andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

fix trailing space and new line

Browse Source 
temporarily disable codespell
This commit is contained in:
hathach
2023-03-17 16:12:49 +07:00
parent 2faad42cb1
commit 3623ba1884
581 changed files with 2553 additions and 2694 deletions
Download Patch File Download Diff File Expand all files Collapse all files

49
hw/bsp/stm32l0/stm32l0xx_hal_conf.h
View File

@@ -2,22 +2,22 @@
******************************************************************************
* @file stm32l0xx_hal_conf.h
* @author MCD Application Team
* @brief HAL configuration template file.
* @brief HAL configuration template file.
* This file should be copied to the application folder and renamed
* to stm32l0xx_hal_conf.h.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L0xx_HAL_CONF_H
@@ -32,9 +32,9 @@
/* ########################## Module Selection ############################## */
/**
* @brief This is the list of modules to be used in the HAL driver
* @brief This is the list of modules to be used in the HAL driver
*/
#define HAL_MODULE_ENABLED
#define HAL_MODULE_ENABLED
/*#define HAL_ADC_MODULE_ENABLED */
/*#define HAL_COMP_MODULE_ENABLED */
/*#define HAL_CRC_MODULE_ENABLED */
@@ -69,9 +69,9 @@
/**
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
* (when HSE is used as system clock source, directly or through the PLL).
*/
#if !defined (HSE_VALUE)
#if !defined (HSE_VALUE)
#define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
@@ -90,7 +90,7 @@
/**
* @brief Internal High Speed oscillator (HSI) value.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
* (when HSI is used as system clock source, directly or through the PLL).
*/
#if !defined (HSI_VALUE)
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
@@ -99,7 +99,7 @@
/**
* @brief Internal High Speed oscillator for USB (HSI48) value.
*/
#if !defined (HSI48_VALUE)
#if !defined (HSI48_VALUE)
#define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz.
The real value may vary depending on the variations
in voltage and temperature. */
@@ -108,7 +108,7 @@
/**
* @brief Internal Low Speed oscillator (LSI) value.
*/
#if !defined (LSI_VALUE)
#if !defined (LSI_VALUE)
#define LSI_VALUE ((uint32_t)37000U) /*!< LSI Typical Value in Hz*/
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
@@ -128,24 +128,24 @@
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */
/* Tip: To avoid modifying this file each time you need to use different HSE,
=== you can define the HSE value in your toolchain compiler preprocessor. */
/* ########################### System Configuration ######################### */
/**
* @brief This is the HAL system configuration section
*/
*/
#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
#define TICK_INT_PRIORITY (((uint32_t)1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority */
#define USE_RTOS 0U
#define PREFETCH_ENABLE 1U
#define TICK_INT_PRIORITY (((uint32_t)1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority */
#define USE_RTOS 0U
#define PREFETCH_ENABLE 1U
#define PREREAD_ENABLE 0U
#define BUFFER_CACHE_DISABLE 0U
/* ########################## Assert Selection ############################## */
/**
* @brief Uncomment the line below to expanse the "assert_param" macro in the
* @brief Uncomment the line below to expanse the "assert_param" macro in the
* HAL drivers code
*/
/* #define USE_FULL_ASSERT 1U */
@@ -191,13 +191,13 @@
/* Includes ------------------------------------------------------------------*/
/**
* @brief Include module's header file
* @brief Include module's header file
*/
#ifdef HAL_RCC_MODULE_ENABLED
#include "stm32l0xx_hal_rcc.h"
#endif /* HAL_RCC_MODULE_ENABLED */
#ifdef HAL_GPIO_MODULE_ENABLED
#include "stm32l0xx_hal_gpio.h"
#endif /* HAL_GPIO_MODULE_ENABLED */
@@ -233,11 +233,11 @@
#ifdef HAL_FIREWALL_MODULE_ENABLED
#include "stm32l0xx_hal_firewall.h"
#endif /* HAL_FIREWALL_MODULE_ENABLED */
#ifdef HAL_FLASH_MODULE_ENABLED
#include "stm32l0xx_hal_flash.h"
#endif /* HAL_FLASH_MODULE_ENABLED */
#ifdef HAL_I2C_MODULE_ENABLED
#include "stm32l0xx_hal_i2c.h"
#endif /* HAL_I2C_MODULE_ENABLED */
@@ -257,7 +257,7 @@
#ifdef HAL_LPTIM_MODULE_ENABLED
#include "stm32l0xx_hal_lptim.h"
#endif /* HAL_LPTIM_MODULE_ENABLED */
#ifdef HAL_PWR_MODULE_ENABLED
#include "stm32l0xx_hal_pwr.h"
#endif /* HAL_PWR_MODULE_ENABLED */
@@ -316,7 +316,7 @@
* @brief The assert_param macro is used for function's parameters check.
* @param expr If expr is false, it calls assert_failed function
* which reports the name of the source file and the source
* line number of the call that failed.
* line number of the call that failed.
* If expr is true, it returns no value.
* @retval None
*/
@@ -332,7 +332,6 @@
#endif
#endif /* __STM32L0xx_HAL_CONF_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/