andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

add field to endpoint maxpacketsize (mult)

Browse Source 
refractor hidh_open_subtask & hidh_keyboard_open
add ATTR_PACKED_STRUCT(x)
- TODO remove ugly pre_pack & post pack
This commit is contained in:
hathach
2013-03-26 13:07:42 +07:00
parent 03d045ecde
commit 3c767e9f44
6 changed files with 114 additions and 106 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
tinyusb/core/std_descriptors.h
View File

@@ -117,7 +117,12 @@ typedef ATTR_PREPACKED struct ATTR_PACKED {
uint8_t : 2;
} bmAttributes ; ///< This field describes the endpoint's attributes when it is configured using the bConfigurationValue. \n Bits 1..0: Transfer Type \n- 00 = Control \n- 01 = Isochronous \n- 10 = Bulk \n- 11 = Interrupt \n If not an isochronous endpoint, bits 5..2 are reserved and must be set to zero. If isochronous, they are defined as follows: \n Bits 3..2: Synchronization Type \n- 00 = No Synchronization \n- 01 = Asynchronous \n- 10 = Adaptive \n- 11 = Synchronous \n Bits 5..4: Usage Type \n- 00 = Data endpoint \n- 01 = Feedback endpoint \n- 10 = Implicit feedback Data endpoint \n- 11 = Reserved \n Refer to Chapter 5 of USB 2.0 specification for more information. \n All other bits are reserved and must be reset to zero. Reserved bits must be ignored by the host.
uint16_t wMaxPacketSize ; ///< Maximum packet size this endpoint is capable of sending or receiving when this configuration is selected. \n For isochronous endpoints, this value is used to reserve the bus time in the schedule, required for the per-(micro)frame data payloads. The pipe may, on an ongoing basis, actually use less bandwidth than that reserved. The device reports, if necessary, the actual bandwidth used via its normal, non-USB defined mechanisms. \n For all endpoints, bits 10..0 specify the maximum packet size (in bytes). \n For high-speed isochronous and interrupt endpoints: \n Bits 12..11 specify the number of additional transaction opportunities per microframe: \n- 00 = None (1 transaction per microframe) \n- 01 = 1 additional (2 per microframe) \n- 10 = 2 additional (3 per microframe) \n- 11 = Reserved \n Bits 15..13 are reserved and must be set to zero.
ATTR_PACKED_STRUCT(struct) {
uint16_t size : 11; ///< Maximum packet size this endpoint is capable of sending or receiving when this configuration is selected. \n For isochronous endpoints, this value is used to reserve the bus time in the schedule, required for the per-(micro)frame data payloads. The pipe may, on an ongoing basis, actually use less bandwidth than that reserved. The device reports, if necessary, the actual bandwidth used via its normal, non-USB defined mechanisms. \n For all endpoints, bits 10..0 specify the maximum packet size (in bytes). \n For high-speed isochronous and interrupt endpoints: \n Bits 12..11 specify the number of additional transaction opportunities per microframe: \n- 00 = None (1 transaction per microframe) \n- 01 = 1 additional (2 per microframe) \n- 10 = 2 additional (3 per microframe) \n- 11 = Reserved \n Bits 15..13 are reserved and must be set to zero.
uint16_t hs_period_mult : 2;
uint16_t : 0;
}wMaxPacketSize;
uint8_t bInterval ; ///< Interval for polling endpoint for data transfers. Expressed in frames or microframes depending on the device operating speed (i.e., either 1 millisecond or 125 us units). \n- For full-/high-speed isochronous endpoints, this value must be in the range from 1 to 16. The bInterval value is used as the exponent for a \f$ 2^(bInterval-1) \f$ value; e.g., a bInterval of 4 means a period of 8 (\f$ 2^(4-1) \f$). \n- For full-/low-speed interrupt endpoints, the value of this field may be from 1 to 255. \n- For high-speed interrupt endpoints, the bInterval value is used as the exponent for a \f$ 2^(bInterval-1) \f$ value; e.g., a bInterval of 4 means a period of 8 (\f$ 2^(4-1) \f$) . This value must be from 1 to 16. \n- For high-speed bulk/control OUT endpoints, the bInterval must specify the maximum NAK rate of the endpoint. A value of 0 indicates the endpoint never NAKs. Other values indicate at most 1 NAK each bInterval number of microframes. This value must be in the range from 0 to 255. \n Refer to Chapter 5 of USB 2.0 specification for more information.
} tusb_descriptor_endpoint_t;