andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

Use types with explicit bit widths.

Browse Source
This commit is contained in:
Nathan Conrad
2019-09-11 20:33:47 -04:00
parent 7b93177890
commit 3326b9d008
1 changed files with 10 additions and 10 deletions
Download Patch File Download Diff File Expand all files Collapse all files

20
src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
View File

@@ -171,7 +171,7 @@ static xfer_ctl_t xfer_status[MAX_EP_COUNT][2];
static TU_ATTR_ALIGNED(4) uint32_t _setup_packet[6];
static ushort newDADDR; // Used to set the new device address during the CTR IRQ handler
static uint8_t newDADDR; // Used to set the new device address during the CTR IRQ handler
// EP Buffers assigned from end of memory location, to minimize their chance of crashing
// into the stack.
@@ -198,19 +198,19 @@ void dcd_init (uint8_t rhport)
/* The RM mentions to use a special ordering of PDWN and FRES, but this isn't done in HAL.
* Here, the RM is followed. */
for(uint i = 0; i<200; i++) // should be a few us
for(uint32_t i = 0; i<200; i++) // should be a few us
{
asm("NOP");
}
// Perform USB peripheral reset
USB->CNTR = USB_CNTR_FRES | USB_CNTR_PDWN;
for(uint i = 0; i<200; i++) // should be a few us
for(uint32_t i = 0; i<200; i++) // should be a few us
{
asm("NOP");
}
reg16_clear_bits(&USB->CNTR, USB_CNTR_PDWN);// Remove powerdown
// Wait startup time, for F042 and F070, this is <= 1 us.
for(uint i = 0; i<200; i++) // should be a few us
for(uint32_t i = 0; i<200; i++) // should be a few us
{
asm("NOP");
}
@@ -221,7 +221,7 @@ void dcd_init (uint8_t rhport)
reg16_clear_bits(&USB->ISTR, USB_ISTR_ALL_EVENTS); // Clear pending interrupts
// Reset endpoints to disabled
for(uint i=0; i<STFSDEV_EP_COUNT; i++)
for(uint32_t i=0; i<STFSDEV_EP_COUNT; i++)
{
// This doesn't clear all bits since some bits are "toggle", but does set the type to DISABLED.
PCD_GET_ENDPOINT(USB,i) = 0u;
@@ -229,7 +229,7 @@ void dcd_init (uint8_t rhport)
// Initialize the BTABLE for EP0 at this point (though setting up the EP0R is unneeded)
// This is actually not necessary, but helps debugging to start with a blank RAM area
for(uint i=0;i<(DCD_STM32_BTABLE_LENGTH>>1); i++)
for(uint32_t i=0;i<(DCD_STM32_BTABLE_LENGTH>>1); i++)
{
pma[PMA_STRIDE*(DCD_STM32_BTABLE_BASE + i)] = 0u;
}
@@ -332,7 +332,7 @@ static void dcd_handle_bus_reset(void)
USB->DADDR = 0u; // disable USB peripheral by clearing the EF flag
// Clear all EPREG (or maybe this is automatic? I'm not sure)
for(uint i=0; i<STFSDEV_EP_COUNT; i++)
for(uint32_t i=0; i<STFSDEV_EP_COUNT; i++)
{
PCD_GET_ENDPOINT(USB,i) = 0u;
}
@@ -722,7 +722,7 @@ void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr)
static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, size_t wNBytes)
{
uint32_t n = ((uint32_t)((uint32_t)wNBytes + 1U)) >> 1U;
uint i;
uint32_t i;
uint16_t temp1, temp2;
const uint8_t * srcVal;
@@ -760,8 +760,8 @@ static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, si
*/
static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, size_t wNBytes)
{
uint n = (uint32_t)wNBytes >> 1U;
uint i;
uint32_t n = (uint32_t)wNBytes >> 1U;
uint32_t i;
// The GCC optimizer will combine access to 32-bit sizes if we let it. Force
// it volatile so that it won't do that.
__IO const uint16_t *pdwVal;