
{
// Init clock
BOARD_BootClockRUN();
SystemCoreClockUpdate();
// Enable IOCON clock
CLOCK_EnableClock(kCLOCK_Iomuxc);
#if CFG_TUSB_OS == OPT_OS_NONE
// 1ms tick timer
SysTick_Config(SystemCoreClock / 1000);
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
// NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
#endif
// LED
IOMUXC_SetPinMux( LED_PINMUX, 0U);
IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U);
gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode };
GPIO_PinInit(LED_PORT, LED_PIN, &led_config);
board_led_write(true);
// Button
IOMUXC_SetPinMux( BUTTON_PINMUX, 0U);
gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_IntRisingEdge, };
GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config);
// UART
IOMUXC_SetPinMux( UART_TX_PINMUX, 0U);
IOMUXC_SetPinMux( UART_RX_PINMUX, 0U);
IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u);
IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u);
lpuart_config_t uart_config;
LPUART_GetDefaultConfig(&uart_config);
uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE;
uart_config.enableTx = true;
uart_config.enableRx = true;
LPUART_Init(UART_PORT, &uart_config, (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U));
//------------- USB0 -------------//
// Clock
CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U);
CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U);
USBPHY_Type* usb_phy = USBPHY;
// Enable PHY support for Low speed device + LS via FS Hub
usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK;
// Enable all power for normal operation
usb_phy->PWD = 0;
// TX Timing
uint32_t phytx = usb_phy->TX;
phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK);
phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06);
usb_phy->TX = phytx;
}
//--------------------------------------------------------------------+
// USB Interrupt Handler
//--------------------------------------------------------------------+
void USB_OTG1_IRQHandler(void)
{
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST
tuh_isr(0);
#endif
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE
tud_isr(0);
#endif
}
//--------------------------------------------------------------------+
// Board porting API
//--------------------------------------------------------------------+
void board_led_write(bool state)
{
GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
}
uint32_t board_button_read(void)
{
// active low
return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN);
}
int board_uart_read(uint8_t* buf, int len)
{
LPUART_ReadBlocking(UART_PORT, buf, len);
return len;
}
int board_uart_write(void const * buf, int len)
{
LPUART_WriteBlocking(UART_PORT, (uint8_t*)buf, len);
return len;
}
#if CFG_TUSB_OS == OPT_OS_NONE
volatile uint32_t system_ticks = 0;
void SysTick_Handler(void)
{
system_ticks++;
}
uint32_t board_millis(void)
{
return system_ticks;
}
#endif

34
hw/bsp/mimxrt1050_evkb/board.h Normal file
View File

@@ -0,0 +1,34 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2019, Ha Thach (tinyusb.org)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#ifndef BOARD_H_
#define BOARD_H_
// required since iMX RT10xx SDK include this file for board size
#define BOARD_FLASH_SIZE (0x4000000U)
#endif /* BOARD_H_ */

53
hw/bsp/mimxrt1050_evkb/board.mk Normal file
View File

@@ -0,0 +1,53 @@
CFLAGS += \
-mthumb \
-mabi=aapcs \
-mcpu=cortex-m7 \
-mfloat-abi=hard \
-mfpu=fpv5-d16 \
-D__ARMVFP__=0 -D__ARMFPV5__=0\
-DCPU_MIMXRT1052DVL6B \
-DXIP_EXTERNAL_FLASH=1 \
-DXIP_BOOT_HEADER_ENABLE=1 \
-DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX
# mcu driver cause following warnings
#CFLAGS += -Wno-error=float-equal -Wno-error=nested-externs
CFLAGS += -Wno-error=unused-parameter
MCU_DIR = hw/mcu/nxp/sdk/devices/MIMXRT1052
# All source paths should be relative to the top level.
LD_FILE = $(MCU_DIR)/gcc/MIMXRT1052xxxxx_flexspi_nor.ld
SRC_C += \
$(MCU_DIR)/system_MIMXRT1052.c \
$(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \
$(MCU_DIR)/project_template/clock_config.c \
$(MCU_DIR)/drivers/fsl_clock.c \
$(MCU_DIR)/drivers/fsl_gpio.c \
$(MCU_DIR)/drivers/fsl_common.c \
$(MCU_DIR)/drivers/fsl_lpuart.c
INC += \
$(TOP)/hw/bsp/$(BOARD) \
$(TOP)/$(MCU_DIR)/../../CMSIS/Include \
$(TOP)/$(MCU_DIR) \
$(TOP)/$(MCU_DIR)/drivers \
$(TOP)/$(MCU_DIR)/project_template \
SRC_S += $(MCU_DIR)/gcc/startup_MIMXRT1052.S
# For TinyUSB port source
VENDOR = nxp
CHIP_FAMILY = transdimension
# For freeRTOS port source
FREERTOS_PORT = ARM_CM7
# For flash-jlink target
JLINK_DEVICE = MIMXRT1052xxx6B
JLINK_IF = swd
# flash by copying bin file to DAP Mass Storage
flash: $(BUILD)/$(BOARD)-firmware.bin
cp $< /media/$(USER)/RT1050-EVK/

55
hw/bsp/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.c Normal file
View File

@@ -0,0 +1,55 @@
/*
* Copyright 2017 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "evkbimxrt1050_flexspi_nor_config.h"
/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.xip_board"
#endif
/*******************************************************************************
* Code
******************************************************************************/
#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
__attribute__((section(".boot_hdr.conf")))
#elif defined(__ICCARM__)
#pragma location = ".boot_hdr.conf"
#endif
const flexspi_nor_config_t hyperflash_config = {
.memConfig =
{
.tag = FLEXSPI_CFG_BLK_TAG,
.version = FLEXSPI_CFG_BLK_VERSION,
.readSampleClkSrc = kFlexSPIReadSampleClk_ExternalInputFromDqsPad,
.csHoldTime = 3u,
.csSetupTime = 3u,
.columnAddressWidth = 3u,
// Enable DDR mode, Wordaddassable, Safe configuration, Differential clock
.controllerMiscOption =
(1u << kFlexSpiMiscOffset_DdrModeEnable) | (1u << kFlexSpiMiscOffset_WordAddressableEnable) |
(1u << kFlexSpiMiscOffset_SafeConfigFreqEnable) | (1u << kFlexSpiMiscOffset_DiffClkEnable),
.sflashPadType = kSerialFlash_8Pads,
.serialClkFreq = kFlexSpiSerialClk_133MHz,
.sflashA1Size = 64u * 1024u * 1024u,
.dataValidTime = {16u, 16u},
.lookupTable =
{
// Read LUTs
FLEXSPI_LUT_SEQ(CMD_DDR, FLEXSPI_8PAD, 0xA0, RADDR_DDR, FLEXSPI_8PAD, 0x18),
FLEXSPI_LUT_SEQ(CADDR_DDR, FLEXSPI_8PAD, 0x10, DUMMY_DDR, FLEXSPI_8PAD, 0x06),
FLEXSPI_LUT_SEQ(READ_DDR, FLEXSPI_8PAD, 0x04, STOP, FLEXSPI_1PAD, 0x0),
},
},
.pageSize = 512u,
.sectorSize = 256u * 1024u,
.blockSize = 256u * 1024u,
.isUniformBlockSize = true,
};
#endif /* XIP_BOOT_HEADER_ENABLE */

269
hw/bsp/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.h Normal file
View File

@@ -0,0 +1,269 @@
/*
* Copyright (c) 2016, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef __EVKBIMXRT1050_FLEXSPI_NOR_CONFIG__
#define __EVKBIMXRT1050_FLEXSPI_NOR_CONFIG__
#include <stdint.h>
#include <stdbool.h>
#include "fsl_common.h"
/*! @name Driver version */
/*@{*/
/*! @brief XIP_BOARD driver version 2.0.0. */
#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
/* FLEXSPI memory config block related defintions */
#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian
#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
#define FLEXSPI_CFG_BLK_SIZE (512)
/* FLEXSPI Feature related definitions */
#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
/* Lookup table related defintions */
#define CMD_INDEX_READ 0
#define CMD_INDEX_READSTATUS 1
#define CMD_INDEX_WRITEENABLE 2
#define CMD_INDEX_WRITE 4
#define CMD_LUT_SEQ_IDX_READ 0
#define CMD_LUT_SEQ_IDX_READSTATUS 1
#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
#define CMD_LUT_SEQ_IDX_WRITE 9
#define CMD_SDR 0x01
#define CMD_DDR 0x21
#define RADDR_SDR 0x02
#define RADDR_DDR 0x22
#define CADDR_SDR 0x03
#define CADDR_DDR 0x23
#define MODE1_SDR 0x04
#define MODE1_DDR 0x24
#define MODE2_SDR 0x05
#define MODE2_DDR 0x25
#define MODE4_SDR 0x06
#define MODE4_DDR 0x26
#define MODE8_SDR 0x07
#define MODE8_DDR 0x27
#define WRITE_SDR 0x08
#define WRITE_DDR 0x28
#define READ_SDR 0x09
#define READ_DDR 0x29
#define LEARN_SDR 0x0A
#define LEARN_DDR 0x2A
#define DATSZ_SDR 0x0B
#define DATSZ_DDR 0x2B
#define DUMMY_SDR 0x0C
#define DUMMY_DDR 0x2C
#define DUMMY_RWDS_SDR 0x0D
#define DUMMY_RWDS_DDR 0x2D
#define JMP_ON_CS 0x1F
#define STOP 0
#define FLEXSPI_1PAD 0
#define FLEXSPI_2PAD 1
#define FLEXSPI_4PAD 2
#define FLEXSPI_8PAD 3
#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \
(FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
//!@brief Definitions for FlexSPI Serial Clock Frequency
typedef enum _FlexSpiSerialClockFreq
{
kFlexSpiSerialClk_30MHz = 1,
kFlexSpiSerialClk_50MHz = 2,
kFlexSpiSerialClk_60MHz = 3,
kFlexSpiSerialClk_75MHz = 4,
kFlexSpiSerialClk_80MHz = 5,
kFlexSpiSerialClk_100MHz = 6,
kFlexSpiSerialClk_133MHz = 7,
kFlexSpiSerialClk_166MHz = 8,
kFlexSpiSerialClk_200MHz = 9,
} flexspi_serial_clk_freq_t;
//!@brief FlexSPI clock configuration type
enum
{
kFlexSpiClk_SDR, //!< Clock configure for SDR mode
kFlexSpiClk_DDR, //!< Clock configurat for DDR mode
};
//!@brief FlexSPI Read Sample Clock Source definition
typedef enum _FlashReadSampleClkSource
{
kFlexSPIReadSampleClk_LoopbackInternally = 0,
kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1,
kFlexSPIReadSampleClk_LoopbackFromSckPad = 2,
kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
} flexspi_read_sample_clk_t;
//!@brief Misc feature bit definitions
enum
{
kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable
kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable
kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable
kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable
kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable
kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable
kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication.
};
//!@brief Flash Type Definition
enum
{
kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR
kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND
kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH
kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
};
//!@brief Flash Pad Definitions
enum
{
kSerialFlash_1Pad = 1,
kSerialFlash_2Pads = 2,
kSerialFlash_4Pads = 4,
kSerialFlash_8Pads = 8,
};
//!@brief FlexSPI LUT Sequence structure
typedef struct _lut_sequence
{
uint8_t seqNum; //!< Sequence Number, valid number: 1-16
uint8_t seqId; //!< Sequence Index, valid number: 0-15
uint16_t reserved;
} flexspi_lut_seq_t;
//!@brief Flash Configuration Command Type
enum
{
kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc
kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command
kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode
kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode
kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode
kDeviceConfigCmdType_Reset, //!< Reset device command
};
//!@brief FlexSPI Memory Configuration Block
typedef struct _FlexSPIConfig
{
uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL
uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use
uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3
uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3
uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
//! Serial NAND, need to refer to datasheet
uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
//! Generic configuration, etc.
uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
//! DPI/QPI/OPI switch or reset command
flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
//! sequence number, [31:16] Reserved
uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration
uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
flexspi_lut_seq_t
configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use
uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands
uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use
uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
//! details
uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details
uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
//! Chapter for more details
uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
//! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use
uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1
uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2
uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1
uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2
uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value
uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value
uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value
uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value
uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command
uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands
uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31
uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
//! busy flag is 0 when flash device is busy
uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences
flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences
uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use
} flexspi_mem_config_t;
/* */
#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0
#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1
#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2
#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3
#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4
#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5
#define NOR_CMD_INDEX_DUMMY 6 //!< 6
#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7
#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \
CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \
2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \
CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \
4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \
CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block
#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block
#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \
14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block
#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \
15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk
/*
* Serial NOR configuration block
*/
typedef struct _flexspi_nor_config
{
flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI
uint32_t pageSize; //!< Page size of Serial NOR
uint32_t sectorSize; //!< Sector size of Serial NOR
uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command
uint8_t isUniformBlockSize; //!< Sector/Block size is the same
uint8_t reserved0[2]; //!< Reserved for future use
uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3
uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command
uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false
uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution
uint32_t blockSize; //!< Block size
uint32_t reserve2[11]; //!< Reserved for future use
} flexspi_nor_config_t;
#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif
#endif /* __EVKBIMXRT1050_FLEXSPI_NOR_CONFIG__ */

184
hw/bsp/mimxrt1050_evkb/mimxrt1050_evkb.c Normal file
View File

@@ -0,0 +1,184 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2018, hathach (tinyusb.org)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#include "../board.h"
#include "fsl_device_registers.h"
#include "fsl_gpio.h"
#include "fsl_iomuxc.h"
#include "fsl_clock.h"
#include "fsl_lpuart.h"
#include "clock_config.h"
#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09
#define LED_PORT GPIO1
#define LED_PIN 9
#define LED_STATE_ON 0
// SW8 button
#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00
#define BUTTON_PORT GPIO5
#define BUTTON_PIN 0
#define BUTTON_STATE_ACTIVE 0
// UART
#define UART_PORT LPUART1
#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX
#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX
const uint8_t dcd_data[] = { 0x00 };
void board_init(void)
{
// Init clock
BOARD_BootClockRUN();
SystemCoreClockUpdate();
// Enable IOCON clock
CLOCK_EnableClock(kCLOCK_Iomuxc);
#if CFG_TUSB_OS == OPT_OS_NONE
// 1ms tick timer
SysTick_Config(SystemCoreClock / 1000);
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
// NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
#endif
// LED
IOMUXC_SetPinMux( LED_PINMUX, 0U);
IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U);
gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode };
GPIO_PinInit(LED_PORT, LED_PIN, &led_config);
board_led_write(true);
// Button
IOMUXC_SetPinMux( BUTTON_PINMUX, 0U);
gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_IntRisingEdge, };
GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config);
// UART
IOMUXC_SetPinMux( UART_TX_PINMUX, 0U);
IOMUXC_SetPinMux( UART_RX_PINMUX, 0U);
IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u);
IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u);
lpuart_config_t uart_config;
LPUART_GetDefaultConfig(&uart_config);
uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE;
uart_config.enableTx = true;
uart_config.enableRx = true;
LPUART_Init(UART_PORT, &uart_config, (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U));
//------------- USB0 -------------//
// Clock
CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U);
CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U);
USBPHY_Type* usb_phy = USBPHY1;
// Enable PHY support for Low speed device + LS via FS Hub
usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK;
// Enable all power for normal operation
usb_phy->PWD = 0;
// TX Timing
uint32_t phytx = usb_phy->TX;
phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK);
phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06);
usb_phy->TX = phytx;
// USB1
// CLOCK_EnableUsbhs1PhyPllClock(kCLOCK_Usbphy480M, 480000000U);
// CLOCK_EnableUsbhs1Clock(kCLOCK_Usb480M, 480000000U);
}
//--------------------------------------------------------------------+
// USB Interrupt Handler
//--------------------------------------------------------------------+
void USB_OTG1_IRQHandler(void)
{
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST
tuh_isr(0);
#endif
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE
tud_isr(0);
#endif
}
void USB_OTG2_IRQHandler(void)
{
#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST
tuh_isr(1);
#endif
#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE
tud_isr(1);
#endif
}
//--------------------------------------------------------------------+
// Board porting API
//--------------------------------------------------------------------+
void board_led_write(bool state)
{
GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
}
uint32_t board_button_read(void)
{
// active low
return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN);
}
int board_uart_read(uint8_t* buf, int len)
{
LPUART_ReadBlocking(UART_PORT, buf, len);
return len;
}
int board_uart_write(void const * buf, int len)
{
LPUART_WriteBlocking(UART_PORT, (uint8_t*)buf, len);
return len;
}
#if CFG_TUSB_OS == OPT_OS_NONE
volatile uint32_t system_ticks = 0;
void SysTick_Handler(void)
{
system_ticks++;
}
uint32_t board_millis(void)
{
return system_ticks;
}
#endif

9
hw/bsp/mimxrt1060_evk/board.mk
View File

@@ -8,9 +8,7 @@ CFLAGS += \
-DCPU_MIMXRT1062DVL6A \
-DXIP_EXTERNAL_FLASH=1 \
-DXIP_BOOT_HEADER_ENABLE=1 \
-DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX \
-DCFG_TUSB_MEM_SECTION='__attribute__((section(".data")))' \
-DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))'
-DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX
# mcu driver cause following warnings
#CFLAGS += -Wno-error=float-equal -Wno-error=nested-externs
@@ -50,9 +48,6 @@ FREERTOS_PORT = ARM_CM7
JLINK_DEVICE = MIMXRT1062xxx6A
JLINK_IF = swd
# flash using pyocd
#flash: $(BUILD)/$(BOARD)-firmware.hex
# pyocd flash -t mimxrt1050_quadspi $<
# flash by copying bin file to DAP Mass Storage
flash: $(BUILD)/$(BOARD)-firmware.bin
cp $< /media/$(USER)/RT1060-EVK/

9
hw/bsp/mimxrt1064_evk/board.mk
View File

@@ -8,9 +8,7 @@ CFLAGS += \
-DCPU_MIMXRT1064DVL6A \
-DXIP_EXTERNAL_FLASH=1 \
-DXIP_BOOT_HEADER_ENABLE=1 \
-DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX \
-DCFG_TUSB_MEM_SECTION='__attribute__((section(".data")))' \
-DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))'
-DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX
# mcu driver cause following warnings
#CFLAGS += -Wno-error=float-equal -Wno-error=nested-externs
@@ -50,9 +48,6 @@ FREERTOS_PORT = ARM_CM7
JLINK_DEVICE = MIMXRT1064xxx6A
JLINK_IF = swd
# flash using pyocd
#flash: $(BUILD)/$(BOARD)-firmware.hex
# pyocd flash -t mimxrt1050_quadspi $<
# flash by copying bin file to DAP Mass Storage
flash: $(BUILD)/$(BOARD)-firmware.bin
cp $< /media/$(USER)/RT1064-EVK/

9
src/portable/nxp/transdimension/dcd_transdimension.c
View File

@@ -38,8 +38,17 @@
#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
#include "fsl_device_registers.h"
// RT1010 and RT1020 only has 1 USB controller
#if FSL_FEATURE_SOC_USBHS_COUNT == 1
#define DCD_REGS_BASE { (dcd_registers_t*) USB_BASE }
IRQn_Type DCD_IRQn[] = { USB_OTG1_IRQn };
// RT1050, RT1060 has 2 USB controllers
#else
#define DCD_REGS_BASE { (dcd_registers_t*) USB1_BASE, (dcd_registers_t*) USB2_BASE }
IRQn_Type DCD_IRQn[] = { USB_OTG1_IRQn, USB_OTG2_IRQn };
#endif
#else
#include "chip.h"