clang work with lpc55

examples/device/msc_dual_lun/src/main.c

@@ -50,8 +50,7 @@ static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED;
 void led_blinking_task(void);
 
 /*------------- MAIN -------------*/
-int main(void)
+int main(void) {
-{
   board_init();
 
   // init device stack on configured roothub port
@@ -61,8 +60,7 @@ int main(void)
     board_init_after_tusb();
   }
 
-  while (1)
+  while (1) {
-  {
     tud_task(); // tinyusb device task
     led_blinking_task();
   }
@@ -73,37 +71,32 @@ int main(void)
 //--------------------------------------------------------------------+
 
 // Invoked when device is mounted
-void tud_mount_cb(void)
+void tud_mount_cb(void) {
-{
   blink_interval_ms = BLINK_MOUNTED;
 }
 
 // Invoked when device is unmounted
-void tud_umount_cb(void)
+void tud_umount_cb(void) {
-{
   blink_interval_ms = BLINK_NOT_MOUNTED;
 }
 
 // Invoked when usb bus is suspended
 // remote_wakeup_en : if host allow us  to perform remote wakeup
 // Within 7ms, device must draw an average of current less than 2.5 mA from bus
-void tud_suspend_cb(bool remote_wakeup_en)
+void tud_suspend_cb(bool remote_wakeup_en) {
-{
   (void) remote_wakeup_en;
   blink_interval_ms = BLINK_SUSPENDED;
 }
 
 // Invoked when usb bus is resumed
-void tud_resume_cb(void)
+void tud_resume_cb(void) {
-{
   blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED;
 }
 
 //--------------------------------------------------------------------+
 // BLINKING TASK
 //--------------------------------------------------------------------+
-void led_blinking_task(void)
+void led_blinking_task(void) {
-{
   static uint32_t start_ms = 0;
   static bool led_state = false;
 

hw/bsp/lpc55/family.c

@@ -72,13 +72,11 @@
 //--------------------------------------------------------------------+
 // Forward USB interrupt events to TinyUSB IRQ Handler
 //--------------------------------------------------------------------+
-void USB0_IRQHandler(void)
+void USB0_IRQHandler(void) {
-{
   tud_int_handler(0);
 }
 
-void USB1_IRQHandler(void)
+void USB1_IRQHandler(void) {
-{
   tud_int_handler(1);
 }
 
@@ -92,8 +90,7 @@ settings:
 sources:
 - {id: SYSCON.fro_hf.outFreq, value: 96 MHz}
 ******************************************************************/
-void BootClockFROHF96M(void)
+void BootClockFROHF96M(void) {
-{
   /*!< Set up the clock sources */
   /*!< Set up FRO */
   POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on  */
@@ -116,8 +113,7 @@ void BootClockFROHF96M(void)
   SystemCoreClock = 96000000U;
 }
 
-void board_init(void)
+void board_init(void) {
-{
   // Enable IOCON clock
   CLOCK_EnableClock(kCLOCK_Iocon);
 
@@ -250,8 +246,7 @@ void board_init(void)
 // Board porting API
 //--------------------------------------------------------------------+
 
-void board_led_write(bool state)
+void board_led_write(bool state) {
-{
   GPIO_PinWrite(GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON));
 
 #ifdef NEOPIXEL_PIN
@@ -266,33 +261,50 @@ void board_led_write(bool state)
 #endif
 }
 
-uint32_t board_button_read(void)
+uint32_t board_button_read(void) {
-{
   // active low
   return BUTTON_STATE_ACTIVE == GPIO_PinRead(GPIO, BUTTON_PORT, BUTTON_PIN);
 }
 
-int board_uart_read(uint8_t* buf, int len)
+int board_uart_read(uint8_t* buf, int len) {
-{
+  (void) buf;
-  (void) buf; (void) len;
+  (void) len;
   return 0;
 }
 
-int board_uart_write(void const * buf, int len)
+int board_uart_write(void const* buf, int len) {
-{
   USART_WriteBlocking(UART_DEV, (uint8_t const*) buf, len);
   return len;
 }
 
 #if CFG_TUSB_OS == OPT_OS_NONE
 volatile uint32_t system_ticks = 0;
-void SysTick_Handler(void)
+
-{
+void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void)
+uint32_t board_millis(void) {
-{
   return system_ticks;
 }
 #endif
+
+
+#ifndef __ICCARM__
+// Implement _start() since we use linker flag '-nostartfiles'.
+// Requires defined __STARTUP_CLEAR_BSS,
+extern int main(void);
+
+TU_ATTR_UNUSED void _start(void) {
+  // called by startup code
+  main();
+  while (1) {}
+}
+
+#ifdef __clang__
+void	_exit (int __status) {
+  while (1) {}
+}
+#endif
+
+#endif

hw/bsp/lpc55/family.cmake

@@ -1,9 +1,5 @@
 include_guard()
 
-if (NOT BOARD)
-  message(FATAL_ERROR "BOARD not specified")
-endif ()
-
 set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk)
 set(CMSIS_DIR ${TOP}/lib/CMSIS_5)
 
@@ -32,7 +28,18 @@ function(add_board_target BOARD_TARGET)
     return()
   endif()
 
+  if (NOT DEFINED LD_FILE_GNU)
+    set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld)
+  endif ()
+  set(LD_FILE_Clang ${LD_FILE_GNU})
+
+  if (NOT DEFINED STARTUP_FILE_GNU)
+    set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S)
+  endif ()
+  set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU})
+
   add_library(${BOARD_TARGET} STATIC
+    ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
     # driver
     ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c
     ${SDK_DIR}/drivers/common/fsl_common_arm.c
@@ -44,12 +51,27 @@ function(add_board_target BOARD_TARGET)
     ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_power.c
     ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c
     )
-
+  target_include_directories(${BOARD_TARGET} PUBLIC
+    ${TOP}/lib/sct_neopixel
+    # driver
+    ${SDK_DIR}/drivers/common
+    ${SDK_DIR}/drivers/flexcomm
+    ${SDK_DIR}/drivers/lpc_iocon
+    ${SDK_DIR}/drivers/lpc_gpio
+    ${SDK_DIR}/drivers/lpuart
+    ${SDK_DIR}/drivers/sctimer
+    # mcu
+    ${SDK_DIR}/devices/${MCU_VARIANT}
+    ${SDK_DIR}/devices/${MCU_VARIANT}/drivers
+    ${CMSIS_DIR}/CMSIS/Core/Include
+    )
   target_compile_definitions(${BOARD_TARGET} PUBLIC
     CFG_TUSB_MEM_ALIGN=TU_ATTR_ALIGNED\(64\)
     BOARD_TUD_RHPORT=${PORT}
     BOARD_TUH_RHPORT=${HOST_PORT}
+    __STARTUP_CLEAR_BSS
     )
+
   # Port 0 is Fullspeed, Port 1 is Highspeed. Port1 controller can only access USB_SRAM
   if (PORT EQUAL 1)
     target_compile_definitions(${BOARD_TARGET} PUBLIC
@@ -65,42 +87,17 @@ function(add_board_target BOARD_TARGET)
       )
   endif ()
 
-  target_include_directories(${BOARD_TARGET} PUBLIC
-    ${TOP}/lib/sct_neopixel
-    # driver
-    ${SDK_DIR}/drivers/common
-    ${SDK_DIR}/drivers/flexcomm
-    ${SDK_DIR}/drivers/lpc_iocon
-    ${SDK_DIR}/drivers/lpc_gpio
-    ${SDK_DIR}/drivers/lpuart
-    ${SDK_DIR}/drivers/sctimer
-    # mcu
-    ${CMSIS_DIR}/CMSIS/Core/Include
-    ${SDK_DIR}/devices/${MCU_VARIANT}
-    ${SDK_DIR}/devices/${MCU_VARIANT}/drivers
-    )
-
   update_board(${BOARD_TARGET})
 
-  if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID})
-    set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld)
-  endif ()
-
-  if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID})
-    set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S)
-  endif ()
-
-  target_sources(${BOARD_TARGET} PUBLIC
-    ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
-    )
-
   if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
     target_link_options(${BOARD_TARGET} PUBLIC
-      # linker file
       "LINKER:--script=${LD_FILE_GNU}"
-      # nanolib
+      --specs=nosys.specs --specs=nano.specs
-      --specs=nosys.specs
+      -nostartfiles
-      --specs=nano.specs
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_Clang}"
       )
   elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
     target_link_options(${BOARD_TARGET} PUBLIC

src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c

@@ -239,7 +239,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool ep_is_iso(ep_cmd_sts_t* ep_cs, bool is_
   return is_highspeed ? (ep_cs[0].cmd_sts.type && !ep_cs[0].cmd_sts.rf_tv) : ep_cs->cmd_sts.type;
 }
 
-TU_ATTR_ALWAYS_INLINE static inline bool ep_is_bulk(ep_cmd_sts_t* ep_cs) {
+TU_ATTR_ALWAYS_INLINE TU_ATTR_UNUSED static inline bool ep_is_bulk(ep_cmd_sts_t* ep_cs) {
   return (ep_cs[0].cmd_sts.type == 0) && (ep_cs[0].cmd_sts.rf_tv == 0);
 }