andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

Rename directories to indicate that FT930 and FT900 devices are both covered by the same SDK and src/portable code. Board makefile includes __FT900__ macro for FT90x and __FT930__ macro for boards with FT93x.

Browse Source
This commit is contained in:
Gordon McNab
2021-10-06 16:50:55 +01:00
parent bcecbfdc29
commit 37c5eeb51d
6 changed files with 14 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
hw/bsp/brtmm90x/family.c
View File

@@ -28,7 +28,6 @@
#include <ft900.h>
#include "bsp/board.h"
#include "board.h"
//#include "src/device/dcd.h"
#if TUSB_OPT_DEVICE_ENABLED
int8_t board_ft90x_vbus(void); // Board specific implementation of VBUS detection for USB device.
@@ -67,16 +66,17 @@ void board_init(void)
#if 1
gpio_function(GPIO_ETH_LED0, pad_gpio4); /* ETH LED0 */
gpio_dir(GPIO_ETH_LED0, pad_dir_open_drain);
gpio_function(GPIO_ETH_LED1, pad_gpio5); /* ETH LED0 */
gpio_function(GPIO_ETH_LED1, pad_gpio5); /* ETH LED1 */
gpio_dir(GPIO_ETH_LED1, pad_dir_output);
#endif
sys_enable(sys_device_timer_wdt);
interrupt_attach(interrupt_timers, (int8_t)interrupt_timers, timer_ISR);
/* Timer A = 1ms */
timer_prescaler(timer_select_a, 1000);
timer_init(timer_select_a, 100, timer_direction_down, timer_prescaler_select_on, timer_mode_continuous);
timer_enable_interrupt(timer_select_a);
timer_start(timer_select_a);
interrupt_attach(interrupt_timers, (int8_t)interrupt_timers, timer_ISR);
// Setup VBUS detect GPIO. If the device is connected then this
// will set the MASK_SYS_PMCFG_DEV_DETECT_EN bit in PMCFG.

14
hw/bsp/brtmm90x/family.mk
View File

@@ -1,10 +1,10 @@
CROSS_COMPILE = ft32-elf-
DEPS_SUBMODULES += hw/mcu/bridgetek/ft90x/hardware
DEPS_SUBMODULES += hw/mcu/bridgetek/ft9xx/hardware
SKIP_NANOLIB = 1
# This is installed at "C:/Program Files(x86)/Bridgetek/FT9xx Toolchain/Toolchain/hardware"
FT90X_SDK = $(TOP)/hw/mcu/bridgetek/ft90x/hardware
FT9XX_SDK = $(TOP)/hw/mcu/bridgetek/ft9xx/hardware
CFLAGS += \
-D__FT900__ \
@@ -19,17 +19,17 @@ CFLAGS += -Wno-error=shadow
CFLAGS:=$(filter-out -Wcast-function-type,$(CFLAGS))
# All source paths should be relative to the top level.
LDINC += $(FT90X_SDK)/lib/Release
LDINC += $(FT9XX_SDK)/lib/Release
LIBS += -lft900
LD_FILE = hw/mcu/bridgetek/ft90x/hardware/scripts/ldscript.ld
LD_FILE = hw/mcu/bridgetek/ft9xx/hardware/scripts/ldscript.ld
LDFLAGS += $(addprefix -L,$(LDINC)) \
-Xlinker --entry=_start \
-Wl,-lc
SRC_C += src/portable/bridgetek/ft90x/dcd_ft90x.c
SRC_C += src/portable/bridgetek/ft9xx/dcd_ft9xx.c
#SRC_S += hw/mcu/bridgetek/ft90x/hardware/scripts/crt0.S
#SRC_S += hw/mcu/bridgetek/ft9xx/hardware/scripts/crt0.S
INC += \
$(FT90X_SDK)/include \
$(FT9XX_SDK)/include \
$(TOP)/$(BOARD_PATH)