andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

fix trailing space and new line

Browse Source 
temporarily disable codespell
This commit is contained in:
hathach
2023-03-17 16:12:49 +07:00
parent 2faad42cb1
commit 3623ba1884
581 changed files with 2553 additions and 2694 deletions
Download Patch File Download Diff File Expand all files Collapse all files

56
hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h
View File

@@ -15,7 +15,7 @@
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_HAL_CONF_H
@@ -30,9 +30,9 @@
/* ########################## Module Selection ############################## */
/**
* @brief This is the list of modules to be used in the HAL driver
* @brief This is the list of modules to be used in the HAL driver
*/
#define HAL_MODULE_ENABLED
#define HAL_MODULE_ENABLED
/* #define HAL_ADC_MODULE_ENABLED */
/* #define HAL_CAN_MODULE_ENABLED */
/* #define HAL_CRC_MODULE_ENABLED */
@@ -42,7 +42,7 @@
/* #define HAL_DMA_MODULE_ENABLED */
/* #define HAL_ETH_MODULE_ENABLED */
#define HAL_EXTI_MODULE_ENABLED
#define HAL_FLASH_MODULE_ENABLED
#define HAL_FLASH_MODULE_ENABLED
/* #define HAL_NAND_MODULE_ENABLED */
/* #define HAL_NOR_MODULE_ENABLED */
/* #define HAL_PCCARD_MODULE_ENABLED */
@@ -52,8 +52,8 @@
/* #define HAL_I2C_MODULE_ENABLED */
/* #define HAL_I2S_MODULE_ENABLED */
/* #define HAL_IWDG_MODULE_ENABLED */
#define HAL_PWR_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
/* #define HAL_RNG_MODULE_ENABLED */
/* #define HAL_RTC_MODULE_ENABLED */
/* #define HAL_SD_MODULE_ENABLED */
@@ -65,7 +65,7 @@
/* #define HAL_SMARTCARD_MODULE_ENABLED */
/* #define HAL_WWDG_MODULE_ENABLED */
#define HAL_CORTEX_MODULE_ENABLED
#define HAL_PCD_MODULE_ENABLED
#define HAL_PCD_MODULE_ENABLED
/* #define HAL_HCD_MODULE_ENABLED */
@@ -73,9 +73,9 @@
/**
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
* (when HSE is used as system clock source, directly or through the PLL).
*/
#if !defined (HSE_VALUE)
#if !defined (HSE_VALUE)
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
@@ -86,7 +86,7 @@
/**
* @brief Internal High Speed oscillator (HSI) value.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
* (when HSI is used as system clock source, directly or through the PLL).
*/
#if !defined (HSI_VALUE)
#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/
@@ -95,7 +95,7 @@
/**
* @brief Internal Low Speed oscillator (LSI) value.
*/
#if !defined (LSI_VALUE)
#if !defined (LSI_VALUE)
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
@@ -113,8 +113,8 @@
/**
* @brief External clock source for I2S peripheral
* This value is used by the I2S HAL module to compute the I2S clock source
* frequency, this source is inserted directly through I2S_CKIN pad.
* This value is used by the I2S HAL module to compute the I2S clock source
* frequency, this source is inserted directly through I2S_CKIN pad.
*/
#if !defined (EXTERNAL_CLOCK_VALUE)
#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the Internal oscillator in Hz*/
@@ -126,7 +126,7 @@
/* ########################### System Configuration ######################### */
/**
* @brief This is the HAL system configuration section
*/
*/
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
#define TICK_INT_PRIORITY 0x0FU /*!< tick interrupt priority */
#define USE_RTOS 0U
@@ -163,7 +163,7 @@
/* ########################## Assert Selection ############################## */
/**
* @brief Uncomment the line below to expanse the "assert_param" macro in the
* @brief Uncomment the line below to expanse the "assert_param" macro in the
* HAL drivers code
*/
/* #define USE_FULL_ASSERT 1U */
@@ -180,7 +180,7 @@
#define MAC_ADDR4 0U
#define MAC_ADDR5 0U
/* Definition of the Ethernet driver buffers size and count */
/* Definition of the Ethernet driver buffers size and count */
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
#define ETH_RXBUFNB 5U /* 5 Rx buffers of size ETH_RX_BUF_SIZE */
@@ -190,7 +190,7 @@
/* LAN8742A PHY Address*/
#define LAN8742A_PHY_ADDRESS 0x00U
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
#define PHY_RESET_DELAY 0x000000FFU
/* PHY Configuration delay */
#define PHY_CONFIG_DELAY 0x00000FFFU
@@ -202,7 +202,7 @@
#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */
#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
@@ -217,7 +217,7 @@
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
/* Section 4: Extended PHY Registers */
#define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */
@@ -228,7 +228,7 @@
#define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */
#define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */
/* ################## SPI peripheral configuration ########################## */
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
@@ -240,7 +240,7 @@
/* Includes ------------------------------------------------------------------*/
/**
* @brief Include module's header file
* @brief Include module's header file
*/
#ifdef HAL_RCC_MODULE_ENABLED
@@ -258,7 +258,7 @@
#ifdef HAL_DMA_MODULE_ENABLED
#include "stm32f2xx_hal_dma.h"
#endif /* HAL_DMA_MODULE_ENABLED */
#ifdef HAL_CORTEX_MODULE_ENABLED
#include "stm32f2xx_hal_cortex.h"
#endif /* HAL_CORTEX_MODULE_ENABLED */
@@ -276,7 +276,7 @@
#endif /* HAL_CRC_MODULE_ENABLED */
#ifdef HAL_CRYP_MODULE_ENABLED
#include "stm32f2xx_hal_cryp.h"
#include "stm32f2xx_hal_cryp.h"
#endif /* HAL_CRYP_MODULE_ENABLED */
#ifdef HAL_DAC_MODULE_ENABLED
@@ -294,7 +294,7 @@
#ifdef HAL_FLASH_MODULE_ENABLED
#include "stm32f2xx_hal_flash.h"
#endif /* HAL_FLASH_MODULE_ENABLED */
#ifdef HAL_SRAM_MODULE_ENABLED
#include "stm32f2xx_hal_sram.h"
#endif /* HAL_SRAM_MODULE_ENABLED */
@@ -309,7 +309,7 @@
#ifdef HAL_PCCARD_MODULE_ENABLED
#include "stm32f2xx_hal_pccard.h"
#endif /* HAL_PCCARD_MODULE_ENABLED */
#endif /* HAL_PCCARD_MODULE_ENABLED */
#ifdef HAL_HASH_MODULE_ENABLED
#include "stm32f2xx_hal_hash.h"
@@ -378,14 +378,14 @@
#ifdef HAL_HCD_MODULE_ENABLED
#include "stm32f2xx_hal_hcd.h"
#endif /* HAL_HCD_MODULE_ENABLED */
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
* @brief The assert_param macro is used for function's parameters check.
* @param expr: If expr is false, it calls assert_failed function
* which reports the name of the source file and the source
* line number of the call that failed.
* line number of the call that failed.
* If expr is true, it returns no value.
* @retval None
*/
@@ -402,6 +402,6 @@
#endif
#endif /* __STM32F2xx_HAL_CONF_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/