andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

start to support

Browse Source 
- usbd host
- osal

some global define
#define TUSB_CFG_HOST_CONTROLLER_NUM
#define TUSB_CFG_HOST_DEVICE_MAX
#define TUSB_CFG_CONFIGURATION_MAX

rename & refractor HID type structure & enum

use CException to test asssertion library
add test for hid_host_keyboard with usbd configure get & osal queue get stubs
update test for assertion library
refractor ASSERT_STATUS in assertion library
update tusb_error_t values
rename usb basic type & enum in tusb_types.h and std_descriptors.h
This commit is contained in:
hathach
2013-01-22 17:41:06 +07:00
parent cfe7a3d23b
commit 38ce3f7534
25 changed files with 955 additions and 176 deletions
Download Patch File Download Diff File Expand all files Collapse all files

17
tinyusb/core/std_descriptors.h
View File

@@ -72,7 +72,7 @@ typedef ATTR_PREPACKED struct ATTR_PACKED {
uint8_t iProduct ; ///< Index of string descriptor describing product.
uint8_t iSerialNumber ; ///< Index of string descriptor describing the device's serial number.
uint8_t bNumConfigurations ; ///< Number of possible configurations.
} USB_Descriptor_Device_t;
} tusb_descriptor_device_t;
/// USB Standard Configuration Descriptor (section 9.6.1 table 9-10) */
typedef ATTR_PREPACKED struct ATTR_PACKED {
@@ -84,7 +84,7 @@ typedef ATTR_PREPACKED struct ATTR_PACKED {
uint8_t iConfiguration ; ///< Index of string descriptor describing this configuration
uint8_t bmAttributes ; ///< Configuration characteristics \n D7: Reserved (set to one)\n D6: Self-powered \n D5: Remote Wakeup \n D4...0: Reserved (reset to zero) \n D7 is reserved and must be set to one for historical reasons. \n A device configuration that uses power from the bus and a local source reports a non-zero value in bMaxPower to indicate the amount of bus power required and sets D6. The actual power source at runtime may be determined using the GetStatus(DEVICE) request (see USB 2.0 spec Section 9.4.5). \n If a device configuration supports remote wakeup, D5 is set to one.
uint8_t bMaxPower ; ///< Maximum power consumption of the USB device from the bus in this specific configuration when the device is fully operational. Expressed in 2 mA units (i.e., 50 = 100 mA).
} USB_Descriptor_Configuration_t;
} tusb_descriptor_configuration_t;
/// USB Standard Interface Descriptor (section 9.6.1 table 9-12)
typedef ATTR_PREPACKED struct ATTR_PACKED {
@@ -97,7 +97,7 @@ typedef ATTR_PREPACKED struct ATTR_PACKED {
uint8_t bInterfaceSubClass ; ///< Subclass code (assigned by the USB-IF). \n These codes are qualified by the value of the bInterfaceClass field. \li If the bInterfaceClass field is reset to zero, this field must also be reset to zero. \li If the bInterfaceClass field is not set to FFH, all values are reserved for assignment by the USB-IF.
uint8_t bInterfaceProtocol ; ///< Protocol code (assigned by the USB). \n These codes are qualified by the value of the bInterfaceClass and the bInterfaceSubClass fields. If an interface supports class-specific requests, this code identifies the protocols that the device uses as defined by the specification of the device class. \li If this field is reset to zero, the device does not use a class-specific protocol on this interface. \li If this field is set to FFH, the device uses a vendor-specific protocol for this interface.
uint8_t iInterface ; ///< Index of string descriptor describing this interface
}USB_Descriptor_Interface_t;
} tusb_descriptor_interface_t;
/// USB Standard Endpoint Descriptor (section 9.6.1 table 9-13)
typedef ATTR_PREPACKED struct ATTR_PACKED {
@@ -107,7 +107,7 @@ typedef ATTR_PREPACKED struct ATTR_PACKED {
uint8_t bmAttributes ; ///< This field describes the endpoint's attributes when it is configured using the bConfigurationValue. \n Bits 1..0: Transfer Type \n- 00 = Control \n- 01 = Isochronous \n- 10 = Bulk \n- 11 = Interrupt \n If not an isochronous endpoint, bits 5..2 are reserved and must be set to zero. If isochronous, they are defined as follows: \n Bits 3..2: Synchronization Type \n- 00 = No Synchronization \n- 01 = Asynchronous \n- 10 = Adaptive \n- 11 = Synchronous \n Bits 5..4: Usage Type \n- 00 = Data endpoint \n- 01 = Feedback endpoint \n- 10 = Implicit feedback Data endpoint \n- 11 = Reserved \n Refer to Chapter 5 of USB 2.0 specification for more information. \n All other bits are reserved and must be reset to zero. Reserved bits must be ignored by the host.
uint16_t wMaxPacketSize ; ///< Maximum packet size this endpoint is capable of sending or receiving when this configuration is selected. \n For isochronous endpoints, this value is used to reserve the bus time in the schedule, required for the per-(micro)frame data payloads. The pipe may, on an ongoing basis, actually use less bandwidth than that reserved. The device reports, if necessary, the actual bandwidth used via its normal, non-USB defined mechanisms. \n For all endpoints, bits 10..0 specify the maximum packet size (in bytes). \n For high-speed isochronous and interrupt endpoints: \n Bits 12..11 specify the number of additional transaction opportunities per microframe: \n- 00 = None (1 transaction per microframe) \n- 01 = 1 additional (2 per microframe) \n- 10 = 2 additional (3 per microframe) \n- 11 = Reserved \n Bits 15..13 are reserved and must be set to zero.
uint8_t bInterval ; ///< Interval for polling endpoint for data transfers. Expressed in frames or microframes depending on the device operating speed (i.e., either 1 millisecond or 125 us units). \n- For full-/high-speed isochronous endpoints, this value must be in the range from 1 to 16. The bInterval value is used as the exponent for a \f$ 2^(bInterval-1) \f$ value; e.g., a bInterval of 4 means a period of 8 (\f$ 2^(4-1) \f$). \n- For full-/low-speed interrupt endpoints, the value of this field may be from 1 to 255. \n- For high-speed interrupt endpoints, the bInterval value is used as the exponent for a \f$ 2^(bInterval-1) \f$ value; e.g., a bInterval of 4 means a period of 8 (\f$ 2^(4-1) \f$) . This value must be from 1 to 16. \n- For high-speed bulk/control OUT endpoints, the bInterval must specify the maximum NAK rate of the endpoint. A value of 0 indicates the endpoint never NAKs. Other values indicate at most 1 NAK each bInterval number of microframes. This value must be in the range from 0 to 255. \n Refer to Chapter 5 of USB 2.0 specification for more information.
} USB_Descriptor_Endpoint_t;
} tusb_descriptor_endpoint_t;
/// USB Other Speed Configuration Descriptor (section 9.6.1 table 9-11)
typedef ATTR_PREPACKED struct ATTR_PACKED {
@@ -119,7 +119,7 @@ typedef ATTR_PREPACKED struct ATTR_PACKED {
uint8_t IConfiguration ; ///< Index of string descriptor
uint8_t bmAttributes ; ///< Same as Configuration descriptor
uint8_t bMaxPower ; ///< Same as Configuration descriptor
} USB_Descriptor_OtherSpeed_t;
} tusb_descriptor_other_speed_t;
/// USB Device Qualifier Descriptor (section 9.6.1 table 9-9)
typedef ATTR_PREPACKED struct ATTR_PACKED {
@@ -132,7 +132,7 @@ typedef ATTR_PREPACKED struct ATTR_PACKED {
uint8_t bMaxPacketSize0 ; ///< Maximum packet size for other speed
uint8_t bNumConfigurations ; ///< Number of Other-speed Configurations
uint8_t bReserved ; ///< Reserved for future use, must be zero
} USB_Descriptor_DeviceQualifier_t;
} tusb_descriptor_device_qualifier_t;
/// USB Interface Association Descriptor (IAD ECN)
typedef ATTR_PREPACKED struct ATTR_PACKED
@@ -148,14 +148,15 @@ typedef ATTR_PREPACKED struct ATTR_PACKED
uint8_t bFunctionProtocol ; ///< Interface protocol ID.
uint8_t iFunction ; ///< Index of the string descriptor describing the interface association.
} USB_Descriptor_InterfaceAssociation_t;
} tusb_descriptor_interface_association_t;
/// USB Header Descriptor
typedef ATTR_PREPACKED struct ATTR_PACKED
{
uint8_t bLength ; ///< Size of this descriptor in bytes
uint8_t bDescriptorType ; ///< Descriptor Type
} USB_Descriptor_Header_t;
} tusb_descriptor_header_t;
#ifdef __cplusplus
}