andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

Merge branch 'hathach:master' into master

Browse Source
This commit is contained in:
沈玴興
2023-12-28 00:29:41 +08:00
committed by GitHub
parent 9a1559a356 ae364b1460
commit 149b50a2fa
74 changed files with 2067 additions and 734 deletions
Download Patch File Download Diff File Expand all files Collapse all files

18
examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
View File

@@ -96,6 +96,7 @@
#define configUSE_TICK_HOOK 0
#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning
#define configCHECK_FOR_STACK_OVERFLOW 2
#define configCHECK_HANDLER_INSTALLATION 0
/* Run time and task stats gathering related definitions. */
#define configGENERATE_RUN_TIME_STATS 0
@@ -130,23 +131,6 @@
#define INCLUDE_xEventGroupSetBitFromISR 0
#define INCLUDE_xTimerPendFunctionCall 0
/* Define to trap errors during development. */
// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
#define configASSERT(_exp) \
do {\
if ( !(_exp) ) { \
volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \
taskDISABLE_INTERRUPTS(); \
__asm("BKPT #0\n"); \
}\
}\
} while(0)
#else
#define configASSERT( x )
#endif
#ifdef __RX__
/* Renesas RX series */
#define vSoftwareInterruptISR INT_Excep_ICU_SWINT

18
examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
View File

@@ -96,6 +96,7 @@
#define configUSE_TICK_HOOK 0
#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning
#define configCHECK_FOR_STACK_OVERFLOW 2
#define configCHECK_HANDLER_INSTALLATION 0
/* Run time and task stats gathering related definitions. */
#define configGENERATE_RUN_TIME_STATS 0
@@ -130,23 +131,6 @@
#define INCLUDE_xEventGroupSetBitFromISR 0
#define INCLUDE_xTimerPendFunctionCall 0
/* Define to trap errors during development. */
// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
#define configASSERT(_exp) \
do {\
if ( !(_exp) ) { \
volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \
taskDISABLE_INTERRUPTS(); \
__asm("BKPT #0\n"); \
}\
}\
} while(0)
#else
#define configASSERT( x )
#endif
#ifdef __RX__
/* Renesas RX series */
#define vSoftwareInterruptISR INT_Excep_ICU_SWINT

64
examples/host/bare_api/src/tusb_config.h
View File

@@ -30,28 +30,8 @@
extern "C" {
#endif
//--------------------------------------------------------------------+
// Board Specific Configuration
//--------------------------------------------------------------------+
#if CFG_TUSB_MCU == OPT_MCU_RP2040
// change to 1 if using pico-pio-usb as host controller for raspberry rp2040
#define CFG_TUH_RPI_PIO_USB 0
#define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB
#endif
// RHPort number used for host can be defined by board.mk, default to port 0
#ifndef BOARD_TUH_RHPORT
#define BOARD_TUH_RHPORT 0
#endif
// RHPort max operational speed can defined by board.mk
#ifndef BOARD_TUH_MAX_SPEED
#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED
#endif
//--------------------------------------------------------------------
// COMMON CONFIGURATION
// Common Configuration
//--------------------------------------------------------------------
// defined by compiler flags for flexibility
@@ -67,12 +47,6 @@
#define CFG_TUSB_DEBUG 0
#endif
// Enable Host stack
#define CFG_TUH_ENABLED 1
// Default is max speed that hardware controller could support with on-chip PHY
#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED
/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
* Tinyusb use follows macros to declare transferring memory so that they can be put
* into those specific section.
@@ -85,11 +59,43 @@
#endif
#ifndef CFG_TUH_MEM_ALIGN
#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4)))
#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4)))
#endif
//--------------------------------------------------------------------
// CONFIGURATION
// Host Configuration
//--------------------------------------------------------------------
// Enable Host stack
#define CFG_TUH_ENABLED 1
#if CFG_TUSB_MCU == OPT_MCU_RP2040
// #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller
// #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller
// host roothub port is 1 if using either pio-usb or max3421
#if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)
#define BOARD_TUH_RHPORT 1
#endif
#endif
// Default is max speed that hardware controller could support with on-chip PHY
#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED
//------------------------- Board Specific --------------------------
// RHPort number used for host can be defined by board.mk, default to port 0
#ifndef BOARD_TUH_RHPORT
#define BOARD_TUH_RHPORT 0
#endif
// RHPort max operational speed can defined by board.mk
#ifndef BOARD_TUH_MAX_SPEED
#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED
#endif
//--------------------------------------------------------------------
// Driver Configuration
//--------------------------------------------------------------------
// Size of buffer to hold descriptors and other data used for enumeration

64
examples/host/cdc_msc_hid/src/tusb_config.h
View File

@@ -30,28 +30,8 @@
extern "C" {
#endif
//--------------------------------------------------------------------+
// Board Specific Configuration
//--------------------------------------------------------------------+
#if CFG_TUSB_MCU == OPT_MCU_RP2040
// change to 1 if using pico-pio-usb as host controller for raspberry rp2040
#define CFG_TUH_RPI_PIO_USB 0
#define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB
#endif
// RHPort number used for host can be defined by board.mk, default to port 0
#ifndef BOARD_TUH_RHPORT
#define BOARD_TUH_RHPORT 0
#endif
// RHPort max operational speed can defined by board.mk
#ifndef BOARD_TUH_MAX_SPEED
#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED
#endif
//--------------------------------------------------------------------
// COMMON CONFIGURATION
// Common Configuration
//--------------------------------------------------------------------
// defined by compiler flags for flexibility
@@ -67,12 +47,6 @@
#define CFG_TUSB_DEBUG 0
#endif
// Enable Host stack
#define CFG_TUH_ENABLED 1
// Default is max speed that hardware controller could support with on-chip PHY
#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED
/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
* Tinyusb use follows macros to declare transferring memory so that they can be put
* into those specific section.
@@ -85,11 +59,43 @@
#endif
#ifndef CFG_TUH_MEM_ALIGN
#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4)))
#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4)))
#endif
//--------------------------------------------------------------------
// CONFIGURATION
// Host Configuration
//--------------------------------------------------------------------
// Enable Host stack
#define CFG_TUH_ENABLED 1
#if CFG_TUSB_MCU == OPT_MCU_RP2040
// #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller
// #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller
// host roothub port is 1 if using either pio-usb or max3421
#if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)
#define BOARD_TUH_RHPORT 1
#endif
#endif
// Default is max speed that hardware controller could support with on-chip PHY
#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED
//------------------------- Board Specific --------------------------
// RHPort number used for host can be defined by board.mk, default to port 0
#ifndef BOARD_TUH_RHPORT
#define BOARD_TUH_RHPORT 0
#endif
// RHPort max operational speed can defined by board.mk
#ifndef BOARD_TUH_MAX_SPEED
#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED
#endif
//--------------------------------------------------------------------
// Driver Configuration
//--------------------------------------------------------------------
// Size of buffer to hold descriptors and other data used for enumeration

18
examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h
View File

@@ -105,6 +105,7 @@
#define configUSE_TICK_HOOK 0
#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning
#define configCHECK_FOR_STACK_OVERFLOW 2
#define configCHECK_HANDLER_INSTALLATION 0
/* Run time and task stats gathering related definitions. */
#define configGENERATE_RUN_TIME_STATS 0
@@ -139,23 +140,6 @@
#define INCLUDE_xEventGroupSetBitFromISR 0
#define INCLUDE_xTimerPendFunctionCall 0
/* Define to trap errors during development. */
// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
#define configASSERT(_exp) \
do {\
if ( !(_exp) ) { \
volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \
taskDISABLE_INTERRUPTS(); \
__asm("BKPT #0\n"); \
}\
}\
} while(0)
#else
#define configASSERT( x )
#endif
#ifdef __RX__
/* Renesas RX series */
#define vSoftwareInterruptISR INT_Excep_ICU_SWINT

64
examples/host/cdc_msc_hid_freertos/src/tusb_config.h
View File

@@ -30,28 +30,8 @@
extern "C" {
#endif
//--------------------------------------------------------------------+
// Board Specific Configuration
//--------------------------------------------------------------------+
#if CFG_TUSB_MCU == OPT_MCU_RP2040
// change to 1 if using pico-pio-usb as host controller for raspberry rp2040
#define CFG_TUH_RPI_PIO_USB 0
#define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB
#endif
// RHPort number used for host can be defined by board.mk, default to port 0
#ifndef BOARD_TUH_RHPORT
#define BOARD_TUH_RHPORT 0
#endif
// RHPort max operational speed can defined by board.mk
#ifndef BOARD_TUH_MAX_SPEED
#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED
#endif
//--------------------------------------------------------------------
// COMMON CONFIGURATION
// Common Configuration
//--------------------------------------------------------------------
// defined by compiler flags for flexibility
@@ -72,12 +52,6 @@
#define CFG_TUSB_DEBUG 0
#endif
// Enable Host stack
#define CFG_TUH_ENABLED 1
// Default is max speed that hardware controller could support with on-chip PHY
#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED
/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
* Tinyusb use follows macros to declare transferring memory so that they can be put
* into those specific section.
@@ -90,11 +64,43 @@
#endif
#ifndef CFG_TUH_MEM_ALIGN
#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4)))
#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4)))
#endif
//--------------------------------------------------------------------
// CONFIGURATION
// Host Configuration
//--------------------------------------------------------------------
// Enable Host stack
#define CFG_TUH_ENABLED 1
#if CFG_TUSB_MCU == OPT_MCU_RP2040
// #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller
// #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller
// host roothub port is 1 if using either pio-usb or max3421
#if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)
#define BOARD_TUH_RHPORT 1
#endif
#endif
// Default is max speed that hardware controller could support with on-chip PHY
#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED
//------------------------- Board Specific --------------------------
// RHPort number used for host can be defined by board.mk, default to port 0
#ifndef BOARD_TUH_RHPORT
#define BOARD_TUH_RHPORT 0
#endif
// RHPort max operational speed can defined by board.mk
#ifndef BOARD_TUH_MAX_SPEED
#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED
#endif
//--------------------------------------------------------------------
// Driver Configuration
//--------------------------------------------------------------------
// Size of buffer to hold descriptors and other data used for enumeration

64
examples/host/hid_controller/src/tusb_config.h
View File

@@ -30,28 +30,8 @@
extern "C" {
#endif
//--------------------------------------------------------------------+
// Board Specific Configuration
//--------------------------------------------------------------------+
#if CFG_TUSB_MCU == OPT_MCU_RP2040
// change to 1 if using pico-pio-usb as host controller for raspberry rp2040
#define CFG_TUH_RPI_PIO_USB 0
#define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB
#endif
// RHPort number used for host can be defined by board.mk, default to port 0
#ifndef BOARD_TUH_RHPORT
#define BOARD_TUH_RHPORT 0
#endif
// RHPort max operational speed can defined by board.mk
#ifndef BOARD_TUH_MAX_SPEED
#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED
#endif
//--------------------------------------------------------------------
// COMMON CONFIGURATION
// Common Configuration
//--------------------------------------------------------------------
// defined by compiler flags for flexibility
@@ -67,12 +47,6 @@
#define CFG_TUSB_DEBUG 0
#endif
// Enable Host stack
#define CFG_TUH_ENABLED 1
// Default is max speed that hardware controller could support with on-chip PHY
#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED
/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
* Tinyusb use follows macros to declare transferring memory so that they can be put
* into those specific section.
@@ -85,11 +59,43 @@
#endif
#ifndef CFG_TUH_MEM_ALIGN
#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4)))
#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4)))
#endif
//--------------------------------------------------------------------
// CONFIGURATION
// Host Configuration
//--------------------------------------------------------------------
// Enable Host stack
#define CFG_TUH_ENABLED 1
#if CFG_TUSB_MCU == OPT_MCU_RP2040
// #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller
// #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller
// host roothub port is 1 if using either pio-usb or max3421
#if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)
#define BOARD_TUH_RHPORT 1
#endif
#endif
// Default is max speed that hardware controller could support with on-chip PHY
#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED
//------------------------- Board Specific --------------------------
// RHPort number used for host can be defined by board.mk, default to port 0
#ifndef BOARD_TUH_RHPORT
#define BOARD_TUH_RHPORT 0
#endif
// RHPort max operational speed can defined by board.mk
#ifndef BOARD_TUH_MAX_SPEED
#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED
#endif
//--------------------------------------------------------------------
// Driver Configuration
//--------------------------------------------------------------------
// Size of buffer to hold descriptors and other data used for enumeration

65
examples/host/msc_file_explorer/src/tusb_config.h
View File

@@ -30,29 +30,8 @@
extern "C" {
#endif
//--------------------------------------------------------------------+
// Board Specific Configuration
//--------------------------------------------------------------------+
#if CFG_TUSB_MCU == OPT_MCU_RP2040
// change to 1 if using pico-pio-usb as host controller for raspberry rp2040
#define CFG_TUH_RPI_PIO_USB 0
#define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB
#endif
// RHPort number used for host can be defined by board.mk, default to port 0
#ifndef BOARD_TUH_RHPORT
#define BOARD_TUH_RHPORT 0
#endif
// RHPort max operational speed can defined by board.mk
#ifndef BOARD_TUH_MAX_SPEED
#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED
#endif
//--------------------------------------------------------------------
// COMMON CONFIGURATION
// Common Configuration
//--------------------------------------------------------------------
// defined by compiler flags for flexibility
@@ -68,12 +47,6 @@
#define CFG_TUSB_DEBUG 0
#endif
// Enable Host stack
#define CFG_TUH_ENABLED 1
// Default is max speed that hardware controller could support with on-chip PHY
#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED
/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
* Tinyusb use follows macros to declare transferring memory so that they can be put
* into those specific section.
@@ -86,11 +59,43 @@
#endif
#ifndef CFG_TUH_MEM_ALIGN
#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4)))
#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4)))
#endif
//--------------------------------------------------------------------
// CONFIGURATION
// Host Configuration
//--------------------------------------------------------------------
// Enable Host stack
#define CFG_TUH_ENABLED 1
#if CFG_TUSB_MCU == OPT_MCU_RP2040
// #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller
// #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller
// host roothub port is 1 if using either pio-usb or max3421
#if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)
#define BOARD_TUH_RHPORT 1
#endif
#endif
// Default is max speed that hardware controller could support with on-chip PHY
#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED
//------------------------- Board Specific --------------------------
// RHPort number used for host can be defined by board.mk, default to port 0
#ifndef BOARD_TUH_RHPORT
#define BOARD_TUH_RHPORT 0
#endif
// RHPort max operational speed can defined by board.mk
#ifndef BOARD_TUH_MAX_SPEED
#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED
#endif
//--------------------------------------------------------------------
// Driver Configuration
//--------------------------------------------------------------------
// Size of buffer to hold descriptors and other data used for enumeration