Enhance chipidea (#2075)

* update chipidea dcd, remove manual ep_count and use DCCPARAMS to get number of endpoint instead
* add dcd dcache for chipidea
* add cmake for lpc18
* add makefile build for mcx
* use fork of mcu sdk
* fix ci build with nrf
* flash rp2040 with openocd

hw/bsp/lpc18/boards/lpcxpresso18s37/board.cmake

@@ -0,0 +1,11 @@
+set(MCU_VARIANT LPC18S37)
+
+set(JLINK_DEVICE LPC18S37)
+set(PYOCD_TARGET LPC18S37)
+set(NXPLINK_DEVICE LPC18S37:LPCXPRESSO18S37)
+
+set(LD_FILE_gcc ${CMAKE_CURRENT_LIST_DIR}/lpc1837.ld)
+
+function(update_board TARGET)
+  # nothing to do
+endfunction()

hw/bsp/lpc18/boards/mcb1800/board.cmake

@@ -0,0 +1,11 @@
+set(MCU_VARIANT LPC1857)
+
+set(JLINK_DEVICE LPC1857)
+set(PYOCD_TARGET LPC1857)
+set(NXPLINK_DEVICE LPC1857:MCB1857)
+
+set(LD_FILE_gcc ${CMAKE_CURRENT_LIST_DIR}/lpc1857.ld)
+
+function(update_board TARGET)
+  # nothing to do
+endfunction()

hw/bsp/lpc18/family.cmake

@@ -0,0 +1,155 @@
+include_guard()
+
+if (NOT BOARD)
+  message(FATAL_ERROR "BOARD not specified")
+endif ()
+
+# TOP is path to root directory
+set(TOP "${CMAKE_CURRENT_LIST_DIR}/../../..")
+set(SDK_DIR ${TOP}/hw/mcu/nxp/lpcopen/lpc18xx/lpc_chip_18xx)
+
+# toolchain set up
+set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS LPC18XX CACHE INTERNAL "")
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+set(BOARD_TARGET board_${BOARD})
+if (NOT TARGET ${BOARD_TARGET})
+  add_library(${BOARD_TARGET} STATIC
+    ${SDK_DIR}/../gcc/cr_startup_lpc18xx.c
+    ${SDK_DIR}/src/chip_18xx_43xx.c
+    ${SDK_DIR}/src/clock_18xx_43xx.c
+    ${SDK_DIR}/src/gpio_18xx_43xx.c
+    ${SDK_DIR}/src/sysinit_18xx_43xx.c
+    ${SDK_DIR}/src/uart_18xx_43xx.c
+    )
+  target_compile_options(${BOARD_TARGET} PUBLIC
+    -nostdlib
+    )
+  target_compile_definitions(${BOARD_TARGET} PUBLIC
+    __USE_LPCOPEN
+    CORE_M3
+    )
+  target_include_directories(${BOARD_TARGET} PUBLIC
+    ${SDK_DIR}/inc
+    ${SDK_DIR}/inc/config_18xx
+    )
+  update_board(${BOARD_TARGET})
+
+  if (NOT DEFINED LD_FILE_${TOOLCHAIN})
+    MESSAGE(FATAL_ERROR "LD_FILE_${TOOLCHAIN} not defined")
+  endif ()
+
+  if (TOOLCHAIN STREQUAL "gcc")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_gcc}"
+      "LINKER:-Map=$<IF:$<BOOL:$<TARGET_PROPERTY:OUTPUT_NAME>>,$<TARGET_PROPERTY:OUTPUT_NAME>,$<TARGET_PROPERTY:NAME>>${CMAKE_EXECUTABLE_SUFFIX}.map"
+      # nanolib
+      --specs=nosys.specs
+      --specs=nano.specs
+      )
+  else ()
+    # TODO support IAR
+  endif ()
+endif () # BOARD_TARGET
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_target TARGET)
+  # set output name to .elf
+  set_target_properties(${TARGET} PROPERTIES OUTPUT_NAME ${TARGET}.elf)
+
+  # run size after build
+  add_custom_command(TARGET ${TARGET} POST_BUILD
+    COMMAND ${TOOLCHAIN_SIZE} $<TARGET_FILE:${TARGET}>
+    )
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # TinyUSB Port
+    ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c
+    ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c
+    ${TOP}/src/portable/ehci/ehci.c
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  #---------- TinyUSB ----------
+  # tinyusb target is built for each example since it depends on example's tusb_config.h
+  set(TINYUSB_TARGET_PREFIX ${TARGET}-)
+  add_library(${TARGET}-tinyusb_config INTERFACE)
+
+  target_include_directories(${TARGET}-tinyusb_config INTERFACE
+    ${CMAKE_CURRENT_SOURCE_DIR}/src
+    )
+  target_compile_definitions(${TARGET}-tinyusb_config INTERFACE
+    CFG_TUSB_MCU=OPT_MCU_LPC18XX
+    )
+
+  # tinyusb's CMakeList.txt
+  add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb)
+
+  # Link dependencies
+  target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}-tinyusb)
+
+  # group target (not yet supported by clion)
+  set_target_properties(${TARGET}-tinyusb ${TARGET}-tinyusb_config
+    PROPERTIES FOLDER ${TARGET}_sub
+    )
+
+  #---------- Flash ----------
+  family_flash_jlink(${TARGET})
+endfunction()
+
+
+function(family_add_freertos TARGET)
+  # freertos_config
+  add_subdirectory(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/FreeRTOSConfig ${CMAKE_CURRENT_BINARY_DIR}/freertos_config)
+
+  ## freertos
+  if (NOT TARGET freertos_kernel)
+    add_subdirectory(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../../lib/FreeRTOS-Kernel ${CMAKE_CURRENT_BINARY_DIR}/freertos_kernel)
+  endif ()
+
+  # Add FreeRTOS option to tinyusb_config
+  target_compile_definitions(${TARGET}-tinyusb_config INTERFACE
+    CFG_TUSB_OS=OPT_OS_FREERTOS
+    )
+  # link tinyusb with freeRTOS kernel
+  target_link_libraries(${TARGET}-tinyusb PUBLIC
+    freertos_kernel
+    )
+  target_link_libraries(${TARGET} PUBLIC
+    freertos_kernel
+    )
+endfunction()
+
+function(family_configure_device_example TARGET)
+  family_configure_target(${TARGET})
+endfunction()
+
+function(family_configure_host_example TARGET)
+  family_configure_target(${TARGET})
+endfunction()
+
+function(family_configure_dual_usb_example TARGET)
+  family_configure_target(${TARGET})
+endfunction()