andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

add board lpclink2, able to run device stack without any problems

Browse Source
This commit is contained in:
hathach
2013-12-02 00:40:10 +07:00
parent 4b78578266
commit 2c8b8ea529
8 changed files with 381 additions and 58 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
demos/bsp/boards/board.h
View File

@@ -69,6 +69,7 @@
#define BOARD_LPCXPRESSO1769 7
#define BOARD_LPC4357USB 8
#define BOARD_LPCLINK2 9
//--------------------------------------------------------------------+
// PRINTF TARGET DEFINE
@@ -80,9 +81,7 @@
#define PRINTF(...) printf(__VA_ARGS__)
#if BOARD == 0
#error BOARD is not defined or supported yet
#elif BOARD == BOARD_NGX4330
#if BOARD == BOARD_NGX4330
#include "ngx/board_ngx4330.h"
#elif BOARD == BOARD_LPCXPRESSO1347
#include "lpcxpresso/board_lpcxpresso1347.h"
@@ -98,6 +97,8 @@
#include "lpcxpresso/board_lpcxpresso1769.h"
#elif BOARD == BOARD_LPC4357USB
#include "microbuilder/board_lpc4357usb.h"
#elif BOARD == BOARD_LPCLINK2
#include "lpcxpresso/board_lpclink2.h"
#else
#error BOARD is not defined or supported yet
#endif

9
demos/bsp/boards/embedded_artists/ea4357/board_ea4357.h
View File

@@ -36,12 +36,6 @@
*/
/**************************************************************************/
/** \file
* \brief TBD
*
* \note TBD
*/
/** \ingroup TBD
* \defgroup TBD
* \brief TBD
@@ -65,12 +59,13 @@
#include "../oem_base_board/pca9532.h" // LEDs
//#include "../oem_board/nand.h"
//#include "../oem_board/nand.h"a
//#define CFG_PRINTF_TARGET PRINTF_TARGET_SWO
#define CFG_PRINTF_TARGET PRINTF_TARGET_UART // FIXME keil's cmsis rtx does not work with UART (work with SWO)
// TODO clean up
/*=========================================================================
HARDWARE MAC ADDRESS
-----------------------------------------------------------------------*/

126
demos/bsp/boards/lpcxpresso/board_lpclink2.c Normal file
View File

@@ -0,0 +1,126 @@
/**************************************************************************/
/*!
@file board_lpclink2.c
@author hathach (tinyusb.org)
@section LICENSE
Software License Agreement (BSD License)
Copyright (c) 2013, hathach (tinyusb.org)
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holders nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This file is part of the tinyusb stack.
*/
/**************************************************************************/
#include "../board.h"
#if BOARD == BOARD_LPCLINK2
#define BOARD_UART_PORT LPC_USART0
#define BOARD_UART_PIN_PORT 0x0f
#define BOARD_UART_PIN_TX 10 // PF.10 : UART0_TXD
#define BOARD_UART_PIN_RX 11 // PF.11 : UART0_RXD
#define BOARD_MAX_LEDS 1
const static struct {
uint8_t port;
uint8_t pin;
}leds[BOARD_MAX_LEDS] = { {0, 8} };
void board_init(void)
{
CGU_Init();
#if TUSB_CFG_OS == TUSB_OS_NONE // TODO may move to main.c
SysTick_Config(CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE) / CFG_TICKS_PER_SECOND); // 1 msec tick timer
#endif
//------------- USB -------------//
//------------- LED -------------//
for (uint8_t i=0; i<BOARD_MAX_LEDS; i++)
{
scu_pinmux(leds[i].port, leds[i].pin, MD_PUP|MD_EZI|MD_ZI, FUNC0);
GPIO_SetDir(leds[i].port, BIT_(leds[i].pin), 1); // output
}
#if CFG_UART_ENABLE
//------------- UART -------------//
scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN, FUNC1);
scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN | MD_EZI | MD_ZI, FUNC1);
UART_CFG_Type UARTConfigStruct;
UART_ConfigStructInit(&UARTConfigStruct);
UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE;
UARTConfigStruct.Clock_Speed = 0;
UART_Init(BOARD_UART_PORT, &UARTConfigStruct);
UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit
#endif
}
//--------------------------------------------------------------------+
// LEDS
//--------------------------------------------------------------------+
void board_leds(uint32_t on_mask, uint32_t off_mask)
{
for (uint32_t i=0; i<BOARD_MAX_LEDS; i++)
{
if ( on_mask & BIT_(i))
{
GPIO_SetValue(leds[i].port, BIT_(leds[i].pin));
}else if ( off_mask & BIT_(i)) // on_mask take precedence over off_mask
{
GPIO_ClearValue(leds[i].port, BIT_(leds[i].pin));
}
}
}
//--------------------------------------------------------------------+
// UART
//--------------------------------------------------------------------+
#if CFG_UART_ENABLE
uint32_t board_uart_send(uint8_t *buffer, uint32_t length)
{
return UART_Send(BOARD_UART_PORT, buffer, length, BLOCKING);
}
uint32_t board_uart_recv(uint8_t *buffer, uint32_t length)
{
return UART_Receive(BOARD_UART_PORT, buffer, length, BLOCKING);
}
uint8_t board_uart_getchar(void)
{
return UART_ReceiveByte(BOARD_UART_PORT);
}
#endif
#endif

68
demos/bsp/boards/lpcxpresso/board_lpclink2.h Normal file
View File

@@ -0,0 +1,68 @@
/**************************************************************************/
/*!
@file board_lpclink2.h
@author hathach (tinyusb.org)
@section LICENSE
Software License Agreement (BSD License)
Copyright (c) 2013, hathach (tinyusb.org)
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holders nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This file is part of the tinyusb stack.
*/
/**************************************************************************/
/** \ingroup TBD
* \defgroup TBD
* \brief TBD
*
* @{
*/
#ifndef _TUSB_BOARD_LPCLINK2_H_
#define _TUSB_BOARD_LPCLINK2_H_
#ifdef __cplusplus
extern "C" {
#endif
#include "LPC43xx.h"
#include "lpc43xx_scu.h"
#include "lpc43xx_cgu.h"a
#include "lpc43xx_gpio.h"
#include "lpc43xx_uart.h"
#include "lpc43xx_i2c.h"
#define CFG_PRINTF_TARGET PRINTF_TARGET_UART
#ifdef __cplusplus
}
#endif
#endif /* _TUSB_BOARD_LPCLINK2_H_ */
/** @} */

2
demos/bsp/boards/ngx/board_ngx4330.c
View File

@@ -58,7 +58,7 @@ void board_init(void)
GPIO_SetDir (5, BIT_(6), 1); // GPIO5[6] is output
GPIO_SetValue (5, BIT_(6)); // GPIO5[6] output high
// Leds Init
//------------- LED -------------//
for (uint8_t i=0; i<BOARD_MAX_LEDS; i++)
{
scu_pinmux(leds[i].port, leds[i].pin, MD_PUP|MD_EZI|MD_ZI, FUNC0);