added Arduino Nano 33 BLE with/without Sense

hw/bsp/arduino_nano33_ble/board.mk

@@ -0,0 +1,63 @@
+CFLAGS += \
+  -flto \
+  -mthumb \
+  -mabi=aapcs \
+  -mcpu=cortex-m4 \
+  -mfloat-abi=hard \
+  -mfpu=fpv4-sp-d16 \
+  -DCFG_TUSB_MCU=OPT_MCU_NRF5X \
+  -DNRF52840_XXAA \
+  -DCONFIG_GPIO_AS_PINRESET
+
+# nrfx issue undef _ARMCC_VERSION usage https://github.com/NordicSemiconductor/nrfx/issues/49
+CFLAGS += -Wno-error=undef -Wno-error=unused-parameter
+
+# due to tusb_hal_nrf_power_event
+GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion)))
+ifeq ($(shell expr $(GCCVERSION) \>= 8), 1)
+CFLAGS += -Wno-error=cast-function-type
+endif
+
+# All source paths should be relative to the top level.
+#LD_FILE = hw/bsp/$(BOARD)/linker_script.ld
+LD_FILE = hw/bsp/$(BOARD)/arduino_nano33_ble.ld
+
+LDFLAGS += -L$(TOP)/hw/mcu/nordic/nrfx/mdk
+
+SRC_C += \
+  hw/mcu/nordic/nrfx/drivers/src/nrfx_power.c \
+  hw/mcu/nordic/nrfx/drivers/src/nrfx_uarte.c \
+  hw/mcu/nordic/nrfx/mdk/system_nrf52840.c
+
+INC += \
+  $(TOP)/lib/CMSIS_4/CMSIS/Include \
+  $(TOP)/hw/mcu/nordic \
+  $(TOP)/hw/mcu/nordic/nrfx \
+  $(TOP)/hw/mcu/nordic/nrfx/mdk \
+  $(TOP)/hw/mcu/nordic/nrfx/hal \
+  $(TOP)/hw/mcu/nordic/nrfx/drivers/include \
+  $(TOP)/hw/mcu/nordic/nrfx/drivers/src \
+
+SRC_S += hw/mcu/nordic/nrfx/mdk/gcc_startup_nrf52840.S
+
+ASFLAGS += -D__HEAP_SIZE=0
+
+# For TinyUSB port source
+VENDOR = nordic
+CHIP_FAMILY = nrf5x
+
+# For freeRTOS port source
+FREERTOS_PORT = ARM_CM4F
+
+# For flash-jlink target
+JLINK_DEVICE = nRF52840_xxAA
+JLINK_IF = swd
+
+# flash using bossac (as part of Nano33 BSP tools)
+# can be found in arduino15/packages/arduino/tools/bossac/
+# Add it to your PATH or change BOSSAC variable to match your installation
+BOSSAC = bossac
+
+flash: $(BUILD)/$(BOARD)-firmware.bin
+	@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
+	$(BOSSAC) --port=$(SERIAL) -U -i -e -w $^ -R