andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

Merge pull request #1531 from pigrew/usbtmc_highspeed

Browse Source 
USBTMC: Fixes and support for high-speed USB
This commit is contained in:
Ha Thach
2022-07-18 22:20:43 +07:00
committed by GitHub
parent 868f2bcda0 54250d7dd5
commit 2110e27678
5 changed files with 137 additions and 59 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
src/class/usbtmc/usbtmc.h
View File

@@ -189,7 +189,10 @@ typedef enum {
USBTMC_STATUS_FAILED = 0x80,
USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS = 0x81,
USBTMC_STATUS_SPLIT_NOT_IN_PROGRESS = 0x82,
USBTMC_STATUS_SPLIT_IN_PROGRESS = 0x83
USBTMC_STATUS_SPLIT_IN_PROGRESS = 0x83,
/****** USBTMC 488 *************/
USB488_STATUS_INTERRUPT_IN_BUSY = 0x20
} usbtmc_status_enum;
/************************************************************

82
src/class/usbtmc/usbtmc_device.c
View File

@@ -64,7 +64,8 @@
// USBTMC 3.2.2 error conditions not strictly followed
// No local lock-out, REN, or GTL.
// Clear message available status byte at the correct time? (488 4.3.1.3)
// Ability to defer status byte transmission
// Transmission of status byte in response to USB488 SRQ condition
#include "tusb_option.h"
@@ -80,6 +81,11 @@
static char logMsg[150];
#endif
// Buffer size must be an exact multiple of the max packet size for both
// bulk (up to 64 bytes for FS, 512 bytes for HS). In addation, this driver
// imposes a minimum buffer size of 32 bytes.
#define USBTMCD_BUFFER_SIZE (TUD_OPT_HIGH_SPEED ? 512 : 64)
/*
* The state machine does not allow simultaneous reading and writing. This is
* consistent with USBTMC.
@@ -120,9 +126,12 @@ typedef struct
uint8_t ep_int_in;
// IN buffer is only used for first packet, not the remainder
// in order to deal with prepending header
CFG_TUSB_MEM_ALIGN uint8_t ep_bulk_in_buf[USBTMCD_MAX_PACKET_SIZE];
CFG_TUSB_MEM_ALIGN uint8_t ep_bulk_in_buf[USBTMCD_BUFFER_SIZE];
uint32_t ep_bulk_in_wMaxPacketSize;
// OUT buffer receives one packet at a time
CFG_TUSB_MEM_ALIGN uint8_t ep_bulk_out_buf[USBTMCD_MAX_PACKET_SIZE];
CFG_TUSB_MEM_ALIGN uint8_t ep_bulk_out_buf[USBTMCD_BUFFER_SIZE];
uint32_t ep_bulk_out_wMaxPacketSize;
uint32_t transfer_size_remaining; // also used for requested length for bulk IN.
uint32_t transfer_size_sent; // To keep track of data bytes that have been queued in FIFO (not header bytes)
@@ -139,11 +148,8 @@ CFG_TUSB_MEM_SECTION static usbtmc_interface_state_t usbtmc_state =
.itf_id = 0xFF,
};
// We need all headers to fit in a single packet in this implementation.
TU_VERIFY_STATIC(USBTMCD_MAX_PACKET_SIZE >= 32u,"USBTMC dev EP packet size too small");
TU_VERIFY_STATIC(
(sizeof(usbtmc_state.ep_bulk_in_buf) % USBTMCD_MAX_PACKET_SIZE) == 0,
"packet buffer must be a multiple of the packet size");
// We need all headers to fit in a single packet in this implementation, 32 bytes will fit all standard USBTMC headers
TU_VERIFY_STATIC(USBTMCD_BUFFER_SIZE >= 32u,"USBTMC dev buffer size too small");
static bool handle_devMsgOutStart(uint8_t rhport, void *data, size_t len);
static bool handle_devMsgOut(uint8_t rhport, void *data, size_t len, size_t packetLen);
@@ -151,7 +157,6 @@ static bool handle_devMsgOut(uint8_t rhport, void *data, size_t len, size_t pack
static uint8_t termChar;
static uint8_t termCharRequested = false;
osal_mutex_def_t usbtmcLockBuffer;
static osal_mutex_t usbtmcLock;
@@ -282,12 +287,15 @@ uint16_t usbtmcd_open_cb(uint8_t rhport, tusb_desc_interface_t const * itf_desc,
tusb_desc_endpoint_t const *ep_desc = (tusb_desc_endpoint_t const *)p_desc;
switch(ep_desc->bmAttributes.xfer) {
case TUSB_XFER_BULK:
TU_ASSERT(tu_edpt_packet_size(ep_desc) == USBTMCD_MAX_PACKET_SIZE, 0);
// Ensure buffer is an exact multiple of the maxPacketSize
TU_ASSERT((USBTMCD_BUFFER_SIZE % tu_edpt_packet_size(ep_desc)) == 0, 0);
if (tu_edpt_dir(ep_desc->bEndpointAddress) == TUSB_DIR_IN)
{
usbtmc_state.ep_bulk_in = ep_desc->bEndpointAddress;
usbtmc_state.ep_bulk_in_wMaxPacketSize = tu_edpt_packet_size(ep_desc);
} else {
usbtmc_state.ep_bulk_out = ep_desc->bEndpointAddress;
usbtmc_state.ep_bulk_out_wMaxPacketSize = tu_edpt_packet_size(ep_desc);
}
break;
@@ -395,7 +403,7 @@ static bool handle_devMsgOut(uint8_t rhport, void *data, size_t len, size_t pack
// return true upon failure, as we can assume error is being handled elsewhere.
TU_VERIFY(usbtmc_state.state == STATE_RCV,true);
bool shortPacket = (packetLen < USBTMCD_MAX_PACKET_SIZE);
bool shortPacket = (packetLen < usbtmc_state.ep_bulk_out_wMaxPacketSize);
// Packet is to be considered complete when we get enough data or at a short packet.
bool atEnd = false;
@@ -522,7 +530,7 @@ bool usbtmcd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint
break;
case STATE_TX_INITIATED:
if(usbtmc_state.transfer_size_remaining >=sizeof(usbtmc_state.ep_bulk_in_buf))
if(usbtmc_state.transfer_size_remaining >= sizeof(usbtmc_state.ep_bulk_in_buf))
{
// FIXME! This removes const below!
TU_VERIFY( usbd_edpt_xfer(rhport, usbtmc_state.ep_bulk_in,
@@ -539,7 +547,7 @@ bool usbtmcd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint
usbtmc_state.transfer_size_remaining = 0;
usbtmc_state.devInBuffer = NULL;
TU_VERIFY( usbd_edpt_xfer(rhport, usbtmc_state.ep_bulk_in, usbtmc_state.ep_bulk_in_buf, (uint16_t)packetLen) );
if(((packetLen % USBTMCD_MAX_PACKET_SIZE) != 0) || (packetLen == 0 ))
if(((packetLen % usbtmc_state.ep_bulk_in_wMaxPacketSize) != 0) || (packetLen == 0 ))
{
usbtmc_state.state = STATE_TX_SHORTED;
}
@@ -589,18 +597,31 @@ bool usbtmcd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request
{
uint32_t ep_addr = (request->wIndex);
// At this point, a transfer MAY be in progress. Based on USB spec, when clearing bulk EP HALT,
// the EP transfer buffer needs to be cleared and DTOG needs to be reset, even if
// the EP is not halted. The only USBD API interface to do this is to stall and then unstall the EP.
if(ep_addr == usbtmc_state.ep_bulk_out)
{
criticalEnter();
usbd_edpt_stall(rhport, (uint8_t)ep_addr);
usbd_edpt_clear_stall(rhport, (uint8_t)ep_addr);
usbtmc_state.state = STATE_NAK; // USBD core has placed EP in NAK state for us
criticalLeave();
tud_usbtmc_bulkOut_clearFeature_cb();
}
else if (ep_addr == usbtmc_state.ep_bulk_in)
{
usbd_edpt_stall(rhport, (uint8_t)ep_addr);
usbd_edpt_clear_stall(rhport, (uint8_t)ep_addr);
tud_usbtmc_bulkIn_clearFeature_cb();
}
else
else if ((usbtmc_state.ep_int_in != 0) && (ep_addr == usbtmc_state.ep_int_in))
{
// Clearing interrupt in EP
usbd_edpt_stall(rhport, (uint8_t)ep_addr);
usbd_edpt_clear_stall(rhport, (uint8_t)ep_addr);
}
else
{
return false;
}
@@ -680,7 +701,7 @@ bool usbtmcd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request
usbtmc_state.transfer_size_remaining = 0u;
// Check if we've queued a short packet
criticalEnter();
usbtmc_state.state = ((usbtmc_state.transfer_size_sent % USBTMCD_MAX_PACKET_SIZE) == 0) ?
usbtmc_state.state = ((usbtmc_state.transfer_size_sent % usbtmc_state.ep_bulk_in_wMaxPacketSize) == 0) ?
STATE_ABORTING_BULK_IN : STATE_ABORTING_BULK_IN_SHORTED;
criticalLeave();
if(usbtmc_state.transfer_size_sent == 0)
@@ -810,25 +831,32 @@ bool usbtmcd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request
bTag = request->wValue & 0x7F;
TU_VERIFY(request->bmRequestType == 0xA1);
TU_VERIFY((request->wValue & (~0x7F)) == 0u); // Other bits are required to be zero
TU_VERIFY((request->wValue & (~0x7F)) == 0u); // Other bits are required to be zero (USB488v1.0 Table 11)
TU_VERIFY(bTag >= 0x02 && bTag <= 127);
TU_VERIFY(request->wIndex == usbtmc_state.itf_id);
TU_VERIFY(request->wLength == 0x0003);
rsp.bTag = (uint8_t)bTag;
if(usbtmc_state.ep_int_in != 0)
{
rsp.USBTMC_status = USBTMC_STATUS_SUCCESS;
rsp.statusByte = 0x00; // Use interrupt endpoint, instead.
usbtmc_read_stb_interrupt_488_t intMsg =
rsp.statusByte = 0x00; // Use interrupt endpoint, instead. Must be 0x00 (USB488v1.0 4.3.1.2)
if(usbd_edpt_busy(rhport, usbtmc_state.ep_int_in))
{
.bNotify1 = {
.one = 1,
.bTag = bTag & 0x7Fu,
},
.StatusByte = tud_usbtmc_get_stb_cb(&(rsp.USBTMC_status))
};
usbd_edpt_xfer(rhport, usbtmc_state.ep_int_in, (void*)&intMsg, sizeof(intMsg));
rsp.USBTMC_status = USB488_STATUS_INTERRUPT_IN_BUSY;
}
else
{
rsp.USBTMC_status = USBTMC_STATUS_SUCCESS;
usbtmc_read_stb_interrupt_488_t intMsg =
{
.bNotify1 = {
.one = 1,
.bTag = bTag & 0x7Fu,
},
.StatusByte = tud_usbtmc_get_stb_cb(&(rsp.USBTMC_status))
};
// Must be queued before control request response sent (USB488v1.0 4.3.1.2)
usbd_edpt_xfer(rhport, usbtmc_state.ep_int_in, (void*)&intMsg, sizeof(intMsg));
}
}
else
{

4
src/class/usbtmc/usbtmc_device.h
View File

@@ -35,10 +35,6 @@
#define CFG_TUD_USBTMC_ENABLE_488 (1)
#endif
// USB spec says that full-speed must be 8,16,32, or 64.
// However, this driver implementation requires it to be >=32
#define USBTMCD_MAX_PACKET_SIZE (TUD_OPT_HIGH_SPEED ? 512 : 64)
/***********************************************
* Functions to be implemeted by the class implementation
*/