doxygen documenting
This commit is contained in:
		
							
								
								
									
										79
									
								
								tinyusb/doxygen/configuration.txt
									
									
									
									
									
										Normal file
									
								
							
							
						
						
									
										79
									
								
								tinyusb/doxygen/configuration.txt
									
									
									
									
									
										Normal file
									
								
							| @@ -0,0 +1,79 @@ | ||||
| /** \addtogroup group_configuration | ||||
|  *  @{ */ | ||||
|  | ||||
| //--------------------------------------------------------------------+ | ||||
| // COMMON CONFIGURATION | ||||
| //--------------------------------------------------------------------+ | ||||
|  | ||||
| /// \brief tell the stack which mode (host/device/otg) the usb controller0 will be operated on. Possible value is | ||||
| /// from \ref TUSB_MODE. Note the hardware usb controller must support the selected mode. | ||||
| #define TUSB_CFG_CONTROLLER_0_MODE | ||||
|  | ||||
| /** USB controller in MCU often has limited access to specific RAM section. The Stack will use this macro to place internal variables | ||||
|   into the USB RAM section as follows. if your mcu's usb controller has no such limit, define TUSB_CFG_ATTR_USBRAM as empty macro. | ||||
|  | ||||
|   @code | ||||
|   TUSB_CFG_ATTR_USBRAM uint8_t usb_xfer_buffer[10]; | ||||
|   @endcode | ||||
|  */ | ||||
| #define TUSB_CFG_ATTR_USBRAM | ||||
|  | ||||
| #define TUSB_CFG_MCU          ///< Select one of the supported MCU, the value must be from \ref group_mcu | ||||
| #define TUSB_CFG_OS           ///< Select one of the supported RTOS, the value must be from \ref group_supported_os. | ||||
| #define TUSB_CFG_OS_TASK_PRIO ///< If \ref TUSB_CFG_OS is configured to use a real RTOS (other than TUSB_OS_NONE). This determines the priority of the usb stack task. | ||||
| #define TUSB_CFG_TICKS_HZ     ///< The rate ticks in hert. This is used in conjunction with \ref tusb_tick_get to calculate timing. | ||||
|  | ||||
| //--------------------------------------------------------------------+ | ||||
| // HOST CONFIGURATION | ||||
| //--------------------------------------------------------------------+ | ||||
| /** \defgroup TUSB_CFG_HOST Host Options | ||||
|  *  @{ */ | ||||
|  | ||||
| /** \brief Maximum number of device host stack can manage | ||||
|  * \n If hub class is not enabled, set this equal to number of controllers in host mode | ||||
|  * \n If hub class is enabled, make sure hub is also counted */ | ||||
| #define TUSB_CFG_HOST_DEVICE_MAX | ||||
|  | ||||
| /// \brief Buffer size used for getting device configuration descriptor. You may want to increase this from default (256) | ||||
| /// to support lengthy composite device especially with Audio or Video class | ||||
| #define TUSB_CFG_HOST_ENUM_BUFFER_SIZE | ||||
|  | ||||
| /** \defgroup config_host_class Class Driver | ||||
|  * \brief For each Class Driver a value of 1 means enable, value of 0 mean disable | ||||
|  * @{ */ | ||||
| #define TUSB_CFG_HOST_HUB           ///< Enable Hub Class | ||||
| #define TUSB_CFG_HOST_HID_KEYBOARD  ///< Enable HID Class for Keyboard | ||||
| #define TUSB_CFG_HOST_HID_MOUSE     ///< Enable HID Class for Mouse | ||||
| #define TUSB_CFG_HOST_HID_GENERIC   ///< Enable HID Class for Generic (not supported yet) | ||||
| #define TUSB_CFG_HOST_MSC           ///< Enable Mass Storage Class (SCSI subclass only) | ||||
| #define TUSB_CFG_HOST_CDC           ///< Enable Virtual Serial (Communication Device Class) | ||||
| #define TUSB_CFG_HOST_CDC_RNDIS     ///< Enable Remote Network Device (require TUSB_CFG_HOST_CDC to be enabled) | ||||
| /** @} */ | ||||
|  | ||||
| /** @} */ // group Host | ||||
|  | ||||
| //--------------------------------------------------------------------+ | ||||
| // DEVICE CONFIGURATION | ||||
| //--------------------------------------------------------------------+ | ||||
| /** \defgroup TUSB_CFG_DEVICE Device Options | ||||
|  *  @{ */ | ||||
|  | ||||
| #define TUSB_CFG_DEVICE_CONTROL_ENDOINT_SIZE ///< Max packet size of Cotnrol Endpoint, default is 64 | ||||
|  | ||||
| /// Application MUST define this variable and initialize its pointers's member to all required USB descriptors including | ||||
| /// Device Descriptor, Configuration Descriptor, String Descriptors, HID Report Descriptors etc ... | ||||
| tusbd_descriptor_pointer_t tusbd_descriptor_pointers; | ||||
|  | ||||
| /** \defgroup config_device_class Class Driver | ||||
|  * \brief For each Class Driver a value of 1 means enable, value of 0 mean disable | ||||
|  * @{ */ | ||||
| #define TUSB_CFG_DEVICE_HID_KEYBOARD ///< Enable HID Class for Keyboard | ||||
| #define TUSB_CFG_DEVICE_HID_MOUSE 	 ///< Enable HID Class for Mouse | ||||
| #define TUSB_CFG_DEVICE_HID_GENERIC  ///< Enable HID Class for Generic (not supported yet) | ||||
| #define TUSB_CFG_DEVICE_MSC 				 ///< Enable Mass Storage Class (SCSI subclass only) | ||||
| #define TUSB_CFG_DEVICE_CDC 				 ///< Enable Virtual Serial (Communication Device Class) | ||||
| /** @} */ | ||||
|  | ||||
| /** @} */ // group Device | ||||
|  | ||||
| /** @} */ | ||||
		Reference in New Issue
	
	Block a user
	 hathach
					hathach