fix trailing space and new line

temporarily disable codespell

src/portable/nxp/khci/dcd_khci.c

@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2020 Koji Kitayama
@@ -296,7 +296,7 @@ void dcd_int_disable(uint8_t rhport)
 
 void dcd_set_address(uint8_t rhport, uint8_t dev_addr)
 {
-  _dcd.addr = dev_addr & 0x7F; 
+  _dcd.addr = dev_addr & 0x7F;
   /* Response with status first before changing device address */
   dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0);
 }
@@ -528,7 +528,7 @@ void dcd_int_handler(uint8_t rhport)
   if (is & USB_ISTAT_SLEEP_MASK) {
     // TU_LOG2("Suspend: "); TU_LOG2_HEX(is);
 
-    // Note Host usually has extra delay after bus reset (without SOF), which could falsely 
+    // Note Host usually has extra delay after bus reset (without SOF), which could falsely
     // detected as Sleep event. Though usbd has debouncing logic so we are good
     KHCI->ISTAT = USB_ISTAT_SLEEP_MASK;
     process_bus_sleep(rhport);

src/portable/nxp/khci/hcd_khci.c

@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2021 Koji Kitayama
@@ -414,7 +414,7 @@ void hcd_int_disable(uint8_t rhport)
 uint32_t hcd_frame_number(uint8_t rhport)
 {
   (void)rhport;
-  /* The device must be reset at least once after connection 
+  /* The device must be reset at least once after connection
    * in order to start the frame counter. */
   if (_hcd.need_reset) hcd_port_reset(rhport);
   uint32_t frmnum = KHCI->FRMNUML;

src/portable/nxp/lpc17_40/dcd_lpc17_40.c

@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019 Ha Thach (tinyusb.org)

src/portable/nxp/lpc17_40/dcd_lpc17_40.h

@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019 Ha Thach (tinyusb.org)

src/portable/nxp/lpc17_40/hcd_lpc17_40.c

@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019, Ha Thach (tinyusb.org)
@@ -44,4 +44,3 @@ void hcd_int_disable(uint8_t rhport)
 }
 
 #endif
-

src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c

@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019 Ha Thach (tinyusb.org)
@@ -373,7 +373,7 @@ void dcd_edpt_close_all (uint8_t rhport)
 void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr)
 {
   (void) rhport;
-  
+
   uint8_t ep_id = ep_addr2id(ep_addr);
   _dcd.ep[ep_id][0].cmd_sts.active = _dcd.ep[ep_id][0].cmd_sts.active = 0; // TODO proper way is to EPSKIP then wait ep[][].active then write ep[][].disable (see table 778 in LPC55S69 Use Manual)
   _dcd.ep[ep_id][0].cmd_sts.disable = _dcd.ep[ep_id][1].cmd_sts.disable = 1;
@@ -426,7 +426,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to
 static void bus_reset(uint8_t rhport)
 {
   tu_memclr(&_dcd, sizeof(dcd_data_t));
-  edpt_reset_all(rhport); 
+  edpt_reset_all(rhport);
 
   // disable all endpoints as specified by LPC55S69 UM Table 778
   for(uint8_t ep_id = 0; ep_id < 2*MAX_EP_PAIRS; ep_id++)
@@ -575,4 +575,3 @@ void dcd_int_handler(uint8_t rhport)
 }
 
 #endif
-

src/portable/nxp/transdimension/common_transdimension.h

@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2021, Ha Thach (tinyusb.org)

src/portable/nxp/transdimension/dcd_transdimension.c

@@ -569,7 +569,7 @@ static void process_edpt_complete_isr(uint8_t rhport, uint8_t epnum, uint8_t dir
       tu_fifo_advance_write_pointer(p_qhd->ff, xferred_bytes);
     }
   }
-  
+
   // only number of bytes in the IOC qtd
   dcd_event_xfer_complete(rhport, tu_edpt_addr(epnum, dir), xferred_bytes, result, true);
 }

src/portable/nxp/transdimension/hcd_transdimension.c

@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019 Ha Thach (tinyusb.org)