andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

add DEVICE_ROM_DRIVER_ADDR macro in hal to point to rom driver add

Browse Source 
add TUSB_ATTR_RAM_SECTION in tinyusb_config.h to abtract usb ram placement to application
remove power_api.h (mcu dependency)
This commit is contained in:
hathach
2013-01-18 11:49:51 +07:00
parent c16632da0b
commit 25f6cee73b
13 changed files with 45 additions and 111 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
tinyusb/class/cdc.c
View File

@@ -320,7 +320,7 @@ TUSB_Error_t tusb_cdc_configured(USBD_HANDLE_T hUsb)
fifo_init (&ffTX, qBuffer[0], CDC_BUFFER_SIZE, false, USB0_IRQn); // TODO USB1 TX is non-overwritable
fifo_init (&ffRX, qBuffer[1], CDC_BUFFER_SIZE, true, USB0_IRQn); // RX is overwritable
#else
#error No MCU defined" // TODO asbtract MCU
#error No MCU defined // TODO asbtract MCU
#endif
return tERROR_NONE;

3
tinyusb/device/dcd.c
View File

@@ -41,11 +41,10 @@
// TODO refractor later
#include "descriptors.h"
#include <cr_section_macros.h>
// TODO dcd abstract later
#define USB_ROM_SIZE (1024*2)
uint8_t usb_RomDriver_buffer[USB_ROM_SIZE] ATTR_ALIGNED(2048) __DATA(RAM2);
uint8_t usb_RomDriver_buffer[USB_ROM_SIZE] ATTR_ALIGNED(2048) TUSB_ATTR_RAM_SECTION;
USBD_HANDLE_T g_hUsb;
static volatile bool isConfigured = false;

5
tinyusb/device/dcd.h
View File

@@ -58,9 +58,8 @@
#include "common/common.h"
#ifdef DEVICE_ROMDRIVER
#include "romdriver/mw_usbd_rom_api.h"
#include "romdriver/power_api.h"
#define USBD_API ((*(ROM **)(0x1FFF1FF8))->pUSBD) // TODO HAL
#include "romdriver/mw_usbd_rom_api.h"
#define USBD_API ((USBD_API_T*) DEVICE_ROM_DRIVER_ADDR)
#endif

1
tinyusb/device/romdriver/mw_usbd_rom_api.h
View File

@@ -39,7 +39,6 @@
#include "mw_usbd_dfuuser.h"
#include "mw_usbd_hiduser.h"
#include "mw_usbd_cdcuser.h"
//#include "power_api.h"
/** \brief Main USBD API functions structure.
* \ingroup Group_USBD

88
tinyusb/device/romdriver/power_api.h
View File

@@ -1,88 +0,0 @@
/****************************************************************************
* $Id:: power_api.h 6249 2011-01-25 19:23:47Z usb01267 $
* Project: NXP LPC13Uxx software example
*
* Description:
* Power API Header File for NXP LPC13Uxx Device Series
*
****************************************************************************
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* products. This software is supplied "AS IS" without any warranties.
* NXP Semiconductors assumes no responsibility or liability for the
* use of the software, conveys no license or title under any patent,
* copyright, or mask work right to the product. NXP Semiconductors
* reserves the right to make changes in the software without
* notification. NXP Semiconductors also make no representation or
* warranty that such application will be suitable for the specified
* use without further testing or modification.
****************************************************************************/
#ifndef __LPC13UXX_POWER_API_H__
#define __LPC13UXX_POWER_API_H__
#ifdef __cplusplus
extern "C" {
#endif
#define PWRROMD_PRESENT
#define USBROMD_PRESENT
#ifdef USBROMD_PRESENT
#include "mw_usbd_rom_api.h"
#endif
typedef struct _PWRD {
void (*set_pll)(unsigned int cmd[], unsigned int resp[]);
void (*set_power)(unsigned int cmd[], unsigned int resp[]);
} PWRD;
typedef struct _ROM {
#ifdef USBROMD_PRESENT
const USBD_API_T * pUSBD;
#else
const unsigned p_usbd;
#endif /* USBROMD_PRESENT */
const unsigned p_clib;
const unsigned p_cand;
#ifdef PWRROMD_PRESENT
const PWRD * pPWRD;
#else
const unsigned p_pwrd;
#endif /* PWRROMD_PRESENT */
const unsigned p_dev1;
const unsigned p_dev2;
const unsigned p_dev3;
const unsigned p_dev4;
} ROM;
//PLL setup related definitions
#define CPU_FREQ_EQU 0 //main PLL freq must be equal to the specified
#define CPU_FREQ_LTE 1 //main PLL freq must be less than or equal the specified
#define CPU_FREQ_GTE 2 //main PLL freq must be greater than or equal the specified
#define CPU_FREQ_APPROX 3 //main PLL freq must be as close as possible the specified
#define PLL_CMD_SUCCESS 0 //PLL setup successfully found
#define PLL_INVALID_FREQ 1 //specified freq out of range (either input or output)
#define PLL_INVALID_MODE 2 //invalid mode (see above for valid) specified
#define PLL_FREQ_NOT_FOUND 3 //specified freq not found under specified conditions
#define PLL_NOT_LOCKED 4 //PLL not locked => no changes to the PLL setup
//power setup elated definitions
#define PARAM_DEFAULT 0 //default power settings (voltage regulator, flash interface)
#define PARAM_CPU_PERFORMANCE 1 //setup for maximum CPU performance (higher current, more computation)
#define PARAM_EFFICIENCY 2 //balanced setting (power vs CPU performance)
#define PARAM_LOW_CURRENT 3 //lowest active current, lowest CPU performance
#define PARAM_CMD_SUCCESS 0 //power setting successfully found
#define PARAM_INVALID_FREQ 1 //specified freq out of range (=0 or > 50 MHz)
#define PARAM_INVALID_MODE 2 //specified mode not valid (see above for valid)
#define MAX_CLOCK_KHZ_PARAM 50000
#ifdef __cplusplus
}
#endif
#endif /* __LPC13UXX_POWER_API_H__ */

3
tinyusb/hal/hal_lpc11uxx.h
View File

@@ -55,6 +55,9 @@
#define DEVICE_ROMDRIVER
#define DEVICE_ROM_REG_BASE LPC_USB_BASE
#define DEVICE_ROM_DRIVER_ADDR 0x1FFF1FF8
#ifdef __cplusplus
extern "C" {

1
tinyusb/hal/hal_lpc13uxx.h
View File

@@ -55,6 +55,7 @@
#define DEVICE_ROMDRIVER
#define DEVICE_ROM_REG_BASE LPC_USB_BASE
#define DEVICE_ROM_DRIVER_ADDR 0x1FFF1FF8
#ifdef __cplusplus
extern "C" {

7
tinyusb/hal/hal_lpc43xx.h
View File

@@ -60,17 +60,16 @@
#define DEVICE_ROMDRIVER
#define DEVICE_ROM_REG_BASE LPC_USB0_BASE // TODO USB1
#define DEVICE_ROM_DRIVER_ADDR 0x1040011C
static inline void hal_interrupt_enable()
{
// TODO support multiple controller later
NVIC_EnableIRQ(USB0_IRQn);
NVIC_EnableIRQ(USB0_IRQn); // TODO USB1
}
static inline void hal_interrupt_disable()
{
// TODO support multiple controller later
NVIC_DisableIRQ(USB0_IRQn);
NVIC_DisableIRQ(USB0_IRQn); // TODO USB1
}
#ifdef __cplusplus

14
tinyusb/tusb_option.h
View File

@@ -55,12 +55,13 @@
/// define this symbol will make tinyusb look for external configure file
#ifndef _TEST_ // TODO allow configurable name
#include "tusb_config.h"
#include "tusb_config.h"
#endif
/// 0: no debug infor 3: most debug infor provided
/// 0: no debug information 3: most debug information provided
#ifndef TUSB_CFG_DEBUG
#define TUSB_CFG_DEBUG 3
#define TUSB_CFG_DEBUG 3
#warning TUSB_CFG_DEBUG is not defined, default value is 3
#endif
/// Enable Host Support
@@ -69,6 +70,13 @@
/// Enable Device Support
//#define TUSB_CFG_DEVICE
/// USB RAM Section Placement, MCU's usb controller often has limited access to specific RAM region. This will be used to declare internal variables as follow:
/// uint8_t tinyusb_data[10] TUSB_ATTR_RAM_SECTION;
/// if your mcu's usb controller has no such limit, define TUSB_ATTR_RAM_SECTION as empty macro.
#ifndef TUSB_ATTR_RAM_SECTION
#error TUSB_ATTR_RAM_SECTION is not defined, needed to place data in accessible RAM for usb controller
#endif
#define DEVICE_CLASS_HID ( (defined TUSB_CFG_DEVICE_HID_KEYBOARD) || (defined TUSB_CFG_DEVICE_HID_MOUSE) )
#define HOST_EHCI